summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig3
-rw-r--r--arch/arm/mach-realview/Kconfig71
-rw-r--r--arch/arm/mach-realview/Makefile2
-rw-r--r--drivers/irqchip/Makefile2
-rw-r--r--drivers/mtd/maps/Kconfig2
5 files changed, 15 insertions, 65 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2d601d769a1c..8e440c9654cb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -277,10 +277,9 @@ config PHYS_OFFSET
ARCH_INTEGRATOR || \
ARCH_IOP13XX || \
ARCH_KS8695 || \
- (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
+ ARCH_REALVIEW
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x20000000 if ARCH_S5PV210
- default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
default 0xc0000000 if ARCH_SA1100
help
Please provide the physical address corresponding to the
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 739800e8101f..1d7c83e73ffb 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -2,33 +2,29 @@ menuconfig ARCH_REALVIEW
bool "ARM Ltd. RealView family"
depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
select ARM_AMBA
+ select ARM_GIC
select ARM_TIMER_SP804
+ select CLK_SP810
select COMMON_CLK_VERSATILE
select GPIO_PL061 if GPIOLIB
- select ICST
- select PLAT_VERSATILE
- select PLAT_VERSATILE_SCHED_CLOCK
- help
- This enables support for ARM Ltd RealView boards.
-
-if ARCH_REALVIEW
-
-config REALVIEW_DT
- bool "Support RealView(R) Device Tree based boot"
- select ARM_GIC
- select CLK_SP810
- select HAVE_SMP
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if SMP
+ select HAVE_PATA_PLATFORM
+ select HAVE_TCM
select ICST
select MACH_REALVIEW_EB if ARCH_MULTI_V5
select MFD_SYSCON
+ select PLAT_VERSATILE
+ select PLAT_VERSATILE_SCHED_CLOCK
select POWER_RESET
select POWER_RESET_VERSATILE
select POWER_SUPPLY
select SOC_REALVIEW
select USE_OF
help
- Include support for booting the ARM(R) RealView(R) evaluation
- boards using a device tree machine description.
+ This enables support for ARM Ltd RealView boards.
+
+if ARCH_REALVIEW
config MACH_REALVIEW_EB
bool "Support RealView(R) Emulation Baseboard"
@@ -59,8 +55,6 @@ config REALVIEW_EB_ARM1176
config REALVIEW_EB_A9MP
bool "Support Multicore Cortex-A9 Tile"
depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
@@ -70,30 +64,15 @@ config REALVIEW_EB_A9MP
config REALVIEW_EB_ARM11MP
bool "Support ARM11MPCore Tile"
depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
Enable support for the ARM11MPCore tile fitted to the Realview(R)
Emulation Baseboard platform.
-config REALVIEW_EB_ARM11MP_REVB
- bool "Support ARM11MPCore RevB Tile"
- depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6
- help
- Enable support for the ARM11MPCore Revision B tile on the
- Realview(R) Emulation Baseboard platform. Since there are device
- address differences, a kernel built with this option enabled is
- not compatible with other revisions of the ARM11MPCore tile.
-
config MACH_REALVIEW_PB11MP
bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
depends on ARCH_MULTI_V6
- select ARM_GIC
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_PATA_PLATFORM
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
@@ -105,7 +84,6 @@ config MACH_REALVIEW_PB11MP
config MACH_REALVIEW_PB1176
bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
depends on ARCH_MULTI_V6
- select ARM_GIC
select CPU_V6
select HAVE_TCM
select MIGHT_HAVE_CACHE_L2X0
@@ -113,20 +91,9 @@ config MACH_REALVIEW_PB1176
Include support for the ARM(R) RealView(R) Platform Baseboard for
ARM1176JZF-S.
-config REALVIEW_PB1176_SECURE_FLASH
- bool "Allow access to the secure flash memory block"
- depends on MACH_REALVIEW_PB1176
- default n
- help
- Select this option if Linux will only run in secure mode on the
- RealView PB1176 platform and access to the secure flash memory
- block (64MB @ 0x3c000000) is required.
-
config MACH_REALVIEW_PBA8
bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
depends on ARCH_MULTI_V7
- select ARM_GIC
- select HAVE_PATA_PLATFORM
help
Include support for the ARM(R) RealView Platform Baseboard for
Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has
@@ -135,10 +102,6 @@ config MACH_REALVIEW_PBA8
config MACH_REALVIEW_PBX
bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
depends on ARCH_MULTI_V7
- select ARM_GIC
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_PATA_PLATFORM
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select ZONE_DMA
@@ -146,16 +109,4 @@ config MACH_REALVIEW_PBX
Include support for the ARM(R) RealView(R) Platform Baseboard
Explore.
-config REALVIEW_HIGH_PHYS_OFFSET
- bool "High physical base address for the RealView platform"
- depends on MMU && !MACH_REALVIEW_PB1176
- default y
- help
- RealView boards other than PB1176 have the RAM available at
- 0x70000000, 256MB of which being mirrored at 0x00000000. If
- the board supports 512MB of RAM, this option allows the
- memory to be accessed contiguously at the high physical
- offset. On the PBX board, disabling this option allows 1GB of
- RAM to be used with HIGHMEM.
-
endif
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 97dab53daaf1..6df86c29bbc3 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -4,6 +4,6 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-versatile/include
-obj-$(CONFIG_REALVIEW_DT) += realview-dt.o
+obj-y += realview-dt.o
obj-$(CONFIG_SMP) += platsmp-dt.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 4c203b6b8163..92fa06e16a17 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi-nmi.o
obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
obj-$(CONFIG_ARM_GIC) += irq-gic.o irq-gic-common.o
obj-$(CONFIG_ARM_GIC_PM) += irq-gic-pm.o
-obj-$(CONFIG_REALVIEW_DT) += irq-gic-realview.o
+obj-$(CONFIG_ARCH_REALVIEW) += irq-gic-realview.o
obj-$(CONFIG_ARM_GIC_V2M) += irq-gic-v2m.o
obj-$(CONFIG_ARM_GIC_V3) += irq-gic-v3.o irq-gic-common.o
obj-$(CONFIG_ARM_GIC_V3_ITS) += irq-gic-v3-its.o irq-gic-v3-its-pci-msi.o irq-gic-v3-its-platform-msi.o
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 392f9eff5fb7..5bcc896a48c3 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -78,7 +78,7 @@ config MTD_PHYSMAP_OF_VERSATILE
bool "Support ARM Versatile physmap OF"
depends on MTD_PHYSMAP_OF
depends on MFD_SYSCON
- default y if (ARCH_INTEGRATOR || ARCH_VERSATILE || REALVIEW_DT)
+ default y if (ARCH_INTEGRATOR || ARCH_VERSATILE || ARCH_REALVIEW)
help
This provides some extra DT physmap parsing for the ARM Versatile
platforms, basically to add a VPP (write protection) callback so