diff options
Diffstat (limited to 'arch/powerpc/platforms')
-rw-r--r-- | arch/powerpc/platforms/40x/virtex.c | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/44x/Kconfig | 13 | ||||
-rw-r--r-- | arch/powerpc/platforms/44x/Makefile | 1 | ||||
-rw-r--r-- | arch/powerpc/platforms/44x/virtex.c | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/44x/virtex_ml510.c | 29 | ||||
-rw-r--r-- | arch/powerpc/platforms/Kconfig | 4 | ||||
-rw-r--r-- | arch/powerpc/platforms/Kconfig.cputype | 22 | ||||
-rw-r--r-- | arch/powerpc/platforms/cell/spufs/inode.c | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/pseries/iommu.c | 4 |
9 files changed, 63 insertions, 16 deletions
diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c index fc7fb001276c..d0fc6866b00c 100644 --- a/arch/powerpc/platforms/40x/virtex.c +++ b/arch/powerpc/platforms/40x/virtex.c @@ -14,6 +14,7 @@ #include <asm/prom.h> #include <asm/time.h> #include <asm/xilinx_intc.h> +#include <asm/xilinx_pci.h> #include <asm/ppc4xx.h> static struct of_device_id xilinx_of_bus_ids[] __initdata = { @@ -47,6 +48,7 @@ static int __init virtex_probe(void) define_machine(virtex) { .name = "Xilinx Virtex", .probe = virtex_probe, + .setup_arch = xilinx_pci_init, .init_IRQ = xilinx_intc_init_tree, .get_irq = xilinx_intc_get_irq, .restart = ppc4xx_reset_system, diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 0d83a6a0397d..90e3192611a4 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -156,7 +156,7 @@ config YOSEMITE # This option enables support for the IBM PPC440GX evaluation board. config XILINX_VIRTEX440_GENERIC_BOARD - bool "Generic Xilinx Virtex 440 board" + bool "Generic Xilinx Virtex 5 FXT board support" depends on 44x default n select XILINX_VIRTEX_5_FXT @@ -171,6 +171,17 @@ config XILINX_VIRTEX440_GENERIC_BOARD Most Virtex 5 designs should use this unless it needs to do some special configuration at board probe time. +config XILINX_ML510 + bool "Xilinx ML510 extra support" + depends on XILINX_VIRTEX440_GENERIC_BOARD + select PPC_PCI_CHOICE + select XILINX_PCI if PCI + select PPC_INDIRECT_PCI if PCI + select PPC_I8259 if PCI + help + This option enables extra support for features on the Xilinx ML510 + board. The ML510 has a PCI bus with ALI south bridge. + config PPC44x_SIMPLE bool "Simple PowerPC 44x board support" depends on 44x diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 01f51daace13..ee6185aeaa3b 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_SAM440EP) += sam440ep.o obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o +obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o diff --git a/arch/powerpc/platforms/44x/virtex.c b/arch/powerpc/platforms/44x/virtex.c index 68637faf70ae..cf96ccaa760c 100644 --- a/arch/powerpc/platforms/44x/virtex.c +++ b/arch/powerpc/platforms/44x/virtex.c @@ -16,6 +16,7 @@ #include <asm/prom.h> #include <asm/time.h> #include <asm/xilinx_intc.h> +#include <asm/xilinx_pci.h> #include <asm/reg.h> #include <asm/ppc4xx.h> #include "44x.h" @@ -53,6 +54,7 @@ static int __init virtex_probe(void) define_machine(virtex) { .name = "Xilinx Virtex440", .probe = virtex_probe, + .setup_arch = xilinx_pci_init, .init_IRQ = xilinx_intc_init_tree, .get_irq = xilinx_intc_get_irq, .calibrate_decr = generic_calibrate_decr, diff --git a/arch/powerpc/platforms/44x/virtex_ml510.c b/arch/powerpc/platforms/44x/virtex_ml510.c new file mode 100644 index 000000000000..ba4a6e388a46 --- /dev/null +++ b/arch/powerpc/platforms/44x/virtex_ml510.c @@ -0,0 +1,29 @@ +#include <asm/i8259.h> +#include <linux/pci.h> +#include "44x.h" + +/** + * ml510_ail_quirk + */ +static void __devinit ml510_ali_quirk(struct pci_dev *dev) +{ + /* Enable the IDE controller */ + pci_write_config_byte(dev, 0x58, 0x4c); + /* Assign irq 14 to the primary ide channel */ + pci_write_config_byte(dev, 0x44, 0x0d); + /* Assign irq 15 to the secondary ide channel */ + pci_write_config_byte(dev, 0x75, 0x0f); + /* Set the ide controller in native mode */ + pci_write_config_byte(dev, 0x09, 0xff); + + /* INTB = disabled, INTA = disabled */ + pci_write_config_byte(dev, 0x48, 0x00); + /* INTD = disabled, INTC = disabled */ + pci_write_config_byte(dev, 0x4a, 0x00); + /* Audio = INT7, Modem = disabled. */ + pci_write_config_byte(dev, 0x4b, 0x60); + /* USB = INT7 */ + pci_write_config_byte(dev, 0x74, 0x06); +} +DECLARE_PCI_FIXUP_EARLY(0x10b9, 0x1533, ml510_ali_quirk); + diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index e3e87078d03f..04a8061045c4 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -329,4 +329,8 @@ config MCU_MPC8349EMITX also register MCU GPIOs with the generic GPIO API, so you'll able to use MCU pins as GPIOs. +config XILINX_PCI + bool "Xilinx PCI host bridge support" + depends on PCI && XILINX_VIRTEX + endmenu diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 915a7ac6a91a..25f8a9c2ba1a 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -9,7 +9,6 @@ menu "Processor support" choice prompt "Processor Type" depends on PPC32 - default 6xx help There are five families of 32 bit PowerPC chips supported. The most common ones are the desktop and server CPUs (601, 603, @@ -21,7 +20,7 @@ choice If unsure, select 52xx/6xx/7xx/74xx/82xx/83xx/86xx. -config 6xx +config PPC_BOOK3S bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx" select PPC_FPU @@ -57,13 +56,11 @@ config E200 endchoice -# Until we have a choice of exclusive CPU types on 64-bit, we always -# use PPC_BOOK3S. On 32-bit, this is equivalent to 6xx which is -# "classic" MMU - config PPC_BOOK3S - def_bool y - depends on PPC64 || 6xx + default y + depends on PPC64 + select PPC_FPU + config POWER4_ONLY bool "Optimize for POWER4" @@ -74,6 +71,10 @@ config POWER4_ONLY The resulting binary will not work on POWER3 or RS64 processors when compiled with binutils 2.15 or later. +config 6xx + def_bool y + depends on PPC32 && PPC_BOOK3S + config POWER3 bool depends on PPC64 && PPC_BOOK3S @@ -202,9 +203,8 @@ config SPE If in doubt, say Y here. config PPC_STD_MMU - bool - depends on 6xx || PPC64 - default y + def_bool y + depends on PPC_BOOK3S config PPC_STD_MMU_32 def_bool y diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 36b67006d6ba..24b30b6909c4 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -644,8 +644,6 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode, fsnotify_mkdir(nd->path.dentry->d_inode, dentry); return ret; -out_dput: - dput(dentry); out_dir: mutex_unlock(&nd->path.dentry->d_inode->i_mutex); out: diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 3ee01b4f4257..661c8e02bcba 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -388,7 +388,7 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) while (pci->phb->dma_window_size * children > 0x80000000ul) pci->phb->dma_window_size >>= 1; - pr_debug("No ISA/IDE, window size is 0x%lx\n", + pr_debug("No ISA/IDE, window size is 0x%llx\n", pci->phb->dma_window_size); pci->phb->dma_window_base_cur = 0; @@ -414,7 +414,7 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) while (pci->phb->dma_window_size * children > 0x70000000ul) pci->phb->dma_window_size >>= 1; - pr_debug("ISA/IDE, window size is 0x%lx\n", pci->phb->dma_window_size); + pr_debug("ISA/IDE, window size is 0x%llx\n", pci->phb->dma_window_size); } |