summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/regulator/max8973-regulator.txt6
-rw-r--r--drivers/extcon/extcon-max77693.c94
-rw-r--r--drivers/extcon/extcon-max77843.c66
-rw-r--r--drivers/input/misc/Kconfig18
-rw-r--r--drivers/input/misc/Makefile1
-rw-r--r--drivers/input/misc/max77693-haptic.c92
-rw-r--r--drivers/input/misc/max77843-haptic.c358
-rw-r--r--drivers/leds/leds-max77693.c1
-rw-r--r--drivers/mfd/max77693.c31
-rw-r--r--drivers/mfd/max77843.c20
-rw-r--r--drivers/power/max77693_charger.c1
-rw-r--r--drivers/regulator/Kconfig16
-rw-r--r--drivers/regulator/Makefile1
-rw-r--r--drivers/regulator/lp872x.c16
-rw-r--r--drivers/regulator/ltc3589.c3
-rw-r--r--drivers/regulator/max77693.c173
-rw-r--r--drivers/regulator/max77843.c201
-rw-r--r--drivers/regulator/max8973-regulator.c80
-rw-r--r--include/linux/mfd/max77693-common.h49
-rw-r--r--include/linux/mfd/max77693-private.h134
-rw-r--r--include/linux/mfd/max77843-private.h174
21 files changed, 622 insertions, 913 deletions
diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
index 55efb24e5683..f80ea2fe27e6 100644
--- a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
@@ -25,6 +25,12 @@ Optional properties:
-maxim,enable-frequency-shift: boolean, enable 9% frequency shift.
-maxim,enable-bias-control: boolean, enable bias control. By enabling this
startup delay can be reduce to 20us from 220us.
+-maxim,enable-etr: boolean, enable Enhanced Transient Response.
+-maxim,enable-high-etr-sensitivity: boolean, Enhanced transient response
+ circuit is enabled and set for high sensitivity. If this
+ property is available then etr will be enable default.
+
+Enhanced transient response (ETR) will affect the configuration of CKADV.
Example:
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index f4f3b3d53928..35b9e118b2fb 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -24,6 +24,7 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77693-private.h>
#include <linux/extcon.h>
#include <linux/regmap.h>
@@ -42,7 +43,7 @@ static struct max77693_reg_data default_init_data[] = {
{
/* STATUS2 - [3]ChgDetRun */
.addr = MAX77693_MUIC_REG_STATUS2,
- .data = STATUS2_CHGDETRUN_MASK,
+ .data = MAX77693_STATUS2_CHGDETRUN_MASK,
}, {
/* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */
.addr = MAX77693_MUIC_REG_INTMASK1,
@@ -235,7 +236,7 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
*/
ret = regmap_write(info->max77693->regmap_muic,
MAX77693_MUIC_REG_CTRL3,
- time << CONTROL3_ADCDBSET_SHIFT);
+ time << MAX77693_CONTROL3_ADCDBSET_SHIFT);
if (ret) {
dev_err(info->dev, "failed to set ADC debounce time\n");
return ret;
@@ -268,7 +269,7 @@ static int max77693_muic_set_path(struct max77693_muic_info *info,
if (attached)
ctrl1 = val;
else
- ctrl1 = CONTROL1_SW_OPEN;
+ ctrl1 = MAX77693_CONTROL1_SW_OPEN;
ret = regmap_update_bits(info->max77693->regmap_muic,
MAX77693_MUIC_REG_CTRL1, COMP_SW_MASK, ctrl1);
@@ -278,13 +279,14 @@ static int max77693_muic_set_path(struct max77693_muic_info *info,
}
if (attached)
- ctrl2 |= CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */
+ ctrl2 |= MAX77693_CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */
else
- ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
+ ctrl2 |= MAX77693_CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
ret = regmap_update_bits(info->max77693->regmap_muic,
MAX77693_MUIC_REG_CTRL2,
- CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK, ctrl2);
+ MAX77693_CONTROL2_LOWPWR_MASK | MAX77693_CONTROL2_CPEN_MASK,
+ ctrl2);
if (ret < 0) {
dev_err(info->dev, "failed to update MUIC register\n");
return ret;
@@ -326,8 +328,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
* Read ADC value to check cable type and decide cable state
* according to cable type
*/
- adc = info->status[0] & STATUS1_ADC_MASK;
- adc >>= STATUS1_ADC_SHIFT;
+ adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
+ adc >>= MAX77693_STATUS1_ADC_SHIFT;
/*
* Check current cable state/cable type and store cable type
@@ -350,8 +352,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
* Read ADC value to check cable type and decide cable state
* according to cable type
*/
- adc = info->status[0] & STATUS1_ADC_MASK;
- adc >>= STATUS1_ADC_SHIFT;
+ adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
+ adc >>= MAX77693_STATUS1_ADC_SHIFT;
/*
* Check current cable state/cable type and store cable type
@@ -366,13 +368,13 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
} else {
*attached = true;
- adclow = info->status[0] & STATUS1_ADCLOW_MASK;
- adclow >>= STATUS1_ADCLOW_SHIFT;
- adc1k = info->status[0] & STATUS1_ADC1K_MASK;
- adc1k >>= STATUS1_ADC1K_SHIFT;
+ adclow = info->status[0] & MAX77693_STATUS1_ADCLOW_MASK;
+ adclow >>= MAX77693_STATUS1_ADCLOW_SHIFT;
+ adc1k = info->status[0] & MAX77693_STATUS1_ADC1K_MASK;
+ adc1k >>= MAX77693_STATUS1_ADC1K_SHIFT;
- vbvolt = info->status[1] & STATUS2_VBVOLT_MASK;
- vbvolt >>= STATUS2_VBVOLT_SHIFT;
+ vbvolt = info->status[1] & MAX77693_STATUS2_VBVOLT_MASK;
+ vbvolt >>= MAX77693_STATUS2_VBVOLT_SHIFT;
/**
* [0x1|VBVolt|ADCLow|ADC1K]
@@ -397,8 +399,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
* Read charger type to check cable type and decide cable state
* according to type of charger cable.
*/
- chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
- chg_type >>= STATUS2_CHGTYP_SHIFT;
+ chg_type = info->status[1] & MAX77693_STATUS2_CHGTYP_MASK;
+ chg_type >>= MAX77693_STATUS2_CHGTYP_SHIFT;
if (chg_type == MAX77693_CHARGER_TYPE_NONE) {
*attached = false;
@@ -422,10 +424,10 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
* Read ADC value to check cable type and decide cable state
* according to cable type
*/
- adc = info->status[0] & STATUS1_ADC_MASK;
- adc >>= STATUS1_ADC_SHIFT;
- chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
- chg_type >>= STATUS2_CHGTYP_SHIFT;
+ adc = info->status[0] & MAX77693_STATUS1_ADC_MASK;
+ adc >>= MAX77693_STATUS1_ADC_SHIFT;
+ chg_type = info->status[1] & MAX77693_STATUS2_CHGTYP_MASK;
+ chg_type >>= MAX77693_STATUS2_CHGTYP_SHIFT;
if (adc == MAX77693_MUIC_ADC_OPEN
&& chg_type == MAX77693_CHARGER_TYPE_NONE)
@@ -437,8 +439,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info,
* Read vbvolt field, if vbvolt is 1,
* this cable is used for charging.
*/
- vbvolt = info->status[1] & STATUS2_VBVOLT_MASK;
- vbvolt >>= STATUS2_VBVOLT_SHIFT;
+ vbvolt = info->status[1] & MAX77693_STATUS2_VBVOLT_MASK;
+ vbvolt >>= MAX77693_STATUS2_VBVOLT_SHIFT;
cable_type = vbvolt;
break;
@@ -520,7 +522,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
}
/* Dock-Car/Desk/Audio, PATH:AUDIO */
- ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
+ ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_AUDIO,
+ attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, dock_id, attached);
@@ -585,14 +588,16 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
case MAX77693_MUIC_GND_USB_HOST:
case MAX77693_MUIC_GND_USB_HOST_VB:
/* USB_HOST, PATH: AP_USB */
- ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
+ ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_USB,
+ attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX77693_MUIC_GND_AV_CABLE_LOAD:
/* Audio Video Cable with load, PATH:AUDIO */
- ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
+ ret = max77693_muic_set_path(info, MAX77693_CONTROL1_SW_AUDIO,
+ attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
@@ -615,7 +620,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
int cable_type, bool attached)
{
int ret = 0;
- u8 path = CONTROL1_SW_OPEN;
+ u8 path = MAX77693_CONTROL1_SW_OPEN;
dev_info(info->dev,
"external connector is %s (adc:0x%02x)\n",
@@ -625,12 +630,12 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */
/* PATH:AP_USB */
- path = CONTROL1_SW_USB;
+ path = MAX77693_CONTROL1_SW_USB;
break;
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* ADC_JIG_UART_ON */
/* PATH:AP_UART */
- path = CONTROL1_SW_UART;
+ path = MAX77693_CONTROL1_SW_UART;
break;
default:
dev_err(info->dev, "failed to detect %s jig cable\n",
@@ -1077,7 +1082,7 @@ static int max77693_muic_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "allocate register map\n");
} else {
info->max77693->regmap_muic = devm_regmap_init_i2c(
- info->max77693->muic,
+ info->max77693->i2c_muic,
&max77693_muic_regmap_config);
if (IS_ERR(info->max77693->regmap_muic)) {
ret = PTR_ERR(info->max77693->regmap_muic);
@@ -1164,28 +1169,9 @@ static int max77693_muic_probe(struct platform_device *pdev)
}
for (i = 0; i < num_init_data; i++) {
- enum max77693_irq_source irq_src
- = MAX77693_IRQ_GROUP_NR;
-
regmap_write(info->max77693->regmap_muic,
init_data[i].addr,
init_data[i].data);
-
- switch (init_data[i].addr) {
- case MAX77693_MUIC_REG_INTMASK1:
- irq_src = MUIC_INT1;
- break;
- case MAX77693_MUIC_REG_INTMASK2:
- irq_src = MUIC_INT2;
- break;
- case MAX77693_MUIC_REG_INTMASK3:
- irq_src = MUIC_INT3;
- break;
- }
-
- if (irq_src < MAX77693_IRQ_GROUP_NR)
- info->max77693->irq_masks_cur[irq_src]
- = init_data[i].data;
}
if (pdata && pdata->muic_data) {
@@ -1199,12 +1185,12 @@ static int max77693_muic_probe(struct platform_device *pdev)
if (muic_pdata->path_uart)
info->path_uart = muic_pdata->path_uart;
else
- info->path_uart = CONTROL1_SW_UART;
+ info->path_uart = MAX77693_CONTROL1_SW_UART;
if (muic_pdata->path_usb)
info->path_usb = muic_pdata->path_usb;
else
- info->path_usb = CONTROL1_SW_USB;
+ info->path_usb = MAX77693_CONTROL1_SW_USB;
/*
* Default delay time for detecting cable state
@@ -1216,8 +1202,8 @@ static int max77693_muic_probe(struct platform_device *pdev)
else
delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
} else {
- info->path_usb = CONTROL1_SW_USB;
- info->path_uart = CONTROL1_SW_UART;
+ info->path_usb = MAX77693_CONTROL1_SW_USB;
+ info->path_uart = MAX77693_CONTROL1_SW_UART;
delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
}
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
index fac2f1417a79..f652c4199870 100644
--- a/drivers/extcon/extcon-max77843.c
+++ b/drivers/extcon/extcon-max77843.c
@@ -15,6 +15,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
+#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77843-private.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -32,7 +33,7 @@ enum max77843_muic_status {
struct max77843_muic_info {
struct device *dev;
- struct max77843 *max77843;
+ struct max77693_dev *max77843;
struct extcon_dev *edev;
struct mutex mutex;
@@ -198,18 +199,18 @@ static const struct regmap_irq_chip max77843_muic_irq_chip = {
static int max77843_muic_set_path(struct max77843_muic_info *info,
u8 val, bool attached)
{
- struct max77843 *max77843 = info->max77843;
+ struct max77693_dev *max77843 = info->max77843;
int ret = 0;
unsigned int ctrl1, ctrl2;
if (attached)
ctrl1 = val;
else
- ctrl1 = CONTROL1_SW_OPEN;
+ ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN;
ret = regmap_update_bits(max77843->regmap_muic,
MAX77843_MUIC_REG_CONTROL1,
- CONTROL1_COM_SW, ctrl1);
+ MAX77843_MUIC_CONTROL1_COM_SW, ctrl1);
if (ret < 0) {
dev_err(info->dev, "Cannot switch MUIC port\n");
return ret;
@@ -243,7 +244,7 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
adc = info->status[MAX77843_MUIC_STATUS1] &
MAX77843_MUIC_STATUS1_ADC_MASK;
- adc >>= STATUS1_ADC_SHIFT;
+ adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT;
switch (group) {
case MAX77843_CABLE_GROUP_ADC:
@@ -309,7 +310,7 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
/* Get VBVolt register bit */
gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
MAX77843_MUIC_STATUS2_VBVOLT_MASK);
- gnd_type >>= STATUS2_VBVOLT_SHIFT;
+ gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT;
/* Offset of GND cable */
gnd_type |= MAX77843_MUIC_GND_USB_HOST;
@@ -338,7 +339,9 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
switch (gnd_cable_type) {
case MAX77843_MUIC_GND_USB_HOST:
case MAX77843_MUIC_GND_USB_HOST_VB:
- ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_USB,
+ attached);
if (ret < 0)
return ret;
@@ -346,7 +349,9 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
break;
case MAX77843_MUIC_GND_MHL_VB:
case MAX77843_MUIC_GND_MHL:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
@@ -365,7 +370,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
int cable_type, bool attached)
{
int ret;
- u8 path = CONTROL1_SW_OPEN;
+ u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN;
dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
attached ? "attached" : "detached", cable_type);
@@ -373,10 +378,10 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
switch (cable_type) {
case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
- path = CONTROL1_SW_USB;
+ path = MAX77843_MUIC_CONTROL1_SW_USB;
break;
case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
- path = CONTROL1_SW_UART;
+ path = MAX77843_MUIC_CONTROL1_SW_UART;
break;
default:
return -EINVAL;
@@ -474,14 +479,18 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
switch (chg_type) {
case MAX77843_MUIC_CHG_USB:
- ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_USB,
+ attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
break;
case MAX77843_MUIC_CHG_DOWNSTREAM:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
@@ -489,14 +498,18 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
attached);
break;
case MAX77843_MUIC_CHG_DEDICATED:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_500MA:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
@@ -504,7 +517,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_1A:
- ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ ret = max77843_muic_set_path(info,
+ MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
if (ret < 0)
return ret;
@@ -528,7 +543,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
"failed to detect %s accessory (chg_type:0x%x)\n",
attached ? "attached" : "detached", chg_type);
- max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
+ max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN,
+ attached);
return -EINVAL;
}
@@ -539,7 +555,7 @@ static void max77843_muic_irq_work(struct work_struct *work)
{
struct max77843_muic_info *info = container_of(work,
struct max77843_muic_info, irq_work);
- struct max77843 *max77843 = info->max77843;
+ struct max77693_dev *max77843 = info->max77843;
int ret = 0;
mutex_lock(&info->mutex);
@@ -615,7 +631,7 @@ static void max77843_muic_detect_cable_wq(struct work_struct *work)
{
struct max77843_muic_info *info = container_of(to_delayed_work(work),
struct max77843_muic_info, wq_detcable);
- struct max77843 *max77843 = info->max77843;
+ struct max77693_dev *max77843 = info->max77843;
int chg_type, adc, ret;
bool attached;
@@ -656,7 +672,7 @@ err_cable_wq:
static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
enum max77843_muic_adc_debounce_time time)
{
- struct max77843 *max77843 = info->max77843;
+ struct max77693_dev *max77843 = info->max77843;
int ret;
switch (time) {
@@ -667,7 +683,7 @@ static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
ret = regmap_update_bits(max77843->regmap_muic,
MAX77843_MUIC_REG_CONTROL4,
MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
- time << CONTROL4_ADCDBSET_SHIFT);
+ time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT);
if (ret < 0) {
dev_err(info->dev, "Cannot write MUIC regmap\n");
return ret;
@@ -681,7 +697,7 @@ static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
return 0;
}
-static int max77843_init_muic_regmap(struct max77843 *max77843)
+static int max77843_init_muic_regmap(struct max77693_dev *max77843)
{
int ret;
@@ -720,7 +736,7 @@ err_muic_i2c:
static int max77843_muic_probe(struct platform_device *pdev)
{
- struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
struct max77843_muic_info *info;
unsigned int id;
int i, ret;
@@ -768,7 +784,7 @@ static int max77843_muic_probe(struct platform_device *pdev)
max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
/* Set initial path for UART */
- max77843_muic_set_path(info, CONTROL1_SW_UART, true);
+ max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true);
/* Check revision number of MUIC device */
ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
@@ -821,7 +837,7 @@ err_muic_irq:
static int max77843_muic_remove(struct platform_device *pdev)
{
struct max77843_muic_info *info = platform_get_drvdata(pdev);
- struct max77843 *max77843 = info->max77843;
+ struct max77693_dev *max77843 = info->max77843;
cancel_work_sync(&info->irq_work);
regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index d4f0a817e858..c41dec819cdf 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -167,28 +167,16 @@ config INPUT_M68K_BEEP
depends on M68K
config INPUT_MAX77693_HAPTIC
- tristate "MAXIM MAX77693 haptic controller support"
- depends on MFD_MAX77693 && PWM
+ tristate "MAXIM MAX77693/MAX77843 haptic controller support"
+ depends on (MFD_MAX77693 || MFD_MAX77843) && PWM
select INPUT_FF_MEMLESS
help
This option enables support for the haptic controller on
- MAXIM MAX77693 chip.
+ MAXIM MAX77693 and MAX77843 chips.
To compile this driver as module, choose M here: the
module will be called max77693-haptic.
-config INPUT_MAX77843_HAPTIC
- tristate "MAXIM MAX77843 haptic controller support"
- depends on MFD_MAX77843 && REGULATOR
- select INPUT_FF_MEMLESS
- help
- This option enables support for the haptic controller on
- MAXIM MAX77843 chip. The driver supports ff-memless interface
- from input framework.
-
- To compile this driver as module, choose M here: the
- module will be called max77843-haptic.
-
config INPUT_MAX8925_ONKEY
tristate "MAX8925 ONKEY support"
depends on MFD_MAX8925
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 53df07dcc23c..0357a088c6a9 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -41,7 +41,6 @@ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_MAX77693_HAPTIC) += max77693-haptic.o
-obj-$(CONFIG_INPUT_MAX77843_HAPTIC) += max77843-haptic.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o
obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o
diff --git a/drivers/input/misc/max77693-haptic.c b/drivers/input/misc/max77693-haptic.c
index 39e930c10ebb..6d96bff32a0e 100644
--- a/drivers/input/misc/max77693-haptic.c
+++ b/drivers/input/misc/max77693-haptic.c
@@ -1,8 +1,9 @@
/*
- * MAXIM MAX77693 Haptic device driver
+ * MAXIM MAX77693/MAX77843 Haptic device driver
*
- * Copyright (C) 2014 Samsung Electronics
+ * Copyright (C) 2014,2015 Samsung Electronics
* Jaewon Kim <jaewon02.kim@samsung.com>
+ * Krzysztof Kozlowski <k.kozlowski@samsung.com>
*
* This program is not provided / owned by Maxim Integrated Products.
*
@@ -24,7 +25,9 @@
#include <linux/workqueue.h>
#include <linux/regulator/consumer.h>
#include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77693-private.h>
+#include <linux/mfd/max77843-private.h>
#define MAX_MAGNITUDE_SHIFT 16
@@ -46,6 +49,8 @@ enum max77693_haptic_pwm_divisor {
};
struct max77693_haptic {
+ enum max77693_types dev_type;
+
struct regmap *regmap_pmic;
struct regmap *regmap_haptic;
struct device *dev;
@@ -59,7 +64,6 @@ struct max77693_haptic {
unsigned int pwm_duty;
enum max77693_haptic_motor_type type;
enum max77693_haptic_pulse_mode mode;
- enum max77693_haptic_pwm_divisor pwm_divisor;
struct work_struct work;
};
@@ -78,19 +82,52 @@ static int max77693_haptic_set_duty_cycle(struct max77693_haptic *haptic)
return 0;
}
+static int max77843_haptic_bias(struct max77693_haptic *haptic, bool on)
+{
+ int error;
+
+ if (haptic->dev_type != TYPE_MAX77843)
+ return 0;
+
+ error = regmap_update_bits(haptic->regmap_haptic,
+ MAX77843_SYS_REG_MAINCTRL1,
+ MAX77843_MAINCTRL1_BIASEN_MASK,
+ on << MAINCTRL1_BIASEN_SHIFT);
+ if (error) {
+ dev_err(haptic->dev, "failed to %s bias: %d\n",
+ on ? "enable" : "disable", error);
+ return error;
+ }
+
+ return 0;
+}
+
static int max77693_haptic_configure(struct max77693_haptic *haptic,
bool enable)
{
- unsigned int value;
+ unsigned int value, config_reg;
int error;
- value = ((haptic->type << MAX77693_CONFIG2_MODE) |
- (enable << MAX77693_CONFIG2_MEN) |
- (haptic->mode << MAX77693_CONFIG2_HTYP) |
- (haptic->pwm_divisor));
+ switch (haptic->dev_type) {
+ case TYPE_MAX77693:
+ value = ((haptic->type << MAX77693_CONFIG2_MODE) |
+ (enable << MAX77693_CONFIG2_MEN) |
+ (haptic->mode << MAX77693_CONFIG2_HTYP) |
+ MAX77693_HAPTIC_PWM_DIVISOR_128);
+ config_reg = MAX77693_HAPTIC_REG_CONFIG2;
+ break;
+ case TYPE_MAX77843:
+ value = (haptic->type << MCONFIG_MODE_SHIFT) |
+ (enable << MCONFIG_MEN_SHIFT) |
+ MAX77693_HAPTIC_PWM_DIVISOR_128;
+ config_reg = MAX77843_HAP_REG_MCONFIG;
+ break;
+ default:
+ return -EINVAL;
+ }
error = regmap_write(haptic->regmap_haptic,
- MAX77693_HAPTIC_REG_CONFIG2, value);
+ config_reg, value);
if (error) {
dev_err(haptic->dev,
"failed to update haptic config: %d\n", error);
@@ -104,6 +141,9 @@ static int max77693_haptic_lowsys(struct max77693_haptic *haptic, bool enable)
{
int error;
+ if (haptic->dev_type != TYPE_MAX77693)
+ return 0;
+
error = regmap_update_bits(haptic->regmap_pmic,
MAX77693_PMIC_REG_LSCNFG,
MAX77693_PMIC_LOW_SYS_MASK,
@@ -219,6 +259,10 @@ static int max77693_haptic_open(struct input_dev *dev)
struct max77693_haptic *haptic = input_get_drvdata(dev);
int error;
+ error = max77843_haptic_bias(haptic, true);
+ if (error)
+ return error;
+
error = regulator_enable(haptic->motor_reg);
if (error) {
dev_err(haptic->dev,
@@ -241,6 +285,8 @@ static void max77693_haptic_close(struct input_dev *dev)
if (error)
dev_err(haptic->dev,
"failed to disable regulator: %d\n", error);
+
+ max77843_haptic_bias(haptic, false);
}
static int max77693_haptic_probe(struct platform_device *pdev)
@@ -254,13 +300,26 @@ static int max77693_haptic_probe(struct platform_device *pdev)
return -ENOMEM;
haptic->regmap_pmic = max77693->regmap;
- haptic->regmap_haptic = max77693->regmap_haptic;
haptic->dev = &pdev->dev;
haptic->type = MAX77693_HAPTIC_LRA;
haptic->mode = MAX77693_HAPTIC_EXTERNAL_MODE;
- haptic->pwm_divisor = MAX77693_HAPTIC_PWM_DIVISOR_128;
haptic->suspend_state = false;
+ /* Variant-specific init */
+ haptic->dev_type = platform_get_device_id(pdev)->driver_data;
+ switch (haptic->dev_type) {
+ case TYPE_MAX77693:
+ haptic->regmap_haptic = max77693->regmap_haptic;
+ break;
+ case TYPE_MAX77843:
+ haptic->regmap_haptic = max77693->regmap;
+ break;
+ default:
+ dev_err(&pdev->dev, "unsupported device type: %u\n",
+ haptic->dev_type);
+ return -EINVAL;
+ }
+
INIT_WORK(&haptic->work, max77693_haptic_play_work);
/* Get pwm and regulatot for haptic device */
@@ -338,16 +397,25 @@ static int __maybe_unused max77693_haptic_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(max77693_haptic_pm_ops,
max77693_haptic_suspend, max77693_haptic_resume);
+static const struct platform_device_id max77693_haptic_id[] = {
+ { "max77693-haptic", TYPE_MAX77693 },
+ { "max77843-haptic", TYPE_MAX77843 },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, max77693_haptic_id);
+
static struct platform_driver max77693_haptic_driver = {
.driver = {
.name = "max77693-haptic",
.pm = &max77693_haptic_pm_ops,
},
.probe = max77693_haptic_probe,
+ .id_table = max77693_haptic_id,
};
module_platform_driver(max77693_haptic_driver);
MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
-MODULE_DESCRIPTION("MAXIM MAX77693 Haptic driver");
+MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_DESCRIPTION("MAXIM 77693/77843 Haptic driver");
MODULE_ALIAS("platform:max77693-haptic");
MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/max77843-haptic.c b/drivers/input/misc/max77843-haptic.c
deleted file mode 100644
index dccbb465a055..000000000000
--- a/drivers/input/misc/max77843-haptic.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * MAXIM MAX77693 Haptic device driver
- *
- * Copyright (C) 2015 Samsung Electronics
- * Author: Jaewon Kim <jaewon02.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/mfd/max77843-private.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/regmap.h>
-#include <linux/regulator/consumer.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-
-#define MAX_MAGNITUDE_SHIFT 16
-
-enum max77843_haptic_motor_type {
- MAX77843_HAPTIC_ERM = 0,
- MAX77843_HAPTIC_LRA,
-};
-
-enum max77843_haptic_pwm_divisor {
- MAX77843_HAPTIC_PWM_DIVISOR_32 = 0,
- MAX77843_HAPTIC_PWM_DIVISOR_64,
- MAX77843_HAPTIC_PWM_DIVISOR_128,
- MAX77843_HAPTIC_PWM_DIVISOR_256,
-};
-
-struct max77843_haptic {
- struct regmap *regmap_haptic;
- struct device *dev;
- struct input_dev *input_dev;
- struct pwm_device *pwm_dev;
- struct regulator *motor_reg;
- struct work_struct work;
- struct mutex mutex;
-
- unsigned int magnitude;
- unsigned int pwm_duty;
-
- bool active;
- bool suspended;
-
- enum max77843_haptic_motor_type type;
- enum max77843_haptic_pwm_divisor pwm_divisor;
-};
-
-static int max77843_haptic_set_duty_cycle(struct max77843_haptic *haptic)
-{
- int delta = (haptic->pwm_dev->period + haptic->pwm_duty) / 2;
- int error;
-
- error = pwm_config(haptic->pwm_dev, delta, haptic->pwm_dev->period);
- if (error) {
- dev_err(haptic->dev, "failed to configure pwm: %d\n", error);
- return error;
- }
-
- return 0;
-}
-
-static int max77843_haptic_bias(struct max77843_haptic *haptic, bool on)
-{
- int error;
-
- error = regmap_update_bits(haptic->regmap_haptic,
- MAX77843_SYS_REG_MAINCTRL1,
- MAX77843_MAINCTRL1_BIASEN_MASK,
- on << MAINCTRL1_BIASEN_SHIFT);
- if (error) {
- dev_err(haptic->dev, "failed to %s bias: %d\n",
- on ? "enable" : "disable", error);
- return error;
- }
-
- return 0;
-}
-
-static int max77843_haptic_config(struct max77843_haptic *haptic, bool enable)
-{
- unsigned int value;
- int error;
-
- value = (haptic->type << MCONFIG_MODE_SHIFT) |
- (enable << MCONFIG_MEN_SHIFT) |
- (haptic->pwm_divisor << MCONFIG_PDIV_SHIFT);
-
- error = regmap_write(haptic->regmap_haptic,
- MAX77843_HAP_REG_MCONFIG, value);
- if (error) {
- dev_err(haptic->dev,
- "failed to update haptic config: %d\n", error);
- return error;
- }
-
- return 0;
-}
-
-static int max77843_haptic_enable(struct max77843_haptic *haptic)
-{
- int error;
-
- if (haptic->active)
- return 0;
-
- error = pwm_enable(haptic->pwm_dev);
- if (error) {
- dev_err(haptic->dev,
- "failed to enable pwm device: %d\n", error);
- return error;
- }
-
- error = max77843_haptic_config(haptic, true);
- if (error)
- goto err_config;
-
- haptic->active = true;
-
- return 0;
-
-err_config:
- pwm_disable(haptic->pwm_dev);
-
- return error;
-}
-
-static int max77843_haptic_disable(struct max77843_haptic *haptic)
-{
- int error;
-
- if (!haptic->active)