diff options
Diffstat (limited to 'arch/arm')
52 files changed, 179 insertions, 120 deletions
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index c8609d8d2c55..b689172632ef 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -226,7 +226,7 @@ #address-cells = <1>; #size-cells = <1>; - elm_id = <&elm>; + ti,elm-id = <&elm>; }; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index df63484ef9b3..e7d9ca1305fa 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -161,7 +161,7 @@ #address-cells = <1>; #size-cells = <1>; - elm_id = <&elm>; + ti,elm-id = <&elm>; /* MTD partition table */ partition@0 { diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 86f773165d5c..1263c9d4cba3 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -197,7 +197,7 @@ gpmc,wr-access-ns = <30>; gpmc,wr-data-mux-bus-ns = <0>; - elm_id = <&elm>; + ti,elm-id = <&elm>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 2e0556af6e5e..d3e6bd805006 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -390,12 +390,12 @@ port@0 { reg = <0>; - label = "lan1"; + label = "lan5"; }; port@1 { reg = <1>; - label = "lan2"; + label = "lan4"; }; port@2 { @@ -405,12 +405,12 @@ port@3 { reg = <3>; - label = "lan4"; + label = "lan2"; }; port@4 { reg = <4>; - label = "lan5"; + label = "lan1"; }; port@5 { diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index caf2707680c1..e9b47b2bbc33 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -2,6 +2,7 @@ / { memory { + device_type = "memory"; reg = <0 0x10000000>; }; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index b98252232d20..445624a1a1de 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -2,7 +2,6 @@ #include <dt-bindings/clock/bcm2835.h> #include <dt-bindings/clock/bcm2835-aux.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" /* This include file covers the common peripherals and configuration between * bcm2835 and bcm2836 implementations, leaving the CPU configuration to @@ -13,6 +12,8 @@ compatible = "brcm,bcm2835"; model = "BCM2835"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; chosen { bootargs = "earlyprintk console=ttyAMA0"; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index d9499310a301..f6d135245a4b 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -447,14 +447,11 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; - samsung,dw-mshc-hs400-timing = <0 2>; - samsung,read-strobe-delay = <90>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; bus-width = <8>; cap-mmc-highspeed; mmc-hs200-1_8v; - mmc-hs400-1_8v; vmmc-supply = <&ldo20_reg>; vqmmc-supply = <&ldo11_reg>; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index b620ac884cfd..b13b0b2db881 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -243,7 +243,7 @@ clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>, <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>, <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>, - <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>, + <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2", diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 96ea936eeeb0..240a2864d044 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -64,7 +64,7 @@ cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; no-1-8-v; keep-power-in-suspend; - enable-sdio-wakup; + wakeup-source; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 95ee268ed510..2f33c463cbce 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -131,7 +131,7 @@ ti,y-min = /bits/ 16 <0>; ti,y-max = /bits/ 16 <0>; ti,pressure-max = /bits/ 16 <0>; - ti,x-plat-ohms = /bits/ 16 <400>; + ti,x-plate-ohms = /bits/ 16 <400>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index ef84d8699a76..5bf62897014c 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -113,7 +113,7 @@ partition@e0000 { label = "u-boot environment"; - reg = <0xe0000 0x100000>; + reg = <0xe0000 0x20000>; }; partition@100000 { diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi index e4ecab112601..7175511a92da 100644 --- a/arch/arm/boot/dts/kirkwood-openrd.dtsi +++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi @@ -116,6 +116,10 @@ }; }; +&pciec { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 365f39ff58bb..0ff1c2de95bf 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -35,10 +35,15 @@ ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - linux,mtd-name = "micron,mt29f4g16abbda3w"; + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; @@ -54,10 +59,6 @@ gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; gpmc,device-width = <2>; - - gpmc,page-burst-access-ns = <5>; - gpmc,cycle2cycle-delay-ns = <50>; - #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 5e9a13c0eaf7..1c2c74655416 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -46,6 +46,7 @@ linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index de256fa8da48..3e946cac55f3 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -223,7 +223,9 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x20000000>; + ranges = <0 0 0x30000000 0x1000000>, /* CS0 */ + <4 0 0x2b000000 0x1000000>, /* CS4 */ + <5 0 0x2c000000 0x1000000>; /* CS5 */ nand@0,0 { compatible = "ti,omap2-nand"; diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi index 7df27926ead2..4f4c6efbd518 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi @@ -55,8 +55,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ - ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 9e24b6a1d07b..1b304e2f1bd2 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -27,8 +27,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ - ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi index 334109e14613..82e98ee3023a 100644 --- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -15,9 +15,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */ - <5 0 0x2c000000 0x1000000>; /* CS5 */ - smsc1: ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index d294e82447a2..8b063ab10c19 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -550,8 +550,9 @@ interrupt-names = "mmcirq"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0>; - clock-names = "mmc"; - clocks = <&clk_s_c0_flexgen CLK_MMC_0>; + clock-names = "mmc", "icn"; + clocks = <&clk_s_c0_flexgen CLK_MMC_0>, + <&clk_s_c0_flexgen CLK_RX_ICN_HVA>; bus-width = <8>; non-removable; }; @@ -565,8 +566,9 @@ interrupt-names = "mmcirq"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sd1>; - clock-names = "mmc"; - clocks = <&clk_s_c0_flexgen CLK_MMC_1>; + clock-names = "mmc", "icn"; + clocks = <&clk_s_c0_flexgen CLK_MMC_1>, + <&clk_s_c0_flexgen CLK_RX_ICN_HVA>; resets = <&softreset STIH407_MMC1_SOFTRESET>; bus-width = <4>; }; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 18ed1ad10d32..40318869c733 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -41,7 +41,8 @@ compatible = "st,st-ohci-300x"; reg = <0x9a03c00 0x100>; interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; - clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, + <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, <&softreset STIH407_USB2_PORT0_SOFTRESET>; reset-names = "power", "softreset"; @@ -57,7 +58,8 @@ interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; - clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, + <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, <&softreset STIH407_USB2_PORT0_SOFTRESET>; reset-names = "power", "softreset"; @@ -71,7 +73,8 @@ compatible = "st,st-ohci-300x"; reg = <0x9a83c00 0x100>; interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; - clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, + <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, <&softreset STIH407_USB2_PORT1_SOFTRESET>; reset-names = "power", "softreset"; @@ -87,7 +90,8 @@ interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; - clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, + <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, <&softreset STIH407_USB2_PORT1_SOFTRESET>; reset-names = "power", "softreset"; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index e012890e0cf2..a17ba0243db3 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -84,7 +84,7 @@ trips { cpu_alert0: cpu_alert0 { /* milliCelsius */ - temperature = <850000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 1dfc492cc004..1444fbd543e7 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -897,7 +897,7 @@ palmas: tps65913@58 { compatible = "ti,palmas"; reg = <0x58>; - interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 70cf40996c3f..966a7fc044af 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -802,7 +802,7 @@ palmas: pmic@58 { compatible = "ti,palmas"; reg = <0x58>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index 17dd14545862..a161fa1dfb61 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -63,7 +63,7 @@ palmas: pmic@58 { compatible = "ti,palmas"; reg = <0x58>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 6403e0de540e..e52b82449a79 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1382,7 +1382,7 @@ * Pin 41: BR_UART1_TXD * Pin 44: BR_UART1_RXD */ - serial@0,70006000 { + serial@70006000 { compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; status = "okay"; }; @@ -1394,7 +1394,7 @@ * Pin 71: UART2_CTS_L * Pin 74: UART2_RTS_L */ - serial@0,70006040 { + serial@70006040 { compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; status = "okay"; }; diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 0e97b4b871f9..6c7b06854fce 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -140,7 +140,7 @@ static struct locomo_dev_info locomo_devices[] = { static void locomo_handler(struct irq_desc *desc) { - struct locomo *lchip = irq_desc_get_chip_data(desc); + struct locomo *lchip = irq_desc_get_handler_data(desc); int req, i; /* Acknowledge the parent IRQ */ @@ -200,8 +200,7 @@ static void locomo_setup_irq(struct locomo *lchip) * Install handler for IRQ_LOCOMO_HW. */ irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING); - irq_set_chip_data(lchip->irq, lchip); - irq_set_chained_handler(lchip->irq, locomo_handler); + irq_set_chained_handler_and_data(lchip->irq, locomo_handler, lchip); /* Install handlers for IRQ_LOCOMO_* */ for ( ; irq <= lchip->irq_base + 3; irq++) { diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index fb0a0a4dfea4..2e076c492005 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -472,8 +472,8 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) * specifies that S0ReadyInt and S1ReadyInt should be '1'. */ sa1111_writel(0, irqbase + SA1111_INTPOL0); - sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) | - SA1111_IRQMASK_HI(IRQ_S1_READY_NINT), + sa1111_writel(BIT(IRQ_S0_READY_NINT & 31) | + BIT(IRQ_S1_READY_NINT & 31), irqbase + SA1111_INTPOL1); /* clear all IRQs */ @@ -754,7 +754,7 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq) if (sachip->irq != NO_IRQ) { ret = sa1111_setup_irq(sachip, pd->irq_base); if (ret) - goto err_unmap; + goto err_clk; } #ifdef CONFIG_ARCH_SA1100 @@ -799,6 +799,8 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq) return 0; + err_clk: + clk_disable(sachip->clk); err_unmap: iounmap(sachip->base); err_clk_unprep: @@ -869,9 +871,9 @@ struct sa1111_save_data { #ifdef CONFIG_PM -static int sa1111_suspend(struct platform_device *dev, pm_message_t state) +static int sa1111_suspend_noirq(struct device *dev) { - struct sa1111 *sachip = platform_get_drvdata(dev); + struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags; unsigned int val; @@ -934,9 +936,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state) * restored by their respective drivers, and must be called * via LDM after this function. */ -static int sa1111_resume(struct platform_device *dev) +static int sa1111_resume_noirq(struct device *dev) { - struct sa1111 *sachip = platform_get_drvdata(dev); + struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags, id; void __iomem *base; @@ -952,7 +954,7 @@ static int sa1111_resume(struct platform_device *dev) id = sa1111_readl(sachip->base + SA1111_SKID); if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { __sa1111_remove(sachip); - platform_set_drvdata(dev, NULL); + dev_set_drvdata(dev, NULL); kfree(save); return 0; } @@ -1003,8 +1005,8 @@ static int sa1111_resume(struct platform_device *dev) } #else -#define sa1111_suspend NULL -#define sa1111_resume NULL +#define sa1111_suspend_noirq NULL +#define sa1111_resume_noirq NULL #endif static int sa1111_probe(struct platform_device *pdev) @@ -1017,7 +1019,7 @@ static int sa1111_probe(struct platform_device *pdev) return -EINVAL; irq = platform_get_irq(pdev, 0); if (irq < 0) - return -ENXIO; + return irq; return __sa1111_probe(&pdev->dev, mem, irq); } @@ -1038,6 +1040,11 @@ static int sa1111_remove(struct platform_device *pdev) return 0; |