diff options
Diffstat (limited to 'arch/x86/kernel')
-rw-r--r-- | arch/x86/kernel/Makefile | 1 | ||||
-rw-r--r-- | arch/x86/kernel/umip.c | 321 |
2 files changed, 322 insertions, 0 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 295abaa58add..81bb565f4497 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -127,6 +127,7 @@ obj-$(CONFIG_EFI) += sysfb_efi.o obj-$(CONFIG_PERF_EVENTS) += perf_regs.o obj-$(CONFIG_TRACING) += tracepoint.o obj-$(CONFIG_SCHED_MC_PRIO) += itmt.o +obj-$(CONFIG_X86_INTEL_UMIP) += umip.o obj-$(CONFIG_UNWINDER_ORC) += unwind_orc.o obj-$(CONFIG_UNWINDER_FRAME_POINTER) += unwind_frame.o diff --git a/arch/x86/kernel/umip.c b/arch/x86/kernel/umip.c new file mode 100644 index 000000000000..d80b816228ea --- /dev/null +++ b/arch/x86/kernel/umip.c @@ -0,0 +1,321 @@ +/* + * umip.c Emulation for instruction protected by the Intel User-Mode + * Instruction Prevention feature + * + * Copyright (c) 2017, Intel Corporation. + * Ricardo Neri <ricardo.neri-calderon@linux.intel.com> + */ + +#include <linux/uaccess.h> +#include <asm/umip.h> +#include <asm/traps.h> +#include <asm/insn.h> +#include <asm/insn-eval.h> + +/** DOC: Emulation for User-Mode Instruction Prevention (UMIP) + * + * The feature User-Mode Instruction Prevention present in recent Intel + * processor prevents a group of instructions (sgdt, sidt, sldt, smsw, and str) + * from being executed with CPL > 0. Otherwise, a general protection fault is + * issued. + * + * Rather than relaying to the user space the general protection fault caused by + * the UMIP-protected instructions (in the form of a SIGSEGV signal), it can be + * trapped and emulate the result of such instructions to provide dummy values. + * This allows to both conserve the current kernel behavior and not reveal the + * system resources that UMIP intends to protect (i.e., the locations of the + * global descriptor and interrupt descriptor tables, the segment selectors of + * the local descriptor table, the value of the task state register and the + * contents of the CR0 register). + * + * This emulation is needed because certain applications (e.g., WineHQ and + * DOSEMU2) rely on this subset of instructions to function. + * + * The instructions protected by UMIP can be split in two groups. Those which + * return a kernel memory address (sgdt and sidt) and those which return a + * value (sldt, str and smsw). + * + * For the instructions that return a kernel memory address, applications + * such as WineHQ rely on the result being located in the kernel memory space, + * not the actual location of the table. The result is emulated as a hard-coded + * value that, lies close to the top of the kernel memory. The limit for the GDT + * and the IDT are set to zero. + * + * Given that sldt and str are not commonly used in programs that run on WineHQ + * or DOSEMU2, they are not emulated. + * + * The instruction smsw is emulated to return the value that the register CR0 + * has at boot time as set in the head_32. + * + * Also, emulation is provided only for 32-bit processes; 64-bit processes + * that attempt to use the instructions that UMIP protects will receive the + * SIGSEGV signal issued as a consequence of the general protection fault. + * + * Care is taken to appropriately emulate the results when segmentation is + * used. That is, rather than relying on USER_DS and USER_CS, the function + * insn_get_addr_ref() inspects the segment descriptor pointed by the + * registers in pt_regs. This ensures that we correctly obtain the segment + * base address and the address and operand sizes even if the user space + * application uses a local descriptor table. + */ + +#define UMIP_DUMMY_GDT_BASE 0xfffe0000 +#define UMIP_DUMMY_IDT_BASE 0xffff0000 + +/* + * The SGDT and SIDT instructions store the contents of the global descriptor + * table and interrupt table registers, respectively. The destination is a + * memory operand of X+2 bytes. X bytes are used to store the base address of + * the table and 2 bytes are used to store the limit. In 32-bit processes, the + * only processes for which emulation is provided, X has a value of 4. + */ +#define UMIP_GDT_IDT_BASE_SIZE 4 +#define UMIP_GDT_IDT_LIMIT_SIZE 2 + +#define UMIP_INST_SGDT 0 /* 0F 01 /0 */ +#define UMIP_INST_SIDT 1 /* 0F 01 /1 */ +#define UMIP_INST_SMSW 3 /* 0F 01 /4 */ + +/** + * identify_insn() - Identify a UMIP-protected instruction + * @insn: Instruction structure with opcode and ModRM byte. + * + * From the opcode and ModRM.reg in @insn identify, if any, a UMIP-protected + * instruction that can be emulated. + * + * Returns: + * + * On success, a constant identifying a specific UMIP-protected instruction that + * can be emulated. + * + * -EINVAL on error or when not an UMIP-protected instruction that can be + * emulated. + */ +static int identify_insn(struct insn *insn) +{ + /* By getting modrm we also get the opcode. */ + insn_get_modrm(insn); + + if (!insn->modrm.nbytes) + return -EINVAL; + + /* All the instructions of interest start with 0x0f. */ + if (insn->opcode.bytes[0] != 0xf) + return -EINVAL; + + if (insn->opcode.bytes[1] == 0x1) { + switch (X86_MODRM_REG(insn->modrm.value)) { + case 0: + return UMIP_INST_SGDT; + case 1: + return UMIP_INST_SIDT; + case 4: + return UMIP_INST_SMSW; + default: + return -EINVAL; + } + } + + /* SLDT AND STR are not emulated */ + return -EINVAL; +} + +/** + * emulate_umip_insn() - Emulate UMIP instructions and return dummy values + * @insn: Instruction structure with operands + * @umip_inst: A constant indicating the instruction to emulate + * @data: Buffer into which the dummy result is stored + * @data_size: Size of the emulated result + * + * Emulate an instruction protected by UMIP and provide a dummy result. The + * result of the emulation is saved in @data. The size of the results depends + * on both the instruction and type of operand (register vs memory address). + * The size of the result is updated in @data_size. Caller is responsible + * of providing a @data buffer of at least UMIP_GDT_IDT_BASE_SIZE + + * UMIP_GDT_IDT_LIMIT_SIZE bytes. + * + * Returns: + * + * 0 on success, -EINVAL on error while emulating. + */ +static int emulate_umip_insn(struct insn *insn, int umip_inst, + unsigned char *data, int *data_size) +{ + unsigned long dummy_base_addr, dummy_value; + unsigned short dummy_limit = 0; + + if (!data || !data_size || !insn) + return -EINVAL; + /* + * These two instructions return the base address and limit of the + * global and interrupt descriptor table, respectively. According to the + * Intel Software Development manual, the base address can be 24-bit, + * 32-bit or 64-bit. Limit is always 16-bit. If the operand size is + * 16-bit, the returned value of the base address is supposed to be a + * zero-extended 24-byte number. However, it seems that a 32-byte number + * is always returned irrespective of the operand size. + */ + if (umip_inst == UMIP_INST_SGDT || umip_inst == UMIP_INST_SIDT) { + /* SGDT and SIDT do not use registers operands. */ + if (X86_MODRM_MOD(insn->modrm.value) == 3) + return -EINVAL; + + if (umip_inst == UMIP_INST_SGDT) + dummy_base_addr = UMIP_DUMMY_GDT_BASE; + else + dummy_base_addr = UMIP_DUMMY_IDT_BASE; + + *data_size = UMIP_GDT_IDT_LIMIT_SIZE + UMIP_GDT_IDT_BASE_SIZE; + + memcpy(data + 2, &dummy_base_addr, UMIP_GDT_IDT_BASE_SIZE); + memcpy(data, &dummy_limit, UMIP_GDT_IDT_LIMIT_SIZE); + + } else if (umip_inst == UMIP_INST_SMSW) { + dummy_value = CR0_STATE; + + /* + * Even though the CR0 register has 4 bytes, the number + * of bytes to be copied in the result buffer is determined + * by whether the operand is a register or a memory location. + * If operand is a register, return as many bytes as the operand + * size. If operand is memory, return only the two least + * siginificant bytes of CR0. + */ + if (X86_MODRM_MOD(insn->modrm.value) == 3) + *data_size = insn->opnd_bytes; + else + *data_size = 2; + + memcpy(data, &dummy_value, *data_size); + /* STR and SLDT are not emulated */ + } else { + return -EINVAL; + } + + return 0; +} + +/** + * fixup_umip_exception() - Fixup a general protection fault caused by UMIP + * @regs: Registers as saved when entering the #GP handler + * + * The instructions sgdt, sidt, str, smsw, sldt cause a general protection + * fault if executed with CPL > 0 (i.e., from user space). If the offending + * user-space process is not in long mode, this function fixes the exception + * up and provides dummy results for sgdt, sidt and smsw; str and sldt are not + * fixed up. Also long mode user-space processes are not fixed up. + * + * If operands are memory addresses, results are copied to user-space memory as + * indicated by the instruction pointed by eIP using the registers indicated in + * the instruction operands. If operands are registers, results are copied into + * the context that was saved when entering kernel mode. + * + * Returns: + * + * True if emulation was successful; false if not. + */ +bool fixup_umip_exception(struct pt_regs *regs) +{ + int not_copied, nr_copied, reg_offset, dummy_data_size, umip_inst; + unsigned long seg_base = 0, *reg_addr; + /* 10 bytes is the maximum size of the result of UMIP instructions */ + unsigned char dummy_data[10] = { 0 }; + unsigned char buf[MAX_INSN_SIZE]; + void __user *uaddr; + struct insn insn; + char seg_defs; + + if (!regs) + return false; + + /* Do not emulate 64-bit processes. */ + if (user_64bit_mode(regs)) + return false; + + /* + * If not in user-space long mode, a custom code segment could be in + * use. This is true in protected mode (if the process defined a local + * descriptor table), or virtual-8086 mode. In most of the cases + * seg_base will be zero as in USER_CS. + */ + if (!user_64bit_mode(regs)) + seg_base = insn_get_seg_base(regs, INAT_SEG_REG_CS); + + if (seg_base == -1L) + return false; + + not_copied = copy_from_user(buf, (void __user *)(seg_base + regs->ip), + sizeof(buf)); + nr_copied = sizeof(buf) - not_copied; + + /* + * The copy_from_user above could have failed if user code is protected + * by a memory protection key. Give up on emulation in such a case. + * Should we issue a page fault? + */ + if (!nr_copied) + return false; + + insn_init(&insn, buf, nr_copied, user_64bit_mode(regs)); + + /* + * Override the default operand and address sizes with what is specified + * in the code segment descriptor. The instruction decoder only sets + * the address size it to either 4 or 8 address bytes and does nothing + * for the operand bytes. This OK for most of the cases, but we could + * have special cases where, for instance, a 16-bit code segment + * descriptor is used. + * If there is an address override prefix, the instruction decoder + * correctly updates these values, even for 16-bit defaults. + */ + seg_defs = insn_get_code_seg_params(regs); + if (seg_defs == -EINVAL) + return false; + + insn.addr_bytes = INSN_CODE_SEG_ADDR_SZ(seg_defs); + insn.opnd_bytes = INSN_CODE_SEG_OPND_SZ(seg_defs); + + insn_get_length(&insn); + if (nr_copied < insn.length) + return false; + + umip_inst = identify_insn(&insn); + if (umip_inst < 0) + return false; + + if (emulate_umip_insn(&insn, umip_inst, dummy_data, &dummy_data_size)) + return false; + + /* + * If operand is a register, write result to the copy of the register + * value that was pushed to the stack when entering into kernel mode. + * Upon exit, the value we write will be restored to the actual hardware + * register. + */ + if (X86_MODRM_MOD(insn.modrm.value) == 3) { + reg_offset = insn_get_modrm_rm_off(&insn, regs); + + /* + * Negative values are usually errors. In memory addressing, + * the exception is -EDOM. Since we expect a register operand, + * all negative values are errors. + */ + if (reg_offset < 0) + return false; + + reg_addr = (unsigned long *)((unsigned long)regs + reg_offset); + memcpy(reg_addr, dummy_data, dummy_data_size); + } else { + uaddr = insn_get_addr_ref(&insn, regs); + if ((unsigned long)uaddr == -1L) + return false; + + nr_copied = copy_to_user(uaddr, dummy_data, dummy_data_size); + if (nr_copied > 0) + return false; + } + + /* increase IP to let the program keep going */ + regs->ip += insn.length; + return true; +} |