diff options
56 files changed, 991 insertions, 612 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2b2407d9a6d0..0413f375c7b7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -280,19 +280,12 @@ and is between 256 and 4096 characters. It is defined in the file no: ACPI OperationRegions are not marked as reserved, no further checks are performed. - ad1848= [HW,OSS] - Format: <io>,<irq>,<dma>,<dma2>,<type> - add_efi_memmap [EFI; X86] Include EFI memory map in kernel's map of available physical RAM. advansys= [HW,SCSI] See header of drivers/scsi/advansys.c. - aedsp16= [HW,OSS] Audio Excel DSP 16 - Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq> - See also header of sound/oss/aedsp16.c. - agp= [AGP] { off | try_unsupported } off: disable AGP support @@ -311,6 +304,9 @@ and is between 256 and 4096 characters. It is defined in the file aic79xx= [HW,SCSI] See Documentation/scsi/aic79xx.txt. + ALSA [HW,ALSA] + See Documentation/sound/alsa/alsa-parameters.txt + alignment= [KNL,ARM] Allow the default userspace alignment fault handler behaviour to be specified. Bit 0 enables warnings, @@ -655,8 +651,6 @@ and is between 256 and 4096 characters. It is defined in the file Disable PIN 1 of APIC timer Can be useful to work around chipset bugs. - dmasound= [HW,OSS] Sound subsystem buffers - dma_debug=off If the kernel is compiled with DMA_API_DEBUG support, this option disables the debugging code at boot. @@ -1523,9 +1517,6 @@ and is between 256 and 4096 characters. It is defined in the file that the amount of memory usable for all allocations is not too small. - mpu401= [HW,OSS] - Format: <io>,<irq> - MTD_Partition= [MTD] Format: <name>,<region-number>,<size>,<offset> @@ -1849,9 +1840,6 @@ and is between 256 and 4096 characters. It is defined in the file For example, to override I2C bus2: omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100 - opl3= [HW,OSS] - Format: <io> - oprofile.timer= [HW] Use timer interrupt instead of performance counters @@ -1863,6 +1851,9 @@ and is between 256 and 4096 characters. It is defined in the file perfmon on Intel CPUs instead of the CPU specific event set. + OSS [HW,OSS] + See Documentation/sound/oss/oss-parameters.txt + osst= [HW,SCSI] SCSI Tape Driver Format: <buffer_size>,<write_threshold> See also Documentation/scsi/st.txt. @@ -1899,9 +1890,6 @@ and is between 256 and 4096 characters. It is defined in the file Currently this function knows 686a and 8231 chips. Format: [spp|ps2|epp|ecp|ecpepp] - pas2= [HW,OSS] Format: - <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16> - pas16= [HW,SCSI] See header of drivers/scsi/pas16.c. @@ -2171,10 +2159,6 @@ and is between 256 and 4096 characters. It is defined in the file [HW,MOUSE] Controls Logitech smartscroll autorepeat. 0 = disabled, 1 = enabled (default). - pss= [HW,OSS] Personal Sound System (ECHO ESC614) - Format: - <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq> - pt. [PARIDE] See Documentation/blockdev/paride.txt. @@ -2383,128 +2367,6 @@ and is between 256 and 4096 characters. It is defined in the file 1: Fast pin select (default) 2: ATC IRMode - snd-ad1816a= [HW,ALSA] - - snd-ad1848= [HW,ALSA] - - snd-ali5451= [HW,ALSA] - - snd-als100= [HW,ALSA] - - snd-als4000= [HW,ALSA] - - snd-azt2320= [HW,ALSA] - - snd-cmi8330= [HW,ALSA] - - snd-cmipci= [HW,ALSA] - - snd-cs4231= [HW,ALSA] - - snd-cs4232= [HW,ALSA] - - snd-cs4236= [HW,ALSA] - - snd-cs4281= [HW,ALSA] - - snd-cs46xx= [HW,ALSA] - - snd-dt019x= [HW,ALSA] - - snd-dummy= [HW,ALSA] - - snd-emu10k1= [HW,ALSA] - - snd-ens1370= [HW,ALSA] - - snd-ens1371= [HW,ALSA] - - snd-es968= [HW,ALSA] - - snd-es1688= [HW,ALSA] - - snd-es18xx= [HW,ALSA] - - snd-es1938= [HW,ALSA] - - snd-es1968= [HW,ALSA] - - snd-fm801= [HW,ALSA] - - snd-gusclassic= [HW,ALSA] - - snd-gusextreme= [HW,ALSA] - - snd-gusmax= [HW,ALSA] - - snd-hdsp= [HW,ALSA] - - snd-ice1712= [HW,ALSA] - - snd-intel8x0= [HW,ALSA] - - snd-interwave= [HW,ALSA] - - snd-interwave-stb= - [HW,ALSA] - - snd-korg1212= [HW,ALSA] - - snd-maestro3= [HW,ALSA] - - snd-mpu401= [HW,ALSA] - - snd-mtpav= [HW,ALSA] - - snd-nm256= [HW,ALSA] - - snd-opl3sa2= [HW,ALSA] - - snd-opti92x-ad1848= - [HW,ALSA] - - snd-opti92x-cs4231= - [HW,ALSA] - - snd-opti93x= [HW,ALSA] - - snd-pmac= [HW,ALSA] - - snd-rme32= [HW,ALSA] - - snd-rme96= [HW,ALSA] - - snd-rme9652= [HW,ALSA] - - snd-sb8= [HW,ALSA] - - snd-sb16= [HW,ALSA] - - snd-sbawe= [HW,ALSA] - - snd-serial= [HW,ALSA] - - snd-sgalaxy= [HW,ALSA] - - snd-sonicvibes= [HW,ALSA] - - snd-sun-amd7930= - [HW,ALSA] - - snd-sun-cs4231= [HW,ALSA] - - snd-trident= [HW,ALSA] - - snd-usb-audio= [HW,ALSA,USB] - - snd-via82xx= [HW,ALSA] - - snd-virmidi= [HW,ALSA] - - snd-wavefront= [HW,ALSA] - - snd-ymfpci= [HW,ALSA] - softlockup_panic= [KNL] Should the soft-lockup detector generate panics. @@ -2519,9 +2381,6 @@ and is between 256 and 4096 characters. It is defined in the file spia_pedr= spia_peddr= - sscape= [HW,OSS] - Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq> - st= [HW,SCSI] SCSI tape parameters (buffers, etc.) See Documentation/scsi/st.txt. @@ -2661,10 +2520,6 @@ and is between 256 and 4096 characters. It is defined in the file to facilitate early boot debugging. See also Documentation/trace/events.txt - trix= [HW,OSS] MediaTrix AudioTrix Pro - Format: - <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq> - tsc= Disable clocksource-must-verify flag for TSC. Format: <string> [x86] reliable: mark tsc clocksource as reliable, this @@ -2681,12 +2536,6 @@ and is between 256 and 4096 characters. It is defined in the file u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter See header of drivers/scsi/u14-34f.c. - uart401= [HW,OSS] - Format: <io>,<irq> - - uart6850= [HW,OSS] - Format: <io>,<irq> - uhash_entries= [KNL,NET] Set number of hash buckets for UDP/UDP-Lite connections @@ -2852,9 +2701,6 @@ and is between 256 and 4096 characters. It is defined in the file overridden by individual drivers. 0 will hide cursors, 1 will display them. - waveartist= [HW,OSS] - Format: <io>,<irq>,<dma>,<dma2> - wd33c93= [HW,SCSI] See header of drivers/scsi/wd33c93.c. @@ -2887,5 +2733,4 @@ ______________________________________________________________________ TODO: - Add documentation for ALSA options. Add more DRM drivers. diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt index 07301de12cc4..7fcd1ad96fcc 100644 --- a/Documentation/sound/alsa/Procfile.txt +++ b/Documentation/sound/alsa/Procfile.txt @@ -103,6 +103,8 @@ card*/pcm*/xrun_debug bit 2 = Enable additional jiffies check bit 3 = Log hwptr update at each period interrupt bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr() + bit 5 = Show last 10 positions on error + bit 6 = Do above only once When the bit 0 is set, the driver will show the messages to kernel log when an xrun is detected. The debug message is @@ -122,6 +124,12 @@ card*/pcm*/xrun_debug Bits 3 and 4 are for logging the hwptr records. Note that these will give flood of kernel messages. + When bit 5 is set, the driver logs the last 10 xrun errors and + the proc file shows each jiffies, position, period_size, + buffer_size, old_hw_ptr, and hw_ptr_base values. + + When bit 6 is set, the full xrun log is shown only once. + card*/pcm*/sub*/info The general information of this PCM sub-stream. diff --git a/Documentation/sound/alsa/alsa-parameters.txt b/Documentation/sound/alsa/alsa-parameters.txt new file mode 100644 index 000000000000..0fa40679b080 --- /dev/null +++ b/Documentation/sound/alsa/alsa-parameters.txt @@ -0,0 +1,135 @@ + ALSA Kernel Parameters + ~~~~~~~~~~~~~~~~~~~~~~ + +See Documentation/kernel-parameters.txt for general information on +specifying module parameters. + +This document may not be entirely up to date and comprehensive. The command +"modinfo -p ${modulename}" shows a current list of all parameters of a loadable +module. Loadable modules, after being loaded into the running kernel, also +reveal their parameters in /sys/module/${modulename}/parameters/. Some of these +parameters may be changed at runtime by the command +"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}". + + + snd-ad1816a= [HW,ALSA] + + snd-ad1848= [HW,ALSA] + + snd-ali5451= [HW,ALSA] + + snd-als100= [HW,ALSA] + + snd-als4000= [HW,ALSA] + + snd-azt2320= [HW,ALSA] + + snd-cmi8330= [HW,ALSA] + + snd-cmipci= [HW,ALSA] + + snd-cs4231= [HW,ALSA] + + snd-cs4232= [HW,ALSA] + + snd-cs4236= [HW,ALSA] + + snd-cs4281= [HW,ALSA] + + snd-cs46xx= [HW,ALSA] + + snd-dt019x= [HW,ALSA] + + snd-dummy= [HW,ALSA] + + snd-emu10k1= [HW,ALSA] + + snd-ens1370= [HW,ALSA] + + snd-ens1371= [HW,ALSA] + + snd-es968= [HW,ALSA] + + snd-es1688= [HW,ALSA] + + snd-es18xx= [HW,ALSA] + + snd-es1938= [HW,ALSA] + + snd-es1968= [HW,ALSA] + + snd-fm801= [HW,ALSA] + + snd-gusclassic= [HW,ALSA] + + snd-gusextreme= [HW,ALSA] + + snd-gusmax= [HW,ALSA] + + snd-hdsp= [HW,ALSA] + + snd-ice1712= [HW,ALSA] + + snd-intel8x0= [HW,ALSA] + + snd-interwave= [HW,ALSA] + + snd-interwave-stb= + [HW,ALSA] + + snd-korg1212= [HW,ALSA] + + snd-maestro3= [HW,ALSA] + + snd-mpu401= [HW,ALSA] + + snd-mtpav= [HW,ALSA] + + snd-nm256= [HW,ALSA] + + snd-opl3sa2= [HW,ALSA] + + snd-opti92x-ad1848= + [HW,ALSA] + + snd-opti92x-cs4231= + [HW,ALSA] + + snd-opti93x= [HW,ALSA] + + snd-pmac= [HW,ALSA] + + snd-rme32= [HW,ALSA] + + snd-rme96= [HW,ALSA] + + snd-rme9652= [HW,ALSA] + + snd-sb8= [HW,ALSA] + + snd-sb16= [HW,ALSA] + + snd-sbawe= [HW,ALSA] + + snd-serial= [HW,ALSA] + + snd-sgalaxy= [HW,ALSA] + + snd-sonicvibes= [HW,ALSA] + + snd-sun-amd7930= + [HW,ALSA] + + snd-sun-cs4231= [HW,ALSA] + + snd-trident= [HW,ALSA] + + snd-usb-audio= [HW,ALSA,USB] + + snd-via82xx= [HW,ALSA] + + snd-virmidi= [HW,ALSA] + + snd-wavefront= [HW,ALSA] + + snd-ymfpci= [HW,ALSA] diff --git a/Documentation/sound/oss/oss-parameters.txt b/Documentation/sound/oss/oss-parameters.txt new file mode 100644 index 000000000000..3ab391e7c295 --- /dev/null +++ b/Documentation/sound/oss/oss-parameters.txt @@ -0,0 +1,51 @@ + OSS Kernel Parameters + ~~~~~~~~~~~~~~~~~~~~~ + +See Documentation/kernel-parameters.txt for general information on +specifying module parameters. + +This document may not be entirely up to date and comprehensive. The command +"modinfo -p ${modulename}" shows a current list of all parameters of a loadable +module. Loadable modules, after being loaded into the running kernel, also +reveal their parameters in /sys/module/${modulename}/parameters/. Some of these +parameters may be changed at runtime by the command +"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}". + + + ad1848= [HW,OSS] + Format: <io>,<irq>,<dma>,<dma2>,<type> + + aedsp16= [HW,OSS] Audio Excel DSP 16 + Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq> + See also header of sound/oss/aedsp16.c. + + dmasound= [HW,OSS] Sound subsystem buffers + + mpu401= [HW,OSS] + Format: <io>,<irq> + + opl3= [HW,OSS] + Format: <io> + + pas2= [HW,OSS] Format: + <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16> + + pss= [HW,OSS] Personal Sound System (ECHO ESC614) + Format: + <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq> + + sscape= [HW,OSS] + Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq> + + trix= [HW,OSS] MediaTrix AudioTrix Pro + Format: + <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq> + + uart401= [HW,OSS] + Format: <io>,<irq> + + uart6850= [HW,OSS] + Format: <io>,<irq> + + waveartist= [HW,OSS] + Format: <io>,<irq>,<dma>,<dma2> diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c index ae42695c3597..68142df76608 100644 --- a/arch/um/drivers/hostaudio_kern.c +++ b/arch/um/drivers/hostaudio_kern.c @@ -8,6 +8,7 @@ #include "linux/slab.h" #include "linux/sound.h" #include "linux/soundcard.h" +#include "linux/smp_lock.h" #include "asm/uaccess.h" #include "init.h" #include "os.h" @@ -198,7 +199,10 @@ static int hostaudio_open(struct inode *inode, struct file *file) if (file->f_mode & FMODE_WRITE) w = 1; + lock_kernel(); ret = os_open_file(dsp, of_set_rw(OPENFLAGS(), r, w), 0); + unlock_kernel(); + if (ret < 0) { kfree(state); return ret; @@ -254,7 +258,9 @@ static int hostmixer_open_mixdev(struct inode *inode, struct file *file) if (file->f_mode & FMODE_WRITE) w = 1; + lock_kernel(); ret = os_open_file(mixer, of_set_rw(OPENFLAGS(), r, w), 0); + unlock_kernel(); if (ret < 0) { printk(KERN_ERR "hostaudio_open_mixdev failed to open '%s', " diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index b91115f84b13..1f48ceb55a77 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -61,7 +61,7 @@ DECLARE_UAC_AC_HEADER_DESCRIPTOR(2); #define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \ + UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0)) /* B.3.2 Class-Specific AC Interface Descriptor */ -static struct uac_ac_header_descriptor_v1_2 ac_header_desc = { +static struct uac1_ac_header_descriptor_2 ac_header_desc = { .bLength = UAC_DT_AC_HEADER_LENGTH, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_HEADER, @@ -125,7 +125,7 @@ static struct usb_audio_control_selector feature_unit = { }; #define OUTPUT_TERMINAL_ID 3 -static struct uac_output_terminal_descriptor_v1 output_terminal_desc = { +static struct uac1_output_terminal_descriptor output_terminal_desc = { .bLength = UAC_DT_OUTPUT_TERMINAL_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_OUTPUT_TERMINAL, @@ -155,7 +155,7 @@ static struct usb_interface_descriptor as_interface_alt_1_desc = { }; /* B.4.2 Class-Specific AS Interface Descriptor */ -static struct uac_as_header_descriptor_v1 as_header_desc = { +static struct uac1_as_header_descriptor as_header_desc = { .bLength = UAC_DT_AS_HEADER_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_AS_GENERAL, diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 2b56ce621852..b7bf88019b06 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -238,7 +238,7 @@ static const struct usb_interface_descriptor ac_interface_desc = { }; /* B.3.2 Class-Specific AC Interface Descriptor */ -static const struct uac_ac_header_descriptor_v1_1 ac_header_desc = { +static const struct uac1_ac_header_descriptor_1 ac_header_desc = { .bLength = UAC_DT_AC_HEADER_SIZE(1), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = USB_MS_HEADER, diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h index 383b94ba8c20..964cb603f7c7 100644 --- a/include/linux/usb/audio-v2.h +++ b/include/linux/usb/audio-v2.h @@ -18,6 +18,21 @@ /* v1.0 and v2.0 of this standard have many things in common. For the rest * of the definitions, please refer to audio.h */ +/* + * bmControl field decoders + * + * From the USB Audio spec v2.0: + * + * bmaControls() is a (ch+1)-element array of 4-byte bitmaps, + * each containing a set of bit pairs. If a Control is present, + * it must be Host readable. If a certain Control is not + * present then the bit pair must be set to 0b00. + * If a Control is present but read-only, the bit pair must be + * set to 0b01. If a Control is also Host programmable, the bit + * pair must be set to 0b11. The value 0b10 is not allowed. + * + */ + static inline bool uac2_control_is_readable(u32 bmControls, u8 control) { return (bmControls >> (control * 2)) & 0x1; @@ -121,7 +136,7 @@ struct uac2_feature_unit_descriptor { /* 4.9.2 Class-Specific AS Interface Descriptor */ -struct uac_as_header_descriptor_v2 { +struct uac2_as_header_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bDescriptorSubtype; diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index c51200c715e5..a54b8255d75f 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -39,8 +39,8 @@ #define UAC_MIXER_UNIT 0x04 #define UAC_SELECTOR_UNIT 0x05 #define UAC_FEATURE_UNIT 0x06 -#define UAC_PROCESSING_UNIT_V1 0x07 -#define UAC_EXTENSION_UNIT_V1 0x08 +#define UAC1_PROCESSING_UNIT 0x07 +#define UAC1_EXTENSION_UNIT 0x08 /* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ #define UAC_AS_GENERAL 0x01 @@ -151,7 +151,7 @@ /* Terminal Control Selectors */ /* 4.3.2 Class-Specific AC Interface Descriptor */ -struct uac_ac_header_descriptor_v1 { +struct uac1_ac_header_descriptor { __u8 bLength; /* 8 + n */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ @@ -165,7 +165,7 @@ struct uac_ac_header_descriptor_v1 { /* As above, but more useful for defining your own descriptors: */ #define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ -struct uac_ac_header_descriptor_v1_##n { \ +struct uac1_ac_header_descriptor_##n { \ __u8 bLength; \ __u8 bDescriptorType; \ __u8 bDescriptorSubtype; \ @@ -205,7 +205,7 @@ struct uac_input_terminal_descriptor { #define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01 /* 4.3.2.2 Output Terminal Descriptor */ -struct uac_output_terminal_descriptor_v1 { +struct uac1_output_terminal_descriptor { __u8 bLength; /* in bytes: 9 */ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ @@ -395,7 +395,7 @@ static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_desc } /* 4.5.2 Class-Specific AS Interface Descriptor */ -struct uac_as_header_descriptor_v1 { +struct uac1_as_header_descriptor { __u8 bLength; /* in bytes: 7 */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ __u8 bDescriptorSubtype; /* AS_GENERAL */ diff --git a/include/sound/asound.h b/include/sound/asound.h index 9f1eecf99e6b..a1803ecea34d 100644 --- a/include/sound/asound.h +++ b/include/sound/asound.h @@ -212,7 +212,11 @@ typedef int __bitwise snd_pcm_format_t; #define SNDRV_PCM_FORMAT_S18_3BE ((__force snd_pcm_format_t) 41) /* in three bytes */ #define SNDRV_PCM_FORMAT_U18_3LE ((__force snd_pcm_format_t) 42) /* in three bytes */ #define SNDRV_PCM_FORMAT_U18_3BE ((__force snd_pcm_format_t) 43) /* in three bytes */ -#define SNDRV_PCM_FORMAT_LAST SNDRV_PCM_FORMAT_U18_3BE +#define SNDRV_PCM_FORMAT_G723_24 ((__force snd_pcm_format_t) 44) /* 8 samples in 3 bytes */ +#define SNDRV_PCM_FORMAT_G723_24_1B ((__force snd_pcm_format_t) 45) /* 1 sample in 1 byte */ +#define SNDRV_PCM_FORMAT_G723_40 ((__force snd_pcm_format_t) 46) /* 8 Samples in 5 bytes */ +#define SNDRV_PCM_FORMAT_G723_40_1B ((__force snd_pcm_format_t) 47) /* 1 sample in 1 byte */ +#define SNDRV_PCM_FORMAT_LAST SNDRV_PCM_FORMAT_G723_40_1B #ifdef SNDRV_LITTLE_ENDIAN #define SNDRV_PCM_FORMAT_S16 SNDRV_PCM_FORMAT_S16_LE diff --git a/include/sound/pcm.h b/include/sound/pcm.h index dd76cdede64d..304025b23520 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -174,6 +174,10 @@ struct snd_pcm_ops { #define SNDRV_PCM_FMTBIT_U18_3LE (1ULL << SNDRV_PCM_FORMAT_U18_3LE) #define SNDRV_PCM_FMTB |