diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt | 10 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/nand-macronix.txt | 27 |
2 files changed, 32 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt index 82156dc8f304..05651a654c66 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt @@ -35,11 +35,11 @@ Required properties: (optional) NAND flash cache range (if at non-standard offset) - reg-names : a list of the names corresponding to the previous register ranges. Should contain "nand" and (optionally) - "flash-dma" and/or "nand-cache". -- interrupts : The NAND CTLRDY interrupt and (if Flash DMA is available) - FLASH_DMA_DONE -- interrupt-names : May be "nand_ctlrdy" or "flash_dma_done", if broken out as - individual interrupts. + "flash-dma" or "flash-edu" and/or "nand-cache". +- interrupts : The NAND CTLRDY interrupt, (if Flash DMA is available) + FLASH_DMA_DONE and if EDU is avaialble and used FLASH_EDU_DONE +- interrupt-names : May be "nand_ctlrdy" or "flash_dma_done" or "flash_edu_done", + if broken out as individual interrupts. May be "nand", if the SoC has the individual NAND interrupts multiplexed behind another custom piece of hardware diff --git a/Documentation/devicetree/bindings/mtd/nand-macronix.txt b/Documentation/devicetree/bindings/mtd/nand-macronix.txt new file mode 100644 index 000000000000..ffab28a2c4d1 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/nand-macronix.txt @@ -0,0 +1,27 @@ +Macronix NANDs Device Tree Bindings +----------------------------------- + +Macronix NANDs support randomizer operation for scrambling user data, +which can be enabled with a SET_FEATURE. The penalty when using the +randomizer are subpage accesses prohibited and more time period needed +for program operation, i.e., tPROG 300us to 340us (randomizer enabled). +Enabling the randomizer is a one time persistent and non reversible +operation. + +For more high-reliability concern, if subpage write is not available +with hardware ECC and not enabled at UBI level, then enabling the +randomizer is recommended by default by adding a new specific property +in children nodes. + +Required NAND chip properties in children mode: +- randomizer enable: should be "mxic,enable-randomizer-otp" + +Example: + + nand: nand-controller@unit-address { + + nand@0 { + reg = <0>; + mxic,enable-randomizer-otp; + }; + }; |