diff options
| -rw-r--r-- | arch/mips/alchemy/Kconfig | 8 | ||||
| -rw-r--r-- | arch/mips/alchemy/Platform | 7 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/Makefile | 1 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/db1300.c | 787 | ||||
| -rw-r--r-- | arch/mips/alchemy/devboards/prom.c | 4 | ||||
| -rw-r--r-- | arch/mips/boot/compressed/uart-alchemy.c | 5 | ||||
| -rw-r--r-- | arch/mips/configs/db1300_defconfig | 391 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-db1x00/bcsr.h | 34 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-db1x00/db1300.h | 40 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-db1x00/irq.h | 23 | ||||
| -rw-r--r-- | drivers/pcmcia/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/pcmcia/db1xxx_ss.c | 26 | ||||
| -rw-r--r-- | drivers/video/au1200fb.c | 36 | ||||
| -rw-r--r-- | sound/soc/au1x/Kconfig | 8 | ||||
| -rw-r--r-- | sound/soc/au1x/db1200.c | 43 |
15 files changed, 1398 insertions, 19 deletions
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 766badaef3b0..f9a13beada4a 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -49,6 +49,14 @@ config MIPS_DB1200 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK +config MIPS_DB1300 + bool "NetLogic DB1300 board" + select ALCHEMY_GPIOINT_AU1300 + select DMA_COHERENT + select MIPS_DISABLE_OBSOLETE_IDE + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK + config MIPS_DB1500 bool "Alchemy DB1500 board" select ALCHEMY_GPIOINT_AU1000 diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform index 2920af9c2569..4d13e21eaf83 100644 --- a/arch/mips/alchemy/Platform +++ b/arch/mips/alchemy/Platform @@ -68,6 +68,13 @@ cflags-$(CONFIG_MIPS_DB1200) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000 # +# NetLogic DBAu1300 development platform +# +platform-$(CONFIG_MIPS_DB1300) += alchemy/devboards/ +cflags-$(CONFIG_MIPS_DB1300) += -I$(srctree)/arch/mips/include/asm/mach-db1x00 +load-$(CONFIG_MIPS_DB1300) += 0xffffffff80100000 + +# # 4G-Systems eval board # platform-$(CONFIG_MIPS_MTX1) += alchemy/mtx-1/ diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile index 5afaf944868f..2eb75c92a583 100644 --- a/arch/mips/alchemy/devboards/Makefile +++ b/arch/mips/alchemy/devboards/Makefile @@ -11,5 +11,6 @@ obj-$(CONFIG_MIPS_PB1550) += pb1550/ obj-$(CONFIG_MIPS_DB1000) += db1x00/ obj-$(CONFIG_MIPS_DB1100) += db1x00/ obj-$(CONFIG_MIPS_DB1200) += db1200/ +obj-$(CONFIG_MIPS_DB1300) += db1300.o obj-$(CONFIG_MIPS_DB1500) += db1x00/ obj-$(CONFIG_MIPS_DB1550) += db1x00/ diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c new file mode 100644 index 000000000000..c41788c59278 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1300.c @@ -0,0 +1,787 @@ +/* + * DBAu1300 init and platform device setup. + * + * (c) 2009 Manuel Lauss <manuel.lauss@googlemail.com> + */ + +#include <linux/dma-mapping.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/init.h> +#include <linux/input.h> /* KEY_* codes */ +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/ata_platform.h> +#include <linux/mmc/host.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/smsc911x.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1100_mmc.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1xxx_psc.h> +#include <asm/mach-db1x00/db1300.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/mach-au1x00/prom.h> + +#include "platform.h" + +static struct i2c_board_info db1300_i2c_devs[] __initdata = { + { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec */ + { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ +}; + +/* multifunction pins to assign to GPIO controller */ +static int db1300_gpio_pins[] __initdata = { + AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1, + AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX, + AU1300_PIN_EXTCLK1, + -1, /* terminator */ +}; + +/* multifunction pins to assign to device functions */ +static int db1300_dev_pins[] __initdata = { + /* wake-from-str pins 0-3 */ + AU1300_PIN_WAKE0, + /* external clock sources for PSC0 */ + AU1300_PIN_EXTCLK0, + /* 8bit MMC interface on SD0: 6-9 */ + AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6, + AU1300_PIN_SD0DAT7, + /* UART1 pins: 11-18 */ + AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR, + AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR, + AU1300_PIN_U1RX, AU1300_PIN_U1TX, + /* UART0 pins: 19-24 */ + AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR, + AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR, + /* UART2: 25-26 */ + AU1300_PIN_U2RX, AU1300_PIN_U2TX, + /* UART3: 27-28 */ + AU1300_PIN_U3RX, AU1300_PIN_U3TX, + /* LCD controller PWMs, ext pixclock: 30-31 */ + AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN, + /* SD1 interface: 32-37 */ + AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2, + AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK, + /* SD2 interface: 38-43 */ + AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2, + AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK, + /* PSC0/1 clocks: 44-45 */ + AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK, + /* PSCs: 46-49/50-53/54-57/58-61 */ + AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0, + AU1300_PIN_PSC0D1, + AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0, + AU1300_PIN_PSC1D1, + AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2D0, + AU1300_PIN_PSC2D1, + AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0, + AU1300_PIN_PSC3D1, + /* PCMCIA interface: 62-70 */ + AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16, + AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT, + AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW, + /* camera interface H/V sync inputs: 71-72 */ + AU1300_PIN_CIMLS, AU1300_PIN_CIMFS, + /* PSC2/3 clocks: 73-74 */ + AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK, + -1, /* terminator */ +}; + +static void __init db1300_gpio_config(void) +{ + int *i; + + i = &db1300_dev_pins[0]; + while (*i != -1) + au1300_pinfunc_to_dev(*i++); + + i = &db1300_gpio_pins[0]; + while (*i != -1) + au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */ + + au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX); +} + +char *get_system_type(void) +{ + return "DB1300"; +} + +/**********************************************************************/ + +static void au1300_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long ioaddr = (unsigned long)this->IO_ADDR_W; + + ioaddr &= 0xffffff00; + + if (ctrl & NAND_CLE) { + ioaddr += MEM_STNAND_CMD; + } else if (ctrl & NAND_ALE) { + ioaddr += MEM_STNAND_ADDR; + } else { + /* assume we want to r/w real data by default */ + ioaddr += MEM_STNAND_DATA; + } + this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr; + if (cmd != NAND_CMD_NONE) { + __raw_writeb(cmd, this->IO_ADDR_W); + wmb(); + } +} + +static int au1300_nand_device_ready(struct mtd_info *mtd) +{ + return __raw_readl((void __iomem *)MEM_STSTAT) & 1; +} + +static const char *db1300_part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition db1300_nand_parts[] = { + { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024, + }, + { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +struct platform_nand_data db1300_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(db1300_nand_parts), + .partitions = db1300_nand_parts, + .chip_delay = 20, + .part_probe_types = db1300_part_probes, + }, + .ctrl = { + .dev_ready = au1300_nand_device_ready, + .cmd_ctrl = au1300_nand_cmd_ctrl, + }, +}; + +static struct resource db1300_nand_res[] = { + [0] = { + .start = DB1300_NAND_PHYS_ADDR, + .end = DB1300_NAND_PHYS_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device db1300_nand_dev = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(db1300_nand_res), + .resource = db1300_nand_res, + .id = -1, + .dev = { + .platform_data = &db1300_nand_platdata, + } +}; + +/**********************************************************************/ + +static struct resource db1300_eth_res[] = { + [0] = { + .start = DB1300_ETH_PHYS_ADDR, + .end = DB1300_ETH_PHYS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1300_ETH_INT, + .end = DB1300_ETH_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config db1300_eth_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, +}; + +static struct platform_device db1300_eth_dev = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(db1300_eth_res), + .resource = db1300_eth_res, + .dev = { + .platform_data = &db1300_eth_config, + }, +}; + +/**********************************************************************/ + +static struct resource au1300_psc1_res[] = { + [0] = { + .start = AU1300_PSC1_PHYS_ADDR, + .end = AU1300_PSC1_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_PSC1_INT, + .end = AU1300_PSC1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_PSC1_TX, + .end = AU1300_DSCR_CMD0_PSC1_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_PSC1_RX, + .end = AU1300_DSCR_CMD0_PSC1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_ac97_dev = { + .name = "au1xpsc_ac97", + .id = 1, /* PSC ID. match with AC97 codec ID! */ + .num_resources = ARRAY_SIZE(au1300_psc1_res), + .resource = au1300_psc1_res, +}; + +/**********************************************************************/ + +static struct resource au1300_psc2_res[] = { + [0] = { + .start = AU1300_PSC2_PHYS_ADDR, + .end = AU1300_PSC2_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_PSC2_INT, + .end = AU1300_PSC2_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_PSC2_TX, + .end = AU1300_DSCR_CMD0_PSC2_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_PSC2_RX, + .end = AU1300_DSCR_CMD0_PSC2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_i2s_dev = { + .name = "au1xpsc_i2s", + .id = 2, /* PSC ID */ + .num_resources = ARRAY_SIZE(au1300_psc2_res), + .resource = au1300_psc2_res, +}; + +/**********************************************************************/ + +static struct resource au1300_psc3_res[] = { + [0] = { + .start = AU1300_PSC3_PHYS_ADDR, + .end = AU1300_PSC3_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_PSC3_INT, + .end = AU1300_PSC3_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_PSC3_TX, + .end = AU1300_DSCR_CMD0_PSC3_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_PSC3_RX, + .end = AU1300_DSCR_CMD0_PSC3_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_i2c_dev = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1300_psc3_res), + .resource = au1300_psc3_res, +}; + +/**********************************************************************/ + +/* proper key assignments when facing the LCD panel. For key assignments + * according to the schematics swap up with down and left with right. + * I chose to use it to emulate the arrow keys of a keyboard. + */ +static struct gpio_keys_button db1300_5waysw_arrowkeys[] = { + { + .code = KEY_DOWN, + .gpio = AU1300_PIN_LCDPWM0, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-down", + }, + { + .code = KEY_UP, + .gpio = AU1300_PIN_PSC2SYNC1, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-up", + }, + { + .code = KEY_RIGHT, + .gpio = AU1300_PIN_WAKE3, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-right", + }, + { + .code = KEY_LEFT, + .gpio = AU1300_PIN_WAKE2, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-left", + }, + { + .code = KEY_ENTER, + .gpio = AU1300_PIN_WAKE1, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-push", + }, +}; + +static struct gpio_keys_platform_data db1300_5waysw_data = { + .buttons = db1300_5waysw_arrowkeys, + .nbuttons = ARRAY_SIZE(db1300_5waysw_arrowkeys), + .rep = 1, + .name = "db1300-5wayswitch", +}; + +static struct platform_device db1300_5waysw_dev = { + .name = "gpio-keys", + .dev = { + .platform_data = &db1300_5waysw_data, + }, +}; + +/**********************************************************************/ + +static struct platform_device db1300_rtc_dev = { + .name = "rtc-au1xxx", + .id = -1, +}; + +/**********************************************************************/ + +static struct pata_platform_info db1300_ide_info = { + .ioport_shift = DB1300_IDE_REG_SHIFT, +}; + +#define IDE_ALT_START (14 << DB1300_IDE_REG_SHIFT) +static struct resource db1300_ide_res[] = { + [0] = { + .start = DB1300_IDE_PHYS_ADDR, + .end = DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1300_IDE_PHYS_ADDR + IDE_ALT_START, + .end = DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = DB1300_IDE_INT, + .end = DB1300_IDE_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device db1300_ide_dev = { + .dev = { + .platform_data = &db1300_ide_info, + }, + .name = "pata_platform", + .resource = db1300_ide_res, + .num_resources = ARRAY_SIZE(db1300_ide_res), +}; + +/**********************************************************************/ + +static irqreturn_t db1300_mmc_cd(int irq, void *ptr) +{ + void(*mmc_cd)(struct mmc_host *, unsigned long); + + /* disable the one currently screaming. No other way to shut it up */ + if (irq == DB1300_SD1_INSERT_INT) { + disable_irq_nosync(DB1300_SD1_INSERT_INT); + enable_irq(DB1300_SD1_EJECT_INT); + } else { + disable_irq_nosync(DB1300_SD1_EJECT_INT); + enable_irq(DB1300_SD1_INSERT_INT); + } + + /* link against CONFIG_MMC=m. We can only be called once MMC core has + * initialized the controller, so symbol_get() should always succeed. + */ + mmc_cd = symbol_get(mmc_detect_change); + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + + return IRQ_HANDLED; +} + +static int db1300_mmc_card_readonly(void *mmc_host) +{ + /* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */ + return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP; +} + +static int db1300_mmc_card_inserted(void *mmc_host) +{ + return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */ +} + +static int db1300_mmc_cd_setup(void *mmc_host, int en) +{ + int ret; + + if (en) { + ret = request_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd, 0, + "sd_insert", mmc_host); + if (ret) + goto out; + + ret = request_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd, 0, + "sd_eject", mmc_host); + if (ret) { + free_irq(DB1300_SD1_INSERT_INT, mmc_host); + goto out; + } + + if (db1300_mmc_card_inserted(mmc_host)) + enable_irq(DB1300_SD1_EJECT_INT); + else + enable_irq(DB1300_SD1_INSERT_INT); + + } else { + free_irq(DB1300_SD1_INSERT_INT, mmc_host); + free_irq(DB1300_SD1_EJECT_INT, mmc_host); + } + ret = 0; +out: + return ret; +} + +static void db1300_mmcled_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); +} + +static struct led_classdev db1300_mmc_led = { + .brightness_set = db1300_mmcled_set, +}; + +struct au1xmmc_platform_data db1300_sd1_platdata = { + .cd_setup = db1300_mmc_cd_setup, + .card_inserted = db1300_mmc_card_inserted, + .card_readonly = db1300_mmc_card_readonly, + .led = &db1300_mmc_led, +}; + +static struct resource au1300_sd1_res[] = { + [0] = { + .start = AU1300_SD1_PHYS_ADDR, + .end = AU1300_SD1_PHYS_ADDR, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_SD1_INT, + .end = AU1300_SD1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_SDMS_TX1, + .end = AU1300_DSCR_CMD0_SDMS_TX1, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_SDMS_RX1, + .end = AU1300_DSCR_CMD0_SDMS_RX1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_sd1_dev = { + .dev = { + .platform_data = &db1300_sd1_platdata, + }, + .name = "au1xxx-mmc", + .id = 1, + .resource = au1300_sd1_res, + .num_resources = ARRAY_SIZE(au1300_sd1_res), +}; + +/**********************************************************************/ + +static int db1300_movinand_inserted(void *mmc_host) +{ + return 0; /* disable for now, it doesn't work yet */ +} + +static int db1300_movinand_readonly(void *mmc_host) +{ + return 0; +} + +static void db1300_movinand_led_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); +} + +static struct led_classdev db1300_movinand_led = { + .brightness_set = db1300_movinand_led_set, +}; + +struct au1xmmc_platform_data db1300_sd0_platdata = { + .card_inserted = db1300_movinand_inserted, + .card_readonly = db1300_movinand_readonly, + .led = &db1300_movinand_led, + .mask_host_caps = MMC_CAP_NEEDS_POLL, +}; + +static struct resource au1300_sd0_res[] = { + [0] = { + .start = AU1100_SD0_PHYS_ADDR, + .end = AU1100_SD0_PHYS_ADDR, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_SD0_INT, + .end = AU1300_SD0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_SDMS_TX0, + .end = AU1300_DSCR_CMD0_SDMS_TX0, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_SDMS_RX0, + .end = AU1300_DSCR_CMD0_SDMS_RX0, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_sd0_dev = { + .dev = { + .platform_data = &db1300_sd0_platdata, + }, + .name = "au1xxx-mmc", + .id = 0, + .resource = au1300_sd0_res, + .num_resources = ARRAY_SIZE(au1300_sd0_res), +}; + +/**********************************************************************/ + +static struct platform_device db1300_wm9715_dev = { + .name = "wm9712-codec", + .id = 1, /* ID of PSC for AC97 audio, see asoc glue! */ +}; + +static struct platform_device db1300_ac97dma_dev = { + .name = "au1xpsc-pcm", + .id = 1, /* PSC ID */ +}; + +static struct platform_device db1300_i2sdma_dev = { + .name = "au1xpsc-pcm", + .id = 2, /* PSC ID */ +}; + +static struct platform_device db1300_sndac97_dev = { + .name = "db1300-ac97", +}; + +static struct platform_device db1300_sndi2s_dev = { + .name = "db1300-i2s", +}; + +/**********************************************************************/ + +static struct resource au1300_lcd_res[] = { + [0] = { + .start = AU1200_LCD_PHYS_ADDR, + .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_LCD_INT, + .end = AU1300_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1300_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device db1300_lcd_dev = { + .name = "au1200-lcd", + .id = 0, + .dev = { + .dma_mask = &au1300_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(au1300_lcd_res), + .resource = au1300_lcd_res, +}; + +/**********************************************************************/ + +static struct platform_device *db1300_dev[] __initdata = { + &db1300_eth_dev, + &db1300_i2c_dev, + &db1300_5waysw_dev, + &db1300_rtc_dev, + &db1300_nand_dev, + &db1300_ide_dev, + &db1300_sd0_dev, + &db1300_sd1_dev, + &db1300_lcd_dev, + &db1300_ac97_dev, + &db1300_i2s_dev, + &db1300_wm9715_dev, + &db1300_ac97dma_dev, + &db1300_i2sdma_dev, + &db1300_sndac97_dev, + &db1300_sndi2s_dev, +}; + +static int __init db1300_device_init(void) +{ + int swapped, cpldirq; + + /* setup CPLD IRQ muxer */ + cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1); + irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH); + bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq); + + /* insert/eject IRQs: one always triggers so don't enable them + * when doing request_irq() on them. DB1200 has this bug too. + */ + irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN); + + /* + * setup board + */ + prom_get_ethernet_addr(&db1300_eth_config.mac[0]); + + i2c_register_board_info(0, db1300_i2c_devs, + ARRAY_SIZE(db1300_i2c_devs)); + + /* Audio PSC clock is supplied by codecs (PSC1, 2) */ + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + /* I2C uses internal 48MHz EXTCLK1 */ + __raw_writel(PSC_SEL_CLK_INTCLK, + (void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + + /* enable power to USB ports */ + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR); + + /* although it is socket #0, it uses the CPLD bits which previous boards + * have used for socket #1. + */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x00400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x00010000 - 1, + DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; + db1x_register_norflash(64 << 20, 2, swapped); + + return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev)); +} +device_initcall(db1300_device_init); + + +void __init board_setup(void) +{ + unsigned short whoami; + + db1300_gpio_config(); + bcsr_init(DB1300_BCSR_PHYS_ADDR, + DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS); + + whoami = bcsr_read(BCSR_WHOAMI); + printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t" + "BoardID %d CPLD Rev %d DaughtercardID %d\n", + BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami), + BCSR_WHOAMI_DCID(whoami)); + + /* enable UARTs, YAMON only enables #2 */ + alchemy_uart_enable(AU1300_UART0_PHYS_ADDR); + alchemy_uart_enable(AU1300_UART1_PHYS_ADDR); + alchemy_uart_enable(AU1300_UART3_PHYS_ADDR); +} + + +/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */ +int board_au1200fb_panel(void) +{ + return 9; /* DB1300_800x480 */ +} + +int board_au1200fb_panel_init(void) +{ + /* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD, + BCSR_BOARD_LCDBL); + return 0; +} + +int board_au1200fb_panel_shutdown(void) +{ + /* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL, + BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD); + return 0; +} diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c index f734833fbdda..3a73f9663b0f 100644 --- a/arch/mips/alchemy/devboards/prom.c +++ b/arch/mips/alchemy/devboards/prom.c @@ -61,5 +61,9 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { +#ifdef CONFIG_MIPS_DB1300 + alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c); +#else alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +#endif } diff --git a/arch/mips/boot/compressed/uart-alchemy.c b/arch/mips/boot/compressed/uart-alchemy.c index eb063e6dead9..3112df8f90db 100644 --- a/arch/mips/boot/compressed/uart-alchemy.c +++ b/arch/mips/boot/compressed/uart-alchemy.c @@ -2,6 +2,9 @@ void putc(char c) { - /* all current (Jan. 2010) in-kernel boards */ +#ifdef CONFIG_MIPS_DB1300 + alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c); +#else alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); +#endif } diff --git a/arch/mips/configs/db1300_defconfig b/arch/mips/configs/db1300_defconfig new file mode 100644 index 000000000000..c38b190151c4 --- /dev/null +++ b/arch/mips/configs/db1300_defconfig @@ -0,0 +1,391 @@ +CONFIG_MIPS=y +CONFIG_MIPS_ALCHEMY=y +CONFIG_ALCHEMY_GPIOINT_AU1300=y +CONFIG_MIPS_DB1300=y +CONFIG_SOC_AU1300=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DMA_COHERENT=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y +CONFIG_GENERIC_GPIO=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_CPU_MIPS32_R1=y +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_32BIT=y +CONFIG_PAGE_SIZE_4KB=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +CONFIG_64BIT_PHYS_ADDR=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_NEED_PER_CPU_KM=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_HZ_100=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y +CONFIG_HAVE_IRQ_WORK=y +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +CONFIG_LOCALVERSION="-db1300" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_LZMA=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_FHANDLE=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_TINY_RCU=y +CONFIG_LOG_BUF_SHIFT=19 +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EXPERT=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_SLAB=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_IOSCHED_NOOP=y +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_INLINE_SPIN_UNLOCK=y +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_INLINE_READ_UNLOCK=y +CONFIG_INLINE_READ_UNLOCK_IRQ=y +CONFIG_INLINE_WRITE_UNLOCK=y +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_MMU=y +CONFIG_PCCARD=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_TRAD_SIGNALS=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_INET_TUNNEL=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_IPV6=y +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_UB=y +CONFIG_HAVE_IDE=y +CONFIG_IDE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +CONFIG_BLK_DEV_IDECS=y +CONFIG_IDE_TASK_IOCTL=y +CONFIG_IDE_PROC_FS=y +CONFIG_BLK_DEV_PLATFORM=y +CONFIG_SCSI_MOD=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_PHYLIB=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_SMSC911X=y +CONFIG_INPUT=y |