summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/hwmon/it8710
-rw-r--r--drivers/hwmon/hwmon-vid.c10
-rw-r--r--drivers/hwmon/hwmon.c26
-rw-r--r--drivers/hwmon/it87.c918
-rw-r--r--drivers/hwmon/w83627ehf.c99
-rw-r--r--drivers/hwmon/w83627hf.c81
6 files changed, 689 insertions, 455 deletions
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 87850d86c559..8386aadc0a82 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -209,3 +209,13 @@ doesn't use CPU cycles.
Trip points must be set properly before switching to automatic fan speed
control mode. The driver will perform basic integrity checks before
actually switching to automatic control mode.
+
+
+Temperature offset attributes
+-----------------------------
+
+The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
+temperature for thermal diodes or diode-connected thermal transistors.
+If a temperature sensor is configured for thermistors, the attribute values
+are ignored. If the thermal sensor type is Intel PECI, the temperature offset
+must be programmed to the critical CPU temperature.
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 9f26400713f0..89cfd64b3373 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -115,6 +115,12 @@ int vid_from_reg(int val, u8 vrm)
return (val < 32) ? 1550 - 25 * val
: 775 - (25 * (val - 31)) / 2;
+ case 26: /* AMD family 10h to 15h, serial VID */
+ val &= 0x7f;
+ if (val >= 0x7c)
+ return 0;
+ return DIV_ROUND_CLOSEST(15500 - 125 * val, 10);
+
case 91: /* VRM 9.1 */
case 90: /* VRM 9.0 */
val &= 0x1f;
@@ -195,6 +201,10 @@ static struct vrm_model vrm_models[] = {
{X86_VENDOR_AMD, 0xF, 0x40, 0x7F, ANY, 24}, /* NPT family 0Fh */
{X86_VENDOR_AMD, 0xF, 0x80, ANY, ANY, 25}, /* future fam. 0Fh */
{X86_VENDOR_AMD, 0x10, 0x0, ANY, ANY, 25}, /* NPT family 10h */
+ {X86_VENDOR_AMD, 0x11, 0x0, ANY, ANY, 26}, /* family 11h */
+ {X86_VENDOR_AMD, 0x12, 0x0, ANY, ANY, 26}, /* family 12h */
+ {X86_VENDOR_AMD, 0x14, 0x0, ANY, ANY, 26}, /* family 14h */
+ {X86_VENDOR_AMD, 0x15, 0x0, ANY, ANY, 26}, /* family 15h */
{X86_VENDOR_INTEL, 0x6, 0x0, 0x6, ANY, 82}, /* Pentium Pro,
* Pentium II, Xeon,
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index c3c471ca202f..646314f7c839 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -84,19 +84,21 @@ static void __init hwmon_pci_quirks(void)
/* Open access to 0x295-0x296 on MSI MS-7031 */
sb = pci_get_device(PCI_VENDOR_ID_ATI, 0x436c, NULL);
- if (sb &&
- (sb->subsystem_vendor == 0x1462 && /* MSI */
- sb->subsystem_device == 0x0031)) { /* MS-7031 */
-
- pci_read_config_byte(sb, 0x48, &enable);
- pci_read_config_word(sb, 0x64, &base);
-
- if (base == 0 && !(enable & BIT(2))) {
- dev_info(&sb->dev,
- "Opening wide generic port at 0x295\n");
- pci_write_config_word(sb, 0x64, 0x295);
- pci_write_config_byte(sb, 0x48, enable | BIT(2));
+ if (sb) {
+ if (sb->subsystem_vendor == 0x1462 && /* MSI */
+ sb->subsystem_device == 0x0031) { /* MS-7031 */
+ pci_read_config_byte(sb, 0x48, &enable);
+ pci_read_config_word(sb, 0x64, &base);
+
+ if (base == 0 && !(enable & BIT(2))) {
+ dev_info(&sb->dev,
+ "Opening wide generic port at 0x295\n");
+ pci_write_config_word(sb, 0x64, 0x295);
+ pci_write_config_byte(sb, 0x48,
+ enable | BIT(2));
+ }
}
+ pci_dev_put(sb);
}
#endif
}
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index d32aa354cbdf..117d66fcded6 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -203,6 +203,8 @@ static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82 };
static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86 };
static const u8 IT87_REG_FANX[] = { 0x18, 0x19, 0x1a, 0x81, 0x83 };
static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
+static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 };
+
#define IT87_REG_FAN_MAIN_CTRL 0x13
#define IT87_REG_FAN_CTL 0x14
#define IT87_REG_PWM(nr) (0x15 + (nr))
@@ -226,6 +228,83 @@ static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
#define IT87_REG_AUTO_TEMP(nr, i) (0x60 + (nr) * 8 + (i))
#define IT87_REG_AUTO_PWM(nr, i) (0x65 + (nr) * 8 + (i))
+struct it87_devices {
+ const char *name;
+ u16 features;
+ u8 peci_mask;
+ u8 old_peci_mask;
+};
+
+#define FEAT_12MV_ADC (1 << 0)
+#define FEAT_NEWER_AUTOPWM (1 << 1)
+#define FEAT_OLD_AUTOPWM (1 << 2)
+#define FEAT_16BIT_FANS (1 << 3)
+#define FEAT_TEMP_OFFSET (1 << 4)
+#define FEAT_TEMP_PECI (1 << 5)
+#define FEAT_TEMP_OLD_PECI (1 << 6)
+
+static const struct it87_devices it87_devices[] = {
+ [it87] = {
+ .name = "it87",
+ .features = FEAT_OLD_AUTOPWM, /* may need to overwrite */
+ },
+ [it8712] = {
+ .name = "it8712",
+ .features = FEAT_OLD_AUTOPWM, /* may need to overwrite */
+ },
+ [it8716] = {
+ .name = "it8716",
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET,
+ },
+ [it8718] = {
+ .name = "it8718",
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
+ | FEAT_TEMP_OLD_PECI,
+ .old_peci_mask = 0x4,
+ },
+ [it8720] = {
+ .name = "it8720",
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
+ | FEAT_TEMP_OLD_PECI,
+ .old_peci_mask = 0x4,
+ },
+ [it8721] = {
+ .name = "it8721",
+ .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI,
+ .peci_mask = 0x05,
+ .old_peci_mask = 0x02, /* Actually reports PCH */
+ },
+ [it8728] = {
+ .name = "it8728",
+ .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
+ .peci_mask = 0x07,
+ },
+ [it8782] = {
+ .name = "it8782",
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
+ | FEAT_TEMP_OLD_PECI,
+ .old_peci_mask = 0x4,
+ },
+ [it8783] = {
+ .name = "it8783",
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
+ | FEAT_TEMP_OLD_PECI,
+ .old_peci_mask = 0x4,
+ },
+};
+
+#define has_16bit_fans(data) ((data)->features & FEAT_16BIT_FANS)
+#define has_12mv_adc(data) ((data)->features & FEAT_12MV_ADC)
+#define has_newer_autopwm(data) ((data)->features & FEAT_NEWER_AUTOPWM)
+#define has_old_autopwm(data) ((data)->features & FEAT_OLD_AUTOPWM)
+#define has_temp_offset(data) ((data)->features & FEAT_TEMP_OFFSET)
+#define has_temp_peci(data, nr) (((data)->features & FEAT_TEMP_PECI) && \
+ ((data)->peci_mask & (1 << nr)))
+#define has_temp_old_peci(data, nr) \
+ (((data)->features & FEAT_TEMP_OLD_PECI) && \
+ ((data)->old_peci_mask & (1 << nr)))
struct it87_sio_data {
enum chips type;
@@ -249,7 +328,9 @@ struct it87_sio_data {
struct it87_data {
struct device *hwmon_dev;
enum chips type;
- u8 revision;
+ u16 features;
+ u8 peci_mask;
+ u8 old_peci_mask;
unsigned short addr;
const char *name;
@@ -258,17 +339,13 @@ struct it87_data {
unsigned long last_updated; /* In jiffies */
u16 in_scaled; /* Internal voltage sensors are scaled */
- u8 in[9]; /* Register value */
- u8 in_max[8]; /* Register value */
- u8 in_min[8]; /* Register value */
+ u8 in[9][3]; /* [nr][0]=in, [1]=min, [2]=max */
u8 has_fan; /* Bitfield, fans enabled */
- u16 fan[5]; /* Register values, possibly combined */
- u16 fan_min[5]; /* Register values, possibly combined */
+ u16 fan[5][2]; /* Register values, [nr][0]=fan, [1]=min */
u8 has_temp; /* Bitfield, temp sensors enabled */
- s8 temp[3]; /* Register value */
- s8 temp_high[3]; /* Register value */
- s8 temp_low[3]; /* Register value */
- u8 sensor; /* Register value */
+ s8 temp[3][4]; /* [nr][0]=temp, [1]=min, [2]=max, [3]=offset */
+ u8 sensor; /* Register value (IT87_REG_TEMP_ENABLE) */
+ u8 extra; /* Register value (IT87_REG_TEMP_EXTRA) */
u8 fan_div[3]; /* Register encoding, shifted right */
u8 vid; /* Register encoding, combined */
u8 vrm;
@@ -296,26 +373,6 @@ struct it87_data {
s8 auto_temp[3][5]; /* [nr][0] is point1_temp_hyst */
};
-static inline int has_12mv_adc(const struct it87_data *data)
-{
- /*
- * IT8721F and later have a 12 mV ADC, also with internal scaling
- * on selected inputs.
- */
- return data->type == it8721
- || data->type == it8728;
-}
-
-static inline int has_newer_autopwm(const struct it87_data *data)
-{
- /*
- * IT8721F and later have separate registers for the temperature
- * mapping and the manual duty cycle.
- */
- return data->type == it8721
- || data->type == it8728;
-}
-
static int adc_lsb(const struct it87_data *data, int nr)
{
int lsb = has_12mv_adc(data) ? 12 : 16;
@@ -398,35 +455,6 @@ static const unsigned int pwm_freq[8] = {
750000 / 128,
};
-static inline int has_16bit_fans(const struct it87_data *data)
-{
- /*
- * IT8705F Datasheet 0.4.1, 3h == Version G.
- * IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
- * These are the first revisions with 16-bit tachometer support.
- */
- return (data->type == it87 && data->revision >= 0x03)
- || (data->type == it8712 && data->revision >= 0x08)
- || data->type == it8716
- || data->type == it8718
- || data->type == it8720
- || data->type == it8721
- || data->type == it8728
- || data->type == it8782
- || data->type == it8783;
-}
-
-static inline int has_old_autopwm(const struct it87_data *data)
-{
- /*
- * The old automatic fan speed control interface is implemented
- * by IT8705F chips up to revision F and IT8712F chips up to
- * revision G.
- */
- return (data->type == it87 && data->revision < 0x03)
- || (data->type == it8712 && data->revision < 0x08);
-}
-
static int it87_probe(struct platform_device *pdev);
static int it87_remove(struct platform_device *pdev);
@@ -447,59 +475,22 @@ static struct platform_driver it87_driver = {
};
static ssize_t show_in(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
-
- struct it87_data *data = it87_update_device(dev);
- return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in[nr]));
-}
-
-static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
- char *buf)
+ char *buf)
{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int index = sattr->index;
struct it87_data *data = it87_update_device(dev);
- return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in_min[nr]));
+ return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in[nr][index]));
}
-static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
-
- struct it87_data *data = it87_update_device(dev);
- return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in_max[nr]));
-}
-
-static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
-
- struct it87_data *data = dev_get_drvdata(dev);
- unsigned long val;
-
- if (kstrtoul(buf, 10, &val) < 0)
- return -EINVAL;
-
- mutex_lock(&data->update_lock);
- data->in_min[nr] = in_to_reg(data, nr, val);
- it87_write_value(data, IT87_REG_VIN_MIN(nr),
- data->in_min[nr]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t set_in(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int index = sattr->index;
struct it87_data *data = dev_get_drvdata(dev);
unsigned long val;
@@ -508,140 +499,167 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
return -EINVAL;
mutex_lock(&data->update_lock);
- data->in_max[nr] = in_to_reg(data, nr, val);
- it87_write_value(data, IT87_REG_VIN_MAX(nr),
- data->in_max[nr]);
+ data->in[nr][index] = in_to_reg(data, nr, val);
+ it87_write_value(data,
+ index == 1 ? IT87_REG_VIN_MIN(nr)
+ : IT87_REG_VIN_MAX(nr),
+ data->in[nr][index]);
mutex_unlock(&data->update_lock);
return count;
}
-#define show_in_offset(offset) \
-static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
- show_in, NULL, offset);
-
-#define limit_in_offset(offset) \
-static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
- show_in_min, set_in_min, offset); \
-static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
- show_in_max, set_in_max, offset);
-
-show_in_offset(0);
-limit_in_offset(0);
-show_in_offset(1);
-limit_in_offset(1);
-show_in_offset(2);
-limit_in_offset(2);
-show_in_offset(3);
-limit_in_offset(3);
-show_in_offset(4);
-limit_in_offset(4);
-show_in_offset(5);
-limit_in_offset(5);
-show_in_offset(6);
-limit_in_offset(6);
-show_in_offset(7);
-limit_in_offset(7);
-show_in_offset(8);
+static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0);
+static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_in, set_in,
+ 0, 1);
+static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_in, set_in,
+ 0, 2);
+
+static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, 0);
+static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_in, set_in,
+ 1, 1);
+static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_in, set_in,
+ 1, 2);
+
+static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, 0);
+static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_in, set_in,
+ 2, 1);
+static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_in, set_in,
+ 2, 2);
+
+static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, 0);
+static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_in, set_in,
+ 3, 1);
+static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_in, set_in,
+ 3, 2);
+
+static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, 0);
+static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_in, set_in,
+ 4, 1);
+static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_in, set_in,
+ 4, 2);
+
+static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 5, 0);
+static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_in, set_in,
+ 5, 1);
+static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_in, set_in,
+ 5, 2);
+
+static SENSOR_DEVICE_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 6, 0);
+static SENSOR_DEVICE_ATTR_2(in6_min, S_IRUGO | S_IWUSR, show_in, set_in,
+ 6, 1);
+static SENSOR_DEVICE_ATTR_2(in6_max, S_IRUGO | S_IWUSR, show_in, set_in,
+ 6, 2);
+
+static SENSOR_DEVICE_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 7, 0);
+static SENSOR_DEVICE_ATTR_2(in7_min, S_IRUGO | S_IWUSR, show_in, set_in,
+ 7, 1);
+static SENSOR_DEVICE_ATTR_2(in7_max, S_IRUGO | S_IWUSR, show_in, set_in,
+ 7, 2);
+
+static SENSOR_DEVICE_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 8, 0);
/* 3 temperatures */
static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
- char *buf)
+ char *buf)
{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
-
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int index = sattr->index;
struct it87_data *data = it87_update_device(dev);
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
-}
-static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- struct it87_data *data = it87_update_device(dev);
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr]));
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr][index]));
}
-static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- struct it87_data *data = it87_update_device(dev);
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr]));
-}
-static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
-
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int index = sattr->index;
struct it87_data *data = dev_get_drvdata(dev);
long val;
+ u8 reg, regval;
if (kstrtol(buf, 10, &val) < 0)
return -EINVAL;
mutex_lock(&data->update_lock);
- data->temp_high[nr] = TEMP_TO_REG(val);
- it87_write_value(data, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- struct it87_data *data = dev_get_drvdata(dev);
- long val;
-
- if (kstrtol(buf, 10, &val) < 0)
- return -EINVAL;
+ switch (index) {
+ default:
+ case 1:
+ reg = IT87_REG_TEMP_LOW(nr);
+ break;
+ case 2:
+ reg = IT87_REG_TEMP_HIGH(nr);
+ break;
+ case 3:
+ regval = it87_read_value(data, IT87_REG_BEEP_ENABLE);
+ if (!(regval & 0x80)) {
+ regval |= 0x80;
+ it87_write_value(data, IT87_REG_BEEP_ENABLE, regval);
+ }
+ data->valid = 0;
+ reg = IT87_REG_TEMP_OFFSET[nr];
+ break;
+ }
- mutex_lock(&data->update_lock);
- data->temp_low[nr] = TEMP_TO_REG(val);
- it87_write_value(data, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
+ data->temp[nr][index] = TEMP_TO_REG(val);
+ it87_write_value(data, reg, data->temp[nr][index]);
mutex_unlock(&data->update_lock);
return count;
}
-#define show_temp_offset(offset) \
-static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
- show_temp, NULL, offset - 1); \
-static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
- show_temp_max, set_temp_max, offset - 1); \
-static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
- show_temp_min, set_temp_min, offset - 1);
-
-show_temp_offset(1);
-show_temp_offset(2);
-show_temp_offset(3);
-
-static ssize_t show_sensor(struct device *dev, struct device_attribute *attr,
- char *buf)
+
+static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 0, 1);
+static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 0, 2);
+static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp,
+ set_temp, 0, 3);
+static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 1, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 1, 2);
+static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp,
+ set_temp, 1, 3);
+static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 2, 0);
+static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 2, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+ 2, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp,
+ set_temp, 2, 3);
+
+static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct it87_data *data = it87_update_device(dev);
u8 reg = data->sensor; /* In case value is updated while used */
+ u8 extra = data->extra;
+ if ((has_temp_peci(data, nr) && (reg >> 6 == nr + 1))
+ || (has_temp_old_peci(data, nr) && (extra & 0x80)))
+ return sprintf(buf, "6\n"); /* Intel PECI */
if (reg & (1 << nr))
return sprintf(buf, "3\n"); /* thermal diode */
if (reg & (8 << nr))
return sprintf(buf, "4\n"); /* thermistor */
return sprintf(buf, "0\n"); /* disabled */
}
-static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+
+static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct it87_data *data = dev_get_drvdata(dev);
long val;
- u8 reg;
+ u8 reg, extra;
if (kstrtol(buf, 10, &val) < 0)
return -EINVAL;
@@ -649,33 +667,45 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
reg = it87_read_value(data, IT87_REG_TEMP_ENABLE);
reg &= ~(1 << nr);
reg &= ~(8 << nr);
+ if (has_temp_peci(data, nr) && (reg >> 6 == nr + 1 || val == 6))
+ reg &= 0x3f;
+ extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
+ if (has_temp_old_peci(data, nr) && ((extra & 0x80) || val == 6))
+ extra &= 0x7f;
if (val == 2) { /* backwards compatibility */
- dev_warn(dev, "Sensor type 2 is deprecated, please use 4 "
- "instead\n");
+ dev_warn(dev,
+ "Sensor type 2 is deprecated, please use 4 instead\n");
val = 4;
}
- /* 3 = thermal diode; 4 = thermistor; 0 = disabled */
+ /* 3 = thermal diode; 4 = thermistor; 6 = Intel PECI; 0 = disabled */
if (val == 3)
reg |= 1 << nr;
else if (val == 4)
reg |= 8 << nr;
+ else if (has_temp_peci(data, nr) && val == 6)
+ reg |= (nr + 1) << 6;
+ else if (has_temp_old_peci(data, nr) && val == 6)
+ extra |= 0x80;
else if (val != 0)
return -EINVAL;
mutex_lock(&data->update_lock);
data->sensor = reg;
+ data->extra = extra;
it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor);
+ if (has_temp_old_peci(data, nr))
+ it87_write_value(data, IT87_REG_TEMP_EXTRA, data->extra);
data->valid = 0; /* Force cache refresh */
mutex_unlock(&data->update_lock);
return count;
}
-#define show_sensor_offset(offset) \
-static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \
- show_sensor, set_sensor, offset - 1);
-show_sensor_offset(1);
-show_sensor_offset(2);
-show_sensor_offset(3);
+static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR, show_temp_type,
+ set_temp_type, 0);
+static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR, show_temp_type,
+ set_temp_type, 1);
+static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR, show_temp_type,
+ set_temp_type, 2);
/* 3 Fans */
@@ -692,25 +722,21 @@ static int pwm_mode(const struct it87_data *data, int nr)
}
static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
- char *buf)
+ char *buf)
{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
-
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int index = sattr->index;
+ int speed;
struct it87_data *data = it87_update_device(dev);
- return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
- DIV_FROM_REG(data->fan_div[nr])));
-}
-static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- struct it87_data *data = it87_update_device(dev);
- return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
- DIV_FROM_REG(data->fan_div[nr])));
+ speed = has_16bit_fans(data) ?
+ FAN16_FROM_REG(data->fan[nr][index]) :
+ FAN_FROM_REG(data->fan[nr][index],
+ DIV_FROM_REG(data->fan_div[nr]));
+ return sprintf(buf, "%d\n", speed);
}
+
static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -747,11 +773,13 @@ static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
return sprintf(buf, "%u\n", pwm_freq[index]);
}
-static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+
+static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int nr = sattr->nr;
+ int index = sattr->index;
struct it87_data *data = dev_get_drvdata(dev);
long val;
@@ -761,24 +789,36 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
return -EINVAL;
mutex_lock(&data->update_lock);
- reg = it87_read_value(data, IT87_REG_FAN_DIV);
- switch (nr) {
- case 0:
- data->fan_div[nr] = reg & 0x07;
- break;
- case 1:
- data->fan_div[nr] = (reg >> 3) & 0x07;
- break;
- case 2:
- data->fan_div[nr] = (reg & 0x40) ? 3 : 1;
- break;
+
+ if (has_16bit_fans(data)) {
+ data->fan[nr][index] = FAN16_TO_REG(val);
+ it87_write_value(data, IT87_REG_FAN_MIN[nr],
+ data->fan[nr][index] & 0xff);
+ it87_write_value(data, IT87_REG_FANX_MIN[nr],
+ data->fan[nr][index] >> 8);
+ } else {
+ reg = it87_read_value(data, IT87_REG_FAN_DIV);
+ switch (nr) {
+ case 0:
+ data->fan_div[nr] = reg & 0x07;
+ break;
+ case 1:
+ data->fan_div[nr] = (reg >> 3) & 0x07;
+ break;
+ case 2:
+ data->fan_div[nr] = (reg & 0x40) ? 3 : 1;
+ break;
+ }
+ data->fan[nr][index] =
+ FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+ it87_write_value(data, IT87_REG_FAN_MIN[nr],
+ data->fan[nr][index]);
}
- data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
- it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
+
static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -797,7 +837,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
old = it87_read_value(data, IT87_REG_FAN_DIV);
/* Save fan min limit */
- min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]));
+ min = FAN_FROM_REG(data->fan[nr][1], DIV_FROM_REG(data->fan_div[nr]));
switch (nr) {
case 0:
@@ -818,8 +858,8 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
it87_write_value(data, IT87_REG_FAN_DIV, val);
/* Restore fan min limit */
- data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
- it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]);
+ data->fan[nr][1] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+ it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan[nr][1]);
mutex_unlock(&data->update_lock);
return count;
@@ -843,8 +883,8 @@ static int check_trip_points(struct device *dev, int nr)
}
if (err) {
- dev_err(dev, "Inconsistent trip points, not switching to "
- "automatic mode\n");
+ dev_err(dev,
+ "Inconsistent trip points, not switching to automatic mode\n");
dev_err(dev, "Adjust the trip points and try again\n");
}
return err;
@@ -1092,118 +1132,106 @@ static ssize_t set_auto_temp(struct device *dev,
return count;
}
-#define show_fan_offset(offset) \
-static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
- show_fan, NULL, offset - 1); \
-static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_fan_min, set_fan_min, offset - 1); \
-static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
- show_fan_div, set_fan_div, offset - 1);
-
-show_fan_offset(1);
-show_fan_offset(2);
-show_fan_offset(3);
-
-#define show_pwm_offset(offset) \
-static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
- show_pwm_enable, set_pwm_enable, offset - 1); \
-static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
- show_pwm, set_pwm, offset - 1); \
-static DEVICE_ATTR(pwm##offset##_freq, \
- (offset == 1 ? S_IRUGO | S_IWUSR : S_IRUGO), \
- show_pwm_freq, (offset == 1 ? set_pwm_freq : NULL)); \
-static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels_temp, \
- S_IRUGO | S_IWUSR, show_pwm_temp_map, set_pwm_temp_map, \
- offset - 1); \
-static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_pwm, \
- S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm, \
- offset - 1, 0); \
-static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point2_pwm, \
- S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm, \
- offset - 1, 1); \
-static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point3_pwm, \
- S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm, \
- offset - 1, 2); \
-static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point4_pwm, \
- S_IRUGO, show_auto_pwm, NULL, offset - 1, 3); \
-static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_temp, \
- S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
- offset - 1, 1); \
-static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_temp_hyst, \
- S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
- offset - 1, 0); \
-static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point2_temp, \
- S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
- offset - 1, 2); \
-static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point3_temp, \
- S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
- offset - 1, 3); \
-static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point4_temp, \
- S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \
- offset - 1, 4);
-
-show_pwm_offset(1);
-show_pwm_offset(2);
-show_pwm_offset(3);
-
-/* A different set of callbacks for 16-bit fans */
-static ssize_t show_fan16(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- struct it87_data *data = it87_update_device(dev);
- return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan[nr]));
-}
-
-static ssize_t show_fan16_min(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- struct it87_data *data = it87_update_device(dev);
- return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan_min[nr]));
-}
-
-static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
- struct it87_data *data = dev_get_drvdata(dev);
- long val;
-
- if (kstrtol(buf, 10, &val) < 0)
- return -EINVAL;
-
- mutex_lock(&data->update_lock);
- data->fan_min[nr] = FAN16_TO_REG(val);
- it87_write_value(data, IT87_REG_FAN_MIN[nr],
- data->fan_min[nr] & 0xff);
- it87_write_value(data, IT87_REG_FANX_MIN[nr],
- data->fan_min[nr] >> 8);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-/*
- * We want to use the same sysfs file names as 8-bit fans, but we need
- * different variable names, so we have to use SENSOR_ATTR instead of
- * SENSOR_DEVICE_ATTR.
- */
-#define show_fan16_offset(offset) \
-static struct sensor_device_attribute sensor_dev_attr_fan##offset##_input16 \
- = SENSOR_ATTR(fan##offset##_input, S_IRUGO, \
- show_fan16, NULL, offset - 1); \
-static struct sensor_device_attribute sensor_dev_attr_fan##offset##_min16 \
- = SENSOR_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_fan16_min, set_fan16_min, offset - 1)
-
-show_fan16_offset(1);
-show_fan16_offset(2);
-show_fan16_offset(3);
-show_fan16_offset(4);
-show_fan16_offset(5);
+static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0);
+static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
+ 0, 1);
+static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, show_fan_div,
+ set_fan_div, 0);
+
+static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 1, 0);
+static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
+ 1, 1);
+static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, show_fan_div,
+ set_fan_div, 1);
+
+static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 2, 0);
+static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
+ 2, 1);
+static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR, show_fan_div,
+ set_fan_div, 2);
+
+static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 3, 0);
+static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
+ 3, 1);
+
+static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, 0);
+static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
+ 4, 1);
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
+ show_pwm_enable, set_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 0);
+static DEVICE_ATTR(pwm1_freq, S_IRUGO | S_IWUSR, show_pwm_freq, set_pwm_freq);
+static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO | S_IWUSR,
+ show_pwm_temp_map, set_pwm_temp_map, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR,
+ show_auto_pwm, set_auto_pwm, 0, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR,
+ show_auto_pwm, set_auto_pwm, 0, 1);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO | S_IWUSR,
+ show_auto_pwm, set_auto_pwm, 0, 2);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_pwm, S_IRUGO,
+ show_auto_pwm, NULL, 0, 3);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp, S_IRUGO | S_IWUSR,
+ show_auto_temp, set_auto_temp, 0, 1);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
+ show_auto_temp, set_auto_temp, 0, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_temp, S_IRUGO | S_IWUSR,
+ show_auto_temp, set_auto_temp, 0, 2);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_temp, S_IRUGO | S_IWUSR,
+ show_auto_temp, set_auto_temp, 0, 3);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_temp, S_IRUGO | S_IWUSR,
+ show_auto_temp, set_auto_temp, 0, 4);
+
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
+ show_pwm_enable, set_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 1);
+static DEVICE_ATTR(pwm2_freq, S_IRUGO, show_pwm_freq, NULL);
+static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IRUGO | S_IWUSR,
+ show_pwm_temp_map, set_pwm_temp_map, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR,
+ show_auto_pwm, set_auto_pwm, 1, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR,
+ show_auto_pwm, set_auto_pwm, 1, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO | S_IWUSR,
+ show_auto_pwm, set_auto_pwm, 1, 2);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point4_pwm, S_IRUGO,
+ show_auto_pwm, NULL, 1, 3);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp, S_IRUGO | S_IWUSR,
+ show_auto_temp, set_auto_