Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (100 commits)
  ide: move hwif_register() call out of ide_probe_port()
  ide: factor out code for tuning devices from ide_probe_port()
  ide: move handling of I/O resources out of ide_probe_port()
  ide: make probe_hwif() return an error value
  ide: use ide_remove_port_from_hwgroup in init_irq()
  ide: prepare init_irq() for using ide_remove_port_from_hwgroup()
  ide: factor out code removing port from hwgroup from ide_unregister()
  ide: I/O resources are released too early in ide_unregister()
  ide: cleanup ide_system_bus_speed()
  ide: remove needless zeroing of hwgroup fields from init_irq()
  ide: remove unused ide_hwgroup_t fields
  ide_platform: remove struct hwif_prop
  ide: remove hwif->present manipulations from hwif_init()
  ide: move wait_hwif_ready() documentation in the right place
  ide: fix handling of busy I/O resources in probe_hwif()
  <linux/hdsmart.h> is not used by kernel code
  ide: don't include <linux/hdsmart.h>
  ide-floppy: cleanup header
  ide: update/add my Copyrights
  ide: delete filenames/versions from comments
  ...

80 files changed, 2182 insertions, 3567 deletions

diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index af0561053167..47e5b40510cb 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2787,12 +2787,6 @@ int cdrom_ioctl(struct file * file, struct cdrom_device_info *cdi,
 	return -ENOSYS;
 }
 
-static inline
-int msf_to_lba(char m, char s, char f)
-{
-	return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
-}
-
 /*
  * Required when we need to use READ_10 to issue other than 2048 block
  * reads
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 64df55e20ab5..e42a465f5717 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -206,6 +206,15 @@ config BLK_DEV_IDECD
 	  To compile this driver as a module, choose M here: the
 	  module will be called ide-cd.
 
+config BLK_DEV_IDECD_VERBOSE_ERRORS
+	bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED
+	depends on BLK_DEV_IDECD
+	default y
+	help
+	  Turn this on to have the driver print out the meanings of the
+	  ATAPI error codes.  This will use up additional 8kB of kernel-space
+	  memory, though.
+
 config BLK_DEV_IDETAPE
 	tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
@@ -617,8 +626,8 @@ config BLK_DEV_SC1200
 	tristate "National SCx200 chipset support"
 	select BLK_DEV_IDEDMA_PCI
 	help
-	  This driver adds support for the built in IDE on the National
-	  SCx200 series of embedded x86 "Geode" systems
+	  This driver adds support for the on-board IDE controller on the
+	  National SCx200 series of embedded x86 "Geode" systems.
 
 config BLK_DEV_PIIX
 	tristate "Intel PIIXn chipsets support"
@@ -793,22 +802,22 @@ config BLK_DEV_CELLEB
 	depends on PPC_CELLEB
 	select BLK_DEV_IDEDMA_PCI
 	help
-	  This driver provides support for the built-in IDE controller on
+	  This driver provides support for the on-board IDE controller on
 	  Toshiba Cell Reference Board.
 	  If unsure, say Y.
 
 endif
 
 config BLK_DEV_IDE_PMAC
-	tristate "Builtin PowerMac IDE support"
+	tristate "PowerMac on-board IDE support"
 	depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y
 	help
-	  This driver provides support for the built-in IDE controller on
+	  This driver provides support for the on-board IDE controller on
 	  most of the recent Apple Power Macintoshes and PowerBooks.
 	  If unsure, say Y.
 
 config BLK_DEV_IDE_PMAC_ATA100FIRST
-	bool "Probe internal ATA/100 (Kauai) first"
+	bool "Probe on-board ATA/100 (Kauai) first"
 	depends on BLK_DEV_IDE_PMAC
 	help
 	  This option will cause the ATA/100 controller found in UniNorth2
@@ -823,7 +832,7 @@ config BLK_DEV_IDEDMA_PMAC
 	depends on BLK_DEV_IDE_PMAC
 	select BLK_DEV_IDEDMA_PCI
 	help
-	  This option allows the driver for the built-in IDE controller on
+	  This option allows the driver for the on-board IDE controller on
 	  Power Macintoshes and PowerBooks to use DMA (direct memory access)
 	  to transfer data to and from memory.  Saying Y is safe and improves
 	  performance.
@@ -934,7 +943,7 @@ config BLK_DEV_GAYLE
 	help
 	  This is the IDE driver for the Amiga Gayle IDE interface. It supports
 	  both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
-	  This includes builtin IDE interfaces on some Amiga models (A600,
+	  This includes on-board IDE interfaces on some Amiga models (A600,
 	  A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
 	  bus (M-Tech E-Matrix 530 expansion card).
 	  Say Y if you have an Amiga with a Gayle IDE interface and want to use
@@ -948,10 +957,10 @@ config BLK_DEV_IDEDOUBLER
 	depends on BLK_DEV_GAYLE && EXPERIMENTAL
 	---help---
 	  This driver provides support for the so-called `IDE doublers' (made
-	  by various manufacturers, e.g. Eyetech) that can be connected to the
-	  builtin IDE interface of some Amiga models. Using such an IDE
-	  doubler, you can connect up to four instead of two IDE devices on
-	  the Amiga's builtin IDE interface.
+	  by various manufacturers, e.g. Eyetech) that can be connected to
+	  the on-board IDE interface of some Amiga models. Using such an IDE
+	  doubler, you can connect up to four instead of two IDE devices to
+	  the Amiga's on-board IDE interface.
 
 	  Note that the normal Amiga Gayle IDE driver may not work correctly
 	  if you have an IDE doubler and don't enable this driver!
@@ -963,9 +972,9 @@ config BLK_DEV_BUDDHA
 	tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
 	depends on ZORRO && EXPERIMENTAL
 	help
-	  This is the IDE driver for the IDE interfaces on the Buddha, 
-	  Catweasel and X-Surf expansion boards.  It supports up to two interfaces 
-	  on the Buddha, three on the Catweasel and two on the X-Surf.
+	  This is the IDE driver for the IDE interfaces on the Buddha, Catweasel
+	  and X-Surf expansion boards.  It supports up to two interfaces on the
+	  Buddha, three on the Catweasel and two on the X-Surf.
 
 	  Say Y if you have a Buddha or Catweasel expansion board and want to
 	  use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
@@ -975,23 +984,23 @@ config BLK_DEV_FALCON_IDE
 	tristate "Falcon IDE interface support"
 	depends on ATARI
 	help
-	  This is the IDE driver for the builtin IDE interface on the Atari
+	  This is the IDE driver for the on-board IDE interface on the Atari
 	  Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
-	  disks, CD-ROM drives, etc.) that are connected to the builtin IDE
+	  disks, CD-ROM drives, etc.) that are connected to the on-board IDE
 	  interface.
 
 config BLK_DEV_MAC_IDE
 	tristate "Macintosh Quadra/Powerbook IDE interface support"
 	depends on MAC
 	help
-	  This is the IDE driver for the builtin IDE interface on some m68k
+	  This is the IDE driver for the on-board IDE interface on some m68k
 	  Macintosh models. It supports both the `Quadra style' (used in
 	  Quadra/ Centris 630 and Performa 588 models) and `Powerbook style'
 	  (used in the Powerbook 150 and 190 models) IDE interface.
 
 	  Say Y if you have such an Macintosh model and want to use IDE
 	  devices (hard disks, CD-ROM drives, etc.) that are connected to the
-	  builtin IDE interface.
+	  on-board IDE interface.
 
 config BLK_DEV_Q40IDE
 	tristate "Q40/Q60 IDE interface support"
@@ -1062,8 +1071,8 @@ config BLK_DEV_ALI14XX
 	  boot parameter.  It enables support for the secondary IDE interface
 	  of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
 	  I/O speeds to be set as well.  See the files
-	  <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c> for
-	  more info.
+	  <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c>
+	  for more info.
 
 config BLK_DEV_DTC2278
 	tristate "DTC-2278 support"
@@ -1088,8 +1097,8 @@ config BLK_DEV_QD65XX
 	help
 	  This driver is enabled at runtime using the "qd65xx.probe" kernel
 	  boot parameter.  It permits faster I/O speeds to be set.  See the
-	  <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> for
-	  more info.
+	  <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
+	  for more info.
 
 config BLK_DEV_UMC8672
 	tristate "UMC-8672 support"
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 0d2da89d15cf..a4a4323be911 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -40,8 +40,10 @@ obj-$(CONFIG_BLK_DEV_IDEPNP)		+= ide-pnp.o
 obj-$(CONFIG_IDE_H8300)			+= h8300/
 obj-$(CONFIG_IDE_GENERIC)		+= ide-generic.o
 
+ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
+
 obj-$(CONFIG_BLK_DEV_IDEDISK)		+= ide-disk.o
-obj-$(CONFIG_BLK_DEV_IDECD)		+= ide-cd.o
+obj-$(CONFIG_BLK_DEV_IDECD)		+= ide-cd_mod.o
 obj-$(CONFIG_BLK_DEV_IDETAPE)		+= ide-tape.o
 obj-$(CONFIG_BLK_DEV_IDEFLOPPY)		+= ide-floppy.o
 
diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c
index 45bf9c825f2b..037300fa284c 100644
--- a/drivers/ide/arm/bast-ide.c
+++ b/drivers/ide/arm/bast-ide.c
@@ -1,5 +1,4 @@
-/* linux/drivers/ide/arm/bast-ide.c
- *
+/*
  * Copyright (c) 2003-2004 Simtec Electronics
  *  Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 8a5c7205b77c..8d2cc47a362e 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -1,6 +1,4 @@
 /*
- * linux/drivers/ide/arm/icside.c
- *
  * Copyright (c) 1996-2004 Russell King.
  *
  * Please note that this platform does not support 32-bit IDE IO.
@@ -71,8 +69,6 @@ struct icside_state {
 	void __iomem *irq_port;
 	void __iomem *ioc_base;
 	unsigned int type;
-	/* parent device... until the IDE core gets one of its own */
-	struct device *dev;
 	ide_hwif_t *hwif[2];
 };
 
@@ -206,23 +202,6 @@ static void icside_maskproc(ide_drive_t *drive, int mask)
  * interfaces use the same IRQ, which should guarantee this.
  */
 
-static void icside_build_sglist(ide_drive_t *drive, struct request *rq)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct icside_state *state = hwif->hwif_data;
-	struct scatterlist *sg = hwif->sg_table;
-
-	ide_map_sg(drive, rq);
-
-	if (rq_data_dir(rq) == READ)
-		hwif->sg_dma_direction = DMA_FROM_DEVICE;
-	else
-		hwif->sg_dma_direction = DMA_TO_DEVICE;
-
-	hwif->sg_nents = dma_map_sg(state->dev, sg, hwif->sg_nents,
-				    hwif->sg_dma_direction);
-}
-
 /*
  * Configure the IOMD to give the appropriate timings for the transfer
  * mode being requested.  We take the advice of the ATA standards, and
@@ -294,33 +273,32 @@ static void icside_dma_host_set(ide_drive_t *drive, int on)
 static int icside_dma_end(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = HWIF(drive);
-	struct icside_state *state = hwif->hwif_data;
+	struct expansion_card *ec = ECARD_DEV(hwif->dev);
 
 	drive->waiting_for_dma = 0;
 
-	disable_dma(ECARD_DEV(state->dev)->dma);
+	disable_dma(ec->dma);
 
 	/* Teardown mappings after DMA has completed. */
-	dma_unmap_sg(state->dev, hwif->sg_table, hwif->sg_nents,
-		     hwif->sg_dma_direction);
+	ide_destroy_dmatable(drive);
 
-	return get_dma_residue(ECARD_DEV(state->dev)->dma) != 0;
+	return get_dma_residue(ec->dma) != 0;
 }
 
 static void icside_dma_start(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = HWIF(drive);
-	struct icside_state *state = hwif->hwif_data;
+	struct expansion_card *ec = ECARD_DEV(hwif->dev);
 
 	/* We can not enable DMA on both channels simultaneously. */
-	BUG_ON(dma_channel_active(ECARD_DEV(state->dev)->dma));
-	enable_dma(ECARD_DEV(state->dev)->dma);
+	BUG_ON(dma_channel_active(ec->dma));
+	enable_dma(ec->dma);
 }
 
 static int icside_dma_setup(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = HWIF(drive);
-	struct icside_state *state = hwif->hwif_data;
+	struct expansion_card *ec = ECARD_DEV(hwif->dev);
 	struct request *rq = hwif->hwgroup->rq;
 	unsigned int dma_mode;
 
@@ -332,9 +310,9 @@ static int icside_dma_setup(ide_drive_t *drive)
 	/*
 	 * We can not enable DMA on both channels.
 	 */
-	BUG_ON(dma_channel_active(ECARD_DEV(state->dev)->dma));
+	BUG_ON(dma_channel_active(ec->dma));
 
-	icside_build_sglist(drive, rq);
+	hwif->sg_nents = ide_build_sglist(drive, rq);
 
 	/*
 	 * Ensure that we have the right interrupt routed.
@@ -349,14 +327,14 @@ static int icside_dma_setup(ide_drive_t *drive)
 	/*
 	 * Select the correct timing for this drive.
 	 */
-	set_dma_speed(ECARD_DEV(state->dev)->dma, drive->drive_data);
+	set_dma_speed(ec->dma, drive->drive_data);
 
 	/*
 	 * Tell the DMA engine about the SG table and
 	 * data direction.
 	 */
-	set_dma_sg(ECARD_DEV(state->dev)->dma, hwif->sg_table, hwif->sg_nents);
-	set_dma_mode(ECARD_DEV(state->dev)->dma, dma_mode);
+	set_dma_sg(ec->dma, hwif->sg_table, hwif->sg_nents);
+	set_dma_mode(ec->dma, dma_mode);
 
 	drive->waiting_for_dma = 1;
 
@@ -444,6 +422,7 @@ icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *e
 		hwif->noprobe = 0;
 		hwif->chipset = ide_acorn;
 		hwif->gendev.parent = &ec->dev;
+		hwif->dev = &ec->dev;
 	}
 
 	return hwif;
@@ -591,7 +570,6 @@ icside_probe(struct expansion_card *ec, const struct ecard_id *id)
 	}
 
 	state->type	= ICS_TYPE_NOTYPE;
-	state->dev	= &ec->dev;
 
 	idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
 	if (idmem) {
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index e6b56d1d48f4..c8b6581e624e 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -1,6 +1,4 @@
 /*
- * linux/drivers/ide/arm/rapide.c
- *
  * Copyright (c) 1996-2002 Russell King.
  */
 
@@ -78,8 +76,8 @@ static void __devexit rapide_remove(struct expansion_card *ec)
 
 	ecard_set_drvdata(ec, NULL);
 
-	/* there must be a better way */
-	ide_unregister(hwif - ide_hwifs);
+	ide_unregister(hwif->index);
+
 	ecard_release_resources(ec);
 }
 
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 8c3294c4d23e..0640a38ff127 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -1,5 +1,4 @@
-/* $Id: cris-ide-driver.patch,v 1.1 2005/06/29 21:39:07 akpm Exp $
- *
+/*
  * Etrax specific IDE functions, like init and PIO-mode setting etc.
  * Almost the entire ide.c is used for the rest of the Etrax ATA driver.
  * Copyright (c) 2000-2005 Axis Communications AB
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 4f6d0191cf6c..02432958dfe1 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -1,5 +1,4 @@
 /*
- * drivers/ide/h8300/ide-h8300.c
  * H8/300 generic IDE interface
  */
 
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index e888fc35b27c..68bc61844780 100644
--- a/