summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/sound/cs42l52.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/cs42l52.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/cs42l52.txt46
1 files changed, 46 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/cs42l52.txt b/Documentation/devicetree/bindings/sound/cs42l52.txt
new file mode 100644
index 000000000000..bc03c9312a19
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42l52.txt
@@ -0,0 +1,46 @@
+CS42L52 audio CODEC
+
+Required properties:
+
+ - compatible : "cirrus,cs42l52"
+
+ - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+ - cirrus,reset-gpio : GPIO controller's phandle and the number
+ of the GPIO used to reset the codec.
+
+ - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency.
+ Allowable values of 0x00 through 0x0F. These are raw values written to the
+ register, not the actual frequency. The frequency is determined by the following.
+ Frequency = (64xFs)/(N+2)
+ N = chgfreq_val
+ Fs = Sample Rate (variable)
+
+ - cirrus,mica-differential-cfg : boolean, If present, then the MICA input is configured
+ as a differential input. If not present then the MICA input is configured as
+ Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input.
+
+ - cirrus,micb-differential-cfg : boolean, If present, then the MICB input is configured
+ as a differential input. If not present then the MICB input is configured as
+ Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input.
+
+ - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin
+ 0 = 0.5 x VA
+ 1 = 0.6 x VA
+ 2 = 0.7 x VA
+ 3 = 0.8 x VA
+ 4 = 0.83 x VA
+ 5 = 0.91 x VA
+
+Example:
+
+codec: codec@4a {
+ compatible = "cirrus,cs42l52";
+ reg = <0x4a>;
+ reset-gpio = <&gpio 10 0>;
+ cirrus,chgfreq-divisor = <0x05>;
+ cirrus.mica-differential-cfg;
+ cirrus,micbias-lvl = <5>;
+};