diff options
Diffstat (limited to 'arch/arm')
105 files changed, 201 insertions, 4021 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 32cbbd565902..314bdf1163f9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -650,6 +650,7 @@ config ARCH_SHMOBILE_LEGACY select ARCH_SHMOBILE select ARM_PATCH_PHYS_VIRT if MMU select CLKDEV_LOOKUP + select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP @@ -660,6 +661,7 @@ config ARCH_SHMOBILE_LEGACY select NO_IOPORT_MAP select PINCTRL select PM_GENERIC_DOMAINS if PM + select SH_CLK_CPG select SPARSE_IRQ help Support for Renesas ARM SoC platforms using a non-multiplatform diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index b8a5e8c68f06..e4bffbae515f 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -76,7 +76,6 @@ simple-audio-card,cpu { sound-dai = <&sai2>; - master-clkdir-out; frame-master; bitclock-master; }; diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 63bde0efc041..a3fb8662ff6c 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -22,7 +22,6 @@ CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MXC=y CONFIG_MXC_IRQ_PRIOR=y -CONFIG_ARCH_MX1ADS=y CONFIG_MACH_SCB9328=y CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y @@ -30,10 +29,6 @@ CONFIG_MACH_MX25_3DS=y CONFIG_MACH_EUKREA_CPUIMX25SD=y CONFIG_MACH_IMX25_DT=y CONFIG_MACH_MX27ADS=y -CONFIG_MACH_PCM038=y -CONFIG_MACH_CPUIMX27=y -CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y -CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_PCA100=y diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 6cc6f7aebdae..dd28e1fedbdc 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -28,6 +28,11 @@ config OLD_CLK_AT91 bool default AT91_PMC_UNIT && AT91_USE_OLD_CLK +config OLD_IRQ_AT91 + bool + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + config AT91_SAM9_ALT_RESET bool default !ARCH_AT91X40 @@ -45,18 +50,16 @@ config HAVE_AT91_SMD config SOC_AT91SAM9 bool select AT91_SAM9_TIME + select ATMEL_AIC_IRQ if !OLD_IRQ_AT91 select CPU_ARM926T select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ config SOC_SAMA5 bool select AT91_SAM9_TIME + select ATMEL_AIC5_IRQ select CPU_V7 select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select USE_OF menu "Atmel AT91 System-on-Chip" @@ -70,8 +73,7 @@ config ARCH_AT91X40 depends on !MMU select CPU_ARM7TDMI select ARCH_USES_GETTIMEOFFSET - select MULTI_IRQ_HANDLER - select SPARSE_IRQ + select OLD_IRQ_AT91 help Select this if you are using one of Atmel's AT91X40 SoC. @@ -108,11 +110,10 @@ endif if SOC_SAM_V4_V5 config SOC_AT91RM9200 bool "AT91RM9200" + select ATMEL_AIC_IRQ if !OLD_IRQ_AT91 select CPU_ARM920T select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select HAVE_AT91_USB_CLK config SOC_AT91SAM9260 diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 44ace320d2e1..d8e88219edb4 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -14,31 +14,37 @@ config ARCH_AT91RM9200 bool "AT91RM9200" select SOC_AT91RM9200 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" select SOC_AT91SAM9260 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9261 bool "AT91SAM9261 or AT91SAM9G10" select SOC_AT91SAM9261 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9263 bool "AT91SAM9263" select SOC_AT91SAM9263 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9RL bool "AT91SAM9RL" select SOC_AT91SAM9RL select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 config ARCH_AT91SAM9G45 bool "AT91SAM9G45" select SOC_AT91SAM9G45 select AT91_USE_OLD_CLK + select OLD_IRQ_AT91 endchoice @@ -132,12 +138,6 @@ config MACH_ECO920 bool "eco920" help Select this if you are using the eco920 board - -config MACH_RSI_EWS - bool "RSI Embedded Webserver" - depends on ARCH_AT91RM9200 - help - Select this if you are using RSIs EWS board. endif # ---------------------------------------------------------- @@ -212,12 +212,6 @@ config MACH_CPU9G20 Select this if you are using a Eukrea Electromatique's CPU9G20 Board <http://www.eukrea.com/> -config MACH_ACMENETUSFOXG20 - bool "Acme Systems srl FOX Board G20" - help - Select this if you are using Acme Systems - FOX Board G20 <http://www.acmesystems.it> - config MACH_PORTUXG20 bool "taskit PortuxG20" help diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 78e9cec282f4..40946f4e8921 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,11 +2,12 @@ # Makefile for the linux kernel. # -obj-y := irq.o gpio.o setup.o sysirq_mask.o +obj-y := gpio.o setup.o sysirq_mask.o obj-m := obj-n := obj- := +obj-$(CONFIG_OLD_IRQ_AT91) += irq.o obj-$(CONFIG_OLD_CLK_AT91) += clock.o obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o @@ -46,7 +47,6 @@ obj-$(CONFIG_MACH_ECBAT |