Merge tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/staging driver updates from Greg KH:
 "Here is the big tty/serial driver update for 4.16-rc1.

  The usual number of various serial driver fixes and updates to try to
  get them to work with crazy hardware configurations (seriously, how
  many different ways are hardware engineers going to come up with to
  hook up a simple UART?)

  There is also some serdev bugfixes and updates, as well as a
  smattering of other small fixes in here.

  All have been in the linux-next tree for a while, with no reported
  issues"

* tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
  tty: serial: exar: Relocate sleep wake-up handling
  tty: fix data race between tty_init_dev and flush of buf
  serial: imx: fix endless loop during suspend
  serial: core: mark port as initialized after successful IRQ change
  serdev: only match serdev devices
  serdev: do not generate modaliases for controllers
  serial: mxs-auart: don't use GPIOF_* with gpiod_get_direction
  serial: 8250_dw: Revert "Improve clock rate setting"
  MAINTAINERS: Add myself as designated reviewer for 8250_dw
  gpio: serial: max310x: Support open-drain configuration for GPIOs
  serdev: Fix serdev_uevent failure on ACPI enumerated serdev-controllers
  serial: 8250_ingenic: Parse earlycon options
  serial: 8250_ingenic: Add support for the JZ4770 SoC
  serial: core: Make uart_parse_options take const char* argument
  serial: 8250_of: fix return code when probe function fails to get reset
  serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS
  serial: 8250_uniphier: fix error return code in uniphier_uart_probe()
  tty: n_gsm: Allow ADM response in addition to UA for control dlci
  tty: omap-serial: Fix initial on-boot RTS GPIO level
  tty: serial: jsm: Add one check against NULL pointer dereference
  ...

32 files changed, 460 insertions, 330 deletions

diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index cc2b4d9433ed..b811442c5ce6 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -394,10 +394,14 @@ config GOLDFISH_TTY
 	depends on GOLDFISH
 	select SERIAL_CORE
 	select SERIAL_CORE_CONSOLE
-	select SERIAL_EARLYCON
 	help
 	  Console and system TTY driver for the Goldfish virtual platform.
 
+config GOLDFISH_TTY_EARLY_CONSOLE
+	bool
+	default y if GOLDFISH_TTY=y
+	select SERIAL_EARLYCON
+
 config DA_TTY
 	bool "DA TTY"
 	depends on METAG_DA
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index 7f657bb5113c..1c1bd0afcd48 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -433,6 +433,7 @@ static int goldfish_tty_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_GOLDFISH_TTY_EARLY_CONSOLE
 static void gf_early_console_putchar(struct uart_port *port, int ch)
 {
 	__raw_writel(ch, port->membase);
@@ -456,6 +457,7 @@ static int __init gf_earlycon_setup(struct earlycon_device *device,
 }
 
 OF_EARLYCON_DECLARE(early_gf_tty, "google,goldfish-tty", gf_earlycon_setup);
+#endif
 
 static const struct of_device_id goldfish_tty_of_match[] = {
 	{ .compatible = "google,goldfish-tty", },
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index 015686ff4825..bdd3027ef01b 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -219,13 +219,9 @@ static struct isi_port  isi_ports[PORT_COUNT];
 static int WaitTillCardIsFree(unsigned long base)
 {
 	unsigned int count = 0;
-	unsigned int a = in_atomic(); /* do we run under spinlock? */
 
 	while (!(inw(base + 0xe) & 0x1) && count++ < 100)
-		if (a)
-			mdelay(1);
-		else
-			msleep(1);
+		mdelay(1);
 
 	return !(inw(base + 0xe) & 0x1);
 }
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 68cbc03aab4b..250a19f042d7 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -1487,8 +1487,6 @@ static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_term
 	if (ts->c_iflag & IXANY)
 		xany = 1;
 
-	/* Clear the features we don't support */
-	ts->c_cflag &= ~CMSPAR;
 	MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
 	baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
 	if (baud == -1)
@@ -1781,10 +1779,17 @@ static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
 		mode |= MX_STOP1;
 
 	if (termio->c_cflag & PARENB) {
-		if (termio->c_cflag & PARODD)
-			mode |= MX_PARODD;
-		else
-			mode |= MX_PAREVEN;
+		if (termio->c_cflag & PARODD) {
+			if (termio->c_cflag & CMSPAR)
+				mode |= MX_PARMARK;
+			else
+				mode |= MX_PARODD;
+		} else {
+			if (termio->c_cflag & CMSPAR)
+				mode |= MX_PARSPACE;
+			else
+				mode |= MX_PAREVEN;
+		}
 	} else
 		mode |= MX_PARNONE;
 
diff --git a/drivers/tty/moxa.h b/drivers/tty/moxa.h
index 8ce89fd36c7b..563d2dce80b3 100644
--- a/drivers/tty/moxa.h
+++ b/drivers/tty/moxa.h
@@ -301,5 +301,7 @@
 #define	MX_PARNONE	0x00
 #define	MX_PAREVEN	0x40
 #define	MX_PARODD	0xC0
+#define	MX_PARMARK	0xA0
+#define	MX_PARSPACE	0x20
 
 #endif
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 0edf4fcfea23..3b3af7e0ce1c 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1451,6 +1451,10 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
  *	in which case an opening port goes back to closed and a closing port
  *	is simply put into closed state (any further frames from the other
  *	end will get a DM response)
+ *
+ *	Some control dlci can stay in ADM mode with other dlci working just
+ *	fine. In that case we can just keep the control dlci open after the
+ *	DLCI_OPENING retries time out.
  */
 
 static void gsm_dlci_t1(struct timer_list *t)
@@ -1464,8 +1468,15 @@ static void gsm_dlci_t1(struct timer_list *t)
 		if (dlci->retries) {
 			gsm_command(dlci->gsm, dlci->addr, SABM|PF);
 			mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
-		} else
+		} else if (!dlci->addr && gsm->control == (DM | PF)) {
+			if (debug & 8)
+				pr_info("DLCI %d opening in ADM mode.\n",
+					dlci->addr);
+			gsm_dlci_open(dlci);
+		} else {
 			gsm_dlci_close(dlci);
+		}
+
 		break;
 	case DLCI_CLOSING:
 		dlci->retries--;
@@ -1483,8 +1494,8 @@ static void gsm_dlci_t1(struct timer_list *t)
  *	@dlci: DLCI to open
  *
  *	Commence opening a DLCI from the Linux side. We issue SABM messages
- *	to the modem which should then reply with a UA, at which point we
- *	will move into open state. Opening is done asynchronously with retry
+ *	to the modem which should then reply with a UA or ADM, at which point
+ *	we will move into open state. Opening is done asynchronously with retry
  *	running off timers and the responses.
  */
 
@@ -2955,7 +2966,6 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
 static void gsmtty_close(struct tty_struct *tty, struct file *filp)
 {
 	struct gsm_dlci *dlci = tty->driver_data;
-	struct gsm_mux *gsm;
 
 	if (dlci == NULL)
 		return;
@@ -2964,7 +2974,6 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp)
 	mutex_lock(&dlci->mutex);
 	gsm_destroy_network(dlci);
 	mutex_unlock(&dlci->mutex);
-	gsm = dlci->gsm;
 	if (tty_port_close_start(&dlci->port, tty, filp) == 0)
 		return;
 	gsm_dlci_begin_close(dlci);
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 5a135ed46159..f439c72b9e3c 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -19,6 +19,38 @@
 static bool is_registered;
 static DEFINE_IDA(ctrl_ida);
 
+static ssize_t modalias_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	int len;
+
+	len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
+	if (len != -ENODEV)
+		return len;
+
+	return of_device_modalias(dev, buf, PAGE_SIZE);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *serdev_device_attrs[] = {
+	&dev_attr_modalias.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(serdev_device);
+
+static int serdev_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	int rc;
+
+	/* TODO: platform modalias */
+
+	rc = acpi_device_uevent_modalias(dev, env);
+	if (rc != -ENODEV)
+		return rc;
+
+	return of_device_uevent_modalias(dev, env);
+}
+
 static void serdev_device_release(struct device *dev)
 {
 	struct serdev_device *serdev = to_serdev_device(dev);
@@ -26,9 +58,16 @@ static void serdev_device_release(struct device *dev)
 }
 
 static const struct device_type serdev_device_type = {
+	.groups		= serdev_device_groups,
+	.uevent		= serdev_device_uevent,
 	.release	= serdev_device_release,
 };
 
+static bool is_serdev_device(const struct device *dev)
+{
+	return dev->type == &serdev_device_type;
+}
+
 static void serdev_ctrl_release(struct device *dev)
 {
 	struct serdev_controller *ctrl = to_serdev_controller(dev);
@@ -42,6 +81,9 @@ static const struct device_type serdev_ctrl_type = {
 
 static int serdev_device_match(struct device *dev, struct device_driver *drv)
 {
+	if (!is_serdev_device(dev))
+		return 0;
+
 	/* TODO: platform matching */
 	if (acpi_driver_match_device(dev, drv))
 		return 1;
@@ -49,18 +91,6 @@ static int serdev_device_match(struct device *dev, struct device_driver *drv)
 	return of_driver_match_device(dev, drv);
 }
 
-static int serdev_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	int rc;
-
-	/* TODO: platform modalias */
-	rc = acpi_device_uevent_modalias(dev, env);
-	if (rc != -ENODEV)
-		return rc;
-
-	return of_device_uevent_modalias(dev, env);
-}
-
 /**
  * serdev_device_add() - add a device previously constructed via serdev_device_alloc()
  * @serdev:	serdev_device to be added
@@ -312,32 +342,11 @@ static int serdev_drv_remove(struct device *dev)
 	return 0;
 }
 
-static ssize_t modalias_show(struct device *dev,
-			     struct device_attribute *attr, char *buf)
-{
-	int len;
-
-	len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
-	if (len != -ENODEV)
-		return len;
-
-	return of_device_modalias(dev, buf, PAGE_SIZE);
-}
-DEVICE_ATTR_RO(modalias);
-
-static struct attribute *serdev_device_attrs[] = {
-	&dev_attr_modalias.attr,
-	NULL,
-};
-ATTRIBUTE_GROUPS(serdev_device);
-
 static struct bus_type serdev_bus_type = {
 	.name		= "serial",
 	.match		= serdev_device_match,
 	.probe		= serdev_drv_probe,
 	.remove		= serdev_drv_remove,
-	.uevent		= serdev_uevent,
-	.dev_groups	= serdev_device_groups,
 };
 
 /**
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index 1bdf2959ac5c..fa1672993b4c 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -59,7 +59,8 @@ static void ttyport_write_wakeup(struct tty_port *port)
 	    test_bit(SERPORT_ACTIVE, &serport->flags))
 		serdev_controller_write_wakeup(ctrl);
 
-	wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
+	/* Wake up any tty_wait_until_sent() */
+	wake_up_interruptible(&tty->write_wait);
 
 	tty_kref_put(tty);
 }
@@ -122,6 +123,8 @@ static int ttyport_open(struct serdev_controller *ctrl)
 	if (ret)
 		goto err_close;
 
+	tty_unlock(serport->tty);
+
 	/* Bring the UART into a known 8 bits no parity hw fc state */
 	ktermios = tty->termios;
 	ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP |
@@ -131,11 +134,12 @@ static int ttyport_open(struct serdev_controller *ctrl)
 	ktermios.c_cflag &= ~(CSIZE | PARENB);
 	ktermios.c_cflag |= CS8;
 	ktermios.c_cflag |= CRTSCTS;
+	/* Hangups are not supported so make sure to ignore carrier detect. */
+	ktermios.c_cflag |= CLOCAL;
 	tty_set_termios(tty, &ktermios);
 
 	set_bit(SERPORT_ACTIVE, &serport->flags);
 
-	tty_unlock(serport->tty);
 	return 0;
 
 err_close:
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 5bb0c42c88dd..cd1b94a0f451 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -252,31 +252,25 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
 			       struct ktermios *old)
 {
 	unsigned int baud = tty_termios_baud_rate(termios);
-	unsigned int target_rate, min_rate, max_rate;
 	struct dw8250_data *d = p->private_data;
 	long rate;
-	int i, ret;
+	int ret;
 
 	if (IS_ERR(d->clk) || !old)
 		goto out;
 
-	/* Find a clk rate within +/-1.6% of an integer multiple of baudx16 */
-	target_rate = baud * 16;
-	min_rate = target_rate - (target_rate >> 6);
-	max_rate = target_rate + (target_rate >> 6);
-
-	for (i = 1; i <= UART_DIV_MAX; i++) {
-		rate = clk_round_rate(d->clk, i * target_rate);
-		if (rate >= i * min_rate && rate <= i * max_rate)
-			break;
-	}
-	if (i <= UART_DIV_MAX) {
-		clk_disable_unprepare(d->clk);
+	clk_disable_unprepare(d->clk);
+	rate = clk_round_rate(d->clk, baud * 16);
+	if (rate < 0)
+		ret = rate;
+	else if (rate == 0)
+		ret = -ENOENT;
+	else
 		ret = clk_set_rate(d->clk, rate);
-		clk_prepare_enable(d->clk);
-		if (!ret)
-			p->uartclk = rate;
-	}
+	clk_prepare_enable(d->clk);
+
+	if (!ret)
+		p->uartclk = rate;
 
 out:
 	p->status &= ~UPSTAT_AUTOCTS;
@@ -515,7 +509,8 @@ static int dw8250_probe(struct platform_device *pdev)
 	/* If no clock rate is defined, fail. */
 	if (!p->uartclk) {
 		dev_err(dev, "clock rate not defined\n");
-		return -EINVAL;
+		err = -EINVAL;
+		goto err_clk;
 	}
 
 	data->pclk = devm_clk_get(dev, "apb_pclk");
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index a402878c9f30..38af306ca0e8 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -34,6 +34,7 @@
 #define PCI_DEVICE_ID_EXAR_XR17V4358		0x4358
 #define PCI_DEVICE_ID_EXAR_XR17V8358		0x8358
 
+#define UART_EXAR_INT0		0x80
 #define UART_EXAR_8XMODE	0x88	/* 8X sampling rate select */
 
 #define UART_EXAR_FCTR		0x08	/* Feature Control Register */
@@ -121,6 +122,7 @@ struct exar8250_board {
 struct exar8250 {
 	unsigned int		nr;
 	struct exar8250_board	*board;
+	void __iomem		*virt;
 	int			line[0];
 };
 
@@ -131,12 +133,9 @@ static int default_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 	const struct exar8250_board *board = priv->board;
 	unsigned int bar = 0;
 
-	if (!pcim_iomap_table(pcidev)[bar] && !pcim_iomap(pcidev, bar, 0))
-		return -ENOMEM;
-
 	port->port.iotype = UPIO_MEM;
 	port->port.mapbase = pci_resource_start(pcidev, bar) + offset;
-	port->port.membase = pcim_iomap_table(pcidev)[bar] + offset;
+	port->port.membase = priv->virt + offset;
 	port->port.regshift = board->reg_shift;
 
 	return 0;
@@ -420,6 +419,25 @@ static void pci_xr17v35x_exit(struct pci_dev *pcidev)
 	port->port.private_data = NULL;
 }
 
+/*
+ * These Exar UARTs have an extra interrupt indicator that could fire for a
+ * few interrupts that are not presented/cleared through IIR.  One of which is
+ * a wakeup interrupt when coming out of sleep.  These interrupts are only
+ * cleared by reading global INT0 or INT1 registers as interrupts are
+ * associated with channel 0. The INT[3:0] registers _are_ accessible from each
+ * channel's address space, but for the sake of bus efficiency we register a
+ * dedicated handler at the PCI device level to handle them.
+ */
+static irqreturn_t exar_misc_handler(int irq, void *data)
+{
+	struct exar8250 *priv = data;
+
+	/* Clear all PCI interrupts by reading INT0. No effect on IIR */
+	ioread8(priv->virt + UART_EXAR_INT0);
+
+	return IRQ_HANDLED;
+}
+
 static int
 exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 {
@@ -448,6 +466,9 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 		return -ENOMEM;
 
 	priv->board = board;
+	priv->virt = pcim_iomap(pcidev, bar, 0);
+	if (!priv->virt)
+		return -ENOMEM;
 
 	pci_set_master(pcidev);
 
@@ -461,6 +482,11 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 	uart.port.irq = pci_irq_vector(pcidev, 0);
 	uart.port.dev = &pcidev->dev;
 
+	rc = devm_request_irq(&pcidev->dev, uart.port.irq, exar_misc_handler,
+			 IRQF_SHARED, "exar_uart", priv);
+	if (rc)
+		return rc;
+
 	for (i = 0; i < nr_ports && i < maxnr; i++) {
 		rc = board->setup(priv, pcidev, &uart, i);
 		if (rc) {
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 6af84900870e..15a8c8dfa92b 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -91,14 +91,22 @@ static int __init ingenic_early_console_setup(struct earlycon_device *dev,
 					      const char *opt)
 {
 	struct uart_port *port = &dev->port;
-	unsigned int baud, divisor;
+	unsigned int divisor;
+	int baud = 115200;
 
 	if (!dev->port.membase)
 		return -ENODEV;
 
+	if (opt) {
+		unsigned int parity, bits, flow; /* unused for now */
+
+		uart_parse_options(opt, &baud, &parity, &bits, &flow);
+	}
+
 	ingenic_early_console_setup_clock(dev);
 
-	baud = dev->baud ?: 115200;
+	if (dev->baud)
+		baud = dev->baud;
 	divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud);
 
 	early_out(port, UART_IER, 0);
@@ -125,6 +133,10 @@ EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup);
 OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart",
 		    ingenic_early_console_setup);
 
+EARLYCON_DECLARE(jz4770_uart, ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(jz4770_uart, "ingenic,jz4770-uart",
+		    ingenic_early_console_setup);
+
 EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup);
 OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart",
 		    ingenic_early_console_setup);
@@ -319,6 +331,7 @@ static const struct ingenic_uart_config jz4780_uart_config = {
 static const struct of_device_id of_match[] = {
 	{ .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config },
 	{ .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config },
+	{ .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config },
 	{ .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config },
 	{ .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config },
 	{ /* sentinel */ }
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 1e67a7e4a5fd..160b8906d9b9 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -136,8 +136,11 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 	}
 
 	info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
-	if (IS_ERR(info->rst))
+	if (IS_ERR(info->rst)) {
+		ret = PTR_ERR(info->rst);
 		goto err_dispose;
+	}
+
 	ret = reset_control_deassert(info->rst);
 	if (ret)
 		goto err_dispose;
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index bd40ba402410..57f6eba47f44 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -414,7 +414,7 @@ static void omap_8250_set_termios(struct uart_port *port,
 	/* Up to here it was mostly serial8250_do_set_termios() */
 
 	/*
-	 * We enable TRIG_GRANU for RX and TX and additionaly we set
+	 * We enable TRIG_GRANU for RX and TX and additionally we set
 	 * SCR_TX_EMPTY bit. The result is the following:
 	 * - RX_TRIGGER amount of bytes in the FIFO will cause an interrupt.
 	 * - less than RX_TRIGGER number of bytes will also cause an interrupt
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 11434551ac0a..1328c7e70108 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -441,7 +441,6 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
 }
 
 static int serial8250_default_handle_irq(struct uart_port *port);
-static int exar_handle_irq(struct uart_port *port);
 
 static void set_io_from_upio(struct uart_port *p)
 {
@@ -1884,26 +1883,6 @@ static int serial8250_default_handle_irq(struct uart_port *port)
 }
 
 /*
- * These Exar UARTs have an extra interrupt indicator that could
- * fire for a few unimplemented interrupts.  One of which is a
- * wakeup event when coming out of sleep.  Put this here just
- * to be on the safe side that these interrupts don't go unhandled.
- */
-static int exar_handle_irq(struct uart_port *port)
-{
-	unsigned int iir = serial_port_in(port, UART_IIR);
-	int ret = 0;
-
-	if (((port->type == PORT_XR17V35X) || (port->type == PORT_XR17D15X)) &&
-	    serial_port_in(port, UART_EXAR_INT0) != 0)
-		ret = 1;
-
-	ret |= serial8250_handle_irq(port, iir);
-
-	return ret;
-}
-
-/*
  * Newer 16550 compatible parts such as the SC16C650 & Altera 16550 Soft IP
  * have a programmable TX threshold that triggers the THRE interrupt in
  * the IIR register. In this case, the THRE interrupt indicates the FIFO
@@ -3067,11 +3046,6 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	if (port->type == PORT_UNKNOWN)
 		serial8250_release_std_resource(up);
 
-	/* Fixme: probably not the best place for this */
-	if ((port->type == PORT_XR17V35X) ||
-	   (port->type == PORT_XR17D15X))
-		port->handle_irq = exar_handle_irq;
-
 	register_dev_spec_attr_grp(up);
 	up->fcr = uart_config[up->port.type].fcr;
 }
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 45ef506293ae..28d88ccf5a0c 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -250,12 +250,13 @@ static int uniphier_uart_probe(struct platform_device *pdev)
 	up.dl_read = uniphier_serial_dl_read;
 	up.dl_write = uniphier_serial_dl_write;
 
-	priv->line = serial8250_register_8250_port(&up);
-	if (priv->line < 0) {
+	ret = serial8250_register_8250_port(&up);
+	if (ret < 0) {
 		dev_err(dev, "failed to register 8250 port\n");
 		clk_disable_unprepare(priv->clk);
 		return ret;
 	}
+	priv->line = ret;
 
 	platform_set_drvdata(pdev, priv);
 
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index a5c0ef1e7695..16b1496e6105 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -5,6 +5,7 @@
 
 config SERIAL_8250
 	tristate "8250/16550 and compatible serial support"
+	depends on !S390
 	select SERIAL_CORE
 	---help---
 	  This selects whether you want to include the driver for the standard
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index b788fee54249..3682fd3e960c 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -761,24 +761,30 @@ config SERIAL_SH_SCI
 	select SERIAL_MCTRL_GPIO if GPIOLIB
 
 config SERIAL_SH_SCI_NR_UARTS
-	int "Maximum number of SCI(F) serial ports"
+	int "Maximum number of SCI(F) serial ports" if EXPERT
 	depends on SERIAL_SH_SCI
+	default "3" if H8300
+	default "10" if SUPERH
+	default "18" if ARCH_RENESAS
 	default "2"
 
 config SERIAL_SH_SCI_CONSOLE
-	bool "Support for console on SuperH SCI(F)"
+	bool "Support for console on SuperH SCI(F)" if EXPERT
 	depends on SERIAL_SH_SCI=y
 	select SERIAL_CORE_CONSOLE
+	default y
 
 config SERIAL_SH_SCI_EARLYCON
-	bool "Support for early console on SuperH SCI(F)"
+	bool "Support for early console on SuperH SCI(F)" if EXPERT
 	depends on SERIAL_SH_SCI=y
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_EARLYCON
+	default ARCH_RENESAS || H8300
 
 config SERIAL_SH_SCI_DMA
-	bool "DMA support"
+	bool "DMA support" if EXPERT
 	depends on SERIAL_SH_SCI && DMA_ENGINE
+	default ARCH_RENESAS
 
 config SERIAL_PNX8XXX
 	bool "Enable PNX8XXX SoCs' UART Support"
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 04af8de8617e..4b40a5b449ee 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -314,10 +314,9 @@ static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
 static int pl011_fifo_to_tty(struct uart_amba_port *uap)
 {
 	u16 status;
-	unsigned int ch, flag, max_count = 256;
-	int fifotaken = 0;
+	unsigned int ch, flag, fifotaken;
 
-	while (max_count--) {
+	for (fifotaken = 0; fifotaken != 256; fifotaken++) {
 		status = pl011_read(uap, REG_FR);
 		if (status & UART01x_FR_RXFE)
 			break;
@@ -326,7 +325,6 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
 		ch = pl011_read(uap, REG_DR) | UART_DUMMY_DR_RX;
 		flag = TTY_NORMAL;
 		uap->port.icount.rx++;
-		fifotaken++;
 
 		if (unlikely(ch & UART_DR_ERROR)) {
 			if (ch & UART011_DR_BE) {
@@ -1482,12 +1480,10 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 	struct uart_amba_port *uap = dev_id;
 	unsigned long flags;
 	unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
-	u16 imsc;
 	int handled = 0;
 
 	spin_lock_irqsave(&uap->port.lock, flags);
-	imsc = pl011_read(uap, REG_IMSC);
-	status = pl011_read(uap, REG_RIS) & imsc;
+	status = pl011_read(uap, REG_RIS) & uap->im;
 	if (status) {
 		do {
 			check_apply_cts_event_workaround(uap);
@@ -1511,7 +1507,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 			if (pass_counter-- == 0)
 				break;
 
-			status = pl011_read(uap, REG_RIS) & imsc;
+			status = pl011_read(uap, REG_RIS) & uap->im;
 		} while (status != 0);
 		handled = 1;
 	}
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index efa25611ca0c..df46a9e88c34 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2345,7 +2345,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
 	atmel_init_property(atmel_port, pdev);