summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/boot/dts/armada-370-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78230.dtsi14
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78260.dtsi21
-rw-r--r--arch/arm/boot/dts/armada-xp-mv78460.dtsi21
-rw-r--r--arch/arm/boot/dts/dove-cubox.dts14
-rw-r--r--arch/arm/boot/dts/kirkwood-ns2-common.dtsi16
-rw-r--r--arch/arm/boot/dts/sunxi.dtsi6
-rw-r--r--arch/arm/kernel/debug.S2
-rw-r--r--arch/arm/mach-imx/Kconfig1
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c3
-rw-r--r--arch/arm/mach-imx/common.h1
-rw-r--r--arch/arm/mach-imx/devices/platform-imx-fb.c2
-rw-r--r--arch/arm/mach-imx/hotplug.c10
-rw-r--r--arch/arm/mach-imx/platsmp.c1
-rw-r--r--arch/arm/mach-imx/pm-imx6q.c1
-rw-r--r--arch/arm/mach-integrator/pci_v3.c14
-rw-r--r--arch/arm/mach-kirkwood/board-ns2.c38
-rw-r--r--arch/arm/mach-mvebu/Makefile2
-rw-r--r--drivers/video/imxfb.c3
19 files changed, 87 insertions, 85 deletions
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 00044026ef1f..9b82facb2561 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -26,7 +26,7 @@
memory {
device_type = "memory";
- reg = <0x00000000 0x20000000>; /* 512 MB */
+ reg = <0x00000000 0x40000000>; /* 1 GB */
};
soc {
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 271855a6e224..e041f42ed711 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -50,27 +50,25 @@
};
gpio0: gpio@d0018100 {
- compatible = "marvell,armadaxp-gpio";
- reg = <0xd0018100 0x40>,
- <0xd0018800 0x30>;
+ compatible = "marvell,orion-gpio";
+ reg = <0xd0018100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
- interrupts = <16>, <17>, <18>, <19>;
+ interrupts = <82>, <83>, <84>, <85>;
};
gpio1: gpio@d0018140 {
- compatible = "marvell,armadaxp-gpio";
- reg = <0xd0018140 0x40>,
- <0xd0018840 0x30>;
+ compatible = "marvell,orion-gpio";
+ reg = <0xd0018140 0x40>;
ngpios = <17>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
- interrupts = <20>, <21>, <22>;
+ interrupts = <87>, <88>, <89>;
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 1c1937dbce73..9e23bd8c9536 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -51,39 +51,36 @@
};
gpio0: gpio@d0018100 {
- compatible = "marvell,armadaxp-gpio";
- reg = <0xd0018100 0x40>,
- <0xd0018800 0x30>;
+ compatible = "marvell,orion-gpio";
+ reg = <0xd0018100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
- interrupts = <16>, <17>, <18>, <19>;
+ interrupts = <82>, <83>, <84>, <85>;
};
gpio1: gpio@d0018140 {
- compatible = "marvell,armadaxp-gpio";
- reg = <0xd0018140 0x40>,
- <0xd0018840 0x30>;
+ compatible = "marvell,orion-gpio";
+ reg = <0xd0018140 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
- interrupts = <20>, <21>, <22>, <23>;
+ interrupts = <87>, <88>, <89>, <90>;
};
gpio2: gpio@d0018180 {
- compatible = "marvell,armadaxp-gpio";
- reg = <0xd0018180 0x40>,
- <0xd0018870 0x30>;
+ compatible = "marvell,orion-gpio";
+ reg = <0xd0018180 0x40>;
ngpios = <3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
- interrupts = <24>;
+ interrupts = <91>;
};
ethernet@d0034000 {
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 4905cf3a5ef8..965966110e38 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -66,39 +66,36 @@
};
gpio0: gpio@d0018100 {
- compatible = "marvell,armadaxp-gpio";
- reg = <0xd0018100 0x40>,
- <0xd0018800 0x30>;
+ compatible = "marvell,orion-gpio";
+ reg = <0xd0018100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
- interrupts = <16>, <17>, <18>, <19>;
+ interrupts = <82>, <83>, <84>, <85>;
};
gpio1: gpio@d0018140 {
- compatible = "marvell,armadaxp-gpio";
- reg = <0xd0018140 0x40>,
- <0xd0018840 0x30>;
+ compatible = "marvell,orion-gpio";
+ reg = <0xd0018140 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
- interrupts = <20>, <21>, <22>, <23>;
+ interrupts = <87>, <88>, <89>, <90>;
};
gpio2: gpio@d0018180 {
- compatible = "marvell,armadaxp-gpio";
- reg = <0xd0018180 0x40>,
- <0xd0018870 0x30>;
+ compatible = "marvell,orion-gpio";
+ reg = <0xd0018180 0x40>;
ngpios = <3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupts-cells = <2>;
- interrupts = <24>;
+ interrupts = <91>;
};
ethernet@d0034000 {
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index fed7d3f9f431..cdee96fca6e2 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -26,10 +26,15 @@
};
&uart0 { status = "okay"; };
-&sdio0 { status = "okay"; };
&sata0 { status = "okay"; };
&i2c0 { status = "okay"; };
+&sdio0 {
+ status = "okay";
+ /* sdio0 card detect is connected to wrong pin on CuBox */
+ cd-gpios = <&gpio0 12 1>;
+};
+
&spi0 {
status = "okay";
@@ -42,9 +47,14 @@
};
&pinctrl {
- pinctrl-0 = <&pmx_gpio_18>;
+ pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>;
pinctrl-names = "default";
+ pmx_gpio_12: pmx-gpio-12 {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
pmx_gpio_18: pmx-gpio-18 {
marvell,pins = "mpp18";
marvell,function = "gpio";
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 9bc6785ad228..77d21abfcdf7 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -1,4 +1,5 @@
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
chosen {
@@ -6,6 +7,21 @@
};
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0
+ &pmx_ns2_sata0 &pmx_ns2_sata1>;
+ pinctrl-names = "default";
+
+ pmx_ns2_sata0: pmx-ns2-sata0 {
+ marvell,pins = "mpp21";
+ marvell,function = "sata0";
+ };
+ pmx_ns2_sata1: pmx-ns2-sata1 {
+ marvell,pins = "mpp20";
+ marvell,function = "sata1";
+ };
+ };
+
serial@12000 {
clock-frequency = <166666667>;
status = "okay";
diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi
index 8bbc2bfef221..8b36abea9f2e 100644
--- a/arch/arm/boot/dts/sunxi.dtsi
+++ b/arch/arm/boot/dts/sunxi.dtsi
@@ -60,19 +60,21 @@
};
uart0: uart@01c28000 {
- compatible = "ns8250";
+ compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <1>;
reg-shift = <2>;
+ reg-io-width = <4>;
clock-frequency = <24000000>;
status = "disabled";
};
uart1: uart@01c28400 {
- compatible = "ns8250";
+ compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <2>;
reg-shift = <2>;
+ reg-io-width = <4>;
clock-frequency = <24000000>;
status = "disabled";
};
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 6809200c31fb..14f7c3b14632 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -100,12 +100,14 @@ ENTRY(printch)
b 1b
ENDPROC(printch)
+#ifdef CONFIG_MMU
ENTRY(debug_ll_addr)
addruart r2, r3, ip
str r2, [r0]
str r3, [r1]
mov pc, lr
ENDPROC(debug_ll_addr)
+#endif
#else
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 3e628fd7a674..0a2349dc7018 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -851,6 +851,7 @@ config SOC_IMX6Q
select HAVE_CAN_FLEXCAN if CAN
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
+ select HAVE_IMX_SRC
select HAVE_SMP
select MFD_SYSCON
select PINCTRL
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 7f2c10c7413a..c0c4e723b7f5 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void)
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
+ /* Set initial power mode */
+ imx6q_set_lpm(WAIT_CLOCKED);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 7191ab4434e5..fa36fb84ab19 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_clock_map_io(void);
extern void imx_cpu_die(unsigned int cpu);
+extern int imx_cpu_kill(unsigned int cpu);
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);
diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
index 10b0ed39f07f..25a47c616b2d 100644
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c
@@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb(
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device_dmamask("imx-fb", 0,
+ return imx_add_platform_device_dmamask(data->devid, 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 3dec962b0770..7bc5fe15dda2 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void)
void imx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
- imx_enable_cpu(cpu, false);
+ cpu_do_idle();
+}
- /* spin here until hardware takes it down */
- while (1)
- ;
+int imx_cpu_kill(unsigned int cpu)
+{
+ imx_enable_cpu(cpu, false);
+ return 1;
}
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 3777b805b76b..66fae885c842 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -92,5 +92,6 @@ struct smp_operations imx_smp_ops __initdata = {
.smp_boot_secondary = imx_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = imx_cpu_die,
+ .cpu_kill = imx_cpu_kill,
#endif
};
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index a17543da602d..ee42d20cba19 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state)
cpu_suspend(0, imx6q_suspend_finish);
imx_smp_prepare();
imx_gpc_post_resume();
+ imx6q_set_lpm(WAIT_CLOCKED);
break;
default:
return -EINVAL;
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index be50e795536d..e7fcea7f3300 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
{
int ret = 0;
+ if (!ap_syscon_base)
+ return -EINVAL;
+
if (nr == 0) {
sys->mem_offset = PHYS_PCI_MEM_BASE;
ret = pci_v3_setup_resources(sys);
- /* Remap the Integrator system controller */
- ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
- if (!ap_syscon_base)
- return -EINVAL;
}
return ret;
@@ -497,6 +496,13 @@ void __init pci_v3_preinit(void)
unsigned int temp;
int ret;
+ /* Remap the Integrator system controller */
+ ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
+ if (!ap_syscon_base) {
+ pr_err("unable to remap the AP syscon for PCIv3\n");
+ return;
+ }
+
pcibios_min_mem = 0x00100000;
/*
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index 8821720ab5a4..f4632a809f68 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -18,47 +18,11 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data ns2_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int ns2_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Fan speed (bit 1) */
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP12_GPO, /* Red led */
- MPP14_GPIO, /* USB fuse */
- MPP16_GPIO, /* SATA 0 power */
- MPP17_GPIO, /* SATA 1 power */
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP20_SATA1_ACTn,
- MPP21_SATA0_ACTn,
- MPP22_GPIO, /* Fan speed (bit 0) */
- MPP23_GPIO, /* Fan power */
- MPP24_GPIO, /* USB mode select */
- MPP25_GPIO, /* Fan rotation fail */
- MPP26_GPIO, /* USB device vbus */
- MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* Blue led (slow register) */
- MPP30_GPIO, /* Blue led (command register) */
- MPP31_GPIO, /* Board power off */
- MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
- MPP33_GPO, /* Fan speed (bit 2) */
- 0
-};
-
#define NS2_GPIO_POWER_OFF 31
static void ns2_power_off(void)
@@ -71,8 +35,6 @@ void __init ns2_init(void)
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(ns2_mpp_config);
-
if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 5dcb369b58aa..99df4df680fd 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,6 +1,8 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-orion/include
+AFLAGS_coherency_ll.o := -Wa,-march=armv7-a
+
obj-y += system-controller.o
obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 12526787a7c7..600f6f9987cc 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -729,6 +729,8 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev)
memset(fbi, 0, sizeof(struct imxfb_info));
+ fbi->devtype = pdev->id_entry->driver_data;
+
strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id));
info->fix.type = FB_TYPE_PACKED_PIXELS;
@@ -789,7 +791,6 @@ static int __init imxfb_probe(struct platform_device *pdev)
return -ENOMEM;
fbi = info->par;
- fbi->devtype = pdev->id_entry->driver_data;
if (!fb_mode)
fb_mode = pdata->mode[0].mode.name;