diff options
Diffstat (limited to 'arch/x86')
110 files changed, 2418 insertions, 1557 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index efb42949cc09..5731eb70e0a0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -26,6 +26,8 @@ config X86 select HAVE_IOREMAP_PROT select HAVE_KPROBES select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP + select ARCH_DISCARD_MEMBLOCK select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_FRAME_POINTERS select HAVE_DMA_ATTRS @@ -204,9 +206,6 @@ config ZONE_DMA32 bool default X86_64 -config ARCH_POPULATES_NODE_MAP - def_bool y - config AUDIT_ARCH bool default X86_64 @@ -343,6 +342,7 @@ config X86_EXTENDED_PLATFORM If you enable this option then you'll be able to select support for the following (non-PC) 64 bit x86 platforms: + Numascale NumaChip ScaleMP vSMP SGI Ultraviolet @@ -351,6 +351,18 @@ config X86_EXTENDED_PLATFORM endif # This is an alphabetically sorted list of 64 bit extended platforms # Please maintain the alphabetic order if and when there are additions +config X86_NUMACHIP + bool "Numascale NumaChip" + depends on X86_64 + depends on X86_EXTENDED_PLATFORM + depends on NUMA + depends on SMP + depends on X86_X2APIC + depends on !EDAC_AMD64 + ---help--- + Adds support for Numascale NumaChip large-SMP systems. Needed to + enable more than ~168 cores. + If you don't have one of these, you should say N here. config X86_VSMP bool "ScaleMP vSMP" diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index a6253ec1b284..3e274564f6bf 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -134,7 +134,7 @@ ENTRY(ia32_sysenter_target) CFI_REL_OFFSET rsp,0 pushfq_cfi /*CFI_REL_OFFSET rflags,0*/ - movl 8*3-THREAD_SIZE+TI_sysenter_return(%rsp), %r10d + movl TI_sysenter_return+THREAD_INFO(%rsp,3*8-KERNEL_STACK_OFFSET),%r10d CFI_REGISTER rip,r10 pushq_cfi $__USER32_CS /*CFI_REL_OFFSET cs,0*/ @@ -150,9 +150,8 @@ ENTRY(ia32_sysenter_target) .section __ex_table,"a" .quad 1b,ia32_badarg .previous - GET_THREAD_INFO(%r10) - orl $TS_COMPAT,TI_status(%r10) - testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10) + orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) CFI_REMEMBER_STATE jnz sysenter_tracesys cmpq $(IA32_NR_syscalls-1),%rax @@ -162,13 +161,12 @@ sysenter_do_call: sysenter_dispatch: call *ia32_sys_call_table(,%rax,8) movq %rax,RAX-ARGOFFSET(%rsp) - GET_THREAD_INFO(%r10) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - testl $_TIF_ALLWORK_MASK,TI_flags(%r10) + testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jnz sysexit_audit sysexit_from_sys_call: - andl $~TS_COMPAT,TI_status(%r10) + andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET) /* clear IF, that popfq doesn't enable interrupts early */ andl $~0x200,EFLAGS-R11(%rsp) movl RIP-R11(%rsp),%edx /* User %eip */ @@ -205,7 +203,7 @@ sysexit_from_sys_call: .endm .macro auditsys_exit exit - testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10) + testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jnz ia32_ret_from_sys_call TRACE_IRQS_ON sti @@ -215,12 +213,11 @@ sysexit_from_sys_call: movzbl %al,%edi /* zero-extend that into %edi */ inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */ call audit_syscall_exit - GET_THREAD_INFO(%r10) movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall return value */ movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi cli TRACE_IRQS_OFF - testl %edi,TI_flags(%r10) + testl %edi,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jz \exit CLEAR_RREGS -ARGOFFSET jmp int_with_check @@ -238,7 +235,7 @@ sysexit_audit: sysenter_tracesys: #ifdef CONFIG_AUDITSYSCALL - testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10) + testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jz sysenter_auditsys #endif SAVE_REST @@ -309,9 +306,8 @@ ENTRY(ia32_cstar_target) .section __ex_table,"a" .quad 1b,ia32_badarg .previous - GET_THREAD_INFO(%r10) - orl $TS_COMPAT,TI_status(%r10) - testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10) + orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) CFI_REMEMBER_STATE jnz cstar_tracesys cmpq $IA32_NR_syscalls-1,%rax @@ -321,13 +317,12 @@ cstar_do_call: cstar_dispatch: call *ia32_sys_call_table(,%rax,8) movq %rax,RAX-ARGOFFSET(%rsp) - GET_THREAD_INFO(%r10) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - testl $_TIF_ALLWORK_MASK,TI_flags(%r10) + testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jnz sysretl_audit sysretl_from_sys_call: - andl $~TS_COMPAT,TI_status(%r10) + andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET) RESTORE_ARGS 0,-ARG_SKIP,0,0,0 movl RIP-ARGOFFSET(%rsp),%ecx CFI_REGISTER rip,rcx @@ -355,7 +350,7 @@ sysretl_audit: cstar_tracesys: #ifdef CONFIG_AUDITSYSCALL - testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10) + testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jz cstar_auditsys #endif xchgl %r9d,%ebp @@ -420,9 +415,8 @@ ENTRY(ia32_syscall) /* note the registers are not zero extended to the sf. this could be a problem. */ SAVE_ARGS 0,1,0 - GET_THREAD_INFO(%r10) - orl $TS_COMPAT,TI_status(%r10) - testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10) + orl $TS_COMPAT,TI_status |