diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
15 files changed, 786 insertions, 445 deletions
diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt b/Documentation/devicetree/bindings/regulator/mp886x.txt deleted file mode 100644 index 551867829459..000000000000 --- a/Documentation/devicetree/bindings/regulator/mp886x.txt +++ /dev/null @@ -1,27 +0,0 @@ -Monolithic Power Systems MP8867/MP8869 voltage regulator - -Required properties: -- compatible: Must be one of the following. - "mps,mp8867" - "mps,mp8869" -- reg: I2C slave address. -- enable-gpios: enable gpios. -- mps,fb-voltage-divider: An array of two integers containing the resistor - values R1 and R2 of the feedback voltage divider in kilo ohms. - -Any property defined as part of the core regulator binding, defined in -./regulator.txt, can also be used. - -Example: - - vcpu: regulator@62 { - compatible = "mps,mp8869"; - regulator-name = "vcpu"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <850000>; - regulator-always-on; - regulator-boot-on; - enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>; - mps,fb-voltage-divider = <80 240>; - reg = <0x62>; - }; diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml new file mode 100644 index 000000000000..ba175b30f468 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mps,mp886x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Monolithic Power Systems MP8867/MP8869 voltage regulator + +maintainers: + - Jisheng Zhang <jszhang@kernel.org> + +allOf: + - $ref: regulator.yaml# + +properties: + compatible: + enum: + - mps,mp8867 + - mps,mp8869 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO to enable/disable the regulator. + maxItems: 1 + + mps,fb-voltage-divider: + description: An array of two integers containing the resistor + values R1 and R2 of the feedback voltage divider in kilo ohms. + $ref: "/schemas/types.yaml#/definitions/uint32-array" + maxItems: 2 + + mps,switch-frequency-hz: + description: The valid switch frequency in Hertz. + enum: [500000, 750000, 1000000, 1250000, 1500000] + +required: + - compatible + - reg + - enable-gpios + - mps,fb-voltage-divider + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@62 { + compatible = "mps,mp8869"; + regulator-name = "vcpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>; + mps,fb-voltage-divider = <80 240>; + reg = <0x62>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml new file mode 100644 index 000000000000..a462d99a25cc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mt6360-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6360 Regulator from MediaTek Integrated + +maintainers: + - Gene Chen <gene_chen@richtek.com> + +description: | + list of regulators provided by this controller, must be named + after their hardware counterparts buck1/2 or ldo1/2/3/5/6/7 + +properties: + compatible: + const: mediatek,mt6360-regulator + + LDO_VIN1-supply: + description: Input supply phandle(s) for LDO1/2/3 + LDO_VIN2-supply: + description: Input supply phandle(s) for LDO5 + LDO_VIN3-supply: + description: Input supply phandle(s) for LDO6/7 + +patternProperties: + "^buck[12]$": + $ref: "regulator.yaml#" + + "^ldo[123567]$": + $ref: "regulator.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/mediatek,mt6360-regulator.h> + regulator { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&BUCK2>; + buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "mt6360,buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + }; + BUCK2: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "mt6360,buck2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + }; + ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "mt6360,ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "mt6360,ldo7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "mt6360,ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "mt6360,ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "mt6360,ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "mt6360,ldo5"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt deleted file mode 100644 index 4d3b12b92cb3..000000000000 --- a/Documentation/devicetree/bindings/regulator/pfuze100.txt +++ /dev/null @@ -1,394 +0,0 @@ -PFUZE100 family of regulators - -Required properties: -- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000", "fsl,pfuze3001" -- reg: I2C slave address - -Optional properties: -- fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch - regulators to save power consumption. Attention, ensure that all important - regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on" - property. If not present, the switched regulators are always on and can't be - disabled. This binding is a workaround to keep backward compatibility with - old dtb's which rely on the fact that the switched regulators are always on - and don't mark them explicit as "regulator-always-on". -- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all - power rails when PMIC_STBY_REQ line is asserted during the power off sequence. - Use this option if the SoC should be powered off by external power - management IC (PMIC) on PMIC_STBY_REQ signal. - As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal. - -Required child node: -- regulators: This is the list of child nodes that specify the regulator - initialization data for defined regulators. Please refer to below doc - Documentation/devicetree/bindings/regulator/regulator.txt. - - The valid names for regulators are: - --PFUZE100 - sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 - --PFUZE200 - sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin - --PFUZE3000 - sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4 - --PFUZE3001 - sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4 - -Each regulator is defined using the standard binding for regulators. - -Example 1: PFUZE100 - - pfuze100: pmic@8 { - compatible = "fsl,pfuze100"; - reg = <0x08>; - - regulators { - sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3b_reg: sw3b { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: sw4 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - - -Example 2: PFUZE200 - - pfuze200: pmic@8 { - compatible = "fsl,pfuze200"; - reg = <0x08>; - - regulators { - sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3b_reg: sw3b { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - coin_reg: coin { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - -Example 3: PFUZE3000 - - pfuze3000: pmic@8 { - compatible = "fsl,pfuze3000"; - reg = <0x08>; - - regulators { - sw1a_reg: sw1a { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1475000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - /* use sw1c_reg to align with pfuze100/pfuze200 */ - sw1c_reg: sw1b { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1475000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3a_reg: sw3 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - regulator-always-on; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen2_reg: vldo2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen3_reg: vccsd { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen4_reg: v33 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3300000>; - }; - - vgen5_reg: vldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vldo4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - -Example 4: PFUZE 3001 - - pfuze3001: pmic@8 { - compatible = "fsl,pfuze3001"; - reg = <0x08>; - - regulators { - sw1_reg: sw1 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: sw3 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - regulator-always-on; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen2_reg: vldo2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-always-on; - }; - - vgen3_reg: vccsd { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen4_reg: v33 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen5_reg: vldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vldo4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml new file mode 100644 index 000000000000..c6de49685db7 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/pfuze100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PFUZE100 family of regulators + +maintainers: + - Robin Gong <yibin.gong@nxp.com> + +description: | + The valid names for regulators are: + --PFUZE100 + sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 + --PFUZE200 + sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin + --PFUZE3000 + sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4 + --PFUZE3001 + sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4 + + Each regulator is defined using the standard binding for regulators. + +properties: + $nodename: + pattern: "^pmic@[0-9]$" + + compatible: + enum: + - fsl,pfuze100 + - fsl,pfuze200 + - fsl,pfuze3000 + - fsl,pfuze3001 + + reg: + maxItems: 1 + + fsl,pfuze-support-disable-sw: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Boolean, if present disable all unused switch regulators to save power + consumption. Attention, ensure that all important regulators + (e.g. DDR ref, DDR supply) has set the "regulator-always-on" property. + If not present, the switched regulators are always on and can't be + disabled. This binding is a workaround to keep backward compatibility + with old dtb's which rely on the fact that the switched regulators are + always on and don't mark them explicit as "regulator-always-on". + + fsl,pmic-stby-poweroff: + $ref: /schemas/types.yaml#/definitions/flag + description: | + if present, configure the PMIC to shutdown all + power rails when PMIC_STBY_REQ line is asserted during the power off sequence. + Use this option if the SoC should be powered off by external power management + IC (PMIC) on PMIC_STBY_REQ signal. + As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal. + + regulators: + type: object + description: | + list of regulators provided by this controller. + + patternProperties: + "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$": + $ref: "regulator.yaml#" + type: object + + "^vgen[1-6]$": + $ref: "regulator.yaml#" + type: object + + "^(vsnvs|vref|vrefddr|swbst|coin)$": + $ref: "regulator.yaml#" + type: object + + additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml index c0d7700afee7..a35c6cb9bf97 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml @@ -33,6 +33,10 @@ description: l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3, 5vs1, 5vs2 + For pm8950 and pm8953, s1, s2, s3, s4, s5, s6, s7, l1, l2, l3, l4, l5, l6, + l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, + l23 + For pm8994, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 @@ -41,6 +45,11 @@ description: l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2 + For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22, + l12, l13, l14, l15, l16, l17, l18, l19 + + For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob + For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 @@ -63,8 +72,11 @@ properties: - qcom,rpm-pm8916-regulators - qcom,rpm-pm8941-regulators - qcom,rpm-pm8950-regulators + - qcom,rpm-pm8953-regulators - qcom,rpm-pm8994-regulators - qcom,rpm-pm8998-regulators + - qcom,rpm-pm660-regulators + - qcom,rpm-pm660l-regulators - qcom,rpm-pma8084-regulators - qcom,rpm-pmi8994-regulators - qcom,rpm-pmi8998-regulators diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt index 8b005192f6e8..2b544059e029 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt @@ -12,6 +12,8 @@ Qualcomm SPMI Regulators "qcom,pm8950-regulators" "qcom,pm8994-regulators" "qcom,pmi8994-regulators" + "qcom,pm660-regulators" + "qcom,pm660l-regulators" "qcom,pms405-regulators" - interrupts: @@ -134,6 +136,35 @@ Qualcomm SPMI Regulators Definition: Reference to regulator supplying the input pin, as described in the data sheet. +- vdd_l1_l6_l7-supply: +- vdd_l2_l3-supply: +- vdd_l5-supply: +- vdd_l8_l9_l10_l11_l12_l13_l14-supply: +- vdd_l15_l16_l17_l18_l19-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s5-supply: +- vdd_s6-supply: + Usage: optional (pm660 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + +- vdd_l1_l9_l10-supply: +- vdd_l2-supply: +- vdd_l3_l5_l7_l8-supply: +- vdd_l4_l6-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: + Usage: optional (pm660l only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + - vdd_l1_l2-supply: - vdd_l3_l8-supply: - vdd_l4-supply: diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml new file mode 100644 index 000000000000..0ae25d119b6f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi 7" display ATTINY88-based regulator/backlight controller + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + The RaspberryPi 7" display has an ATTINY88-based regulator/backlight + controller on the PCB, which is used to turn the display unit on/off + and control the backlight. + +allOf: + - $ref: "regulator.yaml#" + +properties: + compatible: + const: raspberrypi,7inch-touchscreen-panel-regulator + + reg: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@45 { + compatible = "raspberrypi,7inch-touchscreen-panel-regulator"; + reg = <0x45>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml new file mode 100644 index 000000000000..235e593b3b2c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt4801-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4801 Display Bias regulators + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + Regulator nodes should be named to DSVP and DSVN. The + definition for each of these nodes is defined |