diff options
Diffstat (limited to 'Documentation/devicetree/bindings/reset')
3 files changed, 68 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt index 98c9f560e5c5..38fe34fd8b8a 100644 --- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt +++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt @@ -1,7 +1,8 @@ Altera SOCFPGA Reset Manager Required properties: -- compatible : "altr,rst-mgr" +- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10) + "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC - reg : Should contain 1 register ranges(address and length) - altr,modrst-offset : Should contain the offset of the first modrst register. - #reset-cells: 1 diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index 101743dda223..ea005177d20a 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -120,27 +120,30 @@ Example: }; -USB3 core reset ---------------- +Peripheral core reset in glue layer +----------------------------------- -USB3 core reset belongs to USB3 glue layer. Before using the core reset, -it is necessary to control the clocks and resets to enable this layer. -These clocks and resets should be described in each property. +Some peripheral core reset belongs to its own glue layer. Before using +this core reset, it is necessary to control the clocks and resets to enable +this layer. These clocks and resets should be described in each property. Required properties: - compatible: Should be - "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC - "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC + "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3 + "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3 + "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3 + "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3 + "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI + "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI + "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI - #reset-cells: Should be 1. - reg: Specifies offset and length of the register set for the device. -- clocks: A list of phandles to the clock gate for USB3 glue layer. +- clocks: A list of phandles to the clock gate for the glue layer. According to the clock-names, appropriate clocks are required. - clock-names: Should contain "gio", "link" - for Pro4 SoC "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. +- resets: A list of phandles to the reset control for the glue layer. According to the reset-names, appropriate resets are required. - reset-names: Should contain "gio", "link" - for Pro4 SoC diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt new file mode 100644 index 000000000000..27a45fe5ecf1 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt @@ -0,0 +1,52 @@ +-------------------------------------------------------------------------- + = Zynq UltraScale+ MPSoC reset driver binding = +-------------------------------------------------------------------------- +The Zynq UltraScale+ MPSoC has several different resets. + +See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information +about zynqmp resets. + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required Properties: +- compatible: "xlnx,zynqmp-reset" +- #reset-cells: Specifies the number of cells needed to encode reset + line, should be 1 + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + zynqmp_reset: reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; + }; +}; + +Specifying reset lines connected to IP modules +============================================== + +Device nodes that need access to reset lines should +specify them as a reset phandle in their corresponding node as +specified in reset.txt. + +For list of all valid reset indicies see +<dt-bindings/reset/xlnx-zynqmp-resets.h> + +Example: + +serdes: zynqmp_phy@fd400000 { + ... + + resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; + reset-names = "sata_rst"; + + ... +}; |