summaryrefslogtreecommitdiffstats
path: root/Documentation/networking/batman-adv.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/batman-adv.txt')
-rw-r--r--Documentation/networking/batman-adv.txt50
1 files changed, 2 insertions, 48 deletions
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
index c1d82047a4b1..897d1f4e1df1 100644
--- a/Documentation/networking/batman-adv.txt
+++ b/Documentation/networking/batman-adv.txt
@@ -69,8 +69,7 @@ folder:
# aggregated_ogms gw_bandwidth log_level
# ap_isolation gw_mode orig_interval
# bonding gw_sel_class routing_algo
-# bridge_loop_avoidance hop_penalty vis_mode
-# fragmentation
+# bridge_loop_avoidance hop_penalty fragmentation
There is a special folder for debugging information:
@@ -78,7 +77,7 @@ There is a special folder for debugging information:
# ls /sys/kernel/debug/batman_adv/bat0/
# bla_backbone_table log transtable_global
# bla_claim_table originators transtable_local
-# gateways socket vis_data
+# gateways socket
Some of the files contain all sort of status information regard-
ing the mesh network. For example, you can view the table of
@@ -127,51 +126,6 @@ ously assigned to interfaces now used by batman advanced, e.g.
# ifconfig eth0 0.0.0.0
-VISUALIZATION
--------------
-
-If you want topology visualization, at least one mesh node must
-be configured as VIS-server:
-
-# echo "server" > /sys/class/net/bat0/mesh/vis_mode
-
-Each node is either configured as "server" or as "client" (de-
-fault: "client"). Clients send their topology data to the server
-next to them, and server synchronize with other servers. If there
-is no server configured (default) within the mesh, no topology
-information will be transmitted. With these "synchronizing
-servers", there can be 1 or more vis servers sharing the same (or
-at least very similar) data.
-
-When configured as server, you can get a topology snapshot of
-your mesh:
-
-# cat /sys/kernel/debug/batman_adv/bat0/vis_data
-
-This raw output is intended to be easily parsable and convertable
-with other tools. Have a look at the batctl README if you want a
-vis output in dot or json format for instance and how those out-
-puts could then be visualised in an image.
-
-The raw format consists of comma separated values per entry where
-each entry is giving information about a certain source inter-
-face. Each entry can/has to have the following values:
--> "mac" - mac address of an originator's source interface
- (each line begins with it)
--> "TQ mac value" - src mac's link quality towards mac address
- of a neighbor originator's interface which
- is being used for routing
--> "TT mac" - TT announced by source mac
--> "PRIMARY" - this is a primary interface
--> "SEC mac" - secondary mac address of source
- (requires preceding PRIMARY)
-
-The TQ value has a range from 4 to 255 with 255 being the best.
-The TT entries are showing which hosts are connected to the mesh
-via bat0 or being bridged into the mesh network. The PRIMARY/SEC
-values are only applied on primary interfaces
-
-
LOGGING/DEBUGGING
-----------------