diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
16 files changed, 67 insertions, 68 deletions
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index c7c9ad4e3f9f..7f2578d48e3f 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -38,7 +38,7 @@ properties: const: stmmaceth syscon: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the device containing the EMAC or GMAC clock register @@ -114,7 +114,7 @@ allOf: then: properties: allwinner,leds-active-low: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: EPHY LEDs are active low. @@ -126,7 +126,7 @@ allOf: const: allwinner,sun8i-h3-mdio-mux mdio-parent-bus: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to EMAC MDIO. diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index 6b057b117aa0..1f133f4a2924 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -60,7 +60,7 @@ allOf: - const: timing-adjustment amlogic,tx-delay-ns: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The internal RGMII TX clock delay (provided by this driver) in nanoseconds. Allowed values are 0ns, 2ns, 4ns, 6ns. diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 8e044631bcf7..8a3494db4d8d 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -54,7 +54,7 @@ patternProperties: description: Describes the label associated with this port, which will become the netdev name - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string link: description: @@ -62,13 +62,13 @@ patternProperties: port is used as the outgoing port towards the phandle ports. The full routing information must be given, not just the one hop routes to neighbouring switches - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array ethernet: description: Should be a phandle to a valid Ethernet device node. This host device is what the switch port is connected to - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle phy-handle: true diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index cc93063a8f39..0965f6515f9e 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -16,7 +16,7 @@ properties: local-mac-address: description: Specifies the MAC address that was assigned to the network device. - $ref: /schemas/types.yaml#definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint8-array items: - minItems: 6 maxItems: 6 @@ -27,20 +27,20 @@ properties: program; should be used in cases where the MAC address assigned to the device by the boot program is different from the local-mac-address property. - $ref: /schemas/types.yaml#definitions/uint8-array + $ref: /schemas/types.yaml#/definitions/uint8-array items: - minItems: 6 maxItems: 6 max-frame-size: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there\'s contradiction in the Devicetree Specification). max-speed: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Specifies maximum speed in Mbit/s supported by the device. @@ -101,7 +101,7 @@ properties: $ref: "#/properties/phy-connection-type" phy-handle: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a PHY device. @@ -114,7 +114,7 @@ properties: deprecated: true rx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The size of the controller\'s receive fifo in bytes. This is used for components that can have configurable receive fifo sizes, @@ -129,12 +129,12 @@ properties: If this property is present then the MAC applies the RX delay. sfp: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a SFP cage. tx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: The size of the controller\'s transmit fifo in bytes. This is used for components that can have configurable fifo sizes. @@ -150,7 +150,7 @@ properties: description: Specifies the PHY management type. If auto is set and fixed-link is not specified, it uses MDIO for management. - $ref: /schemas/types.yaml#definitions/string + $ref: /schemas/types.yaml#/definitions/string default: auto enum: - auto @@ -198,17 +198,17 @@ properties: speed: description: Link speed. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [10, 100, 1000] full-duplex: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that full-duplex is used. When absent, half duplex is assumed. asym-pause: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that asym_pause should be enabled. diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 6dd72faebd89..2766fe45bb98 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -78,57 +78,57 @@ properties: Maximum PHY supported speed in Mbits / seconds. broken-turn-around: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates the PHY device does not correctly release the turn around line low at end of the control phase of the MDIO transaction. enet-phy-lane-swap: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates the PHY will swap the TX/RX lanes to compensate for the board being designed with the lanes swapped. eee-broken-100tx: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-1000t: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-10gt: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-1000kx: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-10gkx4: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. eee-broken-10gkr: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. phy-is-integrated: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates that the PHY is integrated into the same physical package as the Ethernet MAC. If needed, muxers @@ -158,7 +158,7 @@ properties: this property is missing the delay will be skipped. sfp: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Specifies a reference to a node representing a SFP cage. diff --git a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml index 2159b7d1f537..7f620a71a972 100644 --- a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml +++ b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml @@ -31,7 +31,7 @@ properties: phy-mode: true pcs-handle: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: A reference to a node representing a PCS PHY device found on the internal MDIO bus. diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index e811e0fd851c..08e15fb1584f 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -70,7 +70,7 @@ patternProperties: The ID number for the device. broken-turn-around: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: If set, indicates the MDIO device does not correctly release the turn around line low at end of the control phase of the diff --git a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml index 0bbd598704e9..e6a5ff208253 100644 --- a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml @@ -42,7 +42,7 @@ properties: - const: trans mediatek,pericfg: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the device containing the PERICFG register range. This is used to control the MII mode. diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 4d8464b2676d..8a2d12644675 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -114,14 +114,13 @@ properties: validating firwmare used by the GSI. modem-remoteproc: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: This defines the phandle to the remoteproc node representing the modem subsystem. This is requied so the IPA driver can receive and act on notifications of modem up/down events. memory-region: - $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 description: If present, a phandle for a reserved memory area that holds diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 11a6fdb657c9..b2f6083f556a 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -126,7 +126,7 @@ properties: in a different mode than the PHY in order to function. snps,axi-config: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: AXI BUS Mode parameters. Phandle to a node that can contain the following properties @@ -141,7 +141,7 @@ properties: * snps,rb, rebuild INCRx Burst snps,mtl-rx-config: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Multiple RX Queues parameters. Phandle to a node that can contain the following properties @@ -164,7 +164,7 @@ properties: * snps,priority, RX queue priority (Range 0x0 to 0xF) snps,mtl-tx-config: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Multiple TX Queues parameters. Phandle to a node that can contain the following properties @@ -198,7 +198,7 @@ properties: snps,reset-active-low: deprecated: true - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Indicates that the PHY Reset is active low @@ -208,55 +208,55 @@ properties: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. - $ref: /schemas/types.yaml#definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 3 maxItems: 3 snps,aal: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Use Address-Aligned Beats snps,fixed-burst: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Program the DMA to use the fixed burst mode snps,mixed-burst: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Program the DMA to use the mixed burst mode snps,force_thresh_dma_mode: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Force DMA to use the threshold mode for both tx and rx snps,force_sf_dma_mode: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Force DMA to use the Store and Forward mode for both tx and rx. This flag is ignored if force_thresh_dma_mode is set. snps,en-tx-lpi-clockgating: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Enable gating of the MAC TX clock during TX low-power mode snps,multicast-filter-bins: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of multicast filter hash bins supported by this device instance snps,perfect-filter-entries: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Number of perfect filter entries supported by this device instance snps,ps-speed: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: Port selection speed that can be passed to the core when PCS is supported. For example, this is used in case of SGMII and @@ -307,25 +307,25 @@ allOf: snps,pbl: description: Programmable Burst Length (tx and rx) - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 4, 8] snps,txpbl: description: Tx Programmable Burst Length. If set, DMA tx will use this value rather than snps,pbl. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 4, 8] snps,rxpbl: description: Rx Programmable Burst Length. If set, DMA rx will use this value rather than snps,pbl. - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 4, 8] snps,no-pbl-x8: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core rev < 3.50, don\'t multiply the values by 4. @@ -351,7 +351,7 @@ allOf: then: properties: snps,tso: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Enables the TSO feature otherwise it will be managed by MAC HW capability register. diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index cbacc04fc9e6..8a03a24a2019 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -64,7 +64,7 @@ properties: - const: ether # for others socionext,syscon-phy-mode: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: A phandle to syscon with one argument that configures phy mode. The argument is the ID of MAC instance. diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index dadeb8f811c0..07a00f53adbf 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -70,7 +70,7 @@ properties: pinctrl-names: true syscon: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the system control device node which provides access to efuse IO range with MAC addresses diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml index 4050a3608658..047d757e8d82 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml @@ -47,31 +47,31 @@ properties: takes precedence. tx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Transmitt FIFO depth see dt-bindings/net/ti-dp83867.h for values rx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Receive FIFO depth see dt-bindings/net/ti-dp83867.h for values ti,clk-output-sel: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h for applicable values. The CLK_OUT pin can also be disabled by this property. When omitted, the PHY's default will be left as is. ti,rx-internal-delay: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values. Required only if interface type is PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID. ti,tx-internal-delay: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h for applicable values. Required only if interface type is @@ -101,7 +101,7 @@ properties: ti,fifo-depth: deprecated: true - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values. diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml index c3235f08e326..70a1209cb13b 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml @@ -44,22 +44,22 @@ properties: to a maximum value (70 ohms). tx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values rx-fifo-depth: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values ti,clk-output-sel: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values. ti,op-mode: - $ref: /schemas/types.yaml#definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 description: | Operational mode for the PHY. If this is not set then the operational mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 227270cbf892..c47b58f3e3f6 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -119,12 +119,12 @@ properties: description: label associated with this port ti,mac-only: - $ref: /schemas/types.yaml#definitions/flag + $ref: /schemas/types.yaml#/definitions/flag description: Specifies the port works in mac-only mode. ti,syscon-efuse: - $ref: /schemas/types.yaml#definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: Phandle to the system control device node which provides access to efuse IO range with MAC addresses diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index 6af999191559..85c2f699d602 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -136,7 +136,7 @@ properties: - const: tcl2host-status-ring qcom,rproc: - $ref: /schemas/types.yaml#definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle description: DT entry of q6v5-wcss remoteproc driver. Phandle to a node that can contain the following properties |