summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml')
-rw-r--r--Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml90
1 files changed, 90 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
new file mode 100644
index 000000000000..abd8d25e1136
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/invensense,icm42600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense ICM-426xx Inertial Measurement Unit
+
+maintainers:
+ - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+
+description: |
+ 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
+ accelerometer.
+
+ It has a configurable host interface that supports I3C, I2C and SPI serial
+ communication, features a 2kB FIFO and 2 programmable interrupts with
+ ultra-low-power wake-on-motion support to minimize system power consumption.
+
+ Other industry-leading features include InvenSense on-chip APEX Motion
+ Processing engine for gesture recognition, activity classification, and
+ pedometer, along with programmable digital filters, and an embedded
+ temperature sensor.
+
+ https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf
+
+properties:
+ compatible:
+ enum:
+ - invensense,icm42600
+ - invensense,icm42602
+ - invensense,icm42605
+ - invensense,icm42622
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ drive-open-drain:
+ type: boolean
+
+ vdd-supply:
+ description: Regulator that provides power to the sensor
+
+ vddio-supply:
+ description: Regulator that provides power to the bus
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icm42605@68 {
+ compatible = "invensense,icm42605";
+ reg = <0x68>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&vdd>;
+ vddio-supply = <&vddio>;
+ };
+ };
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icm42602@0 {
+ compatible = "invensense,icm42602";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ spi-cpha;
+ spi-cpol;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&vdd>;
+ vddio-supply = <&vddio>;
+ };
+ };