diff options
Diffstat (limited to 'arch/arm64')
60 files changed, 3923 insertions, 212 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 9ac16a482ff1..871f21783866 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -49,7 +49,7 @@ config ARM64 select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_BITREVERSE select HAVE_ARCH_JUMP_LABEL - select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP + select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP && !(ARM64_16K_PAGES && ARM64_VA_BITS_48) select HAVE_ARCH_KGDB select HAVE_ARCH_SECCOMP_FILTER select HAVE_ARCH_TRACEHOOK @@ -316,6 +316,27 @@ config ARM64_ERRATUM_832075 If unsure, say Y. +config ARM64_ERRATUM_834220 + bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault" + depends on KVM + default y + help + This option adds an alternative code sequence to work around ARM + erratum 834220 on Cortex-A57 parts up to r1p2. + + Affected Cortex-A57 parts might report a Stage 2 translation + fault as the result of a Stage 1 fault for load crossing a + page boundary when there is a permission or device memory + alignment fault at Stage 1 and a translation fault at Stage 2. + + The workaround is to verify that the Stage 1 translation + doesn't generate a fault before handling the Stage 2 fault. + Please note that this does not necessarily enable the workaround, + as it depends on the alternative framework, which will only patch + the kernel if an affected CPU is detected. + + If unsure, say Y. + config ARM64_ERRATUM_845719 bool "Cortex-A53: 845719: a load might read incorrect data" depends on COMPAT diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 4043c35962cc..8446f27b18df 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -67,6 +67,23 @@ config ARCH_SEATTLE help This enables support for AMD Seattle SOC Family +config ARCH_SHMOBILE + bool + +config ARCH_RENESAS + bool "Renesas SoC Platforms" + select ARCH_SHMOBILE + select PINCTRL + select PM_GENERIC_DOMAINS if PM + help + This enables support for the ARMv8 based Renesas SoCs. + +config ARCH_R8A7795 + bool "Renesas R-Car H3 SoC Platform" + depends on ARCH_RENESAS + help + This enables support for the Renesas R-Car H3 SoC. + config ARCH_STRATIX10 bool "Altera's Stratix 10 SoCFPGA Family" help diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index eb3c42d97175..76e7510835b2 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -10,7 +10,9 @@ dts-dirs += hisilicon dts-dirs += marvell dts-dirs += mediatek dts-dirs += qcom +dts-dirs += renesas dts-dirs += rockchip +dts-dirs += socionext dts-dirs += sprd dts-dirs += xilinx diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 93bc3d7d51c0..8826f834f54f 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -60,6 +60,28 @@ }; }; + idle-states { + entry-method = "arm,psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2500>; + }; + }; + A57_0: cpu@0 { compatible = "arm,cortex-a57","arm,armv8"; reg = <0x0 0x0>; @@ -67,6 +89,7 @@ enable-method = "psci"; next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A57_1: cpu@1 { @@ -76,6 +99,7 @@ enable-method = "psci"; next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_0: cpu@100 { @@ -85,6 +109,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_1: cpu@101 { @@ -94,6 +119,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_2: cpu@102 { @@ -103,6 +129,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_3: cpu@103 { @@ -112,6 +139,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A57_L2: l2-cache0 { diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index 53442b5ee4ff..dcfcf15a17f5 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -60,6 +60,28 @@ }; }; + idle-states { + entry-method = "arm,psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + local-timer-stop; + entry-latency-us = <300>; + exit-latency-us = <1200>; + min-residency-us = <2500>; + }; + }; + A57_0: cpu@0 { compatible = "arm,cortex-a57","arm,armv8"; reg = <0x0 0x0>; @@ -67,6 +89,7 @@ enable-method = "psci"; next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A57_1: cpu@1 { @@ -76,6 +99,7 @@ enable-method = "psci"; next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_0: cpu@100 { @@ -85,6 +109,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_1: cpu@101 { @@ -94,6 +119,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_2: cpu@102 { @@ -103,6 +129,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A53_3: cpu@103 { @@ -112,6 +139,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; }; A57_L2: l2-cache0 { diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts index 244baf879dc9..6bb3d4d9efa9 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts @@ -50,10 +50,28 @@ device_type = "memory"; reg = <0x000000000 0x80000000 0x00000000 0x40000000>; }; +}; + +&i2c0 { + status = "ok"; +}; + +&i2c1 { + status = "ok"; +}; + +&uart3 { + status = "ok"; +}; - soc: soc { - uart3: serial@66130000 { - status = "ok"; - }; +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + #address-cells = <1>; + #size-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index 3c92d92278e5..a510d3a8e647 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -31,6 +31,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/bcm-ns2.h> /memreserve/ 0x84b00000 0x00000008; @@ -44,36 +45,44 @@ #address-cells = <2>; #size-cells = <0>; - cpu@0 { + A57_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0 0>; enable-method = "spin-table"; cpu-release-addr = <0 0x84b00000>; + next-level-cache = <&CLUSTER0_L2>; }; - cpu@1 { + A57_1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0 1>; enable-method = "spin-table"; cpu-release-addr = <0 0x84b00000>; + next-level-cache = <&CLUSTER0_L2>; }; - cpu@2 { + A57_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0 2>; enable-method = "spin-table"; cpu-release-addr = <0 0x84b00000>; + next-level-cache = <&CLUSTER0_L2>; }; - cpu@3 { + A57_3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0 3>; enable-method = "spin-table"; cpu-release-addr = <0 0x84b00000>; + next-level-cache = <&CLUSTER0_L2>; + }; + + CLUSTER0_L2: l2-cache@000 { + compatible = "cache"; }; }; @@ -89,12 +98,154 @@ IRQ_TYPE_EDGE_RISING)>; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A57_0>, + <&A57_1>, + <&A57_2>, + <&A57_3>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + iprocmed: iprocmed { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>; + clock-div = <2>; + clock-mult = <1>; + }; + + iprocslow: iprocslow { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + smmu: mmu@64000000 { + compatible = "arm,mmu-500"; + reg = <0x64000000 0x40000>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + mmu-masters; + }; + + lcpll_ddr: lcpll_ddr@6501d058 { + #clock-cells = <1>; + compatible = "brcm,ns2-lcpll-ddr"; + reg = <0x6501d058 0x20>, + <0x6501c020 0x4>, + <0x6501d04c 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll_ddr", "pcie_sata_usb", + "ddr", "ddr_ch2_unused", + "ddr_ch3_unused", "ddr_ch4_unused", + "ddr_ch5_unused"; + }; + + lcpll_ports: lcpll_ports@6501d078 { + #clock-cells = <1>; + compatible = "brcm,ns2-lcpll-ports"; + reg = <0x6501d078 0x20>, + <0x6501c020 0x4>, + <0x6501d054 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll_ports", "wan", "rgmii", + "ports_ch2_unused", + "ports_ch3_unused", + "ports_ch4_unused", + "ports_ch5_unused"; + }; + + genpll_scr: genpll_scr@6501d098 { + #clock-cells = <1>; + compatible = "brcm,ns2-genpll-scr"; + reg = <0x6501d098 0x32>, + <0x6501c020 0x4>, + <0x6501d044 0x4>; + clocks = <&osc>; + clock-output-names = "genpll_scr", "scr", "fs", + "audio_ref", "scr_ch3_unused", + "scr_ch4_unused", "scr_ch5_unused"; + }; + + genpll_sw: genpll_sw@6501d0c4 { + #clock-cells = <1>; + compatible = "brcm,ns2-genpll-sw"; + reg = <0x6501d0c4 0x32>, + <0x6501c020 0x4>, + <0x6501d044 0x4>; + clocks = <&osc>; + clock-output-names = "genpll_sw", "rpe", "250", "nic", + "chimp", "port", "sdio"; + }; + + crmu: crmu@65024000 { + compatible = "syscon"; + reg = <0x65024000 0x100>; + }; + + reboot@65024000 { + compatible ="syscon-reboot"; + regmap = <&crmu>; + offset = <0x90>; + mask = <0xfffffffd>; + }; + gic: interrupt-controller@65210000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -105,14 +256,53 @@ <0x65260000 0x1000>; }; + i2c0: i2c@66080000 { + compatible = "brcm,iproc-i2c"; + reg = <0x66080000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@660b0000 { + compatible = "brcm,iproc-i2c"; + reg = <0x660b0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + status = "disabled"; + }; + uart3: serial@66130000 { compatible = "snps,dw-apb-uart"; reg = <0x66130000 0x100>; interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clock-frequency = <23961600>; + clocks = <&osc>; status = "disabled"; }; + + hwrng: hwrng@66220000 { + compatible = "brcm,iproc-rng200"; + reg = <0x66220000 0x28>; + }; + + nand: nand@66460000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x66460000 0x600>, + <0x67015408 0x600>, + <0x66460f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 5424cc450f72..d8767b00862e 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos7.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Samsung Exynos7 Espresso board based on EXYNOS7"; @@ -52,11 +53,288 @@ status = "okay"; }; +&hsi2c_4 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <200000>; + status = "okay"; + + s2mps15_pmic@66 { + compatible = "samsung,s2mps15-pmic"; + reg = <0x66>; + interrupts = <2 IRQ_TYPE_NONE>; + interrupt-parent = <&gpa0>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq>; + wakeup-source; + + s2mps15_osc: clocks { + compatible = "samsung,s2mps13-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps13_ap", "s2mps13_cp", + "s2mps13_bt"; + }; + + regulators { + ldo1_reg: LDO1 { |