summaryrefslogtreecommitdiffstats
path: root/arch/arc/mm/cache.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arc/mm/cache.c')
-rw-r--r--arch/arc/mm/cache.c50
1 files changed, 42 insertions, 8 deletions
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index a867575a758b..7db283b46ebd 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -665,6 +665,7 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
static DEFINE_SPINLOCK(lock);
unsigned long flags;
unsigned int ctrl;
+ phys_addr_t end;
spin_lock_irqsave(&lock, flags);
@@ -694,8 +695,19 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
* END needs to be setup before START (latter triggers the operation)
* END can't be same as START, so add (l2_line_sz - 1) to sz
*/
- write_aux_reg(ARC_REG_SLC_RGN_END, (paddr + sz + l2_line_sz - 1));
- write_aux_reg(ARC_REG_SLC_RGN_START, paddr);
+ end = paddr + sz + l2_line_sz - 1;
+ if (is_pae40_enabled())
+ write_aux_reg(ARC_REG_SLC_RGN_END1, upper_32_bits(end));
+
+ write_aux_reg(ARC_REG_SLC_RGN_END, lower_32_bits(end));
+
+ if (is_pae40_enabled())
+ write_aux_reg(ARC_REG_SLC_RGN_START1, upper_32_bits(paddr));
+
+ write_aux_reg(ARC_REG_SLC_RGN_START, lower_32_bits(paddr));
+
+ /* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
+ read_aux_reg(ARC_REG_SLC_CTRL);
while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
@@ -1111,6 +1123,13 @@ noinline void __init arc_ioc_setup(void)
__dc_enable();
}
+/*
+ * Cache related boot time checks/setups only needed on master CPU:
+ * - Geometry checks (kernel build and hardware agree: e.g. L1_CACHE_BYTES)
+ * Assume SMP only, so all cores will have same cache config. A check on
+ * one core suffices for all
+ * - IOC setup / dma callbacks only need to be done once
+ */
void __init arc_cache_init_master(void)
{
unsigned int __maybe_unused cpu = smp_processor_id();
@@ -1190,12 +1209,27 @@ void __ref arc_cache_init(void)
printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
- /*
- * Only master CPU needs to execute rest of function:
- * - Assume SMP so all cores will have same cache config so
- * any geomtry checks will be same for all
- * - IOC setup / dma callbacks only need to be setup once
- */
if (!cpu)
arc_cache_init_master();
+
+ /*
+ * In PAE regime, TLB and cache maintenance ops take wider addresses
+ * And even if PAE is not enabled in kernel, the upper 32-bits still need
+ * to be zeroed to keep the ops sane.
+ * As an optimization for more common !PAE enabled case, zero them out
+ * once at init, rather than checking/setting to 0 for every runtime op
+ */
+ if (is_isa_arcv2() && pae40_exist_but_not_enab()) {
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE))
+ write_aux_reg(ARC_REG_IC_PTAG_HI, 0);
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE))
+ write_aux_reg(ARC_REG_DC_PTAG_HI, 0);
+
+ if (l2_line_sz) {
+ write_aux_reg(ARC_REG_SLC_RGN_END1, 0);
+ write_aux_reg(ARC_REG_SLC_RGN_START1, 0);
+ }
+ }
}