diff options
39 files changed, 4945 insertions, 333 deletions
diff --git a/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml new file mode 100644 index 000000000000..c40a74b5d672 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,aoncc-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for LPASS Always ON Clock Controller on SM8250 SoCs + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. + See include/dt-bindings/clock/qcom,sm8250-lpass-aoncc.h for the full list + of Audio Clock controller clock IDs. + +properties: + compatible: + const: qcom,sm8250-lpass-aon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: LPASS Core voting clock + - description: Glitch Free Mux register clock + + clock-names: + items: + - const: core + - const: bus + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h> + #include <dt-bindings/sound/qcom,q6afe.h> + clock-controller@3800000 { + #clock-cells = <1>; + compatible = "qcom,sm8250-lpass-aon"; + reg = <0x03380000 0x40000>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "bus"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml new file mode 100644 index 000000000000..915d76206ad0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,audiocc-sm8250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock bindings for LPASS Audio Clock Controller on SM8250 SoCs + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. + See include/dt-bindings/clock/qcom,sm8250-lpass-audiocc.h for the full list + of Audio Clock controller clock IDs. + +properties: + compatible: + const: qcom,sm8250-lpass-audiocc + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clocks: + items: + - description: LPASS Core voting clock + - description: Glitch Free Mux register clock + + clock-names: + items: + - const: core + - const: bus + +required: + - compatible + - reg + - '#clock-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h> + #include <dt-bindings/sound/qcom,q6afe.h> + clock-controller@3300000 { + #clock-cells = <1>; + compatible = "qcom,sm8250-lpass-audiocc"; + reg = <0x03300000 0x30000>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "bus"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml new file mode 100644 index 000000000000..1121b3934cb9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx55.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SDX55 + +maintainers: + - Vinod Koul <vkoul@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SDX55 + + See also: + - dt-bindings/clock/qcom,gcc-sdx55.h + +properties: + compatible: + const: qcom,gcc-sdx55 + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: PLL test clock source (Optional clock) + minItems: 2 + maxItems: 3 + + clock-names: + items: + - const: bi_tcxo + - const: sleep_clk + - const: core_bi_pll_test_se # Optional clock + minItems: 2 + maxItems: 3 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sdx55"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, <&pll_test_clk>; + clock-names = "bi_tcxo", "sleep_clk", "core_bi_pll_test_se"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index a46a3a799a70..12c9cbc0ebf9 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -19,8 +19,10 @@ properties: enum: - qcom,sc7180-rpmh-clk - qcom,sdm845-rpmh-clk + - qcom,sdx55-rpmh-clk - qcom,sm8150-rpmh-clk - qcom,sm8250-rpmh-clk + - qcom,sm8350-rpmh-clk clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml new file mode 100644 index 000000000000..f49027edfc44 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Camera Clock & Reset Controller Binding for SC7180 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm camera clock control module which supports the clocks, resets and + power domains on SC7180. + + See also: + - dt-bindings/clock/qcom,camcc-sc7180.h + +properties: + compatible: + const: qcom,sc7180-camcc + + clocks: + items: + - description: Board XO source + - description: Camera_ahb clock from GCC + - description: Camera XO clock from GCC + + clock-names: + items: + - const: bi_tcxo + - const: iface + - const: xo + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@ad00000 { + compatible = "qcom,sc7180-camcc"; + reg = <0x0ad00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_XO_CLK>; + clock-names = "bi_tcxo", "iface", "xo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt deleted file mode 100644 index da92f5748dee..000000000000 --- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt +++ /dev/null @@ -1,68 +0,0 @@ -* Renesas R-Car USB 2.0 clock selector - -This file provides information on what the device node for the R-Car USB 2.0 -clock selector. - -If you connect an external clock to the USB_EXTAL pin only, you should set -the clock rate to "usb_extal" node only. -If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module -is not needed because this is default setting. (Of course, you can set the -clock rates to both "usb_extal" and "usb_xtal" nodes. - -Case 1: An external clock connects to R-Car SoC - +----------+ +--- R-Car ---------------------+ - |External |---|USB_EXTAL ---> all usb channels| - |clock | |USB_XTAL | - +----------+ +-------------------------------+ -In this case, we need this driver with "usb_extal" clock. - -Case 2: An oscillator connects to R-Car SoC - +----------+ +--- R-Car ---------------------+ - |Oscillator|---|USB_EXTAL -+-> all usb channels| - | |---|USB_XTAL --+ | - +----------+ +-------------------------------+ -In this case, we don't need this selector. - -Required properties: -- compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of - an R8A7795 SoC. - "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of - an R8A77960 SoC. - "renesas,r8a77961-rcar-usb2-clock-sel" if the device if a part of - an R8A77961 SoC. - "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3 - compatible device. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: offset and length of the USB 2.0 clock selector register block. -- clocks: A list of phandles and specifier pairs. -- clock-names: Name of the clocks. - - The functional clock of USB 2.0 host side must be "ehci_ohci" - - The functional clock of HS-USB side must be "hs-usb-if" - - The USB_EXTAL clock pin must be "usb_extal" - - The USB_XTAL clock pin must be "usb_xtal" -- #clock-cells: Must be 0 -- power-domains: A phandle and symbolic PM domain specifier. - See power/renesas,rcar-sysc.yaml. -- resets: A list of phandles and specifier pairs. -- reset-names: Name of the resets. - - The reset of USB 2.0 host side must be "ehci_ohci" - - The reset of HS-USB side must be "hs-usb-if" - -Example (R-Car H3): - - usb2_clksel: clock-controller@e6590630 { - compatible = "renesas,r8a7795-rcar-usb2-clock-sel", - "renesas,rcar-gen3-usb2-clock-sel"; - reg = <0 0xe6590630 0 0x02>; - clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, - <&usb_extal>, <&usb_xtal>; - clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal"; - #clock-cells = <0>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 703>, <&cpg 704>; - reset-names = "ehci_ohci", "hs-usb-if"; - }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml new file mode 100644 index 000000000000..5be1229b3d6e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas R-Car USB 2.0 clock selector + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +description: | + If you connect an external clock to the USB_EXTAL pin only, you should set + the clock rate to "usb_extal" node only. + If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module + is not needed because this is default setting. (Of course, you can set the + clock rates to both "usb_extal" and "usb_xtal" nodes. + + Case 1: An external clock connects to R-Car SoC + +----------+ +--- R-Car ---------------------+ + |External |---|USB_EXTAL ---> all usb channels| + |clock | |USB_XTAL | + +----------+ +-------------------------------+ + + In this case, we need this driver with "usb_extal" clock. + + Case 2: An oscillator connects to R-Car SoC + +----------+ +--- R-Car ---------------------+ + |Oscillator|---|USB_EXTAL -+-> all usb channels| + | |---|USB_XTAL --+ | + +----------+ +-------------------------------+ + In this case, we don't need this selector. + +properties: + compatible: + items: + - enum: + - renesas,r8a7795-rcar-usb2-clock-sel # R-Car H3 + - renesas,r8a7796-rcar-usb2-clock-sel # R-Car M3-W + - renesas,r8a77961-rcar-usb2-clock-sel # R-Car M3-W+ + - const: renesas,rcar-gen3-usb2-clock-sel + + reg: + maxItems: 1 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: ehci_ohci + - const: hs-usb-if + - const: usb_extal + - const: usb_xtal + + '#clock-cells': + const: 0 + + power-domains: + maxItems: 1 + + resets: + minItems: 2 + maxItems: 2 + + reset-names: + items: + - const: ehci_ohci + - const: hs-usb-if + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - power-domains + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + usb2_clksel: clock-controller@e6590630 { + compatible = "renesas,r8a7795-rcar-usb2-clock-sel", + "renesas,rcar-gen3-usb2-clock-sel"; + reg = <0xe6590630 0x02>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, + <&usb_extal>, <&usb_xtal>; + clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal"; + #clock-cells = <0>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + reset-names = "ehci_ohci", "hs-usb-if"; + }; diff --git a/MAINTAINERS b/MAINTAINERS index e73636b75f29..595e1023b398 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14888,7 +14888,7 @@ RENESAS CLOCK DRIVERS M: Geert Uytterhoeven <geert+renesas@glider.be> L: linux-renesas-soc@vger.kernel.org S: Supported -T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git clk-renesas +T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git renesas-clk F: Documentation/devicetree/bindings/clock/renesas,* F: drivers/clk/renesas/ diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 6cf59e3c31b4..c77feb6f7115 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -420,7 +420,7 @@ static struct clk_core *clk_core_get(struct clk_core *core, u8 p_index) static void clk_core_fill_parent_index(struct clk_core *core, u8 index) { struct clk_parent_map *entry = &core->parents[index]; - struct clk_core *parent = ERR_PTR(-ENOENT); + struct clk_core *parent; if (entry->hw) { parent = entry->hw->core; diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index 3a965bd326d5..d32bb12cd8d0 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -44,7 +44,7 @@ config QCOM_CLK_APCC_MSM8996 help Support for the CPU clock controller on msm8996 devices. Say Y if you want to support CPU clock scaling using CPUfreq - drivers for dyanmic power management. + drivers for dynamic power management. config QCOM_CLK_RPM tristate "RPM based Clock Controller" @@ -290,6 +290,15 @@ config QCS_GCC_404 Say Y if you want to use multimedia devices or peripheral devices such as UART, SPI, I2C, USB, SD/eMMC, PCIe etc. +config SC_CAMCC_7180 + tristate "SC7180 Camera Clock Controller" + select SC_GCC_7180 + help + Support for the camera clock controller on Qualcomm Technologies, Inc + SC7180 devices. + Say Y if you want to support camera devices and functionality such as + capturing pictures. + config SC_DISPCC_7180 tristate "SC7180 Display Clock Controller" select SC_GCC_7180 @@ -413,6 +422,14 @@ config SDM_LPASSCC_845 Say Y if you want to use the LPASS branch clocks of the LPASS clock controller to reset the LPASS subsystem. +config SDX_GCC_55 + tristate "SDX55 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDX55 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + config SM_DISPCC_8250 tristate "SM8150 and SM8250 Display Clock Controller" depends on SM_GCC_8150 || SM_GCC_8250 @@ -502,4 +519,10 @@ config KRAITCC Support for the Krait CPU clocks on Qualcomm devices. Say Y if you want to support CPU frequency scaling. +config CLK_GFM_LPASS_SM8250 + tristate "SM8250 GFM LPASS Clocks" + help + Support for the Glitch Free Mux (GFM) Low power audio + subsystem (LPASS) clocks found on SM8250 SoCs. + endif diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile index 11ae86febe87..9e5e0e3cb7b4 100644 --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile @@ -19,6 +19,7 @@ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o # Keep alphabetically sorted by config obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o +obj-$(CONFIG_CLK_GFM_LPASS_SM8250) += lpass-gfm-sm8250.o obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o @@ -51,6 +52,7 @@ obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o obj-$(CONFIG_QCS_GCC_404) += gcc-qcs404.o obj-$(CONFIG_QCS_Q6SSTOP_404) += q6sstop-qcs404.o obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o +obj-$(CONFIG_SC_CAMCC_7180) += camcc-sc7180.o obj-$(CONFIG_SC_DISPCC_7180) += dispcc-sc7180.o obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o @@ -64,6 +66,7 @@ obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o obj-$(CONFIG_SDM_GPUCC_845) += gpucc-sdm845.o obj-$(CONFIG_SDM_LPASSCC_845) += lpasscc-sdm845.o obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o +obj-$(CONFIG_SDX_GCC_55) += gcc-sdx55.o obj-$(CONFIG_SM_DISPCC_8250) += dispcc-sm8250.o obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o diff --git a/drivers/clk/qcom/camcc-sc7180.c b/drivers/clk/qcom/camcc-sc7180.c new file mode 100644 index 000000000000..dbac5651ab85 --- /dev/null +++ b/drivers/clk/qcom/camcc-sc7180.c @@ -0,0 +1,1732 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pm_clock.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> + +#include <dt-bindings/clock/qcom,camcc-sc7180.h> + +#include "clk-alpha-pll.h" +#include "clk-branch.h" +#include "clk-rcg.h" +#include "clk-regmap.h" +#include "common.h" +#include "gdsc.h" +#include "reset.h" + +enum { + P_BI_TCXO, + P_CAM_CC_PLL0_OUT_EVEN, + P_CAM_CC_PLL1_OUT_EVEN, + P_CAM_CC_PLL2_OUT_AUX, + P_CAM_CC_PLL2_OUT_EARLY, + P_CAM_CC_PLL3_OUT_MAIN, + P_CORE_BI_PLL_TEST_SE, +}; + +static const struct pll_vco agera_vco[] = { + { 600000000, 3300000000UL, 0 }, +}; + +static const struct pll_vco fabia_vco[] = { + { 249600000, 2000000000UL, 0 }, +}; + +/* 600MHz configuration */ +static const struct alpha_pll_config cam_cc_pll0_config = { + .l = 0x1f, + .alpha = 0x4000, + .config_ctl_val = 0x20485699, + .config_ctl_hi_val = 0x00002067, + .test_ctl_val = 0x40000000, + .user_ctl_hi_val = 0x00004805, + .user_ctl_val = 0x00000001, +}; + +static struct clk_alpha_pll cam_cc_pll0 = { + .offset = 0x0, + .vco_table = fabia_vco, + .num_vco = ARRAY_SIZE(fabia_vco), + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA], + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "cam_cc_pll0", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "bi_tcxo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_fabia_ops, + }, + }, +}; + +/* 860MHz configuration */ +static const struct alpha_pll_config cam_cc_pll1_config = { + .l = 0x2a, + .alpha = 0x1555, + .config_ctl_val = 0x20485699, + .config_ctl_hi_val = 0x00002067, + .test_ctl_val = 0x40000000, + .user_ctl_hi_val = 0x00004805, +}; + +static struct clk_alpha_pll cam_cc_pll1 = { + .offset = 0x1000, + .vco_table = fabia_vco, + .num_vco = ARRAY_SIZE(fabia_vco), + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA], + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "cam_cc_pll1", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "bi_tcxo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_fabia_ops, + }, + }, +}; + +/* 1920MHz configuration */ +static const struct alpha_pll_config cam_cc_pll2_config = { + .l = 0x64, + .config_ctl_val = 0x20000800, + .config_ctl_hi_val = 0x400003D2, + .test_ctl_val = 0x04000400, + .test_ctl_hi_val = 0x00004000, + .user_ctl_val = 0x0000030F, +}; + +static struct clk_alpha_pll cam_cc_pll2 = { + .offset = 0x2000, + .vco_table = agera_vco, + .num_vco = ARRAY_SIZE(agera_vco), + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_AGERA], + .clkr = { + .hw.init = &(struct clk_init_data){ + .name = "cam_cc_pll2", + .parent_data = &(const struct clk_parent_data){ + .fw_name = "bi_tcxo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_agera_ops, + }, + }, +}; + +static struct clk_fixed_factor cam_cc_pll2_out_early = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "cam_cc_pll2_out_early", + .parent_names = (const char *[]){ "cam_cc_pll2" }, + .num_parents = 1, + .ops = &clk_fixed_factor_ops, + }, +}; + +static const struct clk_div_table post_div_table_cam_cc_pll2_out_aux[] = { + { 0x3, 4 }, + { } +}; + +static struct clk_alpha_pll_postdiv cam_cc_pll2_out_aux = { + .offset = 0x2000, + .post_div_shift = 8, + .post_div_table = post_div_table_cam_cc_pll2_out_aux, + .num_post_div = ARRAY_SIZE(post_div_table_cam_cc_pll2_out_aux), + .width = 2, + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_AGERA], + .clkr.hw.init = &(struct clk_init_data){ + .name = "cam_cc_pll2_out_aux", + .parent_data = &(const struct clk_parent_data){ + .hw = &cam_cc_pll2.clkr.hw, + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_alpha_pll_postdiv_ops, + }, +}; + +/* 1080MHz configuration */ +static const struct alpha_pll_config cam_cc_pll3_config = { + .l = 0x38, + .alpha = 0x4000, + .config_ctl_val = 0x20485699, + .config_ctl_hi_val = 0x00002067, + .test_ctl_val = 0x40000000, + .user_ctl_hi_val = 0x00004805, +}; + +static struct clk_alpha_pll cam_cc_pll3 = { + .offset = 0x3000, + .vco_table = fabia_vco, + .num_vco = ARRAY_SIZE(fabia_vco), + .regs = clk_alph |