diff options
Diffstat (limited to 'arch/powerpc')
34 files changed, 1259 insertions, 335 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index d500772a1d9b..b580ce0c25a8 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -94,6 +94,7 @@ config PPC select OF_RESERVED_MEM select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE + select HAVE_DYNAMIC_FTRACE_WITH_REGS if MPROFILE_KERNEL select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER select SYSCTL_EXCEPTION_TRACE @@ -373,6 +374,24 @@ config PPC_TRANSACTIONAL_MEM ---help--- Support user-mode Transactional Memory on POWERPC. +config DISABLE_MPROFILE_KERNEL + bool "Disable use of mprofile-kernel for kernel tracing" + depends on PPC64 && CPU_LITTLE_ENDIAN + default y + help + Selecting this options disables use of the mprofile-kernel ABI for + kernel tracing. That will cause options such as live patching + (CONFIG_LIVEPATCH) which depend on CONFIG_DYNAMIC_FTRACE_WITH_REGS to + be disabled also. + + If you have a toolchain which supports mprofile-kernel, then you can + enable this. Otherwise leave it disabled. If you're not sure, say + "N". + +config MPROFILE_KERNEL + depends on PPC64 && CPU_LITTLE_ENDIAN + def_bool !DISABLE_MPROFILE_KERNEL + config IOMMU_HELPER def_bool PPC64 diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 1a0ee01b0f46..709a22a3e824 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -133,6 +133,21 @@ else CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64 endif +ifdef CONFIG_MPROFILE_KERNEL + ifeq ($(shell $(srctree)/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh $(CC) -I$(srctree)/include -D__KERNEL__),OK) + CC_FLAGS_FTRACE := -pg -mprofile-kernel + KBUILD_CPPFLAGS += -DCC_USING_MPROFILE_KERNEL + else + # If the user asked for mprofile-kernel but the toolchain doesn't + # support it, emit a warning and deliberately break the build later + # with mprofile-kernel-not-supported. We would prefer to make this an + # error right here, but then the user would never be able to run + # oldconfig to change their configuration. + $(warning Compiler does not support mprofile-kernel, set CONFIG_DISABLE_MPROFILE_KERNEL) + CC_FLAGS_FTRACE := -mprofile-kernel-not-supported + endif +endif + CFLAGS-$(CONFIG_CELL_CPU) += $(call cc-option,-mcpu=cell) CFLAGS-$(CONFIG_POWER4_CPU) += $(call cc-option,-mcpu=power4) CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5) diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h index 840a5509b3f1..994c60a857ce 100644 --- a/arch/powerpc/include/asm/code-patching.h +++ b/arch/powerpc/include/asm/code-patching.h @@ -99,4 +99,25 @@ static inline unsigned long ppc_global_function_entry(void *func) #endif } +#ifdef CONFIG_PPC64 +/* + * Some instruction encodings commonly used in dynamic ftracing + * and function live patching. + */ + +/* This must match the definition of STK_GOT in <asm/ppc_asm.h> */ +#if defined(_CALL_ELF) && _CALL_ELF == 2 +#define R2_STACK_OFFSET 24 +#else +#define R2_STACK_OFFSET 40 +#endif + +#define PPC_INST_LD_TOC (PPC_INST_LD | ___PPC_RT(__REG_R2) | \ + ___PPC_RA(__REG_R1) | R2_STACK_OFFSET) + +/* usually preceded by a mflr r0 */ +#define PPC_INST_STD_LR (PPC_INST_STD | ___PPC_RS(__REG_R0) | \ + ___PPC_RA(__REG_R1) | PPC_LR_STKOFF) +#endif /* CONFIG_PPC64 */ + #endif /* _ASM_POWERPC_CODE_PATCHING_H */ diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index 867c39b45df6..fb9f376ae27b 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -72,6 +72,7 @@ struct pci_dn; #define EEH_PE_PHB (1 << 1) /* PHB PE */ #define EEH_PE_DEVICE (1 << 2) /* Device PE */ #define EEH_PE_BUS (1 << 3) /* Bus PE */ +#define EEH_PE_VF (1 << 4) /* VF PE */ #define EEH_PE_ISOLATED (1 << 0) /* Isolated PE */ #define EEH_PE_RECOVERING (1 << 1) /* Recovering PE */ @@ -136,11 +137,15 @@ struct eeh_dev { int pcix_cap; /* Saved PCIx capability */ int pcie_cap; /* Saved PCIe capability */ int aer_cap; /* Saved AER capability */ + int af_cap; /* Saved AF capability */ struct eeh_pe *pe; /* Associated PE */ struct list_head list; /* Form link list in the PE */ + struct list_head rmv_list; /* Record the removed edevs */ struct pci_controller *phb; /* Associated PHB */ struct pci_dn *pdn; /* Associated PCI device node */ struct pci_dev *pdev; /* Associated PCI device */ + bool in_error; /* Error flag for edev */ + struct pci_dev *physfn; /* Associated SRIOV PF */ struct pci_bus *bus; /* PCI bus for partial hotplug */ }; diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h index ef89b1465573..50ca7585abe2 100644 --- a/arch/powerpc/include/asm/ftrace.h +++ b/arch/powerpc/include/asm/ftrace.h @@ -46,6 +46,8 @@ extern void _mcount(void); #ifdef CONFIG_DYNAMIC_FTRACE +# define FTRACE_ADDR ((unsigned long)ftrace_caller) +# define FTRACE_REGS_ADDR FTRACE_ADDR static inline unsigned long ftrace_call_adjust(unsigned long addr) { /* reloction of mcount call site is the same as the address */ @@ -58,6 +60,9 @@ struct dyn_arch_ftrace { #endif /* CONFIG_DYNAMIC_FTRACE */ #endif /* __ASSEMBLY__ */ +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +#define ARCH_SUPPORTS_FTRACE_OPS 1 +#endif #endif #if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64) && !defined(__ASSEMBLY__) diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index e3b54dd4f730..0bc9c284aa10 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -94,6 +94,7 @@ #define H_SG_LIST -72 #define H_OP_MODE -73 #define H_COP_HW -74 +#define H_STATE -75 #define H_UNSUPPORTED_FLAG_START -256 #define H_UNSUPPORTED_FLAG_END -511 #define H_MULTI_THREADS_ACTIVE -9005 diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h index 5f1526fddccf..cd4ffd86765f 100644 --- a/arch/powerpc/include/asm/module.h +++ b/arch/powerpc/include/asm/module.h @@ -78,10 +78,18 @@ struct mod_arch_specific { # endif /* MODULE */ #endif -bool is_module_trampoline(u32 *insns); -int module_trampoline_target(struct module *mod, u32 *trampoline, +int module_trampoline_target(struct module *mod, unsigned long trampoline, unsigned long *target); +#ifdef CONFIG_DYNAMIC_FTRACE +int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sechdrs); +#else +static inline int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sechdrs) +{ + return 0; +} +#endif + struct exception_table_entry; void sort_ex_table(struct exception_table_entry *start, struct exception_table_entry *finish); diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index b0b43f5fbc5f..9f165e8a77bf 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -212,6 +212,7 @@ struct pci_dn { #define IODA_INVALID_PE (-1) #ifdef CONFIG_PPC_POWERNV int pe_number; + int vf_index; /* VF index in the PF */ #ifdef CONFIG_PCI_IOV u16 vfs_expanded; /* number of VFs IOV BAR expanded */ u16 num_vfs; /* number of VFs enabled*/ @@ -220,6 +221,7 @@ struct pci_dn { #define IODA_INVALID_M64 (-1) int (*m64_map)[PCI_SRIOV_NUM_BARS]; #endif /* CONFIG_PCI_IOV */ + int mps; /* Maximum Payload Size */ #endif struct list_head child_list; struct list_head list; diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h index 814622146d5a..e157489ee7a1 100644 --- a/arch/powerpc/include/asm/perf_event_server.h +++ b/arch/powerpc/include/asm/perf_event_server.h @@ -136,16 +136,24 @@ extern ssize_t power_events_sysfs_show(struct device *dev, * event 'cpu-cycles' can have two entries in sysfs: 'cpu-cycles' and * 'PM_CYC' where the latter is the name by which the event is known in * POWER CPU specification. + * + * Similarly, some hardware and cache events use the same event code. Eg. + * on POWER8, both "cache-references" and "L1-dcache-loads" events refer + * to the same event, PM_LD_REF_L1. The suffix, allows us to have two + * sysfs objects for the same event and thus two entries/aliases in sysfs. */ #define EVENT_VAR(_id, _suffix) event_attr_##_id##_suffix #define EVENT_PTR(_id, _suffix) &EVENT_VAR(_id, _suffix).attr.attr #define EVENT_ATTR(_name, _id, _suffix) \ - PMU_EVENT_ATTR(_name, EVENT_VAR(_id, _suffix), PME_##_id, \ + PMU_EVENT_ATTR(_name, EVENT_VAR(_id, _suffix), _id, \ power_events_sysfs_show) #define GENERIC_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _g) #define GENERIC_EVENT_PTR(_id) EVENT_PTR(_id, _g) +#define CACHE_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _c) +#define CACHE_EVENT_PTR(_id) EVENT_PTR(_id, _c) + #define POWER_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _p) #define POWER_EVENT_PTR(_id) EVENT_PTR(_id, _p) diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index a5e930aca804..abf5866e08c6 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -22,6 +22,18 @@ static inline int in_kernel_text(unsigned long addr) return 0; } +static inline unsigned long kernel_toc_addr(void) +{ + /* Defined by the linker, see vmlinux.lds.S */ + extern unsigned long __toc_start; + + /* + * The TOC register (r2) points 32kB into the TOC, so that 64kB of + * the TOC can be addressed using a single machine instruction. + */ + return (unsigned long)(&__toc_start) + 0x8000UL; +} + static inline int overlaps_interrupt_vector_text(unsigned long start, unsigned long end) { diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 794f22adf99d..2da380fcc34c 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -16,14 +16,14 @@ endif ifdef CONFIG_FUNCTION_TRACER # Do not trace early boot code -CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog -CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog -CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog -CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog +CFLAGS_REMOVE_cputable.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_prom_init.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_btext.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_prom.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) # do not trace tracer code -CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog +CFLAGS_REMOVE_ftrace.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) # timers used by tracing -CFLAGS_REMOVE_time.o = -pg -mno-sched-epilog +CFLAGS_REMOVE_time.o = -mno-sched-epilog $(CC_FLAGS_FTRACE) endif obj-y := cputable.o ptrace.o syscalls.o \ diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 8c6005cf1583..6544017eb90b 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -268,13 +268,6 @@ static void *eeh_dump_pe_log(void *data, void *flag) struct eeh_dev *edev, *tmp; size_t *plen = flag; - /* If the PE's config space is blocked, 0xFF's will be - * returned. It's pointless to collect the log in this - * case. - */ - if (pe->state & EEH_PE_CFG_BLOCKED) - return NULL; - eeh_pe_for_each_dev(pe, edev, tmp) *plen += eeh_dump_dev_log(edev, pci_regs_buf + *plen, EEH_PCI_REGS_LOG_LEN - *plen); @@ -677,7 +670,7 @@ int eeh_pci_enable(struct eeh_pe *pe, int function) /* Check if the request is finished successfully */ if (active_flag) { rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC); - if (rc <= 0) + if (rc < 0) return rc; if (rc & active_flag) @@ -761,7 +754,8 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat case pcie_deassert_reset: eeh_ops->reset(pe, EEH_RESET_DEACTIVATE); eeh_unfreeze_pe(pe, false); - eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED); + if (!(pe->type & EEH_PE_VF)) + eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED); eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev); eeh_pe_state_clear(pe, EEH_PE_ISOLATED); break; @@ -769,14 +763,16 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat eeh_pe_state_mark_with_cfg(pe, EEH_PE_ISOLATED); eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE); eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev); - eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); + if (!(pe->type & EEH_PE_VF)) + eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); eeh_ops->reset(pe, EEH_RESET_HOT); break; case pcie_warm_reset: eeh_pe_state_mark_with_cfg(pe, EEH_PE_ISOLATED); eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE); eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev); - eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); + if (!(pe->type & EEH_PE_VF)) + eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL); break; default: @@ -1243,6 +1239,14 @@ void eeh_remove_device(struct pci_dev *dev) * from the parent PE during the BAR resotre. */ edev->pdev = NULL; + + /* + * The flag "in_error" is used to trace EEH devices for VFs + * in error state or not. It's set in eeh_report_error(). If + * it's not set, eeh_report_{reset,resume}() won't be called + * for the VF EEH device. + */ + edev->in_error = false; dev->dev.archdata.edev = NULL; if (!(edev->pe->state & EEH_PE_KEEP)) eeh_rmv_from_parent_pe(edev); @@ -1537,6 +1541,17 @@ int eeh_pe_get_state(struct eeh_pe *pe) if (!eeh_ops || !eeh_ops->get_state) return -ENOENT; + /* + * If the parent PE is owned by the host kernel and is undergoing + * error recovery, we should return the PE state as temporarily + * unavailable so that the error recovery on the guest is suspended + * until the recovery completes on the host. + */ + if (pe->parent && + !(pe->state & EEH_PE_REMOVED) && + (pe->parent->state & (EEH_PE_ISOLATED | EEH_PE_RECOVERING))) + return EEH_PE_STATE_UNAVAIL; + result = eeh_ops->get_state(pe, NULL); rst_active = !!(result & EEH_STATE_RESET_ACTIVE); dma_en = !!(result & EEH_STATE_DMA_ENABLED); diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c index a1e86e172e3c..ddbcfab7efdf 100644 --- a/arch/powerpc/kernel/eeh_cache.c +++ b/arch/powerpc/kernel/eeh_cache.c @@ -195,8 +195,11 @@ static void __eeh_addr_cache_insert_dev(struct pci_dev *dev) return; } - /* Walk resources on this device, poke them into the tree */ - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + /* + * Walk resources on this device, poke the first 7 (6 normal BAR and 1 + * ROM BAR) into the tree. + */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { resource_size_t start = pci_resource_start(dev,i); resource_size_t end = pci_resource_end(dev,i); unsigned long flags = pci_resource_flags(dev,i); @@ -222,10 +225,6 @@ void eeh_addr_cache_insert_dev(struct pci_dev *dev) { unsigned long flags; - /* Ignore PCI bridges */ - if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) - return; - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); __eeh_addr_cache_insert_dev(dev); spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c index aabba94ff9cb..7815095fe3d8 100644 --- a/arch/powerpc/kernel/eeh_dev.c +++ b/arch/powerpc/kernel/eeh_dev.c @@ -67,6 +67,7 @@ void *eeh_dev_init(struct pci_dn *pdn, void *data) edev->pdn = pdn; edev->phb = phb; INIT_LIST_HEAD(&edev->list); + INIT_LIST_HEAD(&edev->rmv_list); return NULL; } diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 650cfb31ea3d..fb6207d2c604 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -34,6 +34,11 @@ #include <asm/prom.h> #include <asm/rtas.h> +struct eeh_rmv_data { + struct list_head edev_list; + int removed; +}; + /** * eeh_pcid_name - Retrieve name of PCI device driver * @pdev: PCI device @@ -190,7 +195,7 @@ static void *eeh_report_error(void *data, void *userdata) enum pci_ers_result rc, *res = userdata; struct pci_driver *driver; - if (!dev || eeh_dev_removed(edev)) + if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe)) return NULL; dev->error_state = pci_channel_io_frozen; @@ -211,6 +216,7 @@ static void *eeh_report_error(void *data, void *userdata) if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; if (*res == PCI_ERS_RESULT_NONE) *res = rc; + edev->in_error = true; eeh_pcid_put(dev); return NULL; } @@ -231,7 +237,7 @@ static void *eeh_report_mmio_enabled(void *data, void *userdata) enum pci_ers_result rc, *res = userdata; struct pci_driver *driver; - if (!dev || eeh_dev_removed(edev)) + if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe)) return NULL; driver = eeh_pcid_get(dev); @@ -271,7 +277,7 @@ static void *eeh_report_reset(void *data, void *userdata) enum pci_ers_result rc, *res = userdata; struct pci_driver *driver; - if (!dev || eeh_dev_removed(edev)) + if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe)) return NULL; dev->error_state = pci_channel_io_normal; @@ -282,7 +288,8 @@ static void *eeh_report_reset(void *data, void *userdata) if (!driver->err_handler || !driver->err_handler->slot_reset || - (edev->mode & EEH_DEV_NO_HANDLER)) { + (edev->mode & EEH_DEV_NO_HANDLER) || + (!edev->in_error)) { eeh_pcid_put(dev); return NULL; } @@ -326,20 +333,23 @@ static void *eeh_report_resume(void *data, void *userdata) { struct eeh_dev *edev = (struct eeh_dev *)data; struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + bool was_in_error; struct pci_driver *driver; - if (!dev || eeh_dev_removed(edev)) + if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe)) return NULL; dev->error_state = pci_channel_io_normal; driver = eeh_pcid_get(dev); if (!driver) return NULL; + was_in_error = edev->in_error; + edev->in_error = false; eeh_enable_irq(dev); if (!driver->err_handler || !driver->err_handler->resume || - (edev->mode & EEH_DEV_NO_HANDLER)) { + (edev->mode & EEH_DEV_NO_HANDLER) || !was_in_error) { edev->mode &= ~EEH_DEV_NO_HANDLER; eeh_pcid_put(dev); return NULL; @@ -365,7 +375,7 @@ static void *eeh_report_failure(void *data, void *userdata) struct pci_dev *dev = eeh_dev_to_pci_dev(edev); struct pci_driver *driver; - if (!dev || eeh_dev_removed(edev)) + if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe)) return NULL; dev->error_state = pci_channel_io_perm_failure; @@ -386,12 +396,40 @@ static void *eeh_report_failure(void *data, void *userdata) return NULL; } +static void *eeh_add_virt_device(void *data, void *userdata) +{ + struct pci_driver *driver; + struct eeh_dev *edev = (struct eeh_dev *)data; + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + struct pci_dn *pdn = eeh_dev_to_pdn(edev); + + if (!(edev->physfn)) { + pr_warn("%s: EEH dev %04x:%02x:%02x.%01x not for VF\n", + __func__, edev->phb->global_number, pdn->busno, + PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn)); + return NULL; + } + + driver = eeh_pcid_get(dev); + if (driver) { + eeh_pcid_put(dev); + if (driver->err_handler) + return NULL; + } + +#ifdef CONFIG_PPC_POWERNV + pci_iov_add_virtfn(edev->physfn, pdn->vf_index, 0); +#endif + return NULL; +} + static void *eeh_rmv_device(void *data, void *userdata) { struct pci_driver *driver; struct eeh_dev *edev = (struct eeh_dev *)data; struct pci_dev *dev = eeh_dev_to_pci_dev(edev); - int *removed = (int *)userdata; + struct eeh_rmv_data *rmv_data = (struct eeh_rmv_data *)userdata; + int *removed = rmv_data ? &rmv_data->removed : NULL; /* * Actually, we should remove the PCI bridges as well. @@ -416,7 +454,11 @@ static void *eeh_rmv_device(void *data, void *userdata) driver = eeh_pcid_get(dev); if (driver) { eeh_pcid_put(dev); - if (driver->err_handler && + if (removed && + eeh_pe_passed(edev->pe)) + return NULL; + if (removed && + driver->err_handler && driver->err_handler->error_detected && driver->err_handler->slot_reset) return NULL; @@ -427,11 +469,29 @@ static void *eeh_rmv_device(void *data, void *userdata) pci_name(dev)); edev->bus = dev->bus; edev->mode |= EEH_DEV_DISCONNECTED; - (*removed)++; + if (removed) + (*removed)++; - pci_lock_rescan_remove(); - pci_stop_and_remove_bus_device(dev); - pci_unlock_rescan_remove(); + if (edev->physfn) { +#ifdef CONFIG_PPC_POWERNV + struct pci_dn *pdn = eeh_dev_to_pdn(edev); + + pci_iov_remove_virtfn(edev->physfn, pdn->vf_index, 0); + edev->pdev = NULL; + + /* + * We have to set the VF PE number to invalid one, which is + * required to plug the VF successfully. + */ + pdn->pe_number = IODA_INVALID_PE; +#endif + if (rmv_data) + list_add(&edev->rmv_list, &rmv_data->edev_list); + } else { + pci_lock_rescan_remove(); + pci_stop_and_remove_bus_device(dev); + pci_unlock_rescan_remove(); + } return NULL; } @@ -545,11 +605,13 @@ int eeh_pe_reset_and_recover(struct eeh_pe *pe) * During the reset, udev might be invoked because those affected * PCI devices will be removed and then added. */ -static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) +static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus, + struct eeh_rmv_data *rmv_data) { struct pci_bus *frozen_bus = eeh_pe_bus_get(pe); struct timeval tstamp; - int cnt, rc, removed = 0; + int cnt, rc; + struct eeh_dev *edev; /* pcibios will clear the counter; save the value */ cnt = pe->freeze_count; @@ -563,12 +625,16 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) */ eeh_pe_state_mark(pe, EEH_PE_KEEP); if (bus) { - eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); - pci_lock_rescan_remove(); - pcibios_remove_pci_devices(bus); - pci_unlock_rescan_remove(); + if (pe->type & EEH_PE_VF) { + eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL); + } else { + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); + pci_lock_rescan_remove(); + pcibios_remove_pci_devices(bus); + pci_unlock_rescan_remove(); + } } else if (frozen_bus) { - eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed); + eeh_pe_dev_traverse(pe, eeh_rmv_device, &rmv_data); } /* @@ -610,14 +676,22 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) * PE. We should disconnect it so the binding can be * rebuilt when adding PCI devices. */ + edev = list_first_entry(&pe->edevs, struct eeh_dev, list); eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL); - pcibios_add_pci_devices(bus); - } else if (frozen_bus && removed) { + if (pe->type & EEH_PE_VF) + eeh_add_virt_device(edev, NULL); + else + pcibios_add_pci_devices(bus); + } else if (frozen_bus && rmv_data->removed) { pr_info("EEH: Sleep 5s ahead of partial hotplug\n"); ssleep(5); + edev = list_first_entry(&pe->edevs, struct eeh_dev, list); eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL); - pcibios_add_pci_devices(frozen_bus); + if (pe->type & EEH_PE_VF) + eeh_add_virt_device(edev, NULL); + else + pcibios_add_pci_devices(frozen_bus); } eeh_pe_state_clear(pe, EEH_PE_KEEP); @@ -636,8 +710,10 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) static void eeh_handle_normal_event(struct eeh_pe *pe) { struct pci_bus *frozen_bus; + struct eeh_dev *edev, *tmp; int rc = 0; enum pci_ers_result result = PCI_ERS_RESULT_NONE; + struct eeh_rmv_data rmv_data = {LIST_HEAD_INIT(rmv_data.edev_list), 0}; frozen_bus = eeh_pe_bus_get(pe); if (!frozen_bus) { @@ -692,7 +768,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) */ if (result == PCI_ERS_RESULT_NONE) { pr_info("EEH: Reset with hotplug activity\n"); - rc = eeh_reset_device(pe, frozen_bus); + rc = eeh_reset_device(pe, frozen_bus, NULL); if (rc) { pr_warn("%s: Unable to reset, err=%d\n", __func__, rc); @@ -744,7 +820,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) /* If any device called out for a reset, then reset the slot */ if (result == PCI_ERS_RESULT_NEED_RESET) { pr_info("EEH: Reset without hotplug activity\n"); - rc = eeh_reset_device(pe, NULL); + rc = eeh_reset_device(pe, NULL, &rmv_data); if (rc) { pr_warn("%s: Cannot reset, err=%d\n", __func__, rc); @@ -764,6 +840,15 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) goto hard_fail; } + /* + * For those hot removed VFs, we should add back them after PF get + * recovered properly. + */ + list_for_each_entry_safe(edev, tmp, &rmv_data.edev_list, rmv_list) { + eeh_add_virt_device(edev, NULL); + list_del(&edev->rmv_list); + } + /* Tell all device drivers that they can resume operations */ pr_info("EEH: Notify device driver to resume\n"); eeh_pe_dev_traverse(pe, eeh_report_resume, NULL); @@ -803,12 +888,17 @@ perm_error: * the their PCI config any more. */ if (frozen_bus) { - eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); - eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); + if (pe->type & EEH_PE_VF) { + eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL); + eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); + } else { + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); + eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); - pci_lock_rescan_remove(); - pcibios_remove_pci_devices(frozen_bus); - pci_unlock_rescan_remove(); + pci_lock_rescan_remove(); + pcibios_remove_pci_devices(frozen_bus); + pci_unlock_rescan_remove(); + } }</ |