diff options
59 files changed, 353 insertions, 457 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 482ba91e73a7..bfd7c69c85a5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -932,32 +932,24 @@ config ARCH_DAVINCI help Support for TI's DaVinci platform. -config ARCH_OMAP - bool "TI OMAP" +config ARCH_OMAP1 + bool "TI OMAP1" depends on MMU select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB - select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS - select HAVE_CLK - help - Support for TI's OMAP platform (OMAP1/2/3/4). - -config ARCH_VT8500_SINGLE - bool "VIA/WonderMedia 85xx" - select ARCH_HAS_CPUFREQ + select ARCH_OMAP select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP - select COMMON_CLK - select CPU_ARM926T + select CLKSRC_MMIO select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP select HAVE_CLK - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - select USE_OF + select HAVE_IDE + select IRQ_DOMAIN + select NEED_MACH_IO_H if PCCARD + select NEED_MACH_MEMORY_H help - Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. + Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) endchoice diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index ad375a51a7d2..5f0cdf28c227 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -291,6 +291,13 @@ choice Say Y here if you want kernel low-level debugging support on MVEBU based platforms. + config DEBUG_OMAP2PLUS_UART + bool "Kernel low-level debugging messages via OMAP2PLUS UART" + depends on ARCH_OMAP2PLUS + help + Say Y here if you want kernel low-level debugging support + on OMAP2PLUS based platforms. + config DEBUG_PICOXCELL_UART depends on ARCH_PICOXCELL bool "Use PicoXcell UART for low-level debug" @@ -412,6 +419,13 @@ choice of the tiles using the RS1 memory map, including all new A-class core tiles, FPGA-based SMMs and software models. + config DEBUG_VT8500_UART0 + bool "Use UART0 on VIA/Wondermedia SoCs" + depends on ARCH_VT8500 + help + This option selects UART0 on VIA/Wondermedia System-on-a-chip + devices, including VT8500, WM8505, WM8650 and WM8850. + config DEBUG_LL_UART_NONE bool "No low-level debugging UART" depends on !ARCH_MULTIPLATFORM @@ -461,6 +475,54 @@ config DEBUG_IMX6Q_UART_PORT choice prompt "Low-level debug console UART" + depends on DEBUG_OMAP2PLUS_UART + + config DEBUG_OMAP2UART1 + bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" + help + This covers at least h4, 2430sdp, 3430sdp, 3630sdp, + omap3 torpedo and 3530 lv som. + + config DEBUG_OMAP2UART2 + bool "OMAP2/3/4 UART2" + + config DEBUG_OMAP2UART3 + bool "OMAP2 UART3 (n8x0)" + + config DEBUG_OMAP3UART3 + bool "OMAP3 UART3 (most omap3 boards)" + help + This covers at least cm_t3x, beagle, crane, devkit8000, + igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, + and 3517evm. + + config DEBUG_OMAP4UART3 + bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" + + config DEBUG_OMAP3UART4 + bool "OMAP36XX UART4" + + config DEBUG_OMAP4UART4 + bool "OMAP4/5 UART4" + + config DEBUG_TI81XXUART1 + bool "TI81XX UART1 (ti8148evm)" + + config DEBUG_TI81XXUART2 + bool "TI81XX UART2" + + config DEBUG_TI81XXUART3 + bool "TI81XX UART3 (ti8168evm)" + + config DEBUG_AM33XXUART1 + bool "AM33XX UART1" + + config DEBUG_ZOOM_UART + bool "Zoom2/3 UART" +endchoice + +choice + prompt "Low-level debug console UART" depends on DEBUG_LL && DEBUG_TEGRA_UART config TEGRA_DEBUG_UART_AUTO_ODMDATA @@ -501,11 +563,13 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6Q_UART default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART + default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART default "debug/socfpga.S" if DEBUG_SOCFPGA_UART default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 + default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 2eeff1e64b6e..e31d442343c8 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -8,6 +8,7 @@ CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_SOCFPGA=y CONFIG_ARCH_SUNXI=y # CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set +CONFIG_ARCH_ZYNQ=y CONFIG_ARM_ERRATA_754322=y CONFIG_SMP=y CONFIG_ARM_ARCH_TIMER=y @@ -39,7 +40,6 @@ CONFIG_I2C=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_SPI=y CONFIG_SPI_PL022=y -CONFIG_GPIOLIB=y CONFIG_FB=y CONFIG_FB_ARMCLCD=y CONFIG_FRAMEBUFFER_CONSOLE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 82ce8d738fa1..5be2e4be802c 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -20,9 +20,10 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y +CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y +CONFIG_ARCH_VEXPRESS_CA9X4=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y CONFIG_NO_HZ=y @@ -121,6 +122,8 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y @@ -194,6 +197,7 @@ CONFIG_USB_ZERO=m CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=y +CONFIG_MMC_ARMMMCI=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_RTC_CLASS=y diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/include/debug/omap2plus.S index cfaed13d0040..6d867aef18eb 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/include/debug/omap2plus.S @@ -1,5 +1,4 @@ -/* arch/arm/mach-omap2/include/mach/debug-macro.S - * +/* * Debugging macro include header * * Copyright (C) 1994-1999 Russell King @@ -13,7 +12,49 @@ #include <linux/serial_reg.h> -#include <mach/serial.h> +/* OMAP2 serial ports */ +#define OMAP2_UART1_BASE 0x4806a000 +#define OMAP2_UART2_BASE 0x4806c000 +#define OMAP2_UART3_BASE 0x4806e000 + +/* OMAP3 serial ports */ +#define OMAP3_UART1_BASE OMAP2_UART1_BASE +#define OMAP3_UART2_BASE OMAP2_UART2_BASE +#define OMAP3_UART3_BASE 0x49020000 +#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ +#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ + +/* OMAP4 serial ports */ +#define OMAP4_UART1_BASE OMAP2_UART1_BASE +#define OMAP4_UART2_BASE OMAP2_UART2_BASE +#define OMAP4_UART3_BASE 0x48020000 +#define OMAP4_UART4_BASE 0x4806e000 + +/* TI81XX serial ports */ +#define TI81XX_UART1_BASE 0x48020000 +#define TI81XX_UART2_BASE 0x48022000 +#define TI81XX_UART3_BASE 0x48024000 + +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + +/* AM33XX serial port */ +#define AM33XX_UART1_BASE 0x44E09000 + +/* OMAP5 serial ports */ +#define OMAP5_UART1_BASE OMAP2_UART1_BASE +#define OMAP5_UART2_BASE OMAP2_UART2_BASE +#define OMAP5_UART3_BASE OMAP4_UART3_BASE +#define OMAP5_UART4_BASE OMAP4_UART4_BASE +#define OMAP5_UART5_BASE 0x48066000 +#define OMAP5_UART6_BASE 0x48068000 + +/* External port on Zoom2/3 */ +#define ZOOM_UART_BASE 0x10000000 +#define ZOOM_UART_VIRT 0xfa400000 + +#define OMAP_PORT_SHIFT 2 +#define ZOOM_PORT_SHIFT 1 #define UART_OFFSET(addr) ((addr) & 0x00ffffff) @@ -23,12 +64,6 @@ omap_uart_virt: .word 0 omap_uart_lsr: .word 0 .popsection - /* - * Note that this code won't work if the bootloader passes - * a wrong machine ID number in r1. To debug, just hardcode - * the desired UART phys and virt addresses temporarily into - * the omap_uart_phys and omap_uart_virt above. - */ .macro addruart, rp, rv, tmp /* Use omap_uart_phys/virt if already configured */ @@ -43,74 +78,64 @@ omap_uart_lsr: .word 0 cmpne \rv, #0 bne 100f @ already configured - /* Check the debug UART configuration set in uncompress.h */ - mov \rp, pc - ldr \rv, =OMAP_UART_INFO_OFS - and \rp, \rp, #0xff000000 - ldr \rp, [\rp, \rv] - - /* Select the UART to use based on the UART1 scratchpad value */ - cmp \rp, #0 @ no port configured? - beq 21f @ if none, try to use UART1 - cmp \rp, #OMAP2UART1 @ OMAP2/3/4UART1 - beq 21f @ configure OMAP2/3/4UART1 - cmp \rp, #OMAP2UART2 @ OMAP2/3/4UART2 - beq 22f @ configure OMAP2/3/4UART2 - cmp \rp, #OMAP2UART3 @ only on 24xx - beq 23f @ configure OMAP2UART3 - cmp \rp, #OMAP3UART3 @ only on 34xx - beq 33f @ configure OMAP3UART3 - cmp \rp, #OMAP4UART3 @ only on 44xx/54xx - beq 43f @ configure OMAP4/5UART3 - cmp \rp, #OMAP3UART4 @ only on 36xx - beq 34f @ configure OMAP3UART4 - cmp \rp, #OMAP4UART4 @ only on 44xx/54xx - beq 44f @ configure OMAP4/5UART4 - cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different - beq 81f @ configure UART1 - cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different - beq 82f @ configure UART2 - cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different - beq 83f @ configure UART3 - cmp \rp, #AM33XXUART1 @ AM33XX UART offsets different - beq 84f @ configure UART1 - cmp \rp, #ZOOM_UART @ only on zoom2/3 - beq 95f @ configure ZOOM_UART - /* Configure the UART offset from the phys/virt base */ -21: mov \rp, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4 +#ifdef CONFIG_DEBUG_OMAP2UART1 + mov \rp, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4 b 98f -22: mov \rp, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4 +#endif +#ifdef CONFIG_DEBUG_OMAP2UART2 + mov \rp, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4 b 98f -23: mov \rp, #UART_OFFSET(OMAP2_UART3_BASE) +#endif +#ifdef CONFIG_DEBUG_OMAP2UART3 + mov \rp, #UART_OFFSET(OMAP2_UART3_BASE) b 98f -33: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) +#endif +#ifdef CONFIG_DEBUG_OMAP3UART3 + mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) add \rp, \rp, #0x00fb0000 add \rp, \rp, #0x00006000 @ OMAP3_UART3_BASE b 98f -34: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) +#endif +#ifdef CONFIG_DEBUG_OMAP4UART3 + mov \rp, #UART_OFFSET(OMAP4_UART3_BASE) + b 98f +#endif +#ifdef CONFIG_DEBUG_OMAP3UART4 + mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) add \rp, \rp, #0x00fb0000 add \rp, \rp, #0x00028000 @ OMAP3_UART4_BASE b 98f -43: mov \rp, #UART_OFFSET(OMAP4_UART3_BASE) - b 98f -44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE) +#endif +#ifdef CONFIG_DEBUG_OMAP4UART4 + mov \rp, #UART_OFFSET(OMAP4_UART4_BASE) b 98f -81: mov \rp, #UART_OFFSET(TI81XX_UART1_BASE) +#endif +#ifdef CONFIG_DEBUG_TI81XXUART1 + mov \rp, #UART_OFFSET(TI81XX_UART1_BASE) b 98f -82: mov \rp, #UART_OFFSET(TI81XX_UART2_BASE) +#endif +#ifdef CONFIG_DEBUG_TI81XXUART2 + mov \rp, #UART_OFFSET(TI81XX_UART2_BASE) b 98f -83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE) +#endif +#ifdef CONFIG_DEBUG_TI81XXUART3 + mov \rp, #UART_OFFSET(TI81XX_UART3_BASE) b 98f -84: ldr \rp, =AM33XX_UART1_BASE +#endif +#ifdef CONFIG_DEBUG_AM33XXUART1 + ldr \rp, =AM33XX_UART1_BASE and \rp, \rp, #0x00ffffff b 97f -95: ldr \rp, =ZOOM_UART_BASE +#endif +#ifdef CONFIG_DEBUG_ZOOM_UART + ldr \rp, =ZOOM_UART_BASE str \rp, [\tmp, #0] @ omap_uart_phys ldr \rp, =ZOOM_UART_VIRT str \rp, [\tmp, #4] @ omap_uart_virt mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT) str \rp, [\tmp, #8] @ omap_uart_lsr +#endif b 10b /* AM33XX: Store both phys and virt address for the uart */ diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/include/debug/vt8500.S index ca292f29d4a3..0e0ca0869da7 100644 --- a/arch/arm/mach-vt8500/include/mach/debug-macro.S +++ b/arch/arm/include/debug/vt8500.S @@ -1,20 +1,24 @@ -/* - * arch/arm/mach-vt8500/include/mach/debug-macro.S +/* + * Debugging macro include header * * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * Debugging macro include header + * Moved from arch/arm/mach-vt8500/include/mach/debug-macro.S + * Minor changes for readability. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * -*/ + */ + +#define DEBUG_LL_PHYS_BASE 0xD8000000 +#define DEBUG_LL_VIRT_BASE 0xF8000000 +#define DEBUG_LL_UART_OFFSET 0x00200000 +#if defined(CONFIG_DEBUG_VT8500_UART0) .macro addruart, rp, rv, tmp - mov \rp, #0x00200000 - orr \rv, \rp, #0xf8000000 - orr \rp, \rp, #0xd8000000 + mov \rp, #DEBUG_LL_UART_OFFSET + orr \rv, \rp, #DEBUG_LL_VIRT_BASE + orr \rp, \rp, #DEBUG_LL_PHYS_BASE .endm .macro senduart,rd,rx @@ -29,3 +33,5 @@ .macro waituart,rd,rx .endm + +#endif diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index e190611e4b46..1a4e887f028d 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -24,7 +24,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/io.h> - +#include <linux/dma-mapping.h> #include <linux/omap-dma.h> #include <mach/tc.h> @@ -270,11 +270,17 @@ static u32 configure_dma_errata(void) return errata; } +static const struct platform_device_info omap_dma_dev_info = { + .name = "omap-dma-engine", + .id = -1, + .dma_mask = DMA_BIT_MASK(32), +}; + static int __init omap1_system_dma_init(void) { struct omap_system_dma_plat_info *p; struct omap_dma_dev_attr *d; - struct platform_device *pdev; + struct platform_device *pdev, *dma_pdev; int ret; pdev = platform_device_alloc("omap_dma_system", 0); @@ -380,8 +386,16 @@ static int __init omap1_system_dma_init(void) dma_common_ch_start = CPC; dma_common_ch_end = COLOR; + dma_pdev = platform_device_register_full(&omap_dma_dev_info); + if (IS_ERR(dma_pdev)) { + ret = PTR_ERR(dma_pdev); + goto exit_release_pdev; + } + return ret; +exit_release_pdev: + platform_device_del(pdev); exit_release_chan: kfree(d->chan); exit_release_d: diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index faca808cb3d9..7f5761cffd2e 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -91,3 +91,9 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, return platform_device_register(pdev); } + +static int __init omap_i2c_cmdline(void) +{ + return omap_register_i2c_bus_cmdline(); +} +subsys_initcall(omap_i2c_cmdline); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 41b581fd0213..c3c033f283a9 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -1,3 +1,26 @@ +config ARCH_OMAP + bool + +config ARCH_OMAP2PLUS + bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7) + select ARCH_HAS_CPUFREQ + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_OMAP + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select HAVE_CLK + select OMAP_DM_TIMER + select PINCTRL + select PROC_DEVICETREE if PROC_FS + select SPARSE_IRQ + select USE_OF + help + Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 + + if ARCH_OMAP2PLUS menu "TI OMAP2/3/4 Specific Features" @@ -397,7 +420,7 @@ config OMAP3_SDRC_AC_TIMING config OMAP4_ERRATA_I688 bool "OMAP4 errata: Async Bridge Corruption" - depends on ARCH_OMAP4 + depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM select ARCH_HAS_BARRIERS help If a data is stalled inside asynchronous bridge because of back diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 947cafe65aef..65fb6fb38caf 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -2,6 +2,9 @@ # Makefile for the linux kernel. # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ + -I$(srctree)/arch/arm/plat-omap/include + # Common support obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index d07058b9c284..284500ddacdb 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -495,7 +495,7 @@ static int __init beagle_opp_init(void) } return 0; } -device_initcall(beagle_opp_init); +omap_device_initcall(beagle_opp_init); static void __init omap3_beagle_init(void) { diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 46f4fc982766..eb667261df08 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -18,6 +18,7 @@ #include <video/omapdss.h> #include <linux/platform_data/spi-omap2-mcspi.h> +#include "soc.h" #include "board-rx51.h" #include "mux.h" @@ -85,5 +86,5 @@ static int __init rx51_video_init(void) return 0; } -subsys_initcall(rx51_video_init); +omap_subsys_initcall(rx51_video_init); #endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */ diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index 1ff646908627..b870f6a9e283 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -52,6 +52,6 @@ static int __init omap2xxx_clk_arch_init(void) return ret; } -arch_initcall(omap2xxx_clk_arch_init); +omap_arch_initcall(omap2xxx_clk_arch_init); diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 4eacab8f1176..0b02b4161d71 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c |