diff options
88 files changed, 4853 insertions, 883 deletions
diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt new file mode 100644 index 000000000000..8968371d84e2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt @@ -0,0 +1,35 @@ +Marvell Armada AP806 System Controller +====================================== + +The AP806 is one of the two core HW blocks of the Marvell Armada 7K/8K +SoCs. It contains a system controller, which provides a number +registers giving access to numerous features: clocks, pin-muxing and +many other SoC configuration items. This DT binding allows to describe +this system controller. + +The Device Tree node representing the AP806 system controller provides +a number of clocks: + + - 0: clock of CPU cluster 0 + - 1: clock of CPU cluster 1 + - 2: fixed PLL at 1200 Mhz + - 3: MSS clock, derived from the fixed PLL + +Required properties: + + - compatible: must be: + "marvell,ap806-system-controller", "syscon" + - reg: register area of the AP806 system controller + - #clock-cells: must be set to 1 + - clock-output-names: must be defined to: + "ap-cpu-cluster-0", "ap-cpu-cluster-1", "ap-fixed", "ap-mss" + +Example: + + syscon: system-controller@6f4000 { + compatible = "marvell,ap806-system-controller", "syscon"; + #clock-cells = <1>; + clock-output-names = "ap-cpu-cluster-0", "ap-cpu-cluster-1", + "ap-fixed", "ap-mss"; + reg = <0x6f4000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/clock/artpec6.txt b/Documentation/devicetree/bindings/clock/artpec6.txt new file mode 100644 index 000000000000..dff9cdf0009c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/artpec6.txt @@ -0,0 +1,41 @@ +* Clock bindings for Axis ARTPEC-6 chip + +The bindings are based on the clock provider binding in +Documentation/devicetree/bindings/clock/clock-bindings.txt + +External clocks: +---------------- + +There are two external inputs to the main clock controller which should be +provided using the common clock bindings. +- "sys_refclk": External 50 Mhz oscillator (required) +- "i2s_refclk": Alternate audio reference clock (optional). + +Main clock controller +--------------------- + +Required properties: +- #clock-cells: Should be <1> + See dt-bindings/clock/axis,artpec6-clkctrl.h for the list of valid identifiers. +- compatible: Should be "axis,artpec6-clkctrl" +- reg: Must contain the base address and length of the system controller +- clocks: Must contain a phandle entry for each clock in clock-names +- clock-names: Must include the external oscillator ("sys_refclk"). Optional + ones are the audio reference clock ("i2s_refclk") and the audio fractional + dividers ("frac_clk0" and "frac_clk1"). + +Examples: + +ext_clk: ext_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; +}; + +clkctrl: clkctrl@f8000000 { + #clock-cells = <1>; + compatible = "axis,artpec6-clkctrl"; + reg = <0xf8000000 0x48>; + clocks = <&ext_clk>; + clock-names = "sys_refclk"; +}; diff --git a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt new file mode 100644 index 000000000000..208cca6ac4ec --- /dev/null +++ b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt @@ -0,0 +1,35 @@ +Oxford Semiconductor OXNAS SoC Family Standard Clocks +================================================ + +Please also refer to clock-bindings.txt in this directory for common clock +bindings usage. + +Required properties: +- compatible: Should be "oxsemi,ox810se-stdclk" +- #clock-cells: 1, see below + +Parent node should have the following properties : +- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" + +For OX810SE, the clock indices are : + - 0: LEON + - 1: DMA_SGDMA + - 2: CIPHER + - 3: SATA + - 4: AUDIO + - 5: USBMPH + - 6: ETHA + - 7: PCIA + - 8: NAND + +example: + +sys: sys-ctrl@000000 { + compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; + reg = <0x000000 0x100000>; + + stdclk: stdclk { + compatible = "oxsemi,ox810se-stdclk"; + #clock-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt new file mode 100644 index 000000000000..3888dd33fcbd --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt @@ -0,0 +1,62 @@ +* Rockchip RK3399 Clock and Reset Unit + +The RK3399 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: PMU for CRU should be "rockchip,rk3399-pmucru" +- compatible: CRU should be "rockchip,rk3399-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "clkin_gmac" - external GMAC clock - optional, + - "clkin_i2s" - external I2S clock - optional, + - "pclkin_cif" - external ISP clock - optional, + - "clk_usbphy0_480m" - output clock of the pll in the usbphy0 + - "clk_usbphy1_480m" - output clock of the pll in the usbphy1 + +Example: Clock controller node: + + pmucru: pmu-clock-controller@ff750000 { + compatible = "rockchip,rk3399-pmucru"; + reg = <0x0 0xff750000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3399-cru"; + reg = <0x0 0xff760000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@ff1a0000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff180000 0x0 0x100>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 03e00c7c88eb..05aeee0aab4c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -973,7 +973,7 @@ S: Maintained L: linux-arm-kernel@axis.com F: arch/arm/mach-artpec F: arch/arm/boot/dts/artpec6* -F: drivers/clk/clk-artpec6.c +F: drivers/clk/axis ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT M: Nicolas Ferre <nicolas.ferre@atmel.com> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 16f7d33421d8..2dd371deb23b 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -197,10 +197,17 @@ config COMMON_CLK_PXA ---help--- Support for the Marvell PXA SoC. +config COMMON_CLK_OXNAS + bool "Clock driver for the OXNAS SoC Family" + select MFD_SYSCON + ---help--- + Support for the OXNAS SoC Family clocks. + source "drivers/clk/bcm/Kconfig" source "drivers/clk/hisilicon/Kconfig" source "drivers/clk/mvebu/Kconfig" source "drivers/clk/qcom/Kconfig" +source "drivers/clk/renesas/Kconfig" source "drivers/clk/samsung/Kconfig" source "drivers/clk/tegra/Kconfig" source "drivers/clk/ti/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 46869d696e4d..4ef71a13ab37 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_ARCH_MB86S7X) += clk-mb86s7x.o obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o +obj-$(CONFIG_COMMON_CLK_OXNAS) += clk-oxnas.o obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o @@ -51,6 +52,7 @@ obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o obj-$(CONFIG_COMMON_CLK_AT91) += at91/ +obj-$(CONFIG_ARCH_ARTPEC) += axis/ obj-y += bcm/ obj-$(CONFIG_ARCH_BERLIN) += berlin/ obj-$(CONFIG_ARCH_HISI) += hisilicon/ @@ -61,7 +63,7 @@ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ endif -obj-$(CONFIG_PLAT_ORION) += mvebu/ +obj-y += mvebu/ obj-$(CONFIG_ARCH_MESON) += meson/ obj-$(CONFIG_ARCH_MXS) += mxs/ obj-$(CONFIG_MACH_PISTACHIO) += pistachio/ diff --git a/drivers/clk/at91/clk-h32mx.c b/drivers/clk/at91/clk-h32mx.c index 819f5842fa66..8e20c8a76db7 100644 --- a/drivers/clk/at91/clk-h32mx.c +++ b/drivers/clk/at91/clk-h32mx.c @@ -114,7 +114,7 @@ static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np) h32mxclk->regmap = regmap; clk = clk_register(NULL, &h32mxclk->hw); - if (!clk) { + if (IS_ERR(clk)) { kfree(h32mxclk); return; } diff --git a/drivers/clk/axis/Makefile b/drivers/clk/axis/Makefile new file mode 100644 index 000000000000..628c9d3b9a02 --- /dev/null +++ b/drivers/clk/axis/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MACH_ARTPEC6) += clk-artpec6.o diff --git a/drivers/clk/axis/clk-artpec6.c b/drivers/clk/axis/clk-artpec6.c new file mode 100644 index 000000000000..ffc988b098e4 --- /dev/null +++ b/drivers/clk/axis/clk-artpec6.c @@ -0,0 +1,242 @@ +/* + * ARTPEC-6 clock initialization + * + * Copyright 2015-2016 Axis Comunications AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <dt-bindings/clock/axis,artpec6-clkctrl.h> + +#define NUM_I2S_CLOCKS 2 + +struct artpec6_clkctrl_drvdata { + struct clk *clk_table[ARTPEC6_CLK_NUMCLOCKS]; + void __iomem *syscon_base; + struct clk_onecell_data clk_data; + spinlock_t i2scfg_lock; +}; + +static struct artpec6_clkctrl_drvdata *clkdata; + +static const char *const i2s_clk_names[NUM_I2S_CLOCKS] = { + "i2s0", + "i2s1", +}; + +static const int i2s_clk_indexes[NUM_I2S_CLOCKS] = { + ARTPEC6_CLK_I2S0_CLK, + ARTPEC6_CLK_I2S1_CLK, +}; + +static void of_artpec6_clkctrl_setup(struct device_node *np) +{ + int i; + const char *sys_refclk_name; + u32 pll_mode, pll_m, pll_n; + struct clk **clks; + + /* Mandatory parent clock. */ + i = of_property_match_string(np, "clock-names", "sys_refclk"); + if (i < 0) + return; + + sys_refclk_name = of_clk_get_parent_name(np, i); + + clkdata = kzalloc(sizeof(*clkdata), GFP_KERNEL); + if (!clkdata) + return; + + clks = clkdata->clk_ta |