Merge tag 'mtd/for-4.19' of git://git.infradead.org/linux-mtd

Pull mtd updates from Boris Brezillon:
 "JFFS2 changes:
   - Support 64-bit timestamps

  MTD core changes:
   - Support sub-partitions
   - Clarify mtd_oob_ops documentation
   - Make Kconfig formatting consistent
   - Fix potential overflows in mtdchar_{write,read}()
   - Fallback to ->_{read,write}() when ->_{read,write}_oob() is missing
     and no OOB data were requested
   - Remove VLA usage in the bch lib

  MTD driver changes:
   - Use mtd_device_register() instead of mtd_device_parse_register()
     where applicable
   - Use proper printk format to print physical addresses in the
     solutionengine driver
   - Add missing mtd_set_of_node() call in the powernv driver
   - Remove unneeded variables in a few drivers
   - Plug the TRX part parser to the DT partition parsers logic
   - Check ioremap_cache() return code in the gpio-addr-flash driver
   - Stop using VMLINUX_SYMBOL_STR() in gen_probe.c

  SPI NOR core changes:
   - Apply reset hacks only when reset is explicitly marked as broken in
     the DT

   SPI NOR driver changes:
   - Minor cleanup/fixes in the m25p80 driver
   - Release flash_np in the nxp-spifi driver
   - Add suspend/resume hooks to the atmel-quadspi driver
   - Include gpio/consumer.h instead of gpio.h in the atmel-quadspi
     driver
   - Use %pK instead of %p in the stm32-quadspi driver
   - Improve timeout handling in the cadence-quadspi driver
   - Use mtd_device_register() instead of mtd_device_parse_register() in
     the intel-spi driver

  NAND core changes:
   - Add the SPI-NAND framework.
   - Create a helper to find the best ECC configuration.
   - Create NAND controller operations.
   - Allocate dynamically ONFI parameters structure.
   - Add defines for ONFI version bits.
   - Add manufacturer fixup for ONFI parameter page.
   - Add an option to specify NAND chip as a boot device.
   - Add Reed-Solomon error correction algorithm.
   - Better name for the controller structure.
   - Remove unused caller_is_module() definition.
   - Make subop helpers return unsigned values.
   - Expose _notsupp() helpers for raw page accessors.
   - Add default values for dynamic timings.
   - Kill the chip->scan_bbt() hook.
   - Rename nand_default_bbt() into nand_create_bbt().
   - Start to clean the nand_chip structure.
   - Remove stale prototype from rawnand.h.

  Raw NAND controllers drivers changes:
   - Qcom: structuring cleanup.
   - Denali: use core helper to find the best ECC configuration.
   - Possible build of almost all drivers by adding a dependency on
     COMPILE_TEST for almost all of them in Kconfig, implies various
     fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even
     changes in sparc64 and ia64 architectures.
   - Clean the ->probe() functions error path of a lot of drivers.
   - Migrate all drivers to use nand_scan() instead of
     nand_scan_ident()/nand_scan_tail() pair.
   - Use mtd_device_register() where applicable to simplify the code.
   - Marvell:
      * Handle on-die ECC.
      * Better clocks handling.
      * Remove bogus comment.
      * Add suspend and resume support.
   - Tegra: add NAND controller driver.
   - Atmel:
      * Add module param to avoid using dma.
      * Drop Wenyou Yang from MAINTAINERS.
   - Denali: optimize timings handling.
   - FSMC: Stop using chip->read_buf().
   - FSL:
      * Switch to SPDX license tag identifiers.
      * Fix qualifiers in MXC init functions.

  Raw NAND chip drivers changes:
   - Micron:
      * Add fixup for ONFI revision.
      * Update ecc_stats.corrected.
      * Make ECC activation stateful.
      * Avoid enabling/disabling ECC when it can't be disabled.
      * Get the actual number of bitflips.
      * Allow forced on-die ECC.
      * Support 8/512 on-die ECC.
      * Fix on-die ECC detection logic.
   - Hynix:
      * Fix decoding the OOB size on H27UCG8T2BTR.
      * Use ->exec_op() in hynix_nand_reg_write_op()"

* tag 'mtd/for-4.19' of git://git.infradead.org/linux-mtd: (188 commits)
  mtd: rawnand: atmel: Select GENERIC_ALLOCATOR
  MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support
  mtd: rawnand: allocate dynamically ONFI parameters during detection
  mtd: spi-nor: only apply reset hacks to broken hardware
  mtd: spi-nor: cadence-quadspi: fix timeout handling
  mtd: spi-nor: atmel-quadspi: Include gpio/consumer.h instead of gpio.h
  mtd: spi-nor: intel-spi: use mtd_device_register()
  mtd: spi-nor: stm32-quadspi: replace "%p" with "%pK"
  mtd: spi-nor: atmel-quadspi: add suspend/resume hooks
  mtd: rawnand: allocate model parameter dynamically
  mtd: rawnand: do not export nand_scan_[ident|tail]() anymore
  mtd: rawnand: txx9ndfmc: convert driver to nand_scan()
  mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation
  mtd: rawnand: tegra: convert driver to nand_scan()
  mtd: rawnand: jz4740: convert driver to nand_scan()
  mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls
  mtd: rawnand: jz4740: fix probe function error path
  mtd: rawnand: docg4: convert driver to nand_scan()
  mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero
  mtd: rawnand: atmel: convert driver to nand_scan()
  ...

90 files changed, 5696 insertions, 2077 deletions

diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index cb0f1aad20b7..b9558ff20830 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -30,6 +30,7 @@ config BCMA_HOST_PCI
 
 config BCMA_HOST_SOC
 	bool "Support for BCMA in a SoC"
+	depends on HAS_IOMEM
 	help
 	  Host interface for a Broadcom AIX bus directly mapped into
 	  the memory. This only works with the Broadcom SoCs from the
@@ -61,7 +62,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
 
 config BCMA_DRIVER_MIPS
 	bool "BCMA Broadcom MIPS core driver"
-	depends on MIPS
+	depends on MIPS || COMPILE_TEST
 	help
 	  Driver for the Broadcom MIPS core attached to Broadcom specific
 	  Advanced Microcontroller Bus.
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 8d731d6c3e54..63389f075f1d 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -116,12 +116,14 @@ config FSL_CORENET_CF
 
 config FSL_IFC
 	bool
-	depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A
+	depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
+	depends on HAS_IOMEM
 
 config JZ4780_NEMC
 	bool "Ingenic JZ4780 SoC NEMC driver"
 	default y
-	depends on MACH_JZ4780
+	depends on MACH_JZ4780 || COMPILE_TEST
+	depends on HAS_IOMEM && OF
 	help
 	  This driver is for the NAND/External Memory Controller (NEMC) in
 	  the Ingenic JZ4780. This controller is used to handle external
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 46ab7feec6b6..c77f537323ec 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -24,7 +24,7 @@ config MTD_TESTS
 
 config MTD_REDBOOT_PARTS
 	tristate "RedBoot partition table parsing"
-	---help---
+	help
 	  RedBoot is a ROM monitor and bootloader which deals with multiple
 	  'images' in flash devices by putting a table one of the erase
 	  blocks on the device, similar to a partition table, which gives
@@ -45,7 +45,7 @@ if MTD_REDBOOT_PARTS
 config MTD_REDBOOT_DIRECTORY_BLOCK
 	int "Location of RedBoot partition table"
 	default "-1"
-	---help---
+	help
 	  This option is the Linux counterpart to the
 	  CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK RedBoot compile time
 	  option.
@@ -75,7 +75,7 @@ endif # MTD_REDBOOT_PARTS
 config MTD_CMDLINE_PARTS
 	tristate "Command line partition table parsing"
 	depends on MTD
-	---help---
+	help
 	  Allow generic configuration of the MTD partition tables via the kernel
 	  command line. Multiple flash resources are supported for hardware where
 	  different kinds of flash memory are available.
@@ -112,7 +112,7 @@ config MTD_CMDLINE_PARTS
 config MTD_AFS_PARTS
 	tristate "ARM Firmware Suite partition parsing"
 	depends on (ARM || ARM64)
-	---help---
+	help
 	  The ARM Firmware Suite allows the user to divide flash devices into
 	  multiple 'images'. Each such image has a header containing its name
 	  and offset/size etc.
@@ -136,7 +136,7 @@ config MTD_OF_PARTS
 
 config MTD_AR7_PARTS
 	tristate "TI AR7 partitioning support"
-	---help---
+	help
 	  TI AR7 partitioning support
 
 config MTD_BCM63XX_PARTS
@@ -170,7 +170,7 @@ config MTD_BLOCK
 	tristate "Caching block device access to MTD devices"
 	depends on BLOCK
 	select MTD_BLKDEVS
-	---help---
+	help
 	  Although most flash chips have an erase size too large to be useful
 	  as block devices, it is possible to use MTD devices which are based
 	  on RAM chips in this manner. This block device is a user of MTD
@@ -205,7 +205,7 @@ config FTL
 	tristate "FTL (Flash Translation Layer) support"
 	depends on BLOCK
 	select MTD_BLKDEVS
-	---help---
+	help
 	  This provides support for the original Flash Translation Layer which
 	  is part of the PCMCIA specification. It uses a kind of pseudo-
 	  file system on a flash device to emulate a block device with
@@ -222,7 +222,7 @@ config NFTL
 	tristate "NFTL (NAND Flash Translation Layer) support"
 	depends on BLOCK
 	select MTD_BLKDEVS
-	---help---
+	help
 	  This provides support for the NAND Flash Translation Layer which is
 	  used on M-Systems' DiskOnChip devices. It uses a kind of pseudo-
 	  file system on a flash device to emulate a block device with
@@ -246,7 +246,7 @@ config INFTL
 	tristate "INFTL (Inverse NAND Flash Translation Layer) support"
 	depends on BLOCK
 	select MTD_BLKDEVS
-	---help---
+	help
 	  This provides support for the Inverse NAND Flash Translation
 	  Layer which is used on M-Systems' newer DiskOnChip devices. It
 	  uses a kind of pseudo-file system on a flash device to emulate
@@ -261,10 +261,10 @@ config INFTL
 	  not use it.
 
 config RFD_FTL
-        tristate "Resident Flash Disk (Flash Translation Layer) support"
+	tristate "Resident Flash Disk (Flash Translation Layer) support"
 	depends on BLOCK
 	select MTD_BLKDEVS
-	---help---
+	help
 	  This provides support for the flash translation layer known
 	  as the Resident Flash Disk (RFD), as used by the Embedded BIOS
 	  of General Software. There is a blurb at:
@@ -308,7 +308,7 @@ config MTD_SWAP
 	select MTD_BLKDEVS
 	help
 	  Provides volatile block device driver on top of mtd partition
-          suitable for swapping.  The mapping of written blocks is not saved.
+	  suitable for swapping.  The mapping of written blocks is not saved.
 	  The driver provides wear leveling by storing erase counter into the
 	  OOB.
 
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index bbfa1f129266..39ec32a29051 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -44,7 +44,7 @@ choice
 	prompt "Flash cmd/query data swapping"
 	depends on MTD_CFI_ADV_OPTIONS
 	default MTD_CFI_NOSWAP
-	---help---
+	help
 	  This option defines the way in which the CPU attempts to arrange
 	  data bits when writing the 'magic' commands to the chips. Saying
 	  'NO', which is the default when CONFIG_MTD_CFI_ADV_OPTIONS isn't
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 1b64ac8c5bc8..72428b6bfc47 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1216,7 +1216,6 @@ static inline int do_read_secsi_onechip(struct map_info *map,
 					size_t grouplen)
 {
 	DECLARE_WAITQUEUE(wait, current);
-	unsigned long timeo = jiffies + HZ;
 
  retry:
 	mutex_lock(&chip->mutex);
@@ -1229,7 +1228,6 @@ static inline int do_read_secsi_onechip(struct map_info *map,
 
 		schedule();
 		remove_wait_queue(&chip->wq, &wait);
-		timeo = jiffies + HZ;
 
 		goto retry;
 	}
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index b57ceea21513..837b04ab96a9 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -202,16 +202,19 @@ static inline struct mtd_info *cfi_cmdset_unknown(struct map_info *map,
 	struct cfi_private *cfi = map->fldrv_priv;
 	__u16 type = primary?cfi->cfiq->P_ID:cfi->cfiq->A_ID;
 #ifdef CONFIG_MODULES
-	char probename[sizeof(VMLINUX_SYMBOL_STR(cfi_cmdset_%4.4X))];
 	cfi_cmdset_fn_t *probe_function;
+	char *probename;
 
-	sprintf(probename, VMLINUX_SYMBOL_STR(cfi_cmdset_%4.4X), type);
+	probename = kasprintf(GFP_KERNEL, "cfi_cmdset_%4.4X", type);
+	if (!probename)
+		return NULL;
 
 	probe_function = __symbol_get(probename);
 	if (!probe_function) {
 		request_module("cfi_cmdset_%4.4X", type);
 		probe_function = __symbol_get(probename);
 	}
+	kfree(probename);
 
 	if (probe_function) {
 		struct mtd_info *mtd;
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 57b02c4b3f63..e514d57a0419 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -5,7 +5,7 @@ menu "Self-contained MTD device drivers"
 config MTD_PMC551
 	tristate "Ramix PMC551 PCI Mezzanine RAM card support"
 	depends on PCI
-	---help---
+	help
 	  This provides a MTD device driver for the Ramix PMC551 RAM PCI card
 	  from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
 	  These devices come in