summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt53
1 files changed, 51 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index c70fca146e91..36281e7a2a46 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -7,10 +7,15 @@ on-chip controllers onto these pads.
Required Properties:
- compatible: should be one of the following.
+ - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller,
+ - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller,
+ - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller,
+ - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller,
- "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
- "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
- "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
- "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
+ - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
- reg: Base address of the pin controller hardware module and length of
the address space it occupies.
@@ -21,8 +26,18 @@ Required Properties:
- gpio-controller: identifies the node as a gpio controller and pin bank.
- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
- binding is used, the amount of cells must be specified as 2. See generic
- GPIO binding documentation for description of particular cells.
+ binding is used, the amount of cells must be specified as 2. See the below
+ mentioned gpio binding representation for description of particular cells.
+
+ Eg: <&gpx2 6 0>
+ <[phandle of the gpio controller node]
+ [pin number within the gpio controller]
+ [flags]>
+
+ Values for gpio specifier:
+ - Pin number: is a value between 0 to 7.
+ - Flags: 0 - Active High
+ 1 - Active Low
- Pin mux/config groups as child nodes: The pin mux (selecting pin function
mode) and pin config (pull up/down, driver strength) settings are represented
@@ -106,6 +121,10 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
- compatible: identifies the type of the external wakeup interrupt controller
The possible values are:
+ - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
+ found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
+ - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
+ found on Samsung S3C2412 and S3C2413 SoCs,
- samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
found on Samsung S3C64xx SoCs,
- samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
@@ -266,3 +285,33 @@ Example 4: Set up the default pin state for uart controller.
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
}
+
+Example 5: A display port client node that supports 'default' pinctrl state
+ and gpio binding.
+
+ display-port-controller {
+ /* ... */
+
+ samsung,hpd-gpio = <&gpx2 6 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ };
+
+Example 6: Request the gpio for display port controller
+
+ static int exynos_dp_probe(struct platform_device *pdev)
+ {
+ int hpd_gpio, ret;
+ struct device *dev = &pdev->dev;
+ struct device_node *dp_node = dev->of_node;
+
+ /* ... */
+
+ hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0);
+
+ /* ... */
+
+ ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN,
+ "hpd_gpio");
+ /* ... */
+ }