summaryrefslogtreecommitdiffstats
path: root/Documentation/fmc/fmc-fakedev.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/fmc/fmc-fakedev.txt')
-rw-r--r--Documentation/fmc/fmc-fakedev.txt36
1 files changed, 36 insertions, 0 deletions
diff --git a/Documentation/fmc/fmc-fakedev.txt b/Documentation/fmc/fmc-fakedev.txt
new file mode 100644
index 000000000000..e85b74a4ae30
--- /dev/null
+++ b/Documentation/fmc/fmc-fakedev.txt
@@ -0,0 +1,36 @@
+fmc-fakedev
+===========
+
+This package includes a software-only device, called fmc-fakedev, which
+is able to register up to 4 mezzanines (by default it registers one).
+Unlike the SPEC driver, which creates an FMC device for each PCI cards
+it manages, this module creates a single instance of its set of
+mezzanines.
+
+It is meant as the simplest possible example of how a driver should be
+written, and it includes a fake EEPROM image (built using the tools
+described in *note FMC Identification::),, which by default is
+replicated for each fake mezzanine.
+
+You can also use this device to verify the match algorithms, by asking
+it to test your own EEPROM image. You can provide the image by means of
+the eeprom= module parameter: the new EEPROM image is loaded, as usual,
+by means of the firmware loader. This example shows the defaults and a
+custom EEPROM image:
+
+ spusa.root# insmod fmc-fakedev.ko
+ [ 99.971247] fake-fmc-carrier: mezzanine 0
+ [ 99.975393] Manufacturer: fake-vendor
+ [ 99.979624] Product name: fake-design-for-testing
+ spusa.root# rmmod fmc-fakedev
+ spusa.root# insmod fmc-fakedev.ko eeprom=fdelay-eeprom.bin
+ [ 121.447464] fake-fmc-carrier: Mezzanine 0: eeprom "fdelay-eeprom.bin"
+ [ 121.462725] fake-fmc-carrier: mezzanine 0
+ [ 121.466858] Manufacturer: CERN
+ [ 121.470477] Product name: FmcDelay1ns4cha
+ spusa.root# rmmod fmc-fakedev
+
+After loading the device, you can use the write_ee method do modify its
+own internal fake EEPROM: whenever the image is overwritten starting at
+offset 0, the module will unregister and register again the FMC device.
+This is shown in fmc-write-eeprom.txt