diff options
22 files changed, 346 insertions, 137 deletions
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt index aededdbc262b..f9a7c984274c 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.txt +++ b/Documentation/devicetree/bindings/eeprom/at24.txt @@ -27,6 +27,7 @@ Required properties: "atmel,24c256", "atmel,24c512", "atmel,24c1024", + "atmel,24c2048", If <manufacturer> is not "atmel", then a fallback must be used with the same <model> and "atmel" as manufacturer. diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index ef973a0343c7..b7cec17c3daf 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -33,7 +33,7 @@ i2c0: i2c@fff84000 { clock-frequency = <400000>; 24c512@50 { - compatible = "24c512"; + compatible = "atmel,24c512"; reg = <0x50>; pagesize = <128>; } diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt index 1e98c6b3a721..8b1e49cdce3f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt @@ -43,7 +43,7 @@ Example: reg = <0>; eeprom@50 { - compatible = "at,24c02"; + compatible = "atmel,24c02"; reg = <0x50>; }; }; @@ -54,7 +54,7 @@ Example: reg = <1>; eeprom@50 { - compatible = "at,24c02"; + compatible = "atmel,24c02"; reg = <0x50>; }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt index ccf6c86ed076..30ac6a60f041 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt @@ -54,7 +54,7 @@ Example: reg = <2>; eeprom@54 { - compatible = "at,24c08"; + compatible = "atmel,24c08"; reg = <0x54>; }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-owl.txt b/Documentation/devicetree/bindings/i2c/i2c-owl.txt index b743fe444e9f..54c05dbdb2e4 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-owl.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-owl.txt @@ -2,7 +2,9 @@ Actions Semiconductor Owl I2C controller Required properties: -- compatible : Should be "actions,s900-i2c". +- compatible : Should be one of the following: + - "actions,s700-i2c" for S700 SoC + - "actions,s900-i2c" for S900 SoC - reg : Offset and length of the register set for the device. - #address-cells : Should be 1. - #size-cells : Should be 0. diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt index 30c0485b167b..3ee5e8f6ee01 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt @@ -7,6 +7,7 @@ Required properties: "renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC. "renesas,i2c-r8a77470" if the device is a part of a R8A77470 SoC. "renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC. + "renesas,i2c-r8a774c0" if the device is a part of a R8A774C0 SoC. "renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC. "renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC. "renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC. diff --git a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt index d81b62643655..202602e6e837 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt @@ -8,6 +8,7 @@ Required properties: - "renesas,iic-r8a7744" (RZ/G1N) - "renesas,iic-r8a7745" (RZ/G1E) - "renesas,iic-r8a774a1" (RZ/G2M) + - "renesas,iic-r8a774c0" (RZ/G2E) - "renesas,iic-r8a7790" (R-Car H2) - "renesas,iic-r8a7791" (R-Car M2-W) - "renesas,iic-r8a7792" (R-Car V2H) @@ -16,6 +17,7 @@ Required properties: - "renesas,iic-r8a7795" (R-Car H3) - "renesas,iic-r8a7796" (R-Car M3-W) - "renesas,iic-r8a77965" (R-Car M3-N) + - "renesas,iic-r8a77990" (R-Car E3) - "renesas,iic-sh73a0" (SH-Mobile AG5) - "renesas,rcar-gen2-iic" (generic R-Car Gen2 or RZ/G1 compatible device) @@ -28,7 +30,13 @@ Required properties: the platform first followed by the generic R-Car version. - renesas,rmobile-iic must always follow. + When compatible with "renesas,rmobile-iic" it should + be the last compatibility string listed. + + The r8a77990 (R-Car E3) and r8a774c0 (RZ/G2E) + controllers are not considered compatible with + "renesas,rcar-gen3-iic" or "renesas,rmobile-iic" + due to the absence of automatic transmission registers. - reg : address start and address range size of device - interrupts : interrupt of device diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt index 3b5489966634..69240e189b01 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt @@ -26,6 +26,11 @@ Optional properties : - i2c-scl-falling-time-ns : Only for STM32F7, I2C SCL Falling time for the board (default: 10) I2C Timings are derived from these 2 values +- st,syscfg-fmp: Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG + whether Fast Mode Plus speed is selected by slave. + 1st cell : phandle to syscfg + 2nd cell : register offset within SYSCFG + 3rd cell : register bitmask for FMP bit Example : @@ -53,4 +58,5 @@ Example : clocks = <&rcc 1 CLK_I2C1>; pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>; pinctrl-names = "default"; + st,syscfg-fmp = <&syscfg 0x4 0x1>; }; diff --git a/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt index 0fbbc6970ec5..42bfc09c8918 100644 --- a/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt +++ b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt @@ -22,7 +22,7 @@ Example: #size-cells = <0>; eeprom@54 { - compatible = "at,24c08"; + compatible = "atmel,24c08"; reg = <0x54>; }; }; diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c index 51d34959709b..bf564391091f 100644 --- a/drivers/i2c/busses/i2c-axxia.c +++ b/drivers/i2c/busses/i2c-axxia.c @@ -12,6 +12,7 @@ */ #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/delay.h> #include <linux/err.h> #include <linux/i2c.h> #include <linux/init.h> @@ -25,6 +26,7 @@ #define I2C_XFER_TIMEOUT (msecs_to_jiffies(250)) #define I2C_STOP_TIMEOUT (msecs_to_jiffies(100)) #define FIFO_SIZE 8 +#define SEQ_LEN 2 #define GLOBAL_CONTROL 0x00 #define GLOBAL_MST_EN BIT(0) @@ -51,6 +53,7 @@ #define CMD_BUSY (1<<3) #define CMD_MANUAL (0x00 | CMD_BUSY) #define CMD_AUTO (0x01 | CMD_BUSY) +#define CMD_SEQUENCE (0x02 | CMD_BUSY) #define MST_RX_XFER 0x2c #define MST_TX_XFER 0x30 #define MST_ADDR_1 0x34 @@ -87,7 +90,9 @@ * axxia_i2c_dev - I2C device context * @base: pointer to register struct * @msg: pointer to current message - * @msg_xfrd: number of bytes transferred in msg + * @msg_r: pointer to current read message (sequence transfer) + * @msg_xfrd: number of bytes transferred in tx_fifo + * @msg_xfrd_r: number of bytes transferred in rx_fifo * @msg_err: error code for completed message * @msg_complete: xfer completion object * @dev: device reference @@ -98,7 +103,9 @@ struct axxia_i2c_dev { void __iomem *base; struct i2c_msg *msg; + struct i2c_msg *msg_r; size_t msg_xfrd; + size_t msg_xfrd_r; int msg_err; struct completion msg_complete; struct device *dev; @@ -227,14 +234,14 @@ static int i2c_m_recv_len(const struct i2c_msg *msg) */ static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev) { - struct i2c_msg *msg = idev->msg; + struct i2c_msg *msg = idev->msg_r; size_t rx_fifo_avail = readl(idev->base + MST_RX_FIFO); - int bytes_to_transfer = min(rx_fifo_avail, msg->len - idev->msg_xfrd); + int bytes_to_transfer = min(rx_fifo_avail, msg->len - idev->msg_xfrd_r); while (bytes_to_transfer-- > 0) { int c = readl(idev->base + MST_DATA); - if (idev->msg_xfrd == 0 && i2c_m_recv_len(msg)) { + if (idev->msg_xfrd_r == 0 && i2c_m_recv_len(msg)) { /* * Check length byte for SMBus block read */ @@ -247,7 +254,7 @@ static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev) msg->len = 1 + c; writel(msg->len, idev->base + MST_RX_XFER); } - msg->buf[idev->msg_xfrd++] = c; + msg->buf[idev->msg_xfrd_r++] = c; } return 0; @@ -287,7 +294,7 @@ static irqreturn_t axxia_i2c_isr(int irq, void *_dev) } /* RX FIFO needs service? */ - if (i2c_m_rd(idev->msg) && (status & MST_STATUS_RFL)) + if (i2c_m_rd(idev->msg_r) && (status & MST_STATUS_RFL)) axxia_i2c_empty_rx_fifo(idev); /* TX FIFO needs service? */ @@ -296,22 +303,7 @@ static irqreturn_t axxia_i2c_isr(int irq, void *_dev) i2c_int_disable(idev, MST_STATUS_TFL); } - if (status & MST_STATUS_SCC) { - /* Stop completed */ - i2c_int_disable(idev, ~MST_STATUS_TSS); - complete(&idev->msg_complete); - } else if (status & MST_STATUS_SNS) { - /* Transfer done */ - i2c_int_disable(idev, ~MST_STATUS_TSS); - if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len) - axxia_i2c_empty_rx_fifo(idev); - complete(&idev->msg_complete); - } else if (status & MST_STATUS_TSS) { - /* Transfer timeout */ - idev->msg_err = -ETIMEDOUT; - i2c_int_disable(idev, ~MST_STATUS_TSS); - complete(&idev->msg_complete); - } else if (unlikely(status & MST_STATUS_ERR)) { + if (unlikely(status & MST_STATUS_ERR)) { /* Transfer error */ i2c_int_disable(idev, ~0); if (status & MST_STATUS_AL) @@ -328,6 +320,24 @@ static irqreturn_t axxia_i2c_isr(int irq, void *_dev) readl(idev->base + MST_TX_BYTES_XFRD), readl(idev->base + MST_TX_XFER)); complete(&idev->msg_complete); + } else if (status & MST_STATUS_SCC) { + /* Stop completed */ + i2c_int_disable(idev, ~MST_STATUS_TSS); + complete(&idev->msg_complete); + } else if (status & MST_STATUS_SNS) { + /* Transfer done */ + i2c_int_disable(idev, ~MST_STATUS_TSS); + if (i2c_m_rd(idev->msg_r) && idev->msg_xfrd_r < idev->msg_r->len) + axxia_i2c_empty_rx_fifo(idev); + complete(&idev->msg_complete); + } else if (status & MST_STATUS_SS) { + /* Auto/Sequence transfer done */ + complete(&idev->msg_complete); + } else if (status & MST_STATUS_TSS) { + /* Transfer timeout */ + idev->msg_err = -ETIMEDOUT; + i2c_int_disable(idev, ~MST_STATUS_TSS); + complete(&idev->msg_complete); } out: @@ -337,17 +347,9 @@ out: return IRQ_HANDLED; } -static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg) +static void axxia_i2c_set_addr(struct axxia_i2c_dev *idev, struct i2c_msg *msg) { - u32 int_mask = MST_STATUS_ERR | MST_STATUS_SNS; - u32 rx_xfer, tx_xfer; u32 addr_1, addr_2; - unsigned long time_left; - unsigned int wt_value; - - idev->msg = msg; - idev->msg_xfrd = 0; - reinit_completion(&idev->msg_complete); if (i2c_m_ten(msg)) { /* 10-bit address @@ -367,6 +369,90 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg) addr_2 = 0; } + writel(addr_1, idev->base + MST_ADDR_1); + writel(addr_2, idev->base + MST_ADDR_2); +} + +/* The NAK interrupt will be sent _before_ issuing STOP command + * so the controller might still be busy processing it. No + * interrupt will be sent at the end so we have to poll for it + */ +static int axxia_i2c_handle_seq_nak(struct axxia_i2c_dev *idev) +{ + unsigned long timeout = jiffies + I2C_XFER_TIMEOUT; + + do { + if ((readl(idev->base + MST_COMMAND) & CMD_BUSY) == 0) + return 0; + usleep_range(1, 100); + } while (time_before(jiffies, timeout)); + + return -ETIMEDOUT; +} + +static int axxia_i2c_xfer_seq(struct axxia_i2c_dev *idev, struct i2c_msg msgs[]) +{ + u32 int_mask = MST_STATUS_ERR | MST_STATUS_SS | MST_STATUS_RFL; + u32 rlen = i2c_m_recv_len(&msgs[1]) ? I2C_SMBUS_BLOCK_MAX : msgs[1].len; + unsigned long time_left; + + axxia_i2c_set_addr(idev, &msgs[0]); + + writel(msgs[0].len, idev->base + MST_TX_XFER); + writel(rlen, idev->base + MST_RX_XFER); + + idev->msg = &msgs[0]; + idev->msg_r = &msgs[1]; + idev->msg_xfrd = 0; + idev->msg_xfrd_r = 0; + axxia_i2c_fill_tx_fifo(idev); + + writel(CMD_SEQUENCE, idev->base + MST_COMMAND); + + reinit_completion(&idev->msg_complete); + i2c_int_enable(idev, int_mask); + + time_left = wait_for_completion_timeout(&idev->msg_complete, + I2C_XFER_TIMEOUT); + + i2c_int_disable(idev, int_mask); + + axxia_i2c_empty_rx_fifo(idev); + + if (idev->msg_err == -ENXIO) { + if (axxia_i2c_handle_seq_nak(idev)) + axxia_i2c_init(idev); + } else if (readl(idev->base + MST_COMMAND) & CMD_BUSY) { + dev_warn(idev->dev, "busy after xfer\n"); + } + + if (time_left == 0) { + idev->msg_err = -ETIMEDOUT; + i2c_recover_bus(&idev->adapter); + axxia_i2c_init(idev); + } + + if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO) + axxia_i2c_init(idev); + + return idev->msg_err; +} + +static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg) +{ + u32 int_mask = MST_STATUS_ERR | MST_STATUS_SNS; + u32 rx_xfer, tx_xfer; + unsigned long time_left; + unsigned int wt_value; + + idev->msg = msg; + idev->msg_r = msg; + idev->msg_xfrd = 0; + idev->msg_xfrd_r = 0; + reinit_completion(&idev->msg_complete); + + axxia_i2c_set_addr(idev, msg); + if (i2c_m_rd(msg)) { /* I2C read transfer */ rx_xfer = i2c_m_recv_len(msg) ? I2C_SMBUS_BLOCK_MAX : msg->len; @@ -379,8 +465,6 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg) writel(rx_xfer, idev->base + MST_RX_XFER); writel(tx_xfer, idev->base + MST_TX_XFER); - writel(addr_1, idev->base + MST_ADDR_1); - writel(addr_2, idev->base + MST_ADDR_2); if (i2c_m_rd(msg)) int_mask |= MST_STATUS_RFL; @@ -445,6 +529,18 @@ static int axxia_i2c_stop(struct axxia_i2c_dev *idev) return 0; } +/* This function checks if the msgs[] array contains messages compatible with + * Sequence mode of operation. This mode assumes there will be exactly one + * write of non-zero length followed by exactly one read of non-zero length, + * both targeted at the same client device. + */ +static bool axxia_i2c_sequence_ok(struct i2c_msg msgs[], int num) +{ + return num == SEQ_LEN && !i2c_m_rd(&msgs[0]) && i2c_m_rd(&msgs[1]) && + msgs[0].len > 0 && msgs[0].len <= FIFO_SIZE && + msgs[1].len > 0 && msgs[0].addr == msgs[1].addr; +} + static int axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { @@ -453,6 +549,12 @@ axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) int ret = 0; idev->msg_err = 0; + + if (axxia_i2c_sequence_ok(msgs, num)) { + ret = axxia_i2c_xfer_seq(idev, msgs); + return ret ? : SEQ_LEN; + } + i2c_int_enable(idev, MST_STATUS_TSS); for (i = 0; ret == 0 && i < num; ++i) diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index 44deae78913e..ec6e69aa3a8e 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * BCM2835 master mode driver - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/clk.h> diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c index eb76b76f4754..82bcd9a78759 100644 --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c @@ -1,13 +1,7 @@ -/* - * Copyright (C) 2013 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Expose an I2C passthrough to the ChromeOS EC. - */ +// SPDX-License-Identifier: GPL-2.0+ +// Expose an I2C passthrough to the ChromeOS EC. +// +// Copyright (C) 2013 Google, Inc. #include <linux/module.h> #include <linux/i2c.h> diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 6f6e1dfe7cce..d78023d42a35 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -437,7 +437,7 @@ static int iic_wait_for_tc(struct ibm_iic_private* dev){ break; } - if (unlikely(signal_pending(current))){ + if (signal_pending(current)){ DBG("%d: poll interrupted\n", dev->idx); ret = -ERESTARTSYS; break; diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index c406700789e1..fa9ad53845d9 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -1090,7 +1090,8 @@ static int i2c_imx_probe(struct platform_device *pdev) /* Get I2C clock */ i2c_imx->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(i2c_imx->clk)) { - dev_err(&pdev->dev, "can't get I2C clock\n"); + if (PTR_ERR(i2c_imx->clk) != -EPROBE_DEFER) + dev_err(&pdev->dev, "can't get I2C clock\n"); return PTR_ERR(i2c_imx->clk); } diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index 0d1c3ec8cb40..02d23edb2fb1 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -75,6 +75,7 @@ /* PCI DIDs for the Intel SMBus Message Transport (SMT) Devices */ #define PCI_DEVICE_ID_INTEL_S1200_SMT0 0x0c59 #define PCI_DEVICE_ID_INTEL_S1200_SMT1 0x0c5a +#define PCI_DEVICE_ID_INTEL_CDF_SMT 0x18ac #define PCI_DEVICE_ID_INTEL_DNV_SMT 0x19ac #define PCI_DEVICE_ID_INTEL_AVOTON_SMT 0x1f15 @@ -181,6 +182,7 @@ struct ismt_priv { static const struct pci_device_id ismt_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CDF_SMT) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMT) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) }, { 0, } diff --git a/drivers/i2c/busses/i2c-owl.c b/drivers/i2c/busses/i2c-owl.c index 96b4572e6d9c..b6b5a495118b 100644 --- a/drivers/i2c/busses/i2c-owl.c +++ b/drivers/i2c/busses/i2c-owl.c @@ -475,6 +475,7 @@ disable_clk: } static const struct of_device_id owl_i2c_of_match[] = { + { .compatible = "actions,s700-i2c" }, { .compatible = "actions,s900-i2c" }, { /* sentinel */ } }; diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index f6f4ed8afc93..281113c28314 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -229,9 +229,9 @@ static u32 i2c_powermac_get_addr(struct i2c_adapter *adap, return (be32_to_cpup(prop) & 0xff) >> 1; /* Now handle some devices with missing "reg" properties */ - if (!strcmp(node->name, "cereal")) + if (of_node_name_eq(node, "cereal")) return 0x60; - else if (!strcmp(node->name, "deq")) + else if (of_node_name_eq(node, "deq")) return 0x34; dev_warn(&adap->dev, "No i2c address for %pOF\n", node); @@ -304,7 +304,7 @@ static bool i2c_powermac_get_type(struct i2c_adapter *adap, } /* Now look for known workarounds */ - if (!strcmp(node->name, "deq")) { + if (of_node_name_eq(node, "deq")) { /* Apple uses address 0x34 for TAS3001 and 0x35 for TAS3004 */ if (addr == 0x34) { snprintf(type, type_size, "MAC,tas3001"); @@ -331,7 +331,7 @@ static void i2c_powermac_register_devices(struct i2c_adapter *adap, * case we skip this function completely as the device-tree will * not contain anything useful. */ - if (!strcmp(adap->dev.of_node->name, "via-pmu")) + if (of_node_name_eq(adap->dev.of_node, "via-pmu")) return; for_each_child_of_node(adap->dev.of_node, node) { diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index a7a7a9c3bc7c..a64f2ff3cb49 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -800,6 +800,7 @@ static const struct sh_mobile_dt_config r8a7740_dt_config = { static const struct of_device_id sh_mobile_i2c_dt_ids[] = { { .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config }, { .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config }, + { .compatible = "renesas,iic-r8a774c0", .data = &fast_clock_dt_config }, { .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config }, { .compatible = "renesas,iic-r8a7791", .data = &fast_clock_dt_config }, { .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config }, @@ -808,6 +809,7 @@ static const struct of_device_id sh_mobile_i2c_dt_ids[] = { { .compatible = "renesas,rcar-gen2-iic", .data = &fast_clock_dt_config }, { .compatible = "renesas,iic-r8a7795", .data = &fast_clock_dt_config }, { .compatible = "renesas,rcar-gen3-iic", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-r8a77990", .data = &fast_clock_dt_config }, { .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config }, { .compatible = "renesas,rmobile-iic", .data = &default_dt_config }, {}, diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index 62d023e737d9..13e1213561d4 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -21,12 +21,16 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/iopoll.h> +#include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> #include <linux/reset.h> #include <linux/slab.h> @@ -163,6 +167,8 @@ #define STM32F7_SCLH_MAX BIT(8) #define STM32F7_SCLL_MAX BIT(8) +#define STM32F7_AUTOSUSPEND_DELAY (HZ / 100) + /** * struct stm32f7_i2c_spec - private i2c specification timing * @rate: I2C bus speed (Hz) @@ -276,6 +282,7 @@ struct stm32f7_i2c_msg { * slave) * @dma: dma data * @use_dma: boolean to know if dma is used in the current transfer + * @regmap: holds SYSCFG phandle for Fast Mode Plus bits */ struct stm32f7_i2c_dev { struct i2c_adapter adap; @@ -296,6 +303,7 @@ struct stm32f7_i2c_dev { bool master_mode; struct stm32_i2c_dma *dma; bool use_dma; + struct regmap *regmap; }; /** @@ -1545,15 +1553,13 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap, i2c_dev->msg_id = 0; f7_msg->smbus = false; - ret = clk_enable(i2c_dev->clk); - if (ret) { - dev_err(i2c_dev->dev, "Failed to enable clock\n"); + ret = pm_runtime_get_sync(i2c_dev->dev); + if (ret < 0) return ret; - } ret = stm32f7_i2c_wait_free_bus(i2c_dev); if (ret) - goto clk_free; + goto pm_free; stm32f7_i2c_xfer_msg(i2c_dev, msgs); @@ -1569,8 +1575,9 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap, ret = -ETIMEDOUT; } -clk_free: - clk_disable(i2c_dev->clk); +pm_free: + pm_runtime_mark_last_busy(i2c_dev->dev); + pm_runtime_put_autosuspend(i2c_dev->dev); return (ret < 0) ? ret : num; } @@ -1592,39 +1599,37 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, f7_msg->read_write = read_write; f7_msg->smbus = true; - ret = clk_enable(i2c_dev->clk); - if (ret) { - dev_err(i2c_dev->dev, "Failed to enable clock\n"); + ret = pm_runtime_get_sync(dev); + if (ret < 0) return ret; - } ret = stm32f7_i2c_wait_free_bus(i2c_dev); if (ret) - goto clk_free; + goto pm_free; ret = stm32f7_i2c_smbus_xfer_msg(i2c_dev, flags, command, data); if (ret) - goto clk_free; + goto pm_free; timeout = wait_for_completion_timeout(&i2c_dev->complete, i2c_dev->adap.timeout); ret = f7_msg->result; if (ret) - goto clk_free; + goto pm_free; if (!timeout) { dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr); if (i2c_dev->use_dma) dmaengine_terminate_all(dma->chan_using); ret = -ETIMEDOUT; - goto clk_free; + goto pm_free; } /* Check PEC */ if ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && read_write) { ret = stm32f7_i2c_smbus_check_pec(i2c_dev); if (ret) - goto clk_free; + goto pm_free; } if (read_write && size != I2C_SMBUS_QUICK) { @@ -1649,8 +1654,9 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, } } -clk_free: - clk_disable(i2c_dev->clk); +pm_free: + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); return ret; } @@ -1676,13 +1682,9 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave) if (ret) return ret; - if (!(stm32f7_i2c_is_slave_registered(i2c_dev))) { - ret = clk_enable(i2c_dev->clk); - if (ret) { - dev_err(dev, "Failed to enable clock\n"); - return ret; - } - } + ret = pm_runtime_get_sync(dev); + if (ret < 0) + return ret; if (id == 0) { /* Configure Own Address 1 */ @@ -1703,7 +1705,7 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave) oar2 &= ~STM32F7_I2C_OAR2_MASK; if (slave->flags & I2C_CLIENT_TEN) { ret = -EOPNOTSUPP; - goto exit; + goto pm_free; } oar2 |= STM32F7_I2C_OAR2_OA2_7(slave->addr); @@ -1712,7 +1714,7 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave) writel_relaxed(oar2, i2c_dev->base + STM32F7_I2C_OAR2); } else { ret = -ENODEV; - goto exit; + goto pm_free; } /* Enable ACK */ @@ -1723,11 +1725,10 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave) STM32F7_I2C_CR1_PE; stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask); - return 0; - -exit: - if (!(stm32f7_i2c_is_slave_registered(i2c_dev))) - clk_disable(i2c_dev->clk); + ret = 0; +pm_free: + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); return ret; } @@ -1745,6 +1746,10 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave) WARN_ON(!i2c_dev->slave[id]); + ret = pm_runtime_get_sync(i2c_dev->dev); + if (ret < 0) + return ret; + if (id == 0) { mask = STM32F7_I2C_OAR1_OA1EN; stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR1, mask); @@ -1755,14 +1760,39 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave) i2c_dev->slave[id] = NULL; - if (!(stm32f7_i2c_is_slave_registered(i2c_dev))) { + if (!(stm32f7_i2c_is_slave_registered(i2c_dev))) stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK); - clk_disable(i2c_dev->clk); - } + + pm_runtime_mark_last_busy(i2c_dev->dev); + pm_runtime_put_autosuspend(i2c_dev->dev); return 0; } +static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev, + struct stm32f7_i2c_dev *i2c_dev) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + u32 reg, mask; + + i2c_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg-fmp"); + if (IS_ERR(i2c_dev->regmap)) { + /* Optional */ + return 0; + } + + ret = of_property_read_u32_index(np, "st,syscfg-f |