diff options
Diffstat (limited to 'arch/powerpc/platforms/83xx')
-rw-r--r-- | arch/powerpc/platforms/83xx/Kconfig | 7 | ||||
-rw-r--r-- | arch/powerpc/platforms/83xx/Makefile | 1 | ||||
-rw-r--r-- | arch/powerpc/platforms/83xx/kmeter1.c | 191 | ||||
-rw-r--r-- | arch/powerpc/platforms/83xx/mpc83xx.h | 4 | ||||
-rw-r--r-- | arch/powerpc/platforms/83xx/usb.c | 10 |
5 files changed, 206 insertions, 7 deletions
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 437d29a59d72..083ebee9a16d 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -96,6 +96,13 @@ config ASP834x This enables support for the Analogue & Micro ASP 83xx board. +config KMETER1 + bool "Keymile KMETER1" + select DEFAULT_UIMAGE + select QUICC_ENGINE + help + This enables support for the Keymile KMETER1 board. + endif diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 051777c542c7..e139c36572ec 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_MPC837x_MDS) += mpc837x_mds.o obj-$(CONFIG_SBC834x) += sbc834x.o obj-$(CONFIG_MPC837x_RDB) += mpc837x_rdb.o obj-$(CONFIG_ASP834x) += asp834x.o +obj-$(CONFIG_KMETER1) += kmeter1.o diff --git a/arch/powerpc/platforms/83xx/kmeter1.c b/arch/powerpc/platforms/83xx/kmeter1.c new file mode 100644 index 000000000000..903acfd851ac --- /dev/null +++ b/arch/powerpc/platforms/83xx/kmeter1.c @@ -0,0 +1,191 @@ +/* + * Copyright 2008 DENX Software Engineering GmbH + * Author: Heiko Schocher <hs@denx.de> + * + * Description: + * Keymile KMETER1 board specific routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/of_platform.h> +#include <linux/of_device.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> + +#include "mpc83xx.h" + +#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */ +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init kmeter1_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("kmeter1_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") + mpc83xx_add_bridge(np); +#endif + +#ifdef CONFIG_QUICC_ENGINE + qe_reset(); + + np = of_find_node_by_name(NULL, "par_io"); + if (np != NULL) { + par_io_init(np); + of_node_put(np); + + for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;) + par_io_of_config(np); + } + + np = of_find_compatible_node(NULL, "network", "ucc_geth"); + if (np != NULL) { + uint svid; + + /* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */ + svid = mfspr(SPRN_SVR); + if (SVR_REV(svid) == 0x0021) { + struct device_node *np_par; + struct resource res; + void __iomem *base; + int ret; + + np_par = of_find_node_by_name(NULL, "par_io"); + if (np_par == NULL) { + printk(KERN_WARNING "%s couldn;t find par_io node\n", + __func__); + return; + } + /* Map Parallel I/O ports registers */ + ret = of_address_to_resource(np_par, 0, &res); + if (ret) { + printk(KERN_WARNING "%s couldn;t map par_io registers\n", + __func__); + return; + } + base = ioremap(res.start, res.end - res.start + 1); + + /* + * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2) + * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1) + */ + setbits32((base + 0xa8), 0x0c003000); + + /* + * IMMR + 0x14AC[20:27] = 10101010 + * (data delay for both UCC's) + */ + clrsetbits_be32((base + 0xac), 0xff0, 0xaa0); + iounmap(base); + of_node_put(np_par); + } + of_node_put(np); + } +#endif /* CONFIG_QUICC_ENGINE */ +} + +static struct of_device_id kmeter_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + { .type = "qe", }, + { .compatible = "fsl,qe", }, + {}, +}; + +static int __init kmeter_declare_of_platform_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, kmeter_ids, NULL); + + return 0; +} +machine_device_initcall(kmeter1, kmeter_declare_of_platform_devices); + +static void __init kmeter1_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,pq2pro-pic"); + if (!np) { + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + } + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); + of_node_put(np); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (!np) { + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + } + qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic); + of_node_put(np); +#endif /* CONFIG_QUICC_ENGINE */ +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init kmeter1_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "keymile,KMETER1"); +} + +define_machine(kmeter1) { + .name = "KMETER1", + .probe = kmeter1_probe, + .setup_arch = kmeter1_setup_arch, + .init_IRQ = kmeter1_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 83cfe51526ec..d1dc5b0b4fbf 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -22,8 +22,8 @@ /* system i/o configuration register low */ #define MPC83XX_SICRL_OFFS 0x114 #define MPC834X_SICRL_USB_MASK 0x60000000 -#define MPC834X_SICRL_USB0 0x40000000 -#define MPC834X_SICRL_USB1 0x20000000 +#define MPC834X_SICRL_USB0 0x20000000 +#define MPC834X_SICRL_USB1 0x40000000 #define MPC831X_SICRL_USB_MASK 0x00000c00 #define MPC831X_SICRL_USB_ULPI 0x00000800 #define MPC8315_SICRL_USB_MASK 0x000000fc diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index 11e1fac17c7f..3ba4bb7d41bb 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -47,25 +47,25 @@ int mpc834x_usb_cfg(void) sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ prop = of_get_property(np, "phy_type", NULL); + port1_is_dr = 1; if (prop && (!strcmp(prop, "utmi") || !strcmp(prop, "utmi_wide"))) { sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; sicrh |= MPC834X_SICRH_USB_UTMI; - port1_is_dr = 1; + port0_is_dr = 1; } else if (prop && !strcmp(prop, "serial")) { dr_mode = of_get_property(np, "dr_mode", NULL); if (dr_mode && !strcmp(dr_mode, "otg")) { sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; - port1_is_dr = 1; + port0_is_dr = 1; } else { - sicrl |= MPC834X_SICRL_USB0; + sicrl |= MPC834X_SICRL_USB1; } } else if (prop && !strcmp(prop, "ulpi")) { - sicrl |= MPC834X_SICRL_USB0; + sicrl |= MPC834X_SICRL_USB1; } else { printk(KERN_WARNING "834x USB PHY type not supported\n"); } - port0_is_dr = 1; of_node_put(np); } np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph"); |