diff options
Diffstat (limited to 'Documentation/ABI')
22 files changed, 608 insertions, 40 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-class-rfkill b/Documentation/ABI/obsolete/sysfs-class-rfkill deleted file mode 100644 index ff60ad9eca4c..000000000000 --- a/Documentation/ABI/obsolete/sysfs-class-rfkill +++ /dev/null @@ -1,29 +0,0 @@ -rfkill - radio frequency (RF) connector kill switch support - -For details to this subsystem look at Documentation/rfkill.txt. - -What: /sys/class/rfkill/rfkill[0-9]+/state -Date: 09-Jul-2007 -KernelVersion v2.6.22 -Contact: linux-wireless@vger.kernel.org -Description: Current state of the transmitter. - This file is deprecated and scheduled to be removed in 2014, - because its not possible to express the 'soft and hard block' - state of the rfkill driver. -Values: A numeric value. - 0: RFKILL_STATE_SOFT_BLOCKED - transmitter is turned off by software - 1: RFKILL_STATE_UNBLOCKED - transmitter is (potentially) active - 2: RFKILL_STATE_HARD_BLOCKED - transmitter is forced off by something outside of - the driver's control. - -What: /sys/class/rfkill/rfkill[0-9]+/claim -Date: 09-Jul-2007 -KernelVersion v2.6.22 -Contact: linux-wireless@vger.kernel.org -Description: This file is deprecated because there no longer is a way to - claim just control over a single rfkill instance. - This file is scheduled to be removed in 2012. -Values: 0: Kernel handles events diff --git a/Documentation/ABI/testing/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio index 55ffa2df1c10..867c1fab20e2 100644 --- a/Documentation/ABI/testing/sysfs-gpio +++ b/Documentation/ABI/obsolete/sysfs-gpio @@ -1,7 +1,7 @@ What: /sys/class/gpio/ Date: July 2008 KernelVersion: 2.6.27 -Contact: David Brownell <dbrownell@users.sourceforge.net> +Contact: Linus Walleij <linusw@kernel.org> Description: As a Kconfig option, individual GPIO signals may be accessed from @@ -26,3 +26,5 @@ Description: /label ... (r/o) descriptive, not necessarily unique /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1) + This ABI is deprecated and will be removed after 2020. It is + replaced with the GPIO character device. diff --git a/Documentation/ABI/removed/sysfs-class-rfkill b/Documentation/ABI/removed/sysfs-class-rfkill new file mode 100644 index 000000000000..3ce6231f20b2 --- /dev/null +++ b/Documentation/ABI/removed/sysfs-class-rfkill @@ -0,0 +1,13 @@ +rfkill - radio frequency (RF) connector kill switch support + +For details to this subsystem look at Documentation/rfkill.txt. + +What: /sys/class/rfkill/rfkill[0-9]+/claim +Date: 09-Jul-2007 +KernelVersion v2.6.22 +Contact: linux-wireless@vger.kernel.org +Description: This file was deprecated because there no longer was a way to + claim just control over a single rfkill instance. + This file was scheduled to be removed in 2012, and was removed + in 2016. +Values: 0: Kernel handles events diff --git a/Documentation/ABI/stable/firewire-cdev b/Documentation/ABI/stable/firewire-cdev index 16d030827368..f72ed653878a 100644 --- a/Documentation/ABI/stable/firewire-cdev +++ b/Documentation/ABI/stable/firewire-cdev @@ -100,4 +100,5 @@ Description: Users: libraw1394 libdc1394 - tools like jujuutils, fwhack, ... + libhinawa + tools like linux-firewire-utils, fwhack, ... diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus index 636e938d5e33..5d0125f7bcaf 100644 --- a/Documentation/ABI/stable/sysfs-bus-vmbus +++ b/Documentation/ABI/stable/sysfs-bus-vmbus @@ -27,3 +27,17 @@ Description: The mapping of which primary/sub channels are bound to which Virtual Processors. Format: <channel's child_relid:the bound cpu's number> Users: tools/hv/lsvmbus + +What: /sys/bus/vmbus/devices/vmbus_*/device +Date: Dec. 2015 +KernelVersion: 4.5 +Contact: K. Y. Srinivasan <kys@microsoft.com> +Description: The 16 bit device ID of the device +Users: tools/hv/lsvmbus and user level RDMA libraries + +What: /sys/bus/vmbus/devices/vmbus_*/vendor +Date: Dec. 2015 +KernelVersion: 4.5 +Contact: K. Y. Srinivasan <kys@microsoft.com> +Description: The 16 bit vendor ID of the device +Users: tools/hv/lsvmbus and user level RDMA libraries diff --git a/Documentation/ABI/stable/sysfs-class-rfkill b/Documentation/ABI/stable/sysfs-class-rfkill index 097f522c33bb..e1ba4a104753 100644 --- a/Documentation/ABI/stable/sysfs-class-rfkill +++ b/Documentation/ABI/stable/sysfs-class-rfkill @@ -2,9 +2,8 @@ rfkill - radio frequency (RF) connector kill switch support For details to this subsystem look at Documentation/rfkill.txt. -For the deprecated /sys/class/rfkill/*/state and -/sys/class/rfkill/*/claim knobs of this interface look in -Documentation/ABI/obsolete/sysfs-class-rfkill. +For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in +Documentation/ABI/removed/sysfs-class-rfkill. What: /sys/class/rfkill Date: 09-Jul-2007 @@ -42,6 +41,28 @@ Values: A numeric value. 1: true +What: /sys/class/rfkill/rfkill[0-9]+/state +Date: 09-Jul-2007 +KernelVersion v2.6.22 +Contact: linux-wireless@vger.kernel.org +Description: Current state of the transmitter. + This file was scheduled to be removed in 2014, but due to its + large number of users it will be sticking around for a bit + longer. Despite it being marked as stabe, the newer "hard" and + "soft" interfaces should be preffered, since it is not possible + to express the 'soft and hard block' state of the rfkill driver + through this interface. There will likely be another attempt to + remove it in the future. +Values: A numeric value. + 0: RFKILL_STATE_SOFT_BLOCKED + transmitter is turned off by software + 1: RFKILL_STATE_UNBLOCKED + transmitter is (potentially) active + 2: RFKILL_STATE_HARD_BLOCKED + transmitter is forced off by something outside of + the driver's control. + + What: /sys/class/rfkill/rfkill[0-9]+/hard Date: 12-March-2010 KernelVersion v2.6.34 diff --git a/Documentation/ABI/stable/sysfs-fs-orangefs b/Documentation/ABI/stable/sysfs-fs-orangefs new file mode 100644 index 000000000000..affdb114bd33 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-fs-orangefs @@ -0,0 +1,87 @@ +What: /sys/fs/orangefs/perf_counters/* +Date: Jun 2015 +Contact: Mike Marshall <hubcap@omnibond.com> +Description: + Counters and settings for various caches. + Read only. + + +What: /sys/fs/orangefs/perf_counter_reset +Date: June 2015 +Contact: Mike Marshall <hubcap@omnibond.com> +Description: + echo a 0 or a 1 into perf_counter_reset to + reset all the counters in + /sys/fs/orangefs/perf_counters + except ones with PINT_PERF_PRESERVE set. + + +What: /sys/fs/orangefs/perf_time_interval_secs +Date: Jun 2015 +Contact: Mike Marshall <hubcap@omnibond.com> +Description: + Length of perf counter intervals in + seconds. + + +What: /sys/fs/orangefs/perf_history_size +Date: Jun 2015 +Contact: Mike Marshall <hubcap@omnibond.com> +Description: + The perf_counters cache statistics have N, or + perf_history_size, samples. The default is + one. + + Every perf_time_interval_secs the (first) + samples are reset. + + If N is greater than one, the "current" set + of samples is reset, and the samples from the + other N-1 intervals remain available. + + +What: /sys/fs/orangefs/op_timeout_secs +Date: Jun 2015 +Contact: Mike Marshall <hubcap@omnibond.com> +Description: + Service operation timeout in seconds. + + +What: /sys/fs/orangefs/slot_timeout_secs +Date: Jun 2015 +Contact: Mike Marshall <hubcap@omnibond.com> +Description: + "Slot" timeout in seconds. A "slot" + is an indexed buffer in the shared + memory segment used for communication + between the kernel module and userspace. + Slots are requested and waited for, + the wait times out after slot_timeout_secs. + + +What: /sys/fs/orangefs/acache/* +Date: Jun 2015 +Contact: Mike Marshall <hubcap@omnibond.com> +Description: + Attribute cache configurable settings. + + +What: /sys/fs/orangefs/ncache/* +Date: Jun 2015 +Contact: Mike Marshall <hubcap@omnibond.com> +Description: + Name cache configurable settings. + + +What: /sys/fs/orangefs/capcache/* +Date: Jun 2015 +Contact: Mike Marshall <hubcap@omnibond.com> +Description: + Capability cache configurable settings. + + +What: /sys/fs/orangefs/ccache/* +Date: Jun 2015 +Contact: Mike Marshall <hubcap@omnibond.com> +Description: + Credential cache configurable settings. diff --git a/Documentation/ABI/testing/gpio-cdev b/Documentation/ABI/testing/gpio-cdev new file mode 100644 index 000000000000..7b265fbb47e3 --- /dev/null +++ b/Documentation/ABI/testing/gpio-cdev @@ -0,0 +1,26 @@ +What: /dev/gpiochip[0-9]+ +Date: November 2015 +KernelVersion: 4.4 +Contact: linux-gpio@vger.kernel.org +Description: + The character device files /dev/gpiochip* are the interface + between GPIO chips and userspace. + + The ioctl(2)-based ABI is defined and documented in + [include/uapi]<linux/gpio.h>. + + The following file operations are supported: + + open(2) + Currently the only useful flags are O_RDWR. + + ioctl(2) + Initiate various actions. + See the inline documentation in [include/uapi]<linux/gpio.h> + for descriptions of all ioctls. + + close(2) + Stops and free up the I/O contexts that was associated + with the file descriptor. + +Users: TBD diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 0a378a88217a..bb0f9a135e21 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -27,6 +27,7 @@ Description: base: func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK] [FIRMWARE_CHECK] + [KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK] mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND] [[^]MAY_EXEC] fsmagic:= hex value diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 0439c2aaf741..3c6624881375 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -496,8 +496,11 @@ Description: 1kohm_to_gnd: connected to ground via an 1kOhm resistor, 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 20kohm_to_gnd: connected to ground via a 20kOhm resistor, + 90kohm_to_gnd: connected to ground via a 90kOhm resistor, 100kohm_to_gnd: connected to ground via an 100kOhm resistor, + 125kohm_to_gnd: connected to ground via an 125kOhm resistor, 500kohm_to_gnd: connected to ground via a 500kOhm resistor, + 640kohm_to_gnd: connected to ground via a 640kOhm resistor, three_state: left floating. For a list of available output power down options read outX_powerdown_mode_available. If Y is not present the @@ -1491,3 +1494,10 @@ Description: This ABI is especially applicable for humidity sensors to heatup the device and get rid of any condensation in some humidity environment + +What: /sys/bus/iio/devices/iio:deviceX/in_ph_raw +KernelVersion: 4.5 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no offset etc.) pH reading of a substance as a negative + base-10 logarithm of hydrodium ions in a litre of water. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x new file mode 100644 index 000000000000..3740f253d406 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x @@ -0,0 +1,54 @@ +What: /sys/bus/iio/devices/iio:deviceX/tia_resistanceY + /sys/bus/iio/devices/iio:deviceX/tia_capacitanceY +Date: December 2015 +KernelVersion: +Contact: Andrew F. Davis <afd@ti.com> +Description: + Get and set the resistance and the capacitance settings for the + Transimpedance Amplifier. Y is 1 for Rf1 and Cf1, Y is 2 for + Rf2 and Cf2 values. + +What: /sys/bus/iio/devices/iio:deviceX/tia_separate_en +Date: December 2015 +KernelVersion: +Contact: Andrew F. Davis <afd@ti.com> +Description: + Enable or disable separate settings for the TransImpedance + Amplifier above, when disabled both values are set by the + first channel. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_raw + /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_ambient_raw +Date: December 2015 +KernelVersion: +Contact: Andrew F. Davis <afd@ti.com> +Description: + Get measured values from the ADC for these stages. Y is the + specific LED number. The values are expressed in 24-bit twos + complement. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY-ledY_ambient_raw +Date: December 2015 +KernelVersion: +Contact: Andrew F. Davis <afd@ti.com> +Description: + Get differential values from the ADC for these stages. Y is the + specific LED number. The values are expressed in 24-bit twos + complement for the specified LEDs. + +What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_offset + /sys/bus/iio/devices/iio:deviceX/out_current_ledY_ambient_offset +Date: December 2015 +KernelVersion: +Contact: Andrew F. Davis <afd@ti.com> +Description: + Get and set the offset cancellation DAC setting for these + stages. The values are expressed in 5-bit sign-magnitude. + +What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_raw +Date: December 2015 +KernelVersion: +Contact: Andrew F. Davis <afd@ti.com> +Description: + Get and set the LED current for the specified LED. Y is the + specific LED number. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 b/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 new file mode 100644 index 000000000000..6275e9f56e6c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 @@ -0,0 +1,15 @@ +What: /sys/bus/iio/devices/iio:deviceX/meas_conf +What: /sys/bus/iio/devices/iio:deviceX/meas_conf_available +KernelVersion: 4.5 +Contact: linux-iio@vger.kernel.org +Description: + Current configuration and available configurations + for the bias current. + normal - Normal measurement configurations (default) + positivebias - Positive bias configuration + negativebias - Negative bias configuration + disabled - Only available on HMC5983. Disables magnetic + sensor and enables temperature sensor. + Note: The effect of this configuration may vary + according to the device. For exact documentation + check the device's datasheet. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-vf610 b/Documentation/ABI/testing/sysfs-bus-iio-vf610 index ecbc1f4af921..308a6756d3bf 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-vf610 +++ b/Documentation/ABI/testing/sysfs-bus-iio-vf610 @@ -5,3 +5,12 @@ Description: Specifies the hardware conversion mode used. The three available modes are "normal", "high-speed" and "low-power", where the last is the default mode. + + +What: /sys/bus/iio/devices/iio:deviceX/out_conversion_mode +KernelVersion: 4.6 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the hardware conversion mode used within DAC. + The two available modes are "high-power" and "low-power", + where "low-power" mode is the default mode. diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl index b07e86d4597f..7fd737eed38a 100644 --- a/Documentation/ABI/testing/sysfs-class-cxl +++ b/Documentation/ABI/testing/sysfs-class-cxl @@ -159,7 +159,7 @@ Description: read only Decimal value of the Per Process MMIO space length. Users: https://github.com/ibm-capi/libcxl -What: /sys/class/cxl/<afu>m/pp_mmio_off +What: /sys/class/cxl/<afu>m/pp_mmio_off (not in a guest) Date: September 2014 Contact: linuxppc-dev@lists.ozlabs.org Description: read only @@ -183,7 +183,7 @@ Description: read only Identifies the revision level of the PSL. Users: https://github.com/ibm-capi/libcxl -What: /sys/class/cxl/<card>/base_image +What: /sys/class/cxl/<card>/base_image (not in a guest) Date: September 2014 Contact: linuxppc-dev@lists.ozlabs.org Description: read only @@ -193,7 +193,7 @@ Description: read only during the initial program load. Users: https://github.com/ibm-capi/libcxl -What: /sys/class/cxl/<card>/image_loaded +What: /sys/class/cxl/<card>/image_loaded (not in a guest) Date: September 2014 Contact: linuxppc-dev@lists.ozlabs.org Description: read only @@ -201,7 +201,7 @@ Description: read only onto the card. Users: https://github.com/ibm-capi/libcxl -What: /sys/class/cxl/<card>/load_image_on_perst +What: /sys/class/cxl/<card>/load_image_on_perst (not in a guest) Date: December 2014 Contact: linuxppc-dev@lists.ozlabs.org Description: read/write @@ -224,7 +224,7 @@ Description: write only to reload the FPGA depending on load_image_on_perst. Users: https://github.com/ibm-capi/libcxl -What: /sys/class/cxl/<card>/perst_reloads_same_image +What: /sys/class/cxl/<card>/perst_reloads_same_image (not in a guest) Date: July 2015 Contact: linuxppc-dev@lists.ozlabs.org Description: read/write diff --git a/Documentation/ABI/testing/sysfs-class-net-batman-adv b/Documentation/ABI/testing/sysfs-class-net-batman-adv index 7f34a95bb963..518f6a1dbc0c 100644 --- a/Documentation/ABI/testing/sysfs-class-net-batman-adv +++ b/Documentation/ABI/testing/sysfs-class-net-batman-adv @@ -1,4 +1,20 @@ +What: /sys/class/net/<iface>/batman-adv/throughput_override +Date: Feb 2014 +Contact: Antonio Quartulli <antonio@meshcoding.com> +description: + Defines the throughput value to be used by B.A.T.M.A.N. V + when estimating the link throughput using this interface. + If the value is set to 0 then batman-adv will try to + estimate the throughput by itself. + +What: /sys/class/net/<iface>/batman-adv/elp_interval +Date: Feb 2014 +Contact: Linus Lüssing <linus.luessing@web.de> +Description: + Defines the interval in milliseconds in which batman + sends its probing packets for link quality measurements. + What: /sys/class/net/<iface>/batman-adv/iface_status Date: May 2010 Contact: Marek Lindner <mareklindner@neomailbox.ch> @@ -12,4 +28,3 @@ Description: The /sys/class/net/<iface>/batman-adv/mesh_iface file displays the batman mesh interface this <iface> currently is associated with. - diff --git a/Documentation/ABI/testing/sysfs-class-rc-nuvoton b/Documentation/ABI/testing/sysfs-class-rc-nuvoton new file mode 100644 index 000000000000..905bcdeedef2 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rc-nuvoton @@ -0,0 +1,15 @@ +What: /sys/class/rc/rcN/wakeup_data +Date: Mar 2016 +KernelVersion: 4.6 +Contact: Mauro Carvalho Chehab <m.chehab@samsung.com> +Description: + Reading this file returns the stored CIR wakeup sequence. + It starts with a pulse, followed by a space, pulse etc. + All values are in microseconds. + The same format can be used to store a wakeup sequence + in the Nuvoton chip by writing to this file. + + Note: Some systems reset the stored wakeup sequence to a + factory default on each boot. On such systems store the + wakeup sequence in a file and set it on boot using e.g. + a udev rule. diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index b683e8ee69ec..16501334b99f 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -271,3 +271,72 @@ Description: Parameters for the CPU cache attributes - WriteBack: data is written only to the cache line and the modified cache line is written to main memory only when it is replaced + +What: /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats + /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/turbo_stat + /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/sub_turbo_stat + /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/unthrottle + /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/powercap + /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overtemp + /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/supply_fault + /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overcurrent + /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/occ_reset +Date: March 2016 +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> + Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: POWERNV CPUFreq driver's frequency throttle stats directory and + attributes + + 'cpuX/cpufreq/throttle_stats' directory contains the CPU frequency + throttle stat attributes for the chip. The throttle stats of a cpu + is common across all the cpus belonging to a chip. Below are the + throttle attributes exported in the 'throttle_stats' directory: + + - turbo_stat : This file gives the total number of times the max + frequency is throttled to lower frequency in turbo (at and above + nominal frequency) range of frequencies. + + - sub_turbo_stat : This file gives the total number of times the + max frequency is throttled to lower frequency in sub-turbo(below + nominal frequency) range of frequencies. + + - unthrottle : This file gives the total number of times the max + frequency is unthrottled after being throttled. + + - powercap : This file gives the total number of times the max + frequency is throttled due to 'Power Capping'. + + - overtemp : This file gives the total number of times the max + frequency is throttled due to 'CPU Over Temperature'. + + - supply_fault : This file gives the total number of times the + max frequency is throttled due to 'Power Supply Failure'. + + - overcurrent : This file gives the total number of times the + max frequency is throttled due to 'Overcurrent'. + + - occ_reset : This file gives the total number of times the max + frequency is throttled due to 'OCC Reset'. + + The sysfs attributes representing different throttle reasons like + powercap, overtemp, supply_fault, overcurrent and occ_reset map to + the reasons provided by OCC firmware for throttling the frequency. + +What: /sys/devices/system/cpu/cpufreq/policyX/throttle_stats + /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/turbo_stat + /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/sub_turbo_stat + /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/unthrottle + /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/powercap + /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/overtemp + /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/supply_fault + /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/overcurrent + /sys/devices/system/cpu/cpufreq/policyX/throttle_stats/occ_reset +Date: March 2016 +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> + Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: POWERNV CPUFreq driver's frequency throttle stats directory and + attributes + + 'policyX/throttle_stats' directory and all the attributes are same as + the /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats directory and + attributes which give the frequency throttle information of the chip. diff --git a/Documentation/ABI/testing/sysfs-driver-toshiba_acpi b/Documentation/ABI/testing/sysfs-driver-toshiba_acpi index eed922ef42e5..f34221b52b14 100644 --- a/Documentation/ABI/testing/sysfs-driver-toshiba_acpi +++ b/Documentation/ABI/testing/sysfs-driver-toshiba_acpi @@ -179,3 +179,19 @@ Description: This file controls the USB 3 functionality, valid values are: Note that toggling this value requires a reboot for changes to take effect. Users: KToshiba + +What: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS{1900,620{0,7,8}}:00/cooling_method +Date: 2016 +KernelVersion: 4.6 +Contact: Azael Avalos <coproscefalo@gmail.com> +Description: This file controls the Cooling Method feature. + Reading this file prints two values, the first is the actual cooling method + and the second is the maximum cooling method supported. + When the maximum cooling method is ONE, valid values are: + * 0 -> Maximum Performance + * 1 -> Battery Optimized + When the maximum cooling method is TWO, valid values are: + * 0 -> Maximum Performance + * 1 -> Performance + * 2 -> Battery Optimized +Users: KToshiba diff --git a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg new file mode 100644 index 000000000000..011dda4f8e8a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg @@ -0,0 +1,100 @@ +What: /sys/firmware/qemu_fw_cfg/ +Date: August 2015 +Contact: Gabriel Somlo <somlo@cmu.edu> +Description: + Several different architectures supported by QEMU (x86, arm, + sun4*, ppc/mac) are provisioned with a firmware configuration + (fw_cfg) device, originally intended as a way for the host to + provide configuration data to the guest firmware. Starting + with QEMU v2.4, arbitrary fw_cfg file entries may be specified + by the user on the command line, which makes fw_cfg additionally + useful as an out-of-band, asynchronous mechanism for providing + configuration data to the guest userspace. + + The authoritative guest-side hardware interface documentation + to the fw_cfg device can be found in "docs/specs/fw_cfg.txt" + in the QEMU source tree. + + === SysFS fw_cfg Interface === + + The fw_cfg sysfs interface described in this document is only + intended to display discoverable blobs (i.e., those registered + with the file directory), as there is no way to determine the + presence or size of "legacy" blobs (with selector keys between + 0x0002 and 0x0018) programmatically. + + All fw_cfg information is shown under: + + /sys/firmware/qemu_fw_cfg/ + + The only legacy blob displayed is the fw_cfg device revision: + + /sys/firmware/qemu_fw_cfg/rev + + --- Discoverable fw_cfg blobs by selector key --- + + All discoverable blobs listed in the fw_cfg file directory are + displayed as entries named after their unique selector key + value, e.g.: + + /sys/firmware/qemu_fw_cfg/by_key/32 + /sys/firmware/qemu_fw_cfg/by_key/33 + /sys/firmware/qemu_fw_cfg/by_key/34 + ... + + Each such fw_cfg sysfs entry has the following values exported + as attributes: + + name : The 56-byte nul-terminated ASCII string used as the + blob's 'file name' in the fw_cfg directory. + size : The length of the blob, as given in the fw_cfg + directory. + key : The value of the blob's selector key as given in the + fw_cfg directory. This value is the same as used in + the parent directory name. + raw : The raw bytes of the blob, obtained by selecting the + entry via the control register, and reading a number + of bytes equal to the blob size from the data + register. + + --- Listing fw_cfg blobs by file name --- + + While the fw_cfg device does not impose any specific naming + convention on the blobs registered in the file directory, + QEMU developers have traditionally used path name semantics + to give each blob a descriptive name. For example: + + "bootorder" + "genroms/kvmvapic.bin" + "etc/e820" + "etc/boot-fail-wait" + "etc/system-states" + "etc/table-loader" + "etc/acpi/rsdp" + "etc/acpi/tables" + "etc/smbios/smbios-tables" + "etc/smbios/smbios-anchor" + ... + + In addition to the listing by unique selector key described + above, the fw_cfg sysfs driver also attempts to build a tree + of directories matching the path name components of fw_cfg + blob names, ending in symlinks to the by_key entry for each + "basename", as illustrated below (assume current directory is + /sys/firmware): + + qemu_fw_cfg/by_name/bootorder -> ../by_key/38 + qemu_fw_cfg/by_name/etc/e820 -> ../../by_key/35 + qemu_fw_cfg/by_name/etc/acpi/rsdp -> ../../../by_key/41 + ... + + Construction of the directory tree and symlinks is done on a + "best-effort" basis, as there is no guarantee that components + of fw_cfg blob names are always "well behaved". I.e., there is + the possibility that a symlink (basename) will conflict with + a dirname component of another fw_cfg blob, in which case the + creation of the offending /sys/firmware/qemu_fw_cfg/by_name + entry will be skipped. + + The authoritative list of entries will continue to be found + under the /sys/firmware/qemu_fw_cfg/by_key directory. diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index e5200f354abf..a809f6005f14 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -98,3 +98,17 @@ Date: October 2015 Contact: "Chao Yu" <chao2.yu@samsung.com> Description: Controls the count of nid pages to be readaheaded. + +What: /sys/fs/f2fs/<disk>/dirty_nats_ratio +Date: January 2016 +Contact: "Chao Yu" <chao2.yu@samsung.com> +Description: + Controls dirty nat entries ratio threshold, if current + ratio exceeds configured threshold, checkpoint will + be triggered for flushing dirty nat entries. + +What: /sys/fs/f2fs/<disk>/lifetime_write_kbytes +Date: January 2016 +Contact: "Shuoran Liu" <liushuoran@huawei.com> +Description: + Shows total written kbytes issued to disk. diff --git a/Documentation/ABI/testing/sysfs-platform-hidma-mgmt b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt new file mode 100644 index 000000000000..c2fb5d033f0e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt @@ -0,0 +1,97 @@ +What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/priority + /sys/devices/platform/QCOM8060:*/chanops/chan*/priority +Date: Nov 2015 +KernelVersion: 4.4 +Conta |