summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/ste-snowball.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/ste-snowball.dts')
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts36
1 files changed, 18 insertions, 18 deletions
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 3e97a669f15e..206826a855c0 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -404,17 +404,17 @@
*/
eth_snowball_mode: eth_snowball {
snowball_mux {
- ste,function = "sm";
- ste,pins = "sm_b_1";
+ function = "sm";
+ groups = "sm_b_1";
};
/* LAN IRQ pin */
snowball_cfg1 {
- ste,pins = "GPIO140_B11";
+ pins = "GPIO140_B11";
ste,config = <&in_nopull>;
};
/* LAN reset pin */
snowball_cfg2 {
- ste,pins = "GPIO141_C12";
+ pins = "GPIO141_C12";
ste,config = <&gpio_out_hi>;
};
@@ -423,11 +423,11 @@
sdi0 {
sdi0_default_mode: sdi0_default {
snowball_mux {
- ste,function = "mc0";
- ste,pins = "mc0dat31dir_a_1";
+ function = "mc0";
+ groups = "mc0dat31dir_a_1";
};
snowball_cfg1 {
- ste,pins = "GPIO21_AB3"; /* DAT31DIR */
+ pins = "GPIO21_AB3"; /* DAT31DIR */
ste,config = <&out_hi>;
};
@@ -436,19 +436,19 @@
ssp0 {
ssp0_snowball_mode: ssp0_snowball_default {
snowball_mux {
- ste,function = "ssp0";
- ste,pins = "ssp0_a_1";
+ function = "ssp0";
+ groups = "ssp0_a_1";
};
snowball_cfg1 {
- ste,pins = "GPIO144_B13"; /* FRM */
+ pins = "GPIO144_B13"; /* FRM */
ste,config = <&gpio_out_hi>;
};
snowball_cfg2 {
- ste,pins = "GPIO145_C13"; /* RXD */
+ pins = "GPIO145_C13"; /* RXD */
ste,config = <&in_pd>;
};
snowball_cfg3 {
- ste,pins =
+ pins =
"GPIO146_D13", /* TXD */
"GPIO143_D12"; /* CLK */
ste,config = <&out_lo>;
@@ -459,7 +459,7 @@
gpio_led {
gpioled_snowball_mode: gpioled_default {
snowball_cfg1 {
- ste,pins = "GPIO142_C11";
+ pins = "GPIO142_C11";
ste,config = <&gpio_out_hi>;
};
@@ -469,7 +469,7 @@
accel_snowball_mode: accel_snowball {
/* Accelerometer lines */
snowball_cfg1 {
- ste,pins =
+ pins =
"GPIO163_C20", /* ACCEL_IRQ1 */
"GPIO164_B21"; /* ACCEL_IRQ2 */
ste,config = <&gpio_in_pu>;
@@ -479,7 +479,7 @@
magnetometer {
magneto_snowball_mode: magneto_snowball {
snowball_cfg1 {
- ste,pins = "GPIO165_C21"; /* MAG_DRDY */
+ pins = "GPIO165_C21"; /* MAG_DRDY */
ste,config = <&gpio_in_pu>;
};
};
@@ -491,7 +491,7 @@
* pull low to reset state
*/
snowball_cfg1 {
- ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
+ pins = "GPIO171_D23"; /* GBF_ENA_RESET */
ste,config = <&gpio_out_lo>;
};
};
@@ -503,13 +503,13 @@
* These are plain GPIO pins used by WLAN
*/
snowball_cfg1 {
- ste,pins =
+ pins =
"GPIO161_D21", /* WLAN_PMU_EN */
"GPIO215_AH13"; /* WLAN_ENA */
ste,config = <&gpio_out_lo>;
};
snowball_cfg2 {
- ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */
+ pins = "GPIO216_AG12"; /* WLAN_IRQ */
ste,config = <&gpio_in_pu>;
};
};