diff options
author | William Tu <u9012063@gmail.com> | 2018-04-26 14:01:39 -0700 |
---|---|---|
committer | Daniel Borkmann <daniel@iogearbox.net> | 2018-04-27 00:11:14 +0200 |
commit | 933a741e3b8295b9192a07367ebc15cbb4bdf957 (patch) | |
tree | c418de16bb6bbeefa7956319038cf6476c79cb79 /tools | |
parent | f761312023a1f0d625e34daadd54c3f9cb2a4ac2 (diff) |
selftests/bpf: bpf tunnel test.
The patch migrates the original tests at samples/bpf/tcbpf2_kern.c
and samples/bpf/test_tunnel_bpf.sh to selftests. There are a couple
changes from the original:
1) add ipv6 vxlan, ipv6 geneve, ipv6 ipip tests
2) simplify the original ipip tests (remove iperf tests)
3) improve documentation
4) use bpf_ntoh* and bpf_hton* api
In summary, 'test_tunnel_kern.o' contains the following bpf program:
GRE: gre_set_tunnel, gre_get_tunnel
IP6GRE: ip6gretap_set_tunnel, ip6gretap_get_tunnel
ERSPAN: erspan_set_tunnel, erspan_get_tunnel
IP6ERSPAN: ip4ip6erspan_set_tunnel, ip4ip6erspan_get_tunnel
VXLAN: vxlan_set_tunnel, vxlan_get_tunnel
IP6VXLAN: ip6vxlan_set_tunnel, ip6vxlan_get_tunnel
GENEVE: geneve_set_tunnel, geneve_get_tunnel
IP6GENEVE: ip6geneve_set_tunnel, ip6geneve_get_tunnel
IPIP: ipip_set_tunnel, ipip_get_tunnel
IP6IP: ipip6_set_tunnel, ipip6_get_tunnel,
ip6ip6_set_tunnel, ip6ip6_get_tunnel
XFRM: xfrm_get_state
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Diffstat (limited to 'tools')
-rw-r--r-- | tools/testing/selftests/bpf/Makefile | 5 | ||||
-rwxr-xr-x | tools/testing/selftests/bpf/test_tunnel.sh | 729 | ||||
-rw-r--r-- | tools/testing/selftests/bpf/test_tunnel_kern.c | 713 |
3 files changed, 1445 insertions, 2 deletions
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 0c19d5e08f08..b64a7a39cbc8 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -32,7 +32,7 @@ TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test test_l4lb_noinline.o test_xdp_noinline.o test_stacktrace_map.o \ sample_map_ret0.o test_tcpbpf_kern.o test_stacktrace_build_id.o \ sockmap_tcp_msg_prog.o connect4_prog.o connect6_prog.o test_adjust_tail.o \ - test_btf_haskv.o test_btf_nokv.o test_sockmap_kern.o + test_btf_haskv.o test_btf_nokv.o test_sockmap_kern.o test_tunnel_kern.o # Order correspond to 'make run_tests' order TEST_PROGS := test_kmod.sh \ @@ -40,7 +40,8 @@ TEST_PROGS := test_kmod.sh \ test_xdp_redirect.sh \ test_xdp_meta.sh \ test_offload.py \ - test_sock_addr.sh + test_sock_addr.sh \ + test_tunnel.sh # Compile but not part of 'make run_tests' TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr diff --git a/tools/testing/selftests/bpf/test_tunnel.sh b/tools/testing/selftests/bpf/test_tunnel.sh new file mode 100755 index 000000000000..aeb2901f21f4 --- /dev/null +++ b/tools/testing/selftests/bpf/test_tunnel.sh @@ -0,0 +1,729 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# End-to-end eBPF tunnel test suite +# The script tests BPF network tunnel implementation. +# +# Topology: +# --------- +# root namespace | at_ns0 namespace +# | +# ----------- | ----------- +# | tnl dev | | | tnl dev | (overlay network) +# ----------- | ----------- +# metadata-mode | native-mode +# with bpf | +# | +# ---------- | ---------- +# | veth1 | --------- | veth0 | (underlay network) +# ---------- peer ---------- +# +# +# Device Configuration +# -------------------- +# Root namespace with metadata-mode tunnel + BPF +# Device names and addresses: +# veth1 IP: 172.16.1.200, IPv6: 00::22 (underlay) +# tunnel dev <type>11, ex: gre11, IPv4: 10.1.1.200 (overlay) +# +# Namespace at_ns0 with native tunnel +# Device names and addresses: +# veth0 IPv4: 172.16.1.100, IPv6: 00::11 (underlay) +# tunnel dev <type>00, ex: gre00, IPv4: 10.1.1.100 (overlay) +# +# +# End-to-end ping packet flow +# --------------------------- +# Most of the tests start by namespace creation, device configuration, +# then ping the underlay and overlay network. When doing 'ping 10.1.1.100' +# from root namespace, the following operations happen: +# 1) Route lookup shows 10.1.1.100/24 belongs to tnl dev, fwd to tnl dev. +# 2) Tnl device's egress BPF program is triggered and set the tunnel metadata, +# with remote_ip=172.16.1.200 and others. +# 3) Outer tunnel header is prepended and route the packet to veth1's egress +# 4) veth0's ingress queue receive the tunneled packet at namespace at_ns0 +# 5) Tunnel protocol handler, ex: vxlan_rcv, decap the packet +# 6) Forward the packet to the overlay tnl dev + +PING_ARG="-c 3 -w 10 -q" +ret=0 +GREEN='\033[0;92m' +RED='\033[0;31m' +NC='\033[0m' # No Color + +config_device() +{ + ip netns add at_ns0 + ip link add veth0 type veth peer name veth1 + ip link set veth0 netns at_ns0 + ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0 + ip netns exec at_ns0 ip link set dev veth0 up + ip link set dev veth1 up mtu 1500 + ip addr add dev veth1 172.16.1.200/24 +} + +add_gre_tunnel() +{ + # at_ns0 namespace + ip netns exec at_ns0 \ + ip link add dev $DEV_NS type $TYPE seq key 2 \ + local 172.16.1.100 remote 172.16.1.200 + ip netns exec at_ns0 ip link set dev $DEV_NS up + ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 + + # root namespace + ip link add dev $DEV type $TYPE key 2 external + ip link set dev $DEV up + ip addr add dev $DEV 10.1.1.200/24 +} + +add_ip6gretap_tunnel() +{ + + # assign ipv6 address + ip netns exec at_ns0 ip addr add ::11/96 dev veth0 + ip netns exec at_ns0 ip link set dev veth0 up + ip addr add dev veth1 ::22/96 + ip link set dev veth1 up + + # at_ns0 namespace + ip netns exec at_ns0 \ + ip link add dev $DEV_NS type $TYPE seq flowlabel 0xbcdef key 2 \ + local ::11 remote ::22 + + ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 + ip netns exec at_ns0 ip addr add dev $DEV_NS fc80::100/96 + ip netns exec at_ns0 ip link set dev $DEV_NS up + + # root namespace + ip link add dev $DEV type $TYPE external + ip addr add dev $DEV 10.1.1.200/24 + ip addr add dev $DEV fc80::200/24 + ip link set dev $DEV up +} + +add_erspan_tunnel() +{ + # at_ns0 namespace + if [ "$1" == "v1" ]; then + ip netns exec at_ns0 \ + ip link add dev $DEV_NS type $TYPE seq key 2 \ + local 172.16.1.100 remote 172.16.1.200 \ + erspan_ver 1 erspan 123 + else + ip netns exec at_ns0 \ + ip link add dev $DEV_NS type $TYPE seq key 2 \ + local 172.16.1.100 remote 172.16.1.200 \ + erspan_ver 2 erspan_dir egress erspan_hwid 3 + fi + ip netns exec at_ns0 ip link set dev $DEV_NS up + ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 + + # root namespace + ip link add dev $DEV type $TYPE external + ip link set dev $DEV up + ip addr add dev $DEV 10.1.1.200/24 +} + +add_ip6erspan_tunnel() +{ + + # assign ipv6 address + ip netns exec at_ns0 ip addr add ::11/96 dev veth0 + ip netns exec at_ns0 ip link set dev veth0 up + ip addr add dev veth1 ::22/96 + ip link set dev veth1 up + + # at_ns0 namespace + if [ "$1" == "v1" ]; then + ip netns exec at_ns0 \ + ip link add dev $DEV_NS type $TYPE seq key 2 \ + local ::11 remote ::22 \ + erspan_ver 1 erspan 123 + else + ip netns exec at_ns0 \ + ip link add dev $DEV_NS type $TYPE seq key 2 \ + local ::11 remote ::22 \ + erspan_ver 2 erspan_dir egress erspan_hwid 7 + fi + ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 + ip netns exec at_ns0 ip link set dev $DEV_NS up + + # root namespace + ip link add dev $DEV type $TYPE external + ip addr add dev $DEV 10.1.1.200/24 + ip link set dev $DEV up +} + +add_vxlan_tunnel() +{ + # Set static ARP entry here because iptables set-mark works + # on L3 packet, as a result not applying to ARP packets, + # causing errors at get_tunnel_{key/opt}. + + # at_ns0 namespace + ip netns exec at_ns0 \ + ip link add dev $DEV_NS type $TYPE \ + id 2 dstport 4789 gbp remote 172.16.1.200 + ip netns exec at_ns0 \ + ip link set dev $DEV_NS address 52:54:00:d9:01:00 up + ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 + ip netns exec at_ns0 arp -s 10.1.1.200 52:54:00:d9:02:00 + ip netns exec at_ns0 iptables -A OUTPUT -j MARK --set-mark 0x800FF + + # root namespace + ip link add dev $DEV type $TYPE external gbp dstport 4789 + ip link set dev $DEV address 52:54:00:d9:02:00 up + ip addr add dev $DEV 10.1.1.200/24 + arp -s 10.1.1.100 52:54:00:d9:01:00 +} + +add_ip6vxlan_tunnel() +{ + #ip netns exec at_ns0 ip -4 addr del 172.16.1.100 dev veth0 + ip netns exec at_ns0 ip -6 addr add ::11/96 dev veth0 + ip netns exec at_ns0 ip link set dev veth0 up + #ip -4 addr del 172.16.1.200 dev veth1 + ip -6 addr add dev veth1 ::22/96 + ip link set dev veth1 up + + # at_ns0 namespace + ip netns exec at_ns0 \ + ip link add dev $DEV_NS type $TYPE id 22 dstport 4789 \ + local ::11 remote ::22 + ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 + ip netns exec at_ns0 ip link set dev $DEV_NS up + + # root namespace + ip link add dev $DEV type $TYPE external dstport 4789 + ip addr add dev $DEV 10.1.1.200/24 + ip link set dev $DEV up +} + +add_geneve_tunnel() +{ + # at_ns0 namespace + ip netns exec at_ns0 \ + ip link add dev $DEV_NS type $TYPE \ + id 2 dstport 6081 remote 172.16.1.200 + ip netns exec at_ns0 ip link set dev $DEV_NS up + ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 + + # root namespace + ip link add dev $DEV type $TYPE dstport 6081 external + ip link set dev $DEV up + ip addr add dev $DEV 10.1.1.200/24 +} + +add_ip6geneve_tunnel() +{ + ip netns exec at_ns0 ip addr add ::11/96 dev veth0 + ip netns exec at_ns0 ip link set dev veth0 up + ip addr add dev veth1 ::22/96 + ip link set dev veth1 up + + # at_ns0 namespace + ip netns exec at_ns0 \ + ip link add dev $DEV_NS type $TYPE id 22 \ + remote ::22 # geneve has no local option + ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 + ip netns exec at_ns0 ip link set dev $DEV_NS up + + # root namespace + ip link add dev $DEV type $TYPE external + ip addr add dev $DEV 10.1.1.200/24 + ip link set dev $DEV up +} + +add_ipip_tunnel() +{ + # at_ns0 namespace + ip netns exec at_ns0 \ + ip link add dev $DEV_NS type $TYPE \ + local 172.16.1.100 remote 172.16.1.200 + ip netns exec at_ns0 ip link set dev $DEV_NS up + ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 + + # root namespace + ip link add dev $DEV type $TYPE external + ip link set dev $DEV up + ip addr add dev $DEV 10.1.1.200/24 +} + +add_ipip6tnl_tunnel() +{ + ip netns exec at_ns0 ip addr add ::11/96 dev veth0 + ip netns exec at_ns0 ip link set dev veth0 up + ip addr add dev veth1 ::22/96 + ip link set dev veth1 up + + # at_ns0 namespace + ip netns exec at_ns0 \ + ip link add dev $DEV_NS type $TYPE \ + local ::11 remote ::22 + ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24 + ip netns exec at_ns0 ip link set dev $DEV_NS up + + # root namespace + ip link add dev $DEV type $TYPE external + ip addr add dev $DEV 10.1.1.200/24 + ip link set dev $DEV up +} + +test_gre() +{ + TYPE=gretap + DEV_NS=gretap00 + DEV=gretap11 + ret=0 + + check $TYPE + config_device + add_gre_tunnel + attach_bpf $DEV gre_set_tunnel gre_get_tunnel + ping $PING_ARG 10.1.1.100 + check_err $? + ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 + check_err $? + cleanup + + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: $TYPE"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: $TYPE"${NC} +} + +test_ip6gre() +{ + TYPE=ip6gre + DEV_NS=ip6gre00 + DEV=ip6gre11 + ret=0 + + check $TYPE + config_device + # reuse the ip6gretap function + add_ip6gretap_tunnel + attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel + # underlay + ping6 $PING_ARG ::11 + # overlay: ipv4 over ipv6 + ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 + ping $PING_ARG 10.1.1.100 + check_err $? + # overlay: ipv6 over ipv6 + ip netns exec at_ns0 ping6 $PING_ARG fc80::200 + check_err $? + cleanup + + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: $TYPE"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: $TYPE"${NC} +} + +test_ip6gretap() +{ + TYPE=ip6gretap + DEV_NS=ip6gretap00 + DEV=ip6gretap11 + ret=0 + + check $TYPE + config_device + add_ip6gretap_tunnel + attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel + # underlay + ping6 $PING_ARG ::11 + # overlay: ipv4 over ipv6 + ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 + ping $PING_ARG 10.1.1.100 + check_err $? + # overlay: ipv6 over ipv6 + ip netns exec at_ns0 ping6 $PING_ARG fc80::200 + check_err $? + cleanup + + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: $TYPE"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: $TYPE"${NC} +} + +test_erspan() +{ + TYPE=erspan + DEV_NS=erspan00 + DEV=erspan11 + ret=0 + + check $TYPE + config_device + add_erspan_tunnel $1 + attach_bpf $DEV erspan_set_tunnel erspan_get_tunnel + ping $PING_ARG 10.1.1.100 + check_err $? + ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 + check_err $? + cleanup + + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: $TYPE"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: $TYPE"${NC} +} + +test_ip6erspan() +{ + TYPE=ip6erspan + DEV_NS=ip6erspan00 + DEV=ip6erspan11 + ret=0 + + check $TYPE + config_device + add_ip6erspan_tunnel $1 + attach_bpf $DEV ip4ip6erspan_set_tunnel ip4ip6erspan_get_tunnel + ping6 $PING_ARG ::11 + ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 + check_err $? + cleanup + + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: $TYPE"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: $TYPE"${NC} +} + +test_vxlan() +{ + TYPE=vxlan + DEV_NS=vxlan00 + DEV=vxlan11 + ret=0 + + check $TYPE + config_device + add_vxlan_tunnel + attach_bpf $DEV vxlan_set_tunnel vxlan_get_tunnel + ping $PING_ARG 10.1.1.100 + check_err $? + ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 + check_err $? + cleanup + + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: $TYPE"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: $TYPE"${NC} +} + +test_ip6vxlan() +{ + TYPE=vxlan + DEV_NS=ip6vxlan00 + DEV=ip6vxlan11 + ret=0 + + check $TYPE + config_device + add_ip6vxlan_tunnel + ip link set dev veth1 mtu 1500 + attach_bpf $DEV ip6vxlan_set_tunnel ip6vxlan_get_tunnel + # underlay + ping6 $PING_ARG ::11 + # ip4 over ip6 + ping $PING_ARG 10.1.1.100 + check_err $? + ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 + check_err $? + cleanup + + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: ip6$TYPE"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: ip6$TYPE"${NC} +} + +test_geneve() +{ + TYPE=geneve + DEV_NS=geneve00 + DEV=geneve11 + ret=0 + + check $TYPE + config_device + add_geneve_tunnel + attach_bpf $DEV geneve_set_tunnel geneve_get_tunnel + ping $PING_ARG 10.1.1.100 + check_err $? + ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 + check_err $? + cleanup + + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: $TYPE"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: $TYPE"${NC} +} + +test_ip6geneve() +{ + TYPE=geneve + DEV_NS=ip6geneve00 + DEV=ip6geneve11 + ret=0 + + check $TYPE + config_device + add_ip6geneve_tunnel + attach_bpf $DEV ip6geneve_set_tunnel ip6geneve_get_tunnel + ping $PING_ARG 10.1.1.100 + check_err $? + ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 + check_err $? + cleanup + + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: ip6$TYPE"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: ip6$TYPE"${NC} +} + +test_ipip() +{ + TYPE=ipip + DEV_NS=ipip00 + DEV=ipip11 + ret=0 + + check $TYPE + config_device + add_ipip_tunnel + ip link set dev veth1 mtu 1500 + attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel + ping $PING_ARG 10.1.1.100 + check_err $? + ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 + check_err $? + cleanup + + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: $TYPE"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: $TYPE"${NC} +} + +test_ipip6() +{ + TYPE=ip6tnl + DEV_NS=ipip6tnl00 + DEV=ipip6tnl11 + ret=0 + + check $TYPE + config_device + add_ipip6tnl_tunnel + ip link set dev veth1 mtu 1500 + attach_bpf $DEV ipip6_set_tunnel ipip6_get_tunnel + # underlay + ping6 $PING_ARG ::11 + # ip4 over ip6 + ping $PING_ARG 10.1.1.100 + check_err $? + ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 + check_err $? + cleanup + + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: $TYPE"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: $TYPE"${NC} +} + +setup_xfrm_tunnel() +{ + auth=0x$(printf '1%.0s' {1..40}) + enc=0x$(printf '2%.0s' {1..32}) + spi_in_to_out=0x1 + spi_out_to_in=0x2 + # at_ns0 namespace + # at_ns0 -> root + ip netns exec at_ns0 \ + ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \ + spi $spi_in_to_out reqid 1 mode tunnel \ + auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc + ip netns exec at_ns0 \ + ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir out \ + tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \ + mode tunnel + # root -> at_ns0 + ip netns exec at_ns0 \ + ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \ + spi $spi_out_to_in reqid 2 mode tunnel \ + auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc + ip netns exec at_ns0 \ + ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir in \ + tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \ + mode tunnel + # address & route + ip netns exec at_ns0 \ + ip addr add dev veth0 10.1.1.100/32 + ip netns exec at_ns0 \ + ip route add 10.1.1.200 dev veth0 via 172.16.1.200 \ + src 10.1.1.100 + + # root namespace + # at_ns0 -> root + ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \ + spi $spi_in_to_out reqid 1 mode tunnel \ + auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc + ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir in \ + tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \ + mode tunnel + # root -> at_ns0 + ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \ + spi $spi_out_to_in reqid 2 mode tunnel \ + auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc + ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir out \ + tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \ + mode tunnel + # address & route + ip addr add dev veth1 10.1.1.200/32 + ip route add 10.1.1.100 dev veth1 via 172.16.1.100 src 10.1.1.200 +} + +test_xfrm_tunnel() +{ + config_device + #tcpdump -nei veth1 ip & + output=$(mktemp) + cat /sys/kernel/debug/tracing/trace_pipe | tee $output & + setup_xfrm_tunnel + tc qdisc add dev veth1 clsact + tc filter add dev veth1 proto ip ingress bpf da obj test_tunnel_kern.o \ + sec xfrm_get_state + ip netns exec at_ns0 ping $PING_ARG 10.1.1.200 + sleep 1 + grep "reqid 1" $output + check_err $? + grep "spi 0x1" $output + check_err $? + grep "remote ip 0xac100164" $output + check_err $? + cleanup + + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: xfrm tunnel"${NC} + return 1 + fi + echo -e ${GREEN}"PASS: xfrm tunnel"${NC} +} + +attach_bpf() +{ + DEV=$1 + SET=$2 + GET=$3 + tc qdisc add dev $DEV clsact + tc filter add dev $DEV egress bpf da obj test_tunnel_kern.o sec $SET + tc filter add dev $DEV ingress bpf da obj test_tunnel_kern.o sec $GET +} + +cleanup() +{ + ip netns delete at_ns0 2> /dev/null + ip link del veth1 2> /dev/null + ip link del ipip11 2> /dev/null + ip link del ipip6tnl11 2> /dev/null + ip link del gretap11 2> /dev/null + ip link del ip6gre11 2> /dev/null + ip link del ip6gretap11 2> /dev/null + ip link del vxlan11 2> /dev/null + ip link del ip6vxlan11 2> /dev/null + ip link del geneve11 2> /dev/null + ip link del ip6geneve11 2> /dev/null + ip link del erspan11 2> /dev/null + ip link del ip6erspan11 2> /dev/null +} + +cleanup_exit() +{ + echo "CATCH SIGKILL or SIGINT, cleanup and exit" + cleanup + exit 0 +} + +check() +{ + ip link help $1 2>&1 | grep -q "^Usage:" + if [ $? -ne 0 ];then + echo "SKIP $1: iproute2 not support" + cleanup + return 1 + fi +} + +enable_debug() +{ + echo 'file ip_gre.c +p' > /sys/kernel/debug/dynamic_debug/control + echo 'file ip6_gre.c +p' > /sys/kernel/debug/dynamic_debug/control + echo 'file vxlan.c +p' > /sys/kernel/debug/dynamic_debug/control + echo 'file geneve.c +p' > /sys/kernel/debug/dynamic_debug/control + echo 'file ipip.c +p' > /sys/kernel/debug/dynamic_debug/control +} + +check_err() +{ + if [ $ret -eq 0 ]; then + ret=$1 + fi +} + +bpf_tunnel_test() +{ + echo "Testing GRE tunnel..." + test_gre + echo "Testing IP6GRE tunnel..." + test_ip6gre + echo "Testing IP6GRETAP tunnel..." + test_ip6gretap + echo "Testing ERSPAN tunnel..." + test_erspan v2 + echo "Testing IP6ERSPAN tunnel..." + test_ip6erspan v2 + echo "Testing VXLAN tunnel..." + test_vxlan + echo "Testing IP6VXLAN tunnel..." + test_ip6vxlan + echo "Testing GENEVE tunnel..." + test_geneve + echo "Testing IP6GENEVE tunnel..." + test_ip6geneve + echo "Testing IPIP tunnel..." + test_ipip + echo "Testing IPIP6 tunnel..." + test_ipip6 + echo "Testing IPSec tunnel..." + test_xfrm_tunnel +} + +trap cleanup 0 3 6 +trap cleanup_exit 2 9 + +cleanup +bpf_tunnel_test + +exit 0 diff --git a/tools/testing/selftests/bpf/test_tunnel_kern.c b/tools/testing/selftests/bpf/test_tunnel_kern.c new file mode 100644 index 000000000000..504df69c83df --- /dev/null +++ b/tools/testing/selftests/bpf/test_tunnel_kern.c @@ -0,0 +1,713 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2016 VMware + * Copyright (c) 2016 Facebook + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ +#include <stddef.h> +#include <string.h> +#include <arpa/inet.h> +#include <linux/bpf.h> +#include <linux/if_ether.h> +#include <linux/if_packet.h> +#include <linux/ip.h> +#include <linux/ipv6.h> +#include <linux/types.h> +#include <linux/tcp.h> +#include <linux/socket.h> +#include <linux/pkt_cls.h> +#include <linux/erspan.h> +#include "bpf_helpers.h" +#include "bpf_endian.h" + +#define ERROR(ret) do {\ + char fmt[] = "ERROR line:%d ret:%d\n";\ + bpf_trace_printk(fmt, sizeof(fmt), __LINE__, ret); \ + } while (0) + +int _version SEC("version") = 1; + +struct geneve_opt { + __be16 opt_class; + __u8 type; + __u8 length:5; + __u8 r3:1; + __u8 r2:1; + __u8 r1:1; + __u8 opt_data[8]; /* hard-coded to 8 byte */ +}; + +struct vxlan_metadata { + __u32 gbp; +}; + +SEC("gre_set_tunnel") +int _gre_set_tunnel(struct __sk_buff *skb) +{ + int ret; + struct bpf_tunnel_key key; + + __builtin_memset(&key, 0x0, sizeof(key)); + key.remote_ipv4 = 0xac100164; /* 172.16.1.100 */ + key.tunnel_id = 2; + key.tunnel_tos = 0; + key.tunnel_ttl = 64; + + ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), + BPF_F_ZERO_CSUM_TX | BPF_F_SEQ_NUMBER); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + return TC_ACT_OK; +} + +SEC("gre_get_tunnel") +int _gre_get_tunnel(struct __sk_buff *skb) +{ + int ret; + struct bpf_tunnel_key key; + char fmt[] = "key %d remote ip 0x%x\n"; + + ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + bpf_trace_printk(fmt, sizeof(fmt), key.tunnel_id, key.remote_ipv4); + return TC_ACT_OK; +} + +SEC("ip6gretap_set_tunnel") +int _ip6gretap_set_tunnel(struct __sk_buff *skb) +{ + struct bpf_tunnel_key key; + int ret; + + __builtin_memset(&key, 0x0, sizeof(key)); + key.remote_ipv6[3] = bpf_htonl(0x11); /* ::11 */ + key.tunnel_id = 2; + key.tunnel_tos = 0; + key.tunnel_ttl = 64; + key.tunnel_label = 0xabcde; + + ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), + BPF_F_TUNINFO_IPV6 | BPF_F_ZERO_CSUM_TX | + BPF_F_SEQ_NUMBER); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + return TC_ACT_OK; +} + +SEC("ip6gretap_get_tunnel") +int _ip6gretap_get_tunnel(struct __sk_buff *skb) +{ + char fmt[] = "key %d remote ip6 ::%x label %x\n"; + struct bpf_tunnel_key key; + int ret; + + ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), + BPF_F_TUNINFO_IPV6); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + bpf_trace_printk(fmt, sizeof(fmt), + key.tunnel_id, key.remote_ipv6[3], key.tunnel_label); + + return TC_ACT_OK; +} + +SEC("erspan_set_tunnel") +int _erspan_set_tunnel(struct __sk_buff *skb) +{ + struct bpf_tunnel_key key; + struct erspan_metadata md; + int ret; + + __builtin_memset(&key, 0x0, sizeof(key)); + key.remote_ipv4 = 0xac100164; /* 172.16.1.100 */ + key.tunnel_id = 2; + key.tunnel_tos = 0; + key.tunnel_ttl = 64; + + ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), + BPF_F_ZERO_CSUM_TX); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + __builtin_memset(&md, 0, sizeof(md)); +#ifdef ERSPAN_V1 + md.version = 1; + md.u.index = bpf_htonl(123); +#else + __u8 direction = 1; + __u8 hwid = 7; + + md.version = 2; + md.u.md2.dir = direction; + md.u.md2.hwid = hwid & 0xf; + md.u.md2.hwid_upper = (hwid >> 4) & 0x3; +#endif + + ret = bpf_skb_set_tunnel_opt(skb, &md, sizeof(md)); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + return TC_ACT_OK; +} + +SEC("erspan_get_tunnel") +int _erspan_get_tunnel(struct __sk_buff *skb) +{ + char fmt[] = "key %d remote ip 0x%x erspan version %d\n"; + struct bpf_tunnel_key key; + struct erspan_metadata md; + __u32 index; + int ret; + + ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + ret = bpf_skb_get_tunnel_opt(skb, &md, sizeof(md)); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + bpf_trace_printk(fmt, sizeof(fmt), + key.tunnel_id, key.remote_ipv4, md.version); + +#ifdef ERSPAN_V1 + char fmt2[] = "\tindex %x\n"; + + index = bpf_ntohl(md.u.index); + bpf_trace_printk(fmt2, sizeof(fmt2), index); +#else + char fmt2[] = "\tdirection %d hwid %x timestamp %u\n"; + + bpf_trace_printk(fmt2, sizeof(fmt2), + md.u.md2.dir, + (md.u.md2.hwid_upper << 4) + md.u.md2.hwid, + bpf_ntohl(md.u.md2.timestamp)); +#endif + + return TC_ACT_OK; +} + +SEC("ip4ip6erspan_set_tunnel") +int _ip4ip6erspan_set_tunnel(struct __sk_buff *skb) +{ + struct bpf_tunnel_key key; + struct erspan_metadata md; + int ret; + + __builtin_memset(&key, 0x0, sizeof(key)); + key.remote_ipv6[3] = bpf_htonl(0x11); + key.tunnel_id = 2; + key.tunnel_tos = 0; + key.tunnel_ttl = 64; + + ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), + BPF_F_TUNINFO_IPV6); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + __builtin_memset(&md, 0, sizeof(md)); + +#ifdef ERSPAN_V1 + md.u.index = bpf_htonl(123); + md.version = 1; +#else + __u8 direction = 0; + __u8 hwid = 17; + + md.version = 2; + md.u.md2.dir = direction; + md.u.md2.hwid = hwid & 0xf; + md.u.md2.hwid_upper = (hwid >> 4) & 0x3; +#endif + + ret = bpf_skb_set_tunnel_opt(skb, &md, sizeof(md)); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + return TC_ACT_OK; +} + +SEC("ip4ip6erspan_get_tunnel") +int _ip4ip6erspan_get_tunnel(struct __sk_buff *skb) +{ + char fmt[] = "ip6erspan get key %d remote ip6 ::%x erspan version %d\n"; + struct bpf_tunnel_key key; + struct erspan_metadata md; + __u32 index; + int ret; + + ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), + BPF_F_TUNINFO_IPV6); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + ret = bpf_skb_get_tunnel_opt(skb, &md, sizeof(md)); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + bpf_trace_printk(fmt, sizeof(fmt), + key.tunnel_id, key.remote_ipv4, md.version); + +#ifdef ERSPAN_V1 + char fmt2[] = "\tindex %x\n"; + + index = bpf_ntohl(md.u.index); + bpf_trace_printk(fmt2, sizeof(fmt2), index); +#else + char fmt2[] = "\tdirection %d hwid %x timestamp %u\n"; + + bpf_trace_printk(fmt2, sizeof(fmt2), + md.u.md2.dir, + (md.u.md2.hwid_upper << 4) + md.u.md2.hwid, + bpf_ntohl(md.u.md2.timestamp)); +#endif + + return TC_ACT_OK; +} + +SEC("vxlan_set_tunnel") +int _vxlan_set_tunnel(struct __sk_buff *skb) +{ + int ret; + struct bpf_tunnel_key key; + struct vxlan_metadata md; + + __builtin_memset(&key, 0x0, sizeof(key)); + key.remote_ipv4 = 0xac100164; /* 172.16.1.100 */ + key.tunnel_id = 2; + key.tunnel_tos = 0; + key.tunnel_ttl = 64; + + ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), + BPF_F_ZERO_CSUM_TX); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + md.gbp = 0x800FF; /* Set VXLAN Group Policy extension */ + ret = bpf_skb_set_tunnel_opt(skb, &md, sizeof(md)); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + return TC_ACT_OK; +} + +SEC("vxlan_get_tunnel") +int _vxlan_get_tunnel(struct __sk_buff *skb) +{ + int ret; + struct bpf_tunnel_key key; + struct vxlan_metadata md; + char fmt[] = "key %d remote ip 0x%x vxlan gbp 0x%x\n"; + + ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + ret = bpf_skb_get_tunnel_opt(skb, &md, sizeof(md)); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + bpf_trace_printk(fmt, sizeof(fmt), + key.tunnel_id, key.remote_ipv4, md.gbp); + + return TC_ACT_OK; +} + +SEC("ip6vxlan_set_tunnel") +int _ip6vxlan_set_tunnel(struct __sk_buff *skb) +{ + struct bpf_tunnel_key key; + int ret; + + __builtin_memset(&key, 0x0, sizeof(key)); + key.remote_ipv6[3] = bpf_htonl(0x11); /* ::11 */ + key.tunnel_id = 22; + key.tunnel_tos = 0; + key.tunnel_ttl = 64; + + ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), + BPF_F_TUNINFO_IPV6); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + return TC_ACT_OK; +} + +SEC("ip6vxlan_get_tunnel") +int _ip6vxlan_get_tunnel(struct __sk_buff *skb) +{ + char fmt[] = "key %d remote ip6 ::%x label %x\n"; + struct bpf_tunnel_key key; + int ret; + + ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), + BPF_F_TUNINFO_IPV6); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + bpf_trace_printk(fmt, sizeof(fmt), + key.tunnel_id, key.remote_ipv6[3], key.tunnel_label); + + return TC_ACT_OK; +} + +SEC("geneve_set_tunnel") +int _geneve_set_tunnel(struct __sk_buff *skb) +{ + int ret, ret2; + struct bpf_tunnel_key key; + struct geneve_opt gopt; + + __builtin_memset(&key, 0x0, sizeof(key)); + key.remote_ipv4 = 0xac100164; /* 172.16.1.100 */ + key.tunnel_id = 2; + key.tunnel_tos = 0; + key.tunnel_ttl = 64; + + __builtin_memset(&gopt, 0x0, sizeof(gopt)); + gopt.opt_class = bpf_htons(0x102); /* Open Virtual Networking (OVN) */ + gopt.type = 0x08; + gopt.r1 = 0; + gopt.r2 = 0; + gopt.r3 = 0; + gopt.length = 2; /* 4-byte multiple */ + *(int *) &gopt.opt_data = bpf_htonl(0xdeadbeef); + + ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), + BPF_F_ZERO_CSUM_TX); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + ret = bpf_skb_set_tunnel_opt(skb, &gopt, sizeof(gopt)); + if (ret < 0) { + ERROR(ret); + return TC_ACT_SHOT; + } + + return TC_ACT_OK; +} + +SEC("geneve_get_tunnel") +int _geneve_get_tunnel(struct __sk_buff *skb) +{ + int ret; + struct bpf_tunnel_key key; + struct geneve_opt gopt; + char fmt[] |