Merge tag 'regulator-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The bulk of the standout changes in this release are cleanups, with
  the core work being a combination of factoring out common code into
  helpers and the completion of the conversion of the core to use GPIO
  descriptors.

  Summary:

   - Addition of helper functions for current limits and conversion of
     drivers to use them by Axel Lin.

   - Lots and lots of cleanups from Axel Lin.

   - Conversion of the core to use GPIO descriptors rather than numbers
     by Linus Walleij.

   - New drivers for Maxim MAX77650 and ROHM BD70528"

* tag 'regulator-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (131 commits)
  regulator: mc13xxx: Constify regulator_ops variables
  regulator: palmas: Constify palmas_smps_ramp_delay array
  regulator: wm831x-dcdc: Convert to use regulator_set/get_current_limit_regmap
  regulator: pv88090: Convert to use regulator_set/get_current_limit_regmap
  regulator: pv88080: Convert to use regulator_set/get_current_limit_regmap
  regulator: pv88060: Convert to use regulator_set/get_current_limit_regmap
  regulator: max77650: Convert to use regulator_set/get_current_limit_regmap
  regulator: lp873x: Convert to use regulator_set/get_current_limit_regmap
  regulator: lp872x: Convert to use regulator_set/get_current_limit_regmap
  regulator: da9210: Convert to use regulator_set/get_current_limit_regmap
  regulator: da9055: Convert to use regulator_set/get_current_limit_regmap
  regulator: core: Add set/get_current_limit helpers for regmap users
  regulator: Fix comment for csel_reg and csel_mask
  regulator: stm32-vrefbuf: add power management support
  regulator: 88pm8607: Remove unused fields from struct pm8607_regulator_info
  regulator: 88pm8607: Simplify pm8607_list_voltage implementation
  regulator: cpcap: Constify omap4_regulators and xoom_regulators
  regulator: cpcap: Remove unused vsel_shift from struct cpcap_regulator
  dt-bindings: regulator: tps65218: rectify units of LS3
  dt-bindings: regulator: add LS2 load switch documentation
  ...

65 files changed, 2185 insertions, 1412 deletions

diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index 28f55248eb90..753a6a1b30c3 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/err.h>
-#include <linux/i2c.h>
 #include <linux/of.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/platform_device.h>
@@ -22,12 +21,7 @@
 
 struct pm8607_regulator_info {
 	struct regulator_desc	desc;
-	struct pm860x_chip	*chip;
-	struct regulator_dev	*regulator;
-	struct i2c_client	*i2c;
-	struct i2c_client	*i2c_8606;
 
-	unsigned int	*vol_table;
 	unsigned int	*vol_suspend;
 
 	int	slope_double;
@@ -210,13 +204,15 @@ static const unsigned int LDO14_suspend_table[] = {
 static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
 {
 	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
-	int ret = -EINVAL;
+	int ret;
+
+	ret = regulator_list_voltage_table(rdev, index);
+	if (ret < 0)
+		return ret;
+
+	if (info->slope_double)
+		ret <<= 1;
 
-	if (info->vol_table && (index < rdev->desc->n_voltages)) {
-		ret = info->vol_table[index];
-		if (info->slope_double)
-			ret <<= 1;
-	}
 	return ret;
 }
 
@@ -257,6 +253,7 @@ static const struct regulator_ops pm8606_preg_ops = {
 		.type	= REGULATOR_VOLTAGE,				\
 		.id	= PM8607_ID_##vreg,				\
 		.owner	= THIS_MODULE,					\
+		.volt_table = vreg##_table,				\
 		.n_voltages = ARRAY_SIZE(vreg##_table),			\
 		.vsel_reg = PM8607_##vreg,				\
 		.vsel_mask = ARRAY_SIZE(vreg##_table) - 1,		\
@@ -266,7 +263,6 @@ static const struct regulator_ops pm8606_preg_ops = {
 		.enable_mask = 1 << (ebit),				\
 	},								\
 	.slope_double	= (0),						\
-	.vol_table	= (unsigned int *)&vreg##_table,		\
 	.vol_suspend	= (unsigned int *)&vreg##_suspend_table,	\
 }
 
@@ -278,6 +274,7 @@ static const struct regulator_ops pm8606_preg_ops = {
 		.type	= REGULATOR_VOLTAGE,				\
 		.id	= PM8607_ID_LDO##_id,				\
 		.owner	= THIS_MODULE,					\
+		.volt_table = LDO##_id##_table,				\
 		.n_voltages = ARRAY_SIZE(LDO##_id##_table),		\
 		.vsel_reg = PM8607_##vreg,				\
 		.vsel_mask = (ARRAY_SIZE(LDO##_id##_table) - 1) << (shift), \
@@ -285,7 +282,6 @@ static const struct regulator_ops pm8606_preg_ops = {
 		.enable_mask = 1 << (ebit),				\
 	},								\
 	.slope_double	= (0),						\
-	.vol_table	= (unsigned int *)&LDO##_id##_table,		\
 	.vol_suspend	= (unsigned int *)&LDO##_id##_suspend_table,	\
 }
 
@@ -349,6 +345,7 @@ static int pm8607_regulator_probe(struct platform_device *pdev)
 	struct pm8607_regulator_info *info = NULL;
 	struct regulator_init_data *pdata = dev_get_platdata(&pdev->dev);
 	struct regulator_config config = { };
+	struct regulator_dev *rdev;
 	struct resource *res;
 	int i;
 
@@ -371,13 +368,9 @@ static int pm8607_regulator_probe(struct platform_device *pdev)
 		/* i is used to check regulator ID */
 		i = -1;
 	}
-	info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
-	info->i2c_8606 = (chip->id == CHIP_PM8607) ? chip->companion :
-			chip->client;
-	info->chip = chip;
 
 	/* check DVC ramp slope double */
-	if ((i == PM8607_ID_BUCK3) && info->chip->buck3_double)
+	if ((i == PM8607_ID_BUCK3) && chip->buck3_double)
 		info->slope_double = 1;
 
 	config.dev = &pdev->dev;
@@ -392,12 +385,11 @@ static int pm8607_regulator_probe(struct platform_device *pdev)
 	else
 		config.regmap = chip->regmap_companion;
 
-	info->regulator = devm_regulator_register(&pdev->dev, &info->desc,
-						  &config);
-	if (IS_ERR(info->regulator)) {
+	rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
+	if (IS_ERR(rdev)) {
 		dev_err(&pdev->dev, "failed to register regulator %s\n",
 			info->desc.name);
-		return PTR_ERR(info->regulator);
+		return PTR_ERR(rdev);
 	}
 
 	platform_set_drvdata(pdev, info);
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index ee60a222f5eb..b7f249ee5e68 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -180,6 +180,17 @@ config REGULATOR_BCM590XX
 	  BCM590xx PMUs. This will enable support for the software
 	  controllable LDO/Switching regulators.
 
+config REGULATOR_BD70528
+	tristate "ROHM BD70528 Power Regulator"
+	depends on MFD_ROHM_BD70528
+	help
+	  This driver supports voltage regulators on ROHM BD70528 PMIC.
+	  This will enable support for the software controllable buck
+	  and LDO regulators.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called bd70528-regulator.
+
 config REGULATOR_BD718XX
 	tristate "ROHM BD71837 Power Regulator"
 	depends on MFD_ROHM_BD718XX
@@ -457,6 +468,14 @@ config REGULATOR_MAX77620
 	  chip to control Step-Down DC-DC and LDOs. Say Y here to
 	  enable the regulator driver.
 
+config REGULATOR_MAX77650
+	tristate "Maxim MAX77650/77651 regulator support"
+	depends on MFD_MAX77650
+	help
+	  Regulator driver for MAX77650/77651 PMIC from Maxim
+	  Semiconductor. This device has a SIMO with three independent
+	  power rails and an LDO.
+
 config REGULATOR_MAX8649
 	tristate "Maxim 8649 voltage regulator"
 	depends on I2C
@@ -484,7 +503,7 @@ config REGULATOR_MAX8925
 	tristate "Maxim MAX8925 Power Management IC"
 	depends on MFD_MAX8925
 	help
-	  Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
+	  Say y here to support the voltage regulator of Maxim MAX8925 PMIC.
 
 config REGULATOR_MAX8952
 	tristate "Maxim MAX8952 Power Management IC"
@@ -501,7 +520,7 @@ config REGULATOR_MAX8973
 	select REGMAP_I2C
 	help
 	  The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
-	  switching regulator delievers up to 9A of output current. Each
+	  switching regulator delivers up to 9A of output current. Each
 	  phase operates at a 2MHz fixed frequency with a 120 deg shift
 	  from the adjacent phase, allowing the use of small magnetic component.
 
@@ -646,7 +665,7 @@ config REGULATOR_PCF50633
 	tristate "NXP PCF50633 regulator driver"
 	depends on MFD_PCF50633
 	help
-	 Say Y here to support the voltage regulators and convertors
+	 Say Y here to support the voltage regulators and converters
 	 on PCF50633
 
 config REGULATOR_PFUZE100
@@ -924,7 +943,7 @@ config REGULATOR_TPS65132
 	select REGMAP_I2C
 	help
 	  This driver supports TPS65132 single inductor - dual output
-	  power supply specifcally designed for display panels.
+	  power supply specifically designed for display panels.
 
 config REGULATOR_TPS65217
 	tristate "TI TPS65217 Power regulators"
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index b12e1c9b2118..1169f8a27d91 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
 obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
 obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
 obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
+obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o
 obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o
 obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
@@ -60,6 +61,7 @@ obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
 obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
+obj-$(CONFIG_REGULATOR_MAX77650) += max77650-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
 obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 21e20483bd91..e0239cf3f56d 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -131,7 +131,7 @@
  * ACT8865 voltage number
  */
 #define	ACT8865_VOLTAGE_NUM	64
-#define ACT8600_SUDCDC_VOLTAGE_NUM	255
+#define ACT8600_SUDCDC_VOLTAGE_NUM	256
 
 struct act8865 {
 	struct regmap *regmap;
@@ -222,7 +222,8 @@ static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
 	REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
 	REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
 	REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),
-	REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),
+	REGULATOR_LINEAR_RANGE(19000000, 192, 247, 400000),
+	REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
 };
 
 static struct regulator_ops act8865_ops = {
diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c
index 603db77723b6..caa61d306a69 100644
--- a/drivers/regulator/act8945a-regulator.c
+++ b/drivers/regulator/act8945a-regulator.c
@@ -87,7 +87,8 @@ static const struct regulator_linear_range act8945a_voltage_ranges[] = {
 static int act8945a_set_suspend_state(struct regulator_dev *rdev, bool enable)
 {
 	struct regmap *regmap = rdev->regmap;
-	int id = rdev->desc->id, reg, val;
+	int id = rdev_get_id(rdev);
+	int reg, val;
 
 	switch (id) {
 	case ACT8945A_ID_DCDC1:
@@ -159,7 +160,7 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
 {
 	struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
 	struct regmap *regmap = rdev->regmap;
-	int id = rdev->desc->id;
+	int id = rdev_get_id(rdev);
 	int reg, ret, val = 0;
 
 	switch (id) {
@@ -190,11 +191,11 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
 
 	switch (mode) {
 	case REGULATOR_MODE_STANDBY:
-		if (rdev->desc->id > ACT8945A_ID_DCDC3)
+		if (id > ACT8945A_ID_DCDC3)
 			val = BIT(5);
 		break;
 	case REGULATOR_MODE_NORMAL:
-		if (rdev->desc->id <= ACT8945A_ID_DCDC3)
+		if (id <= ACT8945A_ID_DCDC3)
 			val = BIT(5);
 		break;
 	default:
@@ -213,7 +214,7 @@ static int act8945a_set_mode(struct regulator_dev *rdev, unsigned int mode)
 static unsigned int act8945a_get_mode(struct regulator_dev *rdev)
 {
 	struct act8945a_pmic *act8945a = rdev_get_drvdata(rdev);
-	int id = rdev->desc->id;
+	int id = rdev_get_id(rdev);
 
 	if (id < ACT8945A_ID_DCDC1 || id >= ACT8945A_ID_MAX)
 		return -EINVAL;
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index b9a93049e41e..bf3ab405eed1 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -40,35 +40,10 @@ struct arizona_ldo1 {
 	struct gpio_desc *ena_gpiod;
 };
 
-static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
-					unsigned int selector)
-{
-	if (selector >= rdev->desc->n_voltages)
-		return -EINVAL;
-
-	if (selector == rdev->desc->n_voltages - 1)
-		return 1800000;
-	else
-		return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
-}
-
-static int arizona_ldo1_hc_map_voltage(struct regulator_dev *rdev,
-				       int min_uV, int max_uV)
-{
-	int sel;
-
-	sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
-	if (sel >= rdev->desc->n_voltages)
-		sel = rdev->desc->n_voltages - 1;
-
-	return sel;
-}
-
 static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
 					   unsigned sel)
 {
-	struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
-	struct regmap *regmap = ldo->regmap;
+	struct regmap *regmap = rdev_get_regmap(rdev);
 	unsigned int val;
 	int ret;
 
@@ -85,16 +60,12 @@ static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
 	if (val)
 		return 0;
 
-	val = sel << ARIZONA_LDO1_VSEL_SHIFT;
-
-	return regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_1,
-				  ARIZONA_LDO1_VSEL_MASK, val);
+	return regulator_set_voltage_sel_regmap(rdev, sel);
 }
 
 static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
 {
-	struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
-	struct regmap *regmap = ldo->regmap;
+	struct regmap *regmap = rdev_get_regmap(rdev);
 	unsigned int val;
 	int ret;
 
@@ -105,32 +76,35 @@ static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
 	if (val & ARIZONA_LDO1_HI_PWR)
 		return rdev->desc->n_voltages - 1;
 
-	ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_1, &val);
-	if (ret != 0)
-		return ret;
-
-	return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT;
+	return regulator_get_voltage_sel_regmap(rdev);
 }
 
 static const struct regulator_ops arizona_ldo1_hc_ops = {
-	.list_voltage = arizona_ldo1_hc_list_voltage,
-	.map_voltage = arizona_ldo1_hc_map_voltage,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
 	.get_voltage_sel = arizona_ldo1_hc_get_voltage_sel,
 	.set_voltage_sel = arizona_ldo1_hc_set_voltage_sel,
 	.get_bypass = regulator_get_bypass_regmap,
 	.set_bypass = regulator_set_bypass_regmap,
 };
 
+static const struct regulator_linear_range arizona_ldo1_hc_ranges[] = {
+	REGULATOR_LINEAR_RANGE(900000, 0, 0x6, 50000),
+	REGULATOR_LINEAR_RANGE(1800000, 0x7, 0x7, 0),
+};
+
 static const struct regulator_desc arizona_ldo1_hc = {
 	.name = "LDO1",
 	.supply_name = "LDOVDD",
 	.type = REGULATOR_VOLTAGE,
 	.ops = &arizona_ldo1_hc_ops,
 
+	.vsel_reg = ARIZONA_LDO1_CONTROL_1,
+	.vsel_mask = ARIZONA_LDO1_VSEL_MASK,
 	.bypass_reg = ARIZONA_LDO1_CONTROL_1,
 	.bypass_mask = ARIZONA_LDO1_BYPASS,
-	.min_uV = 900000,
-	.uV_step = 50000,
+	.linear_ranges = arizona_ldo1_hc_ranges,
+	.n_linear_ranges = ARRAY_SIZE(arizona_ldo1_hc_ranges),
 	.n_voltages = 8,
 	.enable_time = 1500,
 	.ramp_delay = 24000,
diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c
index 66337e12719b..e5fed289b52d 100644
--- a/drivers/regulator/as3722-regulator.c
+++ b/drivers/regulator/as3722-regulator.c
@@ -886,7 +886,7 @@ static int as3722_regulator_probe(struct platform_device *pdev)
 				as3722_regs->desc[id].min_uV = 410000;
 			} else {
 				as3722_regs->desc[id].n_voltages =
-					AS3722_SD0_VSEL_MAX + 1,
+					AS3722_SD0_VSEL_MAX + 1;
 				as3722_regs->desc[id].min_uV = 610000;
 			}
 			as3722_regs->desc[id].uV_step = 10000;
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 48af859fd053..fba8f58ab769 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -367,13 +367,12 @@ static const int axp209_dcdc2_ldo3_slew_rates[] = {
 static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp)
 {
 	struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
-	const struct regulator_desc *desc = rdev->desc;
+	const struct regulator_desc *desc;
 	u8 reg, mask, enable, cfg = 0xff;
 	const int *slew_rates;
 	int rate_count = 0;
 
-	if (!rdev)
-		return -EINVAL;
+	desc = rdev->desc;
 
 	switch (axp20x->variant) {
 	case AXP209_ID:
@@ -436,11 +435,13 @@ static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp)
 static int axp20x_regulator_enable_regmap(struct regulator_dev *rdev)
 {
 	struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
-	const struct regulator_desc *desc = rdev->desc;
+	const struct regulator_desc *desc;
 
 	if (!rdev)
 		return -EINVAL;
 
+	desc = rdev->desc;
+
 	switch (axp20x->variant) {
 	case AXP209_ID:
 		if ((desc->id == AXP20X_LDO3) &&
@@ -573,7 +574,7 @@ static const struct regulator_desc axp22x_regulators[] = {
 		 AXP22X_DCDC3_V_OUT, AXP22X_DCDC3_V_OUT_MASK,
 		 AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC3_MASK),
 	AXP_DESC(AXP22X, DCDC4, "dcdc4", "vin4", 600, 1540, 20,
-		 AXP22X_DCDC4_V_OUT, AXP22X_DCDC4_V_OUT,
+		 AXP22X_DCDC4_V_OUT, AXP22X_DCDC4_V_OUT_MASK,
 		 AXP22X_PWR_OUT_CTRL1, AXP22X_PWR_OUT_DCDC4_MASK),
 	AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
 		 AXP22X_DCDC5_V_OUT, AXP22X_DCDC5_V_OUT_MASK,
@@ -719,7 +720,7 @@ static const struct regulator_desc axp803_regulators[] = {
 		 AXP22X_ALDO1_V_OUT, AXP22X_ALDO1_V_OUT_MASK,
 		 AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO1_MASK),
 	AXP_DESC(AXP803, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
-		 AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT,
+		 AXP22X_ALDO2_V_OUT, AXP22X_ALDO2_V_OUT_MASK,
 		 AXP22X_PWR_OUT_CTRL3, AXP806_PWR_OUT_ALDO2_MASK),
 	AXP_DESC(AXP803, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
 		 AXP22X_ALDO3_V_OUT, AXP22X_ALDO3_V_OUT_MASK,
@@ -729,7 +730,7 @@ static const struct regulator_desc axp803_regulators[] = {
 		 AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO1_MASK),
 	AXP_DESC_RANGES(AXP803, DLDO2, "dldo2", "dldoin",
 			axp803_dldo2_ranges, AXP803_DLDO2_NUM_VOLTAGES,
-			AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT,
+			AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT_MASK,
 			AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO2_MASK),
 	AXP_DESC(AXP803, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
 		 AXP22X_DLDO3_V_OUT, AXP22X_DLDO3_V_OUT_MASK,
@@ -744,7 +745,7 @@ static const struct regulator_desc axp803_regulators[] = {
 		 AXP22X_ELDO2_V_OUT, AXP22X_ELDO2_V_OUT_MASK,
 		 AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO2_MASK),
 	AXP_DESC(AXP803, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
-		 AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT,
+		 AXP22X_ELDO3_V_OUT, AXP22X_ELDO3_V_OUT_MASK,
 		 AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_ELDO3_MASK),
 	AXP_DESC(AXP803, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
 		 AXP803_FLDO1_V_OUT, AXP803_FLDO1_V_OUT_MASK,
@@ -791,7 +792,7 @@ static const struct regulator_desc axp806_regulators[] = {
 			AXP806_DCDCA_V_CTRL, AXP806_DCDCA_V_CTRL_MASK,
 			AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_DCDCA_MASK),
 	AXP_DESC(AXP806, DCDCB, "dcdcb", "vinb", 1000, 2550, 50,
-		 AXP806_DCDCB_V_CTRL, AXP806_DCDCB_V_CTRL,
+		 AXP806_DCDCB_V_CTRL, AXP806_DCDCB_V_CTRL_MASK,
 		 AXP806_PWR_OUT_CTRL1, AXP806_PWR_OUT_DCDCB_MASK),
 	AXP_DESC_RANGES(AXP806, DCDCC, "dcdcc", "vinc",