diff options
Diffstat (limited to 'Documentation/ABI')
21 files changed, 408 insertions, 204 deletions
diff --git a/Documentation/ABI/obsolete/proc-pid-oom_adj b/Documentation/ABI/obsolete/proc-pid-oom_adj deleted file mode 100644 index 9a3cb88ade47..000000000000 --- a/Documentation/ABI/obsolete/proc-pid-oom_adj +++ /dev/null @@ -1,22 +0,0 @@ -What: /proc/<pid>/oom_adj -When: August 2012 -Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's - badness heuristic used to determine which task to kill when the kernel - is out of memory. - - The badness heuristic has since been rewritten since the introduction of - this tunable such that its meaning is deprecated. The value was - implemented as a bitshift on a score generated by the badness() - function that did not have any precise units of measure. With the - rewrite, the score is given as a proportion of available memory to the - task allocating pages, so using a bitshift which grows the score - exponentially is, thus, impossible to tune with fine granularity. - - A much more powerful interface, /proc/<pid>/oom_score_adj, was - introduced with the oom killer rewrite that allows users to increase or - decrease the badness score linearly. This interface will replace - /proc/<pid>/oom_adj. - - A warning will be emitted to the kernel log if an application uses this - deprecated interface. After it is printed once, future warnings will be - suppressed until the kernel is rebooted. diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus index c2a270b45b03..833fd59926a7 100644 --- a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus @@ -8,3 +8,41 @@ Description: The integer value of this attribute ranges from 0-4. When written, this file sets the number of the startup profile and the mouse activates this profile immediately. Please use actual_profile, it does the same thing. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the raw integer version number of the + firmware reported by the mouse. Using the integer value eases + further usage in other programs. To receive the real version + number the decimal point has to be shifted 2 positions to the + left. E.g. a returned value of 121 means 1.21 + This file is readonly. + Please read binary attribute info which contains firmware version. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds information about button layout. + When read, these files return the respective profile buttons. + The returned data is 77 bytes in size. + This file is readonly. + Write control to select profile and read profile_buttons instead. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds information like resolution, sensitivity + and light effects. + When read, these files return the respective profile settings. + The returned data is 43 bytes in size. + This file is readonly. + Write control to select profile and read profile_settings instead. +Users: http://roccat.sourceforge.net
\ No newline at end of file diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus new file mode 100644 index 000000000000..4a98e02b6c6a --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus @@ -0,0 +1,66 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_cpi +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 1-4. + When read, this attribute returns the number of the active + cpi level. + This file is readonly. + Has never been used. If bookkeeping is done, it's done in userland tools. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 1-10. + When read, this attribute returns the number of the actual + sensitivity in x direction. + This file is readonly. + Has never been used. If bookkeeping is done, it's done in userland tools. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 1-10. + When read, this attribute returns the number of the actual + sensitivity in y direction. + This file is readonly. + Has never been used. If bookkeeping is done, it's done in userland tools. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the raw integer version number of the + firmware reported by the mouse. Using the integer value eases + further usage in other programs. To receive the real version + number the decimal point has to be shifted 2 positions to the + left. E.g. a returned value of 121 means 1.21 + This file is readonly. + Obsoleted by binary sysfs attribute "info". +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds information about button layout. + When read, these files return the respective profile buttons. + The returned data is 23 bytes in size. + This file is readonly. + Write control to select profile and read profile_buttons instead. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds information like resolution, sensitivity + and light effects. + When read, these files return the respective profile settings. + The returned data is 16 bytes in size. + This file is readonly. + Write control to select profile and read profile_settings instead. +Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra new file mode 100644 index 000000000000..87ac87e9556d --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra @@ -0,0 +1,73 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: It is possible to switch the cpi setting of the mouse with the + press of a button. + When read, this file returns the raw number of the actual cpi + setting reported by the mouse. This number has to be further + processed to receive the real dpi value. + + VALUE DPI + 1 400 + 2 800 + 4 1600 + + This file is readonly. + Has never been used. If bookkeeping is done, it's done in userland tools. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the number of the actual profile in + range 0-4. + This file is readonly. + Please use binary attribute "settings" which provides this information. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the raw integer version number of the + firmware reported by the mouse. Using the integer value eases + further usage in other programs. To receive the real version + number the decimal point has to be shifted 2 positions to the + left. E.g. a returned value of 138 means 1.38 + This file is readonly. + Please use binary attribute "info" which provides this information. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds information about button layout. + When read, these files return the respective profile buttons. + The returned data is 19 bytes in size. + This file is readonly. + Write control to select profile and read profile_buttons instead. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds information like resolution, sensitivity + and light effects. + When read, these files return the respective profile settings. + The returned data is 13 bytes in size. + This file is readonly. + Write control to select profile and read profile_settings instead. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 0-4. + When read, this attribute returns the number of the profile + that's active when the mouse is powered on. + This file is readonly. + Please use binary attribute "settings" which provides this information. +Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 6cd6daefaaed..986946613542 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -12,11 +12,14 @@ Description: then closing the file. The new policy takes effect after the file ima/policy is closed. + IMA appraisal, if configured, uses these file measurements + for local measurement appraisal. + rule format: action [condition ...] - action: measure | dont_measure + action: measure | dont_measure | appraise | dont_appraise | audit condition:= base | lsm - base: [[func=] [mask=] [fsmagic=] [uid=]] + base: [[func=] [mask=] [fsmagic=] [uid=] [fowner]] lsm: [[subj_user=] [subj_role=] [subj_type=] [obj_user=] [obj_role=] [obj_type=]] @@ -24,36 +27,50 @@ Description: mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC] fsmagic:= hex value uid:= decimal value + fowner:=decimal value lsm: are LSM specific default policy: # PROC_SUPER_MAGIC dont_measure fsmagic=0x9fa0 + dont_appraise fsmagic=0x9fa0 # SYSFS_MAGIC dont_measure fsmagic=0x62656572 + dont_appraise fsmagic=0x62656572 # DEBUGFS_MAGIC dont_measure fsmagic=0x64626720 + dont_appraise fsmagic=0x64626720 # TMPFS_MAGIC dont_measure fsmagic=0x01021994 + dont_appraise fsmagic=0x01021994 + # RAMFS_MAGIC + dont_measure fsmagic=0x858458f6 + dont_appraise fsmagic=0x858458f6 # SECURITYFS_MAGIC dont_measure fsmagic=0x73636673 + dont_appraise fsmagic=0x73636673 measure func=BPRM_CHECK measure func=FILE_MMAP mask=MAY_EXEC measure func=FILE_CHECK mask=MAY_READ uid=0 + appraise fowner=0 The default policy measures all executables in bprm_check, all files mmapped executable in file_mmap, and all files - open for read by root in do_filp_open. + open for read by root in do_filp_open. The default appraisal + policy appraises all files owned by root. Examples of LSM specific definitions: SELinux: # SELINUX_MAGIC - dont_measure fsmagic=0xF97CFF8C + dont_measure fsmagic=0xf97cff8c + dont_appraise fsmagic=0xf97cff8c dont_measure obj_type=var_log_t + dont_appraise obj_type=var_log_t dont_measure obj_type=auditd_log_t + dont_appraise obj_type=auditd_log_t measure subj_user=system_u func=FILE_CHECK mask=MAY_READ measure subj_role=system_r func=FILE_CHECK mask=MAY_READ diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index c1eb41cb9876..279da08f7541 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -206,3 +206,17 @@ Description: when a discarded area is read the discard_zeroes_data parameter will be set to one. Otherwise it will be 0 and the result of reading a discarded area is undefined. + +What: /sys/block/<disk>/queue/write_same_max_bytes +Date: January 2012 +Contact: Martin K. Petersen <martin.petersen@oracle.com> +Description: + Some devices support a write same operation in which a + single data block can be written to a range of several + contiguous blocks on storage. This can be used to wipe + areas on disk or to initialize drives in a RAID + configuration. write_same_max_bytes indicates how many + bytes can be written in a single write same command. If + write_same_max_bytes is 0, write same is not supported + by the device. + diff --git a/Documentation/ABI/testing/sysfs-bus-fcoe b/Documentation/ABI/testing/sysfs-bus-fcoe index 469d09c02f6b..50e2a80ea28f 100644 --- a/Documentation/ABI/testing/sysfs-bus-fcoe +++ b/Documentation/ABI/testing/sysfs-bus-fcoe @@ -9,19 +9,19 @@ Attributes: this value will change the dev_loss_tmo for all FCFs discovered by this controller. - lesb_link_fail: Link Error Status Block (LESB) link failure count. + lesb/link_fail: Link Error Status Block (LESB) link failure count. - lesb_vlink_fail: Link Error Status Block (LESB) virtual link + lesb/vlink_fail: Link Error Status Block (LESB) virtual link failure count. - lesb_miss_fka: Link Error Status Block (LESB) missed FCoE + lesb/miss_fka: Link Error Status Block (LESB) missed FCoE Initialization Protocol (FIP) Keep-Alives (FKA). - lesb_symb_err: Link Error Status Block (LESB) symbolic error count. + lesb/symb_err: Link Error Status Block (LESB) symbolic error count. - lesb_err_block: Link Error Status Block (LESB) block error count. + lesb/err_block: Link Error Status Block (LESB) block error count. - lesb_fcs_error: Link Error Status Block (LESB) Fibre Channel + lesb/fcs_error: Link Error Status Block (LESB) Fibre Channel Serivces error count. Notes: ctlr_X (global increment starting at 0) diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd index 3c17b62899f6..1cf2adf46b11 100644 --- a/Documentation/ABI/testing/sysfs-bus-rbd +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -25,6 +25,10 @@ client_id The ceph unique client id that was assigned for this specific session. +features + + A hexadecimal encoding of the feature bits for this image. + major The block device major number. @@ -33,6 +37,11 @@ name The name of the rbd image. +image_id + + The unique id for the rbd image. (For rbd image format 1 + this is empty.) + pool The name of the storage pool where this rbd image resides. @@ -57,12 +66,6 @@ current_snap The current snapshot for which the device is mapped. -create_snap - - Create a snapshot: - - $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create - snap_* A directory per each snapshot @@ -79,4 +82,7 @@ snap_size The size of the image when this snapshot was taken. +snap_features + + A hexadecimal encoding of the feature bits for this snapshot. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 5f75f8f7df34..b6fbe514a869 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -220,3 +220,10 @@ Description: If the device doesn't support LTM, the file will read "no". The file will be present for all speeds of USB devices, and will always read "no" for USB 1.1 and USB 2.0 devices. + +What: /sys/bus/usb/devices/.../(hub interface)/portX +Date: August 2012 +Contact: Lan Tianyu <tianyu.lan@intel.com> +Description: + The /sys/bus/usb/devices/.../(hub interface)/portX + is usb port device's sysfs directory. diff --git a/Documentation/ABI/testing/sysfs-devices-firmware_node b/Documentation/ABI/testing/sysfs-devices-firmware_node new file mode 100644 index 000000000000..46badc9ea284 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-firmware_node @@ -0,0 +1,17 @@ +What: /sys/devices/.../firmware_node/ +Date: September 2012 +Contact: <> +Description: + The /sys/devices/.../firmware_node directory contains attributes + allowing the user space to check and modify some firmware + related properties of given device. + +What: /sys/devices/.../firmware_node/description +Date: September 2012 +Contact: Lance Ortiz <lance.ortiz@hp.com> +Description: + The /sys/devices/.../firmware/description attribute contains a string + that describes the device as provided by the _STR method in the ACPI + namespace. This attribute is read-only. If the device does not have + an _STR method associated with it in the ACPI namespace, this + attribute is not present. diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 5dab36448b44..6943133afcb8 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -176,3 +176,14 @@ Description: Disable L3 cache indices All AMD processors with L3 caches provide this functionality. For details, see BKDGs at http://developer.amd.com/documentation/guides/Pages/default.aspx + + +What: /sys/devices/system/cpu/cpufreq/boost +Date: August 2012 +Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> +Description: Processor frequency boosting control + + This switch controls the boost setting for the whole system. + Boosting allows the CPU and the firmware to run at a frequency + beyound it's nominal limit. + More details can be found in Documentation/cpu-freq/boost.txt diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku b/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku index 189dc43891bf..9eca5a182e64 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-isku @@ -117,6 +117,14 @@ Description: When written, this file lets one store macros with max 500 which profile and key to read. Users: http://roccat.sourceforge.net +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/reset +Date: November 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one reset the device. + The data has to be 3 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/control Date: June 2011 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus index 65e6e5dd67e8..7bd776f9c3c7 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus @@ -9,15 +9,12 @@ Description: The integer value of this attribute ranges from 0-4. and the mouse activates this profile immediately. Users: http://roccat.sourceforge.net -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version -Date: October 2010 +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info +Date: November 2012 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> -Description: When read, this file returns the raw integer version number of the - firmware reported by the mouse. Using the integer value eases - further usage in other programs. To receive the real version - number the decimal point has to be shifted 2 positions to the - left. E.g. a returned value of 121 means 1.21 - This file is readonly. +Description: When read, this file returns general data like firmware version. + When written, the device can be reset. + The data is 8 bytes long. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro @@ -42,18 +39,8 @@ Description: The mouse can store 5 profiles which can be switched by the The mouse will reject invalid data. Which profile to write is determined by the profile number contained in the data. - This file is writeonly. -Users: http://roccat.sourceforge.net - -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons -Date: August 2010 -Contact: Stefan Achatz <erazor_de@users.sourceforge.net> -Description: The mouse can store 5 profiles which can be switched by the - press of a button. A profile is split in settings and buttons. - profile_buttons holds information about button layout. - When read, these files return the respective profile buttons. - The returned data is 77 bytes in size. - This file is readonly. + Before reading this file, control has to be written to select + which profile to read. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings @@ -68,19 +55,8 @@ Description: The mouse can store 5 profiles which can be switched by the The mouse will reject invalid data. Which profile to write is determined by the profile number contained in the data. - This file is writeonly. -Users: http://roccat.sourceforge.net - -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings -Date: August 2010 -Contact: Stefan Achatz <erazor_de@users.sourceforge.net> -Description: The mouse can store 5 profiles which can be switched by the - press of a button. A profile is split in settings and buttons. - profile_settings holds information like resolution, sensitivity - and light effects. - When read, these files return the respective profile settings. - The returned data is 43 bytes in size. - This file is readonly. + Before reading this file, control has to be written to select + which profile to read. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor @@ -104,9 +80,9 @@ What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid- Date: October 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When written a calibration process for the tracking control unit - can be initiated/cancelled. - The data has to be 3 bytes long. - This file is writeonly. + can be initiated/cancelled. Also lets one read/write sensor + registers. + The data has to be 4 bytes long. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus index 20f937c9d84f..a10404f15a54 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus @@ -1,12 +1,3 @@ -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_cpi -Date: January 2011 -Contact: Stefan Achatz <erazor_de@users.sourceforge.net> -Description: The integer value of this attribute ranges from 1-4. - When read, this attribute returns the number of the active - cpi level. - This file is readonly. -Users: http://roccat.sourceforge.net - What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_profile Date: January 2011 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> @@ -18,33 +9,12 @@ Description: The integer value of this attribute ranges from 0-4. active when the mouse is powered on. Users: http://roccat.sourceforge.net -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x -Date: January 2011 +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/info +Date: November 2012 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> -Description: The integer value of this attribute ranges from 1-10. - When read, this attribute returns the number of the actual - sensitivity in x direction. - This file is readonly. -Users: http://roccat.sourceforge.net - -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y -Date: January 2011 -Contact: Stefan Achatz <erazor_de@users.sourceforge.net> -Description: The integer value of this attribute ranges from 1-10. - When read, this attribute returns the number of the actual - sensitivity in y direction. - This file is readonly. -Users: http://roccat.sourceforge.net - -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version -Date: January 2011 -Contact: Stefan Achatz <erazor_de@users.sourceforge.net> -Description: When read, this file returns the raw integer version number of the - firmware reported by the mouse. Using the integer value eases - further usage in other programs. To receive the real version - number the decimal point has to be shifted 2 positions to the - left. E.g. a returned value of 121 means 1.21 - This file is readonly. +Description: When read, this file returns general data like firmware version. + When written, the device can be reset. + The data is 6 bytes long. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_buttons @@ -58,18 +28,8 @@ Description: The mouse can store 5 profiles which can be switched by the The mouse will reject invalid data. Which profile to write is determined by the profile number contained in the data. - This file is writeonly. -Users: http://roccat.sourceforge.net - -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons -Date: January 2011 -Contact: Stefan Achatz <erazor_de@users.sourceforge.net> -Description: The mouse can store 5 profiles which can be switched by the - press of a button. A profile is split in settings and buttons. - profile_buttons holds information about button layout. - When read, these files return the respective profile buttons. - The returned data is 23 bytes in size. - This file is readonly. + Before reading this file, control has to be written to select + which profile to read. Users: http://roccat.sourceforge.net What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_settings @@ -84,17 +44,6 @@ Description: The mouse can store 5 profiles which can be switched by the The mouse will reject invalid data. Which profile to write is determined by the profile number contained in the data. - This file is writeonly. -Users: http://roccat.sourceforge.net - -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings -Date: January 2011 -Contact: Stefan Achatz <erazor_de@users.sourceforge.net> -Description: The mouse can store 5 profiles which can be switched by the - press of a button. A profile is spli |