summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt1
-rw-r--r--Documentation/hwmon/ntc_thermistor6
-rw-r--r--Documentation/hwmon/tc7420
-rw-r--r--drivers/hwmon/Kconfig18
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/atxp1.c58
-rw-r--r--drivers/hwmon/max197.c2
-rw-r--r--drivers/hwmon/ntc_thermistor.c82
-rw-r--r--drivers/hwmon/sht15.c2
-rw-r--r--drivers/hwmon/tc74.c177
-rw-r--r--include/linux/platform_data/ntc_thermistor.h1
11 files changed, 290 insertions, 78 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
index fcca8e744f41..a04a80f9cc70 100644
--- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
+++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
@@ -9,6 +9,7 @@ Requires node properties:
"murata,ncp21wb473"
"murata,ncp03wb473"
"murata,ncp15wl333"
+ "murata,ncp03wf104"
/* Usage of vendor name "ntc" is deprecated */
<DEPRECATED> "ntc,ncp15wb473"
diff --git a/Documentation/hwmon/ntc_thermistor b/Documentation/hwmon/ntc_thermistor
index c5e05e2900a3..1d4cc847c6fe 100644
--- a/Documentation/hwmon/ntc_thermistor
+++ b/Documentation/hwmon/ntc_thermistor
@@ -2,8 +2,10 @@ Kernel driver ntc_thermistor
=================
Supported thermistors from Murata:
-* Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333
- Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', 'ncp15wl333'
+* Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473,
+ NCP15WL333, NCP03WF104
+ Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473',
+ 'ncp15wl333', 'ncp03wf104'
Datasheet: Publicly available at Murata
Supported thermistors from EPCOS:
diff --git a/Documentation/hwmon/tc74 b/Documentation/hwmon/tc74
new file mode 100644
index 000000000000..43027aad5f8e
--- /dev/null
+++ b/Documentation/hwmon/tc74
@@ -0,0 +1,20 @@
+Kernel driver tc74
+====================
+
+Supported chips:
+ * Microchip TC74
+ Prefix: 'tc74'
+ Datasheet: Publicly available at Microchip website.
+
+Description
+-----------
+
+Driver supports the above part.
+
+The tc74 has an 8-bit sensor, with 1 degree centigrade resolution
+and +- 2 degrees centigrade accuracy.
+
+Notes
+-----
+
+Currently entering low power standby mode is not supported.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 25d9e72627e9..54075a07d2a1 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -509,7 +509,7 @@ config SENSORS_G762
config SENSORS_GPIO_FAN
tristate "GPIO fan"
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
depends on THERMAL || THERMAL=n
help
If you say yes here you get support for fans connected to GPIO lines.
@@ -1106,8 +1106,8 @@ config SENSORS_NTC_THERMISTOR
send notifications about the temperature.
Currently, this driver supports
- NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333
- from Murata and B57330V2103 from EPCOS.
+ NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
+ and NCP03WF104 from Murata and B57330V2103 from EPCOS.
This driver can also be built as a module. If so, the module
will be called ntc-thermistor.
@@ -1186,7 +1186,7 @@ config SENSORS_PWM_FAN
config SENSORS_SHT15
tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
If you say yes here you get support for the Sensiron SHT10, SHT11,
SHT15, SHT71, SHT75 humidity and temperature sensors.
@@ -1452,6 +1452,16 @@ config SENSORS_INA2XX
This driver can also be built as a module. If so, the module
will be called ina2xx.
+config SENSORS_TC74
+ tristate "Microchip TC74"
+ depends on I2C
+ help
+ If you say yes here you get support for Microchip TC74 single
+ input temperature sensor chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called tc74.
+
config SENSORS_THMC50
tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b4a40f17e2aa..ab904027f074 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -140,6 +140,7 @@ obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o
+obj-$(CONFIG_SENSORS_TC74) += tc74.o
obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
obj-$(CONFIG_SENSORS_TMP102) += tmp102.o
obj-$(CONFIG_SENSORS_TMP103) += tmp103.o
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index 4c829bb2f9db..f2f2f2fc755a 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -12,10 +12,9 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
+ * The ATXP1 can reside on I2C addresses 0x37 or 0x4e. The chip is
+ * not auto-detected by the driver and must be instantiated explicitly.
+ * See Documentation/i2c/instantiating-devices for more information.
*/
#include <linux/kernel.h>
@@ -43,8 +42,6 @@ MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
#define ATXP1_VIDMASK 0x1f
#define ATXP1_GPIO1MASK 0x0f
-static const unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END };
-
struct atxp1_data {
struct i2c_client *client;
struct mutex update_lock;
@@ -259,48 +256,6 @@ static struct attribute *atxp1_attrs[] = {
};
ATTRIBUTE_GROUPS(atxp1);
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int atxp1_detect(struct i2c_client *new_client,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = new_client->adapter;
-
- u8 temp;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
-
- /* Detect ATXP1, checking if vendor ID registers are all zero */
- if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) &&
- (i2c_smbus_read_byte_data(new_client, 0x3f) == 0) &&
- (i2c_smbus_read_byte_data(new_client, 0xfe) == 0) &&
- (i2c_smbus_read_byte_data(new_client, 0xff) == 0)))
- return -ENODEV;
-
- /*
- * No vendor ID, now checking if registers 0x10,0x11 (non-existent)
- * showing the same as register 0x00
- */
- temp = i2c_smbus_read_byte_data(new_client, 0x00);
-
- if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
- (i2c_smbus_read_byte_data(new_client, 0x11) == temp)))
- return -ENODEV;
-
- /* Get VRM */
- temp = vid_which_vrm();
-
- if ((temp != 90) && (temp != 91)) {
- dev_err(&adapter->dev, "atxp1: Not supporting VRM %d.%d\n",
- temp / 10, temp % 10);
- return -ENODEV;
- }
-
- strlcpy(info->type, "atxp1", I2C_NAME_SIZE);
-
- return 0;
-}
-
static int atxp1_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -314,6 +269,11 @@ static int atxp1_probe(struct i2c_client *client,
/* Get VRM */
data->vrm = vid_which_vrm();
+ if (data->vrm != 90 && data->vrm != 91) {
+ dev_err(dev, "atxp1: Not supporting VRM %d.%d\n",
+ data->vrm / 10, data->vrm % 10);
+ return -ENODEV;
+ }
data->client = client;
mutex_init(&data->update_lock);
@@ -342,8 +302,6 @@ static struct i2c_driver atxp1_driver = {
},
.probe = atxp1_probe,
.id_table = atxp1_id,
- .detect = atxp1_detect,
- .address_list = normal_i2c,
};
module_i2c_driver(atxp1_driver);
diff --git a/drivers/hwmon/max197.c b/drivers/hwmon/max197.c
index cb0dcfda958c..07628569547a 100644
--- a/drivers/hwmon/max197.c
+++ b/drivers/hwmon/max197.c
@@ -324,7 +324,7 @@ static int max197_remove(struct platform_device *pdev)
return 0;
}
-static struct platform_device_id max197_device_ids[] = {
+static const struct platform_device_id max197_device_ids[] = {
{ "max197", max197 },
{ "max199", max199 },
{ }
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index 68800115876b..dc0b76c5e302 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -53,6 +53,7 @@ static const struct platform_device_id ntc_thermistor_id[] = {
{ "ncp03wb473", TYPE_NCPXXWB473 },
{ "ncp15wl333", TYPE_NCPXXWL333 },
{ "b57330v2103", TYPE_B57330V2103},
+ { "ncp03wf104", TYPE_NCPXXWF104 },
{ },
};
@@ -135,6 +136,43 @@ static const struct ntc_compensation ncpXXwl333[] = {
{ .temp_c = 125, .ohm = 707 },
};
+static const struct ntc_compensation ncpXXwf104[] = {
+ { .temp_c = -40, .ohm = 4397119 },
+ { .temp_c = -35, .ohm = 3088599 },
+ { .temp_c = -30, .ohm = 2197225 },
+ { .temp_c = -25, .ohm = 1581881 },
+ { .temp_c = -20, .ohm = 1151037 },
+ { .temp_c = -15, .ohm = 846579 },
+ { .temp_c = -10, .ohm = 628988 },
+ { .temp_c = -5, .ohm = 471632 },
+ { .temp_c = 0, .ohm = 357012 },
+ { .temp_c = 5, .ohm = 272500 },
+ { .temp_c = 10, .ohm = 209710 },
+ { .temp_c = 15, .ohm = 162651 },
+ { .temp_c = 20, .ohm = 127080 },
+ { .temp_c = 25, .ohm = 100000 },
+ { .temp_c = 30, .ohm = 79222 },
+ { .temp_c = 35, .ohm = 63167 },
+ { .temp_c = 40, .ohm = 50677 },
+ { .temp_c = 45, .ohm = 40904 },
+ { .temp_c = 50, .ohm = 33195 },
+ { .temp_c = 55, .ohm = 27091 },
+ { .temp_c = 60, .ohm = 22224 },
+ { .temp_c = 65, .ohm = 18323 },
+ { .temp_c = 70, .ohm = 15184 },
+ { .temp_c = 75, .ohm = 12635 },
+ { .temp_c = 80, .ohm = 10566 },
+ { .temp_c = 85, .ohm = 8873 },
+ { .temp_c = 90, .ohm = 7481 },
+ { .temp_c = 95, .ohm = 6337 },
+ { .temp_c = 100, .ohm = 5384 },
+ { .temp_c = 105, .ohm = 4594 },
+ { .temp_c = 110, .ohm = 3934 },
+ { .temp_c = 115, .ohm = 3380 },
+ { .temp_c = 120, .ohm = 2916 },
+ { .temp_c = 125, .ohm = 2522 },
+};
+
/*
* The following compensation table is from the specification of EPCOS NTC
* Thermistors Datasheet
@@ -190,20 +228,21 @@ struct ntc_data {
static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
{
struct iio_channel *channel = pdata->chan;
- s64 result;
- int val, ret;
+ int raw, uv, ret;
- ret = iio_read_channel_raw(channel, &val);
+ ret = iio_read_channel_raw(channel, &raw);
if (ret < 0) {
pr_err("read channel() error: %d\n", ret);
return ret;
}
- /* unit: mV */
- result = pdata->pullup_uv * (s64) val;
- result >>= 12;
+ ret = iio_convert_raw_to_processed(channel, raw, &uv, 1000);
+ if (ret < 0) {
+ /* Assume 12 bit ADC with vref at pullup_uv */
+ uv = (pdata->pullup_uv * (s64)raw) >> 12;
+ }
- return (int)result;
+ return uv;
}
static const struct of_device_id ntc_match[] = {
@@ -219,6 +258,8 @@ static const struct of_device_id ntc_match[] = {
.data = &ntc_thermistor_id[4] },
{ .compatible = "epcos,b57330v2103",
.data = &ntc_thermistor_id[5]},
+ { .compatible = "murata,ncp03wf104",
+ .data = &ntc_thermistor_id[6] },
/* Usage of vendor name "ntc" is deprecated */
{ .compatible = "ntc,ncp15wb473",
@@ -309,30 +350,27 @@ static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
static int get_ohm_of_thermistor(struct ntc_data *data, unsigned int uv)
{
struct ntc_thermistor_platform_data *pdata = data->pdata;
- u64 mv = uv / 1000;
- u64 pmv = pdata->pullup_uv / 1000;
+ u32 puv = pdata->pullup_uv;
u64 n, puo, pdo;
puo = pdata->pullup_ohm;
pdo = pdata->pulldown_ohm;
- if (mv == 0) {
- if (pdata->connect == NTC_CONNECTED_POSITIVE)
- return INT_MAX;
- return 0;
- }
- if (mv >= pmv)
+ if (uv == 0)
+ return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
+ INT_MAX : 0;
+ if (uv >= puv)
return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
0 : INT_MAX;
if (pdata->connect == NTC_CONNECTED_POSITIVE && puo == 0)
- n = div64_u64_safe(pdo * (pmv - mv), mv);
+ n = div_u64(pdo * (puv - uv), uv);
else if (pdata->connect == NTC_CONNECTED_GROUND && pdo == 0)
- n = div64_u64_safe(puo * mv, pmv - mv);
+ n = div_u64(puo * uv, puv - uv);
else if (pdata->connect == NTC_CONNECTED_POSITIVE)
- n = div64_u64_safe(pdo * puo * (pmv - mv),
- puo * mv - pdo * (pmv - mv));
+ n = div64_u64_safe(pdo * puo * (puv - uv),
+ puo * uv - pdo * (puv - uv));
else
- n = div64_u64_safe(pdo * puo * mv, pdo * (pmv - mv) - puo * mv);
+ n = div64_u64_safe(pdo * puo * uv, pdo * (puv - uv) - puo * uv);
if (n > INT_MAX)
n = INT_MAX;
@@ -567,6 +605,10 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
data->comp = b57330v2103;
data->n_comp = ARRAY_SIZE(b57330v2103);
break;
+ case TYPE_NCPXXWF104:
+ data->comp = ncpXXwf104;
+ data->n_comp = ARRAY_SIZE(ncpXXwf104);
+ break;
default:
dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
pdev_id->driver_data, pdev_id->name);
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index d4f0935daaa1..497a7f822a12 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -1074,7 +1074,7 @@ static int sht15_remove(struct platform_device *pdev)
return 0;
}
-static struct platform_device_id sht15_device_ids[] = {
+static const struct platform_device_id sht15_device_ids[] = {
{ "sht10", sht10 },
{ "sht11", sht11 },
{ "sht15", sht15 },
diff --git a/drivers/hwmon/tc74.c b/drivers/hwmon/tc74.c
new file mode 100644
index 000000000000..d95165158800
--- /dev/null
+++ b/drivers/hwmon/tc74.c
@@ -0,0 +1,177 @@
+/*
+ * An hwmon driver for the Microchip TC74
+ *
+ * Copyright 2015 Maciej Szmigiero <mail@maciej.szmigiero.name>
+ *
+ * Based on ad7414.c:
+ * Copyright 2006 Stefan Roese, DENX Software Engineering
+ * Copyright 2008 Sean MacLennan, PIKA Technologies
+ * Copyright 2008 Frank Edelhaeuser, Spansion Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+/* TC74 registers */
+#define TC74_REG_TEMP 0x00
+#define TC74_REG_CONFIG 0x01
+
+struct tc74_data {
+ struct i2c_client *client;
+ struct mutex lock; /* atomic read data updates */
+ bool valid; /* validity of fields below */
+ unsigned long next_update; /* In jiffies */
+ s8 temp_input; /* Temp value in dC */
+};
+
+static int tc74_update_device(struct device *dev)
+{
+ struct tc74_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ int ret;
+
+ ret = mutex_lock_interruptible(&data->lock);
+ if (ret)
+ return ret;
+
+ if (time_after(jiffies, data->next_update) || !data->valid) {
+ s32 value;
+
+ value = i2c_smbus_read_byte_data(client, TC74_REG_CONFIG);
+ if (value < 0) {
+ dev_dbg(&client->dev, "TC74_REG_CONFIG read err %d\n",
+ (int)value);
+
+ ret = value;
+ goto ret_unlock;
+ }
+
+ if (!(value & BIT(6))) {
+ /* not ready yet */
+
+ ret = -EAGAIN;
+ goto ret_unlock;
+ }
+
+ value = i2c_smbus_read_byte_data(client, TC74_REG_TEMP);
+ if (value < 0) {
+ dev_dbg(&client->dev, "TC74_REG_TEMP read err %d\n",
+ (int)value);
+
+ ret = value;
+ goto ret_unlock;
+ }
+
+ data->temp_input = value;
+ data->next_update = jiffies + HZ / 4;
+ data->valid = true;
+ }
+
+ret_unlock:
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+static ssize_t show_temp_input(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct tc74_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = tc74_update_device(dev);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%d\n", data->temp_input * 1000);
+}
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0);
+
+static struct attribute *tc74_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ NULL
+};
+
+ATTRIBUTE_GROUPS(tc74);
+
+static int tc74_probe(struct i2c_client *client,
+ const struct i2c_device_id *dev_id)
+{
+ struct device *dev = &client->dev;
+ struct tc74_data *data;
+ struct device *hwmon_dev;
+ s32 conf;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EOPNOTSUPP;
+
+ data = devm_kzalloc(dev, sizeof(struct tc74_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ mutex_init(&data->lock);
+
+ /* Make sure the chip is powered up. */
+ conf = i2c_smbus_read_byte_data(client, TC74_REG_CONFIG);
+ if (conf < 0) {
+ dev_err(dev, "unable to read config register\n");
+
+ return conf;
+ }
+
+ if (conf & 0x3f) {
+ dev_err(dev, "invalid config register value\n");
+
+ return -ENODEV;
+ }
+
+ if (conf & BIT(7)) {
+ s32 ret;
+
+ conf &= ~BIT(7);
+
+ ret = i2c_smbus_write_byte_data(client, TC74_REG_CONFIG, conf);
+ if (ret)
+ dev_warn(dev, "unable to disable STANDBY\n");
+ }
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev,
+ client->name,
+ data, tc74_groups);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id tc74_id[] = {
+ { "tc74", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, tc74_id);
+
+static struct i2c_driver tc74_driver = {
+ .driver = {
+ .name = "tc74",
+ },
+ .probe = tc74_probe,
+ .id_table = tc74_id,
+};
+
+module_i2c_driver(tc74_driver);
+
+MODULE_AUTHOR("Maciej Szmigiero <mail@maciej.szmigiero.name>");
+
+MODULE_DESCRIPTION("TC74 driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
index 0a6de4ca4930..aed170588b74 100644
--- a/include/linux/platform_data/ntc_thermistor.h
+++ b/include/linux/platform_data/ntc_thermistor.h
@@ -27,6 +27,7 @@ enum ntc_thermistor_type {
TYPE_NCPXXWB473,
TYPE_NCPXXWL333,
TYPE_B57330V2103,
+ TYPE_NCPXXWF104,
};
struct ntc_thermistor_platform_data {