diff options
Diffstat (limited to 'arch')
84 files changed, 827 insertions, 137 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 659bdd079277..44a44b49eb3a 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -96,6 +96,7 @@ config KPROBES_ON_FTRACE config UPROBES def_bool n + depends on ARCH_SUPPORTS_UPROBES help Uprobes is the user-space counterpart to kprobes: they enable instrumentation applications (such as 'perf probe') diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h index 9e46d6e656d9..afc901b7a6f6 100644 --- a/arch/alpha/include/uapi/asm/socket.h +++ b/arch/alpha/include/uapi/asm/socket.h @@ -97,4 +97,6 @@ #define SO_CNX_ADVICE 53 +#define SCM_TIMESTAMPING_OPT_STATS 54 + #endif /* _UAPI_ASM_SOCKET_H */ diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 064b322a7a04..3b23b32e1b30 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -59,15 +59,17 @@ &davinci_mdio { dp83867_0: ethernet-phy@2 { reg = <2>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; }; dp83867_1: ethernet-phy@3 { reg = <3>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-imepdance; }; }; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index fdcc23d203e5..0da76c5ff6d7 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -436,18 +436,20 @@ }; gmac0: ethernet@1840000 { - compatible = "hisilicon,hix5hd2-gmac"; + compatible = "hisilicon,hix5hd2-gemac", "hisilicon,hisi-gemac-v1"; reg = <0x1840000 0x1000>,<0x184300c 0x4>; interrupts = <0 71 4>; clocks = <&clock HIX5HD2_MAC0_CLK>; + clock-names = "mac_core"; status = "disabled"; }; gmac1: ethernet@1841000 { - compatible = "hisilicon,hix5hd2-gmac"; + compatible = "hisilicon,hix5hd2-gemac", "hisilicon,hisi-gemac-v1"; reg = <0x1841000 0x1000>,<0x1843010 0x4>; interrupts = <0 72 4>; clocks = <&clock HIX5HD2_MAC1_CLK>; + clock-names = "mac_core"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 0d7d5ac6257b..2b6cb05bc01a 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -643,9 +643,8 @@ reg = <0x30730000 0x10000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "pix", "axi", "disp_axi"; + <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>; + clock-names = "pix", "axi"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts index 1cf644bfd7ea..51dc734cd5b9 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts @@ -82,6 +82,10 @@ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; +&sata { + nr-ports = <2>; +}; + &ehci1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 75a865406d3e..f4ba088b225e 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -410,7 +410,7 @@ }; uart3_pins: uart3 { - allwinner,pins = "PG13", "PG14"; + allwinner,pins = "PA13", "PA14"; allwinner,function = "uart3"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 5c1fcab4a6f7..1552db00cc59 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -88,10 +88,16 @@ switch0: switch0@0 { compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0>; dsa,member = <0 0>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; ports { #address-cells = <1>; @@ -99,16 +105,19 @@ port@0 { reg = <0>; label = "lan0"; + phy-handle = <&switch0phy0>; }; port@1 { reg = <1>; label = "lan1"; + phy-handle = <&switch0phy1>; }; port@2 { reg = <2>; label = "lan2"; + phy-handle = <&switch0phy2>; }; switch0port5: port@5 { @@ -133,6 +142,24 @@ }; }; }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch0phy0: switch0phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + switch0phy1: switch1phy0@1 { + reg = <1>; + interrupt-parent = <&switch0>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; + switch0phy2: switch1phy0@2 { + reg = <2>; + interrupt-parent = <&switch0>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + }; }; }; @@ -143,10 +170,16 @@ switch1: switch1@0 { compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pinctrl_gpio_switch1>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0>; dsa,member = <0 1>; + interrupt-parent = <&gpio0>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; ports { #address-cells = <1>; @@ -196,12 +229,18 @@ #size-cells = <0>; switch1phy0: switch1phy0@0 { reg = <0>; + interrupt-parent = <&switch1>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; switch1phy1: switch1phy0@1 { reg = <1>; + interrupt-parent = <&switch1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; switch1phy2: switch1phy0@2 { reg = <2>; + interrupt-parent = <&switch1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; }; }; @@ -636,6 +675,18 @@ >; }; + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTB5__GPIO_27 0x219d + >; + }; + + pinctrl_gpio_switch1: pinctrl-gpio-switch1 { + fsl,pins = < + VF610_PAD_PTB4__GPIO_26 0x219d + >; + }; + pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { fsl,pins = < VF610_PAD_PTE14__GPIO_119 0x31c2 diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 66070acaa888..d1db32b1a2c6 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -85,6 +85,7 @@ static struct resource smc91x_resources[] = { static struct smc91x_platdata smc91x_platdata = { .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT, + .pxa_u16_align4 = true, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 40964069a17c..a2d851a3a546 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -140,6 +140,7 @@ static struct resource smc91x_resources[] = { static struct smc91x_platdata mainstone_smc91x_info = { .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA, + .pxa_u16_align4 = true, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 702f4f14b708..7b6610e9dae4 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -673,6 +673,7 @@ static struct resource smc91x_resources[] = { static struct smc91x_platdata stargate2_smc91x_info = { .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA, + .pxa_u16_align4 = true, }; static struct platform_device smc91x_device = { diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts index b09f3bc5c6c1..c4d544244b19 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts @@ -56,6 +56,10 @@ }; }; +&enet { + status = "ok"; +}; + &pci_phy0 { status = "ok"; }; @@ -174,6 +178,7 @@ &mdio_mux_iproc { mdio@10 { gphy0: eth-phy@10 { + enet-phy-lane-swap; reg = <0x10>; }; }; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index d95dc408629a..773ed593da4d 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -191,6 +191,18 @@ #include "ns2-clock.dtsi" + enet: ethernet@61000000 { + compatible = "brcm,ns2-amac"; + reg = <0x61000000 0x1000>, + <0x61090000 0x1000>, + <0x61030000 0x100>; + reg-names = "amac_base", "idm_base", "nicpm_base"; + interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + phy-handle = <&gphy0>; + phy-mode = "rgmii"; + status = "disabled"; + }; + dma0: dma@61360000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x61360000 0x1000>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 1372e9a6aaa4..a59d36cd6caf 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -81,3 +81,26 @@ &pcie0 { status = "okay"; }; + +&mdio { + status = "okay"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +ð0 { + phy-mode = "rgmii-id"; + phy = <&phy0>; + status = "okay"; +}; + +ð1 { + phy-mode = "sgmii"; + phy = <&phy1>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index e9bd58793464..3b8eb45bdc76 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/ |