diff options
79 files changed, 6863 insertions, 2191 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt new file mode 100644 index 000000000000..5f3719ab7075 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt @@ -0,0 +1,179 @@ +System Control and Management Interface (SCMI) Message Protocol +---------------------------------------------------------- + +The SCMI is intended to allow agents such as OSPM to manage various functions +that are provided by the hardware platform it is running on, including power +and performance functions. + +This binding is intended to define the interface the firmware implementing +the SCMI as described in ARM document number ARM DUI 0922B ("ARM System Control +and Management Interface Platform Design Document")[0] provide for OSPM in +the device tree. + +Required properties: + +The scmi node with the following properties shall be under the /firmware/ node. + +- compatible : shall be "arm,scmi" +- mboxes: List of phandle and mailbox channel specifiers. It should contain + exactly one or two mailboxes, one for transmitting messages("tx") + and another optional for receiving the notifications("rx") if + supported. +- shmem : List of phandle pointing to the shared memory(SHM) area as per + generic mailbox client binding. +- #address-cells : should be '1' if the device has sub-nodes, maps to + protocol identifier for a given sub-node. +- #size-cells : should be '0' as 'reg' property doesn't have any size + associated with it. + +Optional properties: + +- mbox-names: shall be "tx" or "rx" depending on mboxes entries. + +See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details +about the generic mailbox controller and client driver bindings. + +The mailbox is the only permitted method of calling the SCMI firmware. +Mailbox doorbell is used as a mechanism to alert the presence of a +messages and/or notification. + +Each protocol supported shall have a sub-node with corresponding compatible +as described in the following sections. If the platform supports dedicated +communication channel for a particular protocol, the 3 properties namely: +mboxes, mbox-names and shmem shall be present in the sub-node corresponding +to that protocol. + +Clock/Performance bindings for the clocks/OPPs based on SCMI Message Protocol +------------------------------------------------------------ + +This binding uses the common clock binding[1]. + +Required properties: +- #clock-cells : Should be 1. Contains the Clock ID value used by SCMI commands. + +Power domain bindings for the power domains based on SCMI Message Protocol +------------------------------------------------------------ + +This binding for the SCMI power domain providers uses the generic power +domain binding[2]. + +Required properties: + - #power-domain-cells : Should be 1. Contains the device or the power + domain ID value used by SCMI commands. + +Sensor bindings for the sensors based on SCMI Message Protocol +-------------------------------------------------------------- +SCMI provides an API to access the various sensors on the SoC. + +Required properties: +- #thermal-sensor-cells: should be set to 1. This property follows the + thermal device tree bindings[3]. + + Valid cell values are raw identifiers (Sensor ID) + as used by the firmware. Refer to platform details + for your implementation for the IDs to use. + +SRAM and Shared Memory for SCMI +------------------------------- + +A small area of SRAM is reserved for SCMI communication between application +processors and SCP. + +The properties should follow the generic mmio-sram description found in [4] + +Each sub-node represents the reserved area for SCMI. + +Required sub-node properties: +- reg : The base offset and size of the reserved area with the SRAM +- compatible : should be "arm,scmi-shmem" for Non-secure SRAM based + shared memory + +[0] http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/index.html +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/power/power_domain.txt +[3] Documentation/devicetree/bindings/thermal/thermal.txt +[4] Documentation/devicetree/bindings/sram/sram.txt + +Example: + +sram@50000000 { + compatible = "mmio-sram"; + reg = <0x0 0x50000000 0x0 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x50000000 0x10000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "arm,scmi-shmem"; + reg = <0x200 0x200>; + }; +}; + +mailbox@40000000 { + .... + #mbox-cells = <1>; + reg = <0x0 0x40000000 0x0 0x10000>; +}; + +firmware { + + ... + + scmi { + compatible = "arm,scmi"; + mboxes = <&mailbox 0 &mailbox 1>; + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri &cpu_scp_hpri>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_devpd: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + }; + + scmi_dvfs: protocol@13 { + reg = <0x13>; + #clock-cells = <1>; + }; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_sensors0: protocol@15 { + reg = <0x15>; + #thermal-sensor-cells = <1>; + }; + }; +}; + +cpu@0 { + ... + reg = <0 0>; + clocks = <&scmi_dvfs 0>; +}; + +hdlcd@7ff60000 { + ... + reg = <0 0x7ff60000 0 0x1000>; + clocks = <&scmi_clk 4>; + power-domains = <&scmi_devpd 1>; +}; + +thermal-zones { + soc_thermal { + polling-delay-passive = <100>; + polling-delay = <1000>; + /* sensor ID */ + thermal-sensors = <&scmi_sensors0 3>; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index 779f5614bcee..16685787d2bd 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -43,6 +43,12 @@ following properties: - interrupt-parent: a phandle indicating which interrupt controller this PMU signals interrupts to. + +Optional nodes: + +- nodes defining the restart and poweroff syscon children + + Example : pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5250-pmu", "syscon"; diff --git a/Documentation/devicetree/bindings/mailbox/mailbox.txt b/Documentation/devicetree/bindings/mailbox/mailbox.txt index be05b9746c69..af8ecee2ac68 100644 --- a/Documentation/devicetree/bindings/mailbox/mailbox.txt +++ b/Documentation/devicetree/bindings/mailbox/mailbox.txt @@ -23,6 +23,11 @@ Required property: Optional property: - mbox-names: List of identifier strings for each mailbox channel. +- shmem : List of phandle pointing to the shared memory(SHM) area between the + users of these mailboxes for IPC, one for each mailbox. This shared + memory can be part of any memory reserved for the purpose of this + communication between the mailbox client and the remote. + Example: pwr_cntrl: power { @@ -30,3 +35,26 @@ Example: mbox-names = "pwr-ctrl", "rpc"; mboxes = <&mailbox 0 &mailbox 1>; }; + +Example with shared memory(shmem): + + sram: sram@50000000 { + compatible = "mmio-sram"; + reg = <0x50000000 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x10000>; + + cl_shmem: shmem@0 { + compatible = "client-shmem"; + reg = <0x0 0x200>; + }; + }; + + client@2e000000 { + ... + mboxes = <&mailbox 0>; + shmem = <&cl_shmem>; + .. + }; diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt index 69aadee00d5f..34dd89087cff 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt @@ -176,3 +176,24 @@ lhc: lhc@20 { compatible = "aspeed,ast2500-lhc"; reg = <0x20 0x24 0x48 0x8>; }; + +LPC reset control +----------------- + +The UARTs present in the ASPEED SoC can have their resets tied to the reset +state of the LPC bus. Some systems may chose to modify this configuration. + +Required properties: + + - compatible: "aspeed,ast2500-lpc-reset" or + "aspeed,ast2400-lpc-reset" + - reg: offset and length of the IP in the LHC memory region + - #reset-controller indicates the number of reset cells expected + +Example: + +lpc_reset: reset-controller@18 { + compatible = "aspeed,ast2500-lpc-reset"; + reg = <0x18 0x4>; + #reset-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/ccn.txt b/Documentation/devicetree/bindings/perf/arm-ccn.txt index 43b5a71a5a9d..43b5a71a5a9d 100644 --- a/Documentation/devicetree/bindings/arm/ccn.txt +++ b/Documentation/devicetree/bindings/perf/arm-ccn.txt diff --git a/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt new file mode 100644 index 000000000000..b4edaf7c7ff3 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt @@ -0,0 +1,6 @@ +STMicroelectronics STM32MP1 Peripheral Reset Controller +======================================================= + +The RCC IP is both a reset and a clock controller. + +Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt index 76bf45b893fa..d6fe16f094af 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt @@ -21,6 +21,8 @@ Required properties: - "mediatek,mt2712-scpsys" - "mediatek,mt6797-scpsys" - "mediatek,mt7622-scpsys" + - "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys": For MT7623 SoC + - "mediatek,mt7623a-scpsys": For MT7623A SoC - "mediatek,mt8173-scpsys" - #power-domain-cells: Must be 1 - reg: Address range of the SCPSYS unit @@ -28,10 +30,11 @@ Required properties: - clock, clock-names: clocks according to the common clock binding. These are clocks which hardware needs to be enabled before enabling certain power domains. - Required clocks for MT2701: "mm", "mfg", "ethif" + Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif" Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec" Required clocks for MT6797: "mm", "mfg", "vdec" Required clocks for MT7622: "hif_sel" + Required clocks for MT7622A: "ethif" Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt" Optional properties: diff --git a/Documentation/arm/CCN.txt b/Documentation/perf/arm-ccn.txt index 15cdb7bc57c3..15cdb7bc57c3 100644 --- a/Documentation/arm/CCN.txt +++ b/Documentation/perf/arm-ccn.txt diff --git a/MAINTAINERS b/MAINTAINERS index 2f983928d74c..c6973001bf3c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13491,15 +13491,16 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git S: Supported F: drivers/mfd/syscon.c -SYSTEM CONTROL & POWER INTERFACE (SCPI) Message Protocol drivers +SYSTEM CONTROL & POWER/MANAGEMENT INTERFACE (SCPI/SCMI) Message Protocol drivers M: Sudeep Holla <sudeep.holla@arm.com> L: linux-arm-kernel@lists.infradead.org S: Maintained -F: Documentation/devicetree/bindings/arm/arm,scpi.txt -F: drivers/clk/clk-scpi.c -F: drivers/cpufreq/scpi-cpufreq.c +F: Documentation/devicetree/bindings/arm/arm,sc[mp]i.txt +F: drivers/clk/clk-sc[mp]i.c +F: drivers/cpufreq/sc[mp]i-cpufreq.c F: drivers/firmware/arm_scpi.c -F: include/linux/scpi_protocol.h +F: drivers/firmware/arm_scmi/ +F: include/linux/sc[mp]i_protocol.h SYSTEM RESET/SHUTDOWN DRIVERS M: Sebastian Reichel <sre@kernel.org> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 769599bc1bab..ff70850031c5 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -8,25 +8,10 @@ menu "Bus devices" config ARM_CCI bool -config ARM_CCI_PMU - bool - select ARM_CCI - config ARM_CCI400_COMMON bool select ARM_CCI -config ARM_CCI400_PMU - bool "ARM CCI400 PMU support" - depends on (ARM && CPU_V7) || ARM64 - depends on PERF_EVENTS - select ARM_CCI400_COMMON - select ARM_CCI_PMU - help - Support for PMU events monitoring on the ARM CCI-400 (cache coherent - interconnect). CCI-400 supports counting events related to the - connected slave/master interfaces. - config ARM_CCI400_PORT_CTRL bool depends on ARM && OF && CPU_V7 @@ -35,27 +20,6 @@ config ARM_CCI400_PORT_CTRL Low level power management driver for CCI400 cache coherent interconnect for ARM platforms. -config ARM_CCI5xx_PMU - bool "ARM CCI-500/CCI-550 PMU support" - depends on (ARM && CPU_V7) || ARM64 - depends on PERF_EVENTS - select ARM_CCI_PMU - help - Support for PMU events monitoring on the ARM CCI-500/CCI-550 cache - coherent interconnects. Both of them provide 8 independent event counters, - which can count events pertaining to the slave/master interfaces as well - as the internal events to the CCI. - - If unsure, say Y - -config ARM_CCN - tristate "ARM CCN driver support" - depends on ARM || ARM64 - depends on PERF_EVENTS - help - PMU (perf) driver supporting the ARM CCN (Cache Coherent Network)< |