1 files changed, 0 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/bus/bcma.txt b/Documentation/devicetree/bindings/bus/bcma.txt
deleted file mode 100644
index edd44d802139..000000000000
--- a/Documentation/devicetree/bindings/bus/bcma.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Driver for ARM AXI Bus with Broadcom Plugins (bcma)
-
-Required properties:
-
-- compatible : brcm,bus-axi
-
-- reg : iomem address range of chipcommon core
-
-The cores on the AXI bus are automatically detected by bcma with the
-memory ranges they are using and they get registered afterwards.
-Automatic detection of the IRQ number is not working on
-BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
-them manually through device tree. Use an interrupt-map to specify the
-IRQ used by the devices on the bus. The first address is just an index,
-because we do not have any special register.
-
-The top-level axi bus may contain children representing attached cores
-(devices). This is needed since some hardware details can't be auto
-detected (e.g. IRQ numbers). Also some of the cores may be responsible
-for extra things, e.g. ChipCommon providing access to the GPIO chip.
-
-Example:
-
-	axi@18000000 {
-		compatible = "brcm,bus-axi";
-		reg = <0x18000000 0x1000>;
-		ranges = <0x00000000 0x18000000 0x00100000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0x000fffff 0xffff>;
-		interrupt-map =
-			/* Ethernet Controller 0 */
-			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 1 */
-			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-
-			/* PCIe Controller 0 */
-			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-
-		chipcommon {
-			reg = <0x00000000 0x1000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};