diff options
author | Arnd Bergmann <arnd@arndb.de> | 2015-10-14 17:07:32 +0200 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2015-10-14 17:07:32 +0200 |
commit | c049adc9fd2937562b4880bdc35b8303ff56d425 (patch) | |
tree | f75d32289b1053b3e65cb0e7d330079bee2c9a9b /drivers | |
parent | 273395f0c2973b96a35772f8aa3b65c25517a45d (diff) | |
parent | 68acc77a2d5197141ba376fd8872eccb43bfcd7d (diff) |
Merge tag 'arm-scpi-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers
Merge "ARM System Control and Power Interface(SCPI) support" from Sudeep Holla
It adds support for the following features provided by SCP firmware
using different subsystems in Linux:
1. SCPI mailbox protocol driver which using mailbox framework
2. Clocks provided by SCP using clock framework
3. CPU DVFS(cpufreq) using existing arm-big-little driver
4. SCPI based sensors including temperature sensors
* tag 'arm-scpi-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
hwmon: Support thermal zones registration for SCP temperature sensors
hwmon: Support sensors exported via ARM SCP interface
firmware: arm_scpi: Extend to support sensors
Documentation: add DT bindings for ARM SCPI sensors
cpufreq: arm_big_little: add SCPI interface driver
clk: scpi: add support for cpufreq virtual device
clk: add support for clocks provided by SCP(System Control Processor)
firmware: add support for ARM System Control and Power Interface(SCPI) protocol
Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/clk/Kconfig | 10 | ||||
-rw-r--r-- | drivers/clk/Makefile | 1 | ||||
-rw-r--r-- | drivers/clk/clk-scpi.c | 325 | ||||
-rw-r--r-- | drivers/cpufreq/Kconfig.arm | 10 | ||||
-rw-r--r-- | drivers/cpufreq/Makefile | 1 | ||||
-rw-r--r-- | drivers/cpufreq/scpi-cpufreq.c | 124 | ||||
-rw-r--r-- | drivers/firmware/Kconfig | 19 | ||||
-rw-r--r-- | drivers/firmware/Makefile | 1 | ||||
-rw-r--r-- | drivers/firmware/arm_scpi.c | 771 | ||||
-rw-r--r-- | drivers/hwmon/Kconfig | 8 | ||||
-rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
-rw-r--r-- | drivers/hwmon/scpi-hwmon.c | 288 |
12 files changed, 1559 insertions, 0 deletions
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 42f7120ca9ce..4aec54b90331 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -59,6 +59,16 @@ config COMMON_CLK_RK808 clocked at 32KHz each. Clkout1 is always on, Clkout2 can off by control register. +config COMMON_CLK_SCPI + tristate "Clock driver controlled via SCPI interface" + depends on ARM_SCPI_PROTOCOL || COMPILE_TEST + ---help--- + This driver provides support for clocks that are controlled + by firmware that implements the SCPI interface. + + This driver uses SCPI Message Protocol to interact with the + firmware providing all the clock controls. + config COMMON_CLK_SI5351 tristate "Clock driver for SiLabs 5351A/B/C" depends on I2C diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index d08b3e5985be..a381431bd950 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o +obj-$(CONFIG_COMMON_CLK_SCPI) += clk-scpi.o obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o diff --git a/drivers/clk/clk-scpi.c b/drivers/clk/clk-scpi.c new file mode 100644 index 000000000000..0b501a9fef92 --- /dev/null +++ b/drivers/clk/clk-scpi.c @@ -0,0 +1,325 @@ +/* + * System Control and Power Interface (SCPI) Protocol based clock driver + * + * Copyright (C) 2015 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/scpi_protocol.h> + +struct scpi_clk { + u32 id; + struct clk_hw hw; + struct scpi_dvfs_info *info; + struct scpi_ops *scpi_ops; +}; + +#define to_scpi_clk(clk) container_of(clk, struct scpi_clk, hw) + +static struct platform_device *cpufreq_dev; + +static unsigned long scpi_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct scpi_clk *clk = to_scpi_clk(hw); + + return clk->scpi_ops->clk_get_val(clk->id); +} + +static long scpi_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + /* + * We can't figure out what rate it will be, so just return the + * rate back to the caller. scpi_clk_recalc_rate() will be called + * after the rate is set and we'll know what rate the clock is + * running at then. + */ + return rate; +} + +static int scpi_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct scpi_clk *clk = to_scpi_clk(hw); + + return clk->scpi_ops->clk_set_val(clk->id, rate); +} + +static const struct clk_ops scpi_clk_ops = { + .recalc_rate = scpi_clk_recalc_rate, + .round_rate = scpi_clk_round_rate, + .set_rate = scpi_clk_set_rate, +}; + +/* find closest match to given frequency in OPP table */ +static int __scpi_dvfs_round_rate(struct scpi_clk *clk, unsigned long rate) +{ + int idx; + u32 fmin = 0, fmax = ~0, ftmp; + const struct scpi_opp *opp = clk->info->opps; + + for (idx = 0; idx < clk->info->count; idx++, opp++) { + ftmp = opp->freq; + if (ftmp >= (u32)rate) { + if (ftmp <= fmax) + fmax = ftmp; + break; + } else if (ftmp >= fmin) { + fmin = ftmp; + } + } + return fmax != ~0 ? fmax : fmin; +} + +static unsigned long scpi_dvfs_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct scpi_clk *clk = to_scpi_clk(hw); + int idx = clk->scpi_ops->dvfs_get_idx(clk->id); + const struct scpi_opp *opp; + + if (idx < 0) + return 0; + + opp = clk->info->opps + idx; + return opp->freq; +} + +static long scpi_dvfs_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct scpi_clk *clk = to_scpi_clk(hw); + + return __scpi_dvfs_round_rate(clk, rate); +} + +static int __scpi_find_dvfs_index(struct scpi_clk *clk, unsigned long rate) +{ + int idx, max_opp = clk->info->count; + const struct scpi_opp *opp = clk->info->opps; + + for (idx = 0; idx < max_opp; idx++, opp++) + if (opp->freq == rate) + return idx; + return -EINVAL; +} + +static int scpi_dvfs_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct scpi_clk *clk = to_scpi_clk(hw); + int ret = __scpi_find_dvfs_index(clk, rate); + + if (ret < 0) + return ret; + return clk->scpi_ops->dvfs_set_idx(clk->id, (u8)ret); +} + +static const struct clk_ops scpi_dvfs_ops = { + .recalc_rate = scpi_dvfs_recalc_rate, + .round_rate = scpi_dvfs_round_rate, + .set_rate = scpi_dvfs_set_rate, +}; + +static const struct of_device_id scpi_clk_match[] = { + { .compatible = "arm,scpi-dvfs-clocks", .data = &scpi_dvfs_ops, }, + { .compatible = "arm,scpi-variable-clocks", .data = &scpi_clk_ops, }, + {} +}; + +static struct clk * +scpi_clk_ops_init(struct device *dev, const struct of_device_id *match, + struct scpi_clk *sclk, const char *name) +{ + struct clk_init_data init; + struct clk *clk; + unsigned long min = 0, max = 0; + + init.name = name; + init.flags = CLK_IS_ROOT; + init.num_parents = 0; + init.ops = match->data; + sclk->hw.init = &init; + sclk->scpi_ops = get_scpi_ops(); + + if (init.ops == &scpi_dvfs_ops) { + sclk->info = sclk->scpi_ops->dvfs_get_info(sclk->id); + if (IS_ERR(sclk->info)) + return NULL; + } else if (init.ops == &scpi_clk_ops) { + if (sclk->scpi_ops->clk_get_range(sclk->id, &min, &max) || !max) + return NULL; + } else { + return NULL; + } + + clk = devm_clk_register(dev, &sclk->hw); + if (!IS_ERR(clk) && max) + clk_hw_set_rate_range(&sclk->hw, min, max); + return clk; +} + +struct scpi_clk_data { + struct scpi_clk **clk; + unsigned int clk_num; +}; + +static struct clk * +scpi_of_clk_src_get(struct of_phandle_args *clkspec, void *data) +{ + struct scpi_clk *sclk; + struct scpi_clk_data *clk_data = data; + unsigned int idx = clkspec->args[0], count; + + for (count = 0; count < clk_data->clk_num; count++) { + sclk = clk_data->clk[count]; + if (idx == sclk->id) + return sclk->hw.clk; + } + + return ERR_PTR(-EINVAL); +} + +static int scpi_clk_add(struct device *dev, struct device_node *np, + const struct of_device_id *match) +{ + struct clk **clks; + int idx, count; + struct scpi_clk_data *clk_data; + + count = of_property_count_strings(np, "clock-output-names"); + if (count < 0) { + dev_err(dev, "%s: invalid clock output count\n", np->name); + return -EINVAL; + } + + clk_data = devm_kmalloc(dev, sizeof(*clk_data), GFP_KERNEL); + if (!clk_data) + return -ENOMEM; + + clk_data->clk_num = count; + clk_data->clk = devm_kcalloc(dev, count, sizeof(*clk_data->clk), + GFP_KERNEL); + if (!clk_data->clk) + return -ENOMEM; + + clks = devm_kcalloc(dev, count, sizeof(*clks), GFP_KERNEL); + if (!clks) + return -ENOMEM; + + for (idx = 0; idx < count; idx++) { + struct scpi_clk *sclk; + const char *name; + u32 val; + + sclk = devm_kzalloc(dev, sizeof(*sclk), GFP_KERNEL); + if (!sclk) + return -ENOMEM; + + if (of_property_read_string_index(np, "clock-output-names", + idx, &name)) { + dev_err(dev, "invalid clock name @ %s\n", np->name); + return -EINVAL; + } + + if (of_property_read_u32_index(np, "clock-indices", + idx, &val)) { + dev_err(dev, "invalid clock index @ %s\n", np->name); + return -EINVAL; + } + + sclk->id = val; + + clks[idx] = scpi_clk_ops_init(dev, match, sclk, name); + if (IS_ERR_OR_NULL(clks[idx])) + dev_err(dev, "failed to register clock '%s'\n", name); + else + dev_dbg(dev, "Registered clock '%s'\n", name); + clk_data->clk[idx] = sclk; + } + + return of_clk_add_provider(np, scpi_of_clk_src_get, clk_data); +} + +static int scpi_clocks_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *child, *np = dev->of_node; + + if (cpufreq_dev) { + platform_device_unregister(cpufreq_dev); + cpufreq_dev = NULL; + } + + for_each_available_child_of_node(np, child) + of_clk_del_provider(np); + return 0; +} + +static int scpi_clocks_probe(struct platform_device *pdev) +{ + int ret; + struct device *dev = &pdev->dev; + struct device_node *child, *np = dev->of_node; + const struct of_device_id *match; + + if (!get_scpi_ops()) + return -ENXIO; + + for_each_available_child_of_node(np, child) { + match = of_match_node(scpi_clk_match, child); + if (!match) + continue; + ret = scpi_clk_add(dev, child, match); + if (ret) { + scpi_clocks_remove(pdev); + return ret; + } + } + /* Add the virtual cpufreq device */ + cpufreq_dev = platform_device_register_simple("scpi-cpufreq", + -1, NULL, 0); + if (!cpufreq_dev) + pr_warn("unable to register cpufreq device"); + + return 0; +} + +static const struct of_device_id scpi_clocks_ids[] = { + { .compatible = "arm,scpi-clocks", }, + {} +}; +MODULE_DEVICE_TABLE(of, scpi_clocks_ids); + +static struct platform_driver scpi_clocks_driver = { + .driver = { + .name = "scpi_clocks", + .of_match_table = scpi_clocks_ids, + }, + .probe = scpi_clocks_probe, + .remove = scpi_clocks_remove, +}; +module_platform_driver(scpi_clocks_driver); + +MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); +MODULE_DESCRIPTION("ARM SCPI clock driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index cd0391e46c6d..c737f7359974 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -199,6 +199,16 @@ config ARM_SA1100_CPUFREQ config ARM_SA1110_CPUFREQ bool +config ARM_SCPI_CPUFREQ + tristate "SCPI based CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL + help + This adds the CPUfreq driver support for ARM big.LITTLE platforms + using SCPI protocol for CPU power management. + + This driver uses SCPI Message Protocol driver to interact with the + firmware providing the CPU DVFS functionality. + config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 41340384f11f..ccfaa4c68a9a 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -72,6 +72,7 @@ obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o +obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c new file mode 100644 index 000000000000..2c3b16fd3a01 --- /dev/null +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -0,0 +1,124 @@ +/* + * System Control and Power Interface (SCPI) based CPUFreq Interface driver + * + * It provides necessary ops to arm_big_little cpufreq driver. + * + * Copyright (C) 2015 ARM Ltd. + * Sudeep Holla <sudeep.holla@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/cpufreq.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/scpi_protocol.h> +#include <linux/types.h> + +#include "arm_big_little.h" + +static struct scpi_ops *scpi_ops; + +static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev) +{ + u8 domain = topology_physical_package_id(cpu_dev->id); + + if (domain < 0) + return ERR_PTR(-EINVAL); + return scpi_ops->dvfs_get_info(domain); +} + +static int scpi_opp_table_ops(struct device *cpu_dev, bool remove) +{ + int idx, ret = 0; + struct scpi_opp *opp; + struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev); + + if (IS_ERR(info)) + return PTR_ERR(info); + + if (!info->opps) + return -EIO; + + for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) { + if (remove) + dev_pm_opp_remove(cpu_dev, opp->freq); + else + ret = dev_pm_opp_add(cpu_dev, opp->freq, + opp->m_volt * 1000); + if (ret) { + dev_warn(cpu_dev, "failed to add opp %uHz %umV\n", + opp->freq, opp->m_volt); + while (idx-- > 0) + dev_pm_opp_remove(cpu_dev, (--opp)->freq); + return ret; + } + } + return ret; +} + +static int scpi_get_transition_latency(struct device *cpu_dev) +{ + struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev); + + if (IS_ERR(info)) + return PTR_ERR(info); + return info->latency; +} + +static int scpi_init_opp_table(struct device *cpu_dev) +{ + return scpi_opp_table_ops(cpu_dev, false); +} + +static void scpi_free_opp_table(struct device *cpu_dev) +{ + scpi_opp_table_ops(cpu_dev, true); +} + +static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = { + .name = "scpi", + .get_transition_latency = scpi_get_transition_latency, + .init_opp_table = scpi_init_opp_table, + .free_opp_table = scpi_free_opp_table, +}; + +static int scpi_cpufreq_probe(struct platform_device *pdev) +{ + scpi_ops = get_scpi_ops(); + if (!scpi_ops) + return -EIO; + + return bL_cpufreq_register(&scpi_cpufreq_ops); +} + +static int scpi_cpufreq_remove(struct platform_device *pdev) +{ + bL_cpufreq_unregister(&scpi_cpufreq_ops); + scpi_ops = NULL; + return 0; +} + +static struct platform_driver scpi_cpufreq_platdrv = { + .driver = { + .name = "scpi-cpufreq", + .owner = THIS_MODULE, + }, + .probe = scpi_cpufreq_probe, + .remove = scpi_cpufreq_remove, +}; +module_platform_driver(scpi_cpufreq_platdrv); + +MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); +MODULE_DESCRIPTION("ARM SCPI CPUFreq interface driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 665efca59487..d00c6d338cc3 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -8,6 +8,25 @@ menu "Firmware Drivers" config ARM_PSCI_FW bool +config ARM_SCPI_PROTOCOL + tristate "ARM System Control and Power Interface (SCPI) Message Protocol" + depends on ARM_MHU + help + System Control and Power Interface (SCPI) Message Protocol is + defined for the purpose of communication between the Application + Cores(AP) and the System Control Processor(SCP). The MHU peripheral + provides a mechanism for inter-processor communication between SCP + and AP. + + SCP controls most of the power managament on the Application + Processors. It offers control and management of: the core/cluster + power states, various power domain DVFS including the core/cluster, + certain system clocks configuration, thermal sensors and many + others. + + This protocol library provides interface for all the client drivers + making use of the features offered by the SCP. + config EDD tristate "BIOS Enhanced Disk Drive calls determine boot disk" depends on X86 diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 2ee83474a3c1..b8a521741418 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -2,6 +2,7 @@ # Makefile for the linux kernel. # obj-$(CONFIG_ARM_PSCI_FW) += psci.o +obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o obj-$(CONFIG_DMI) += dmi_scan.o obj-$(CONFIG_DMI_SYSFS) += dmi-sysfs.o obj-$(CONFIG_EDD) += edd.o diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c new file mode 100644 index 000000000000..6174db80c663 --- /dev/null +++ b/drivers/firmware/arm_scpi.c @@ -0,0 +1,771 @@ +/* + * System Control and Power Interface (SCPI) Message Protocol driver + * + * SCPI Message Protocol is used between the System Control Processor(SCP) + * and the Application Processors(AP). The Message Handling Unit(MHU) + * provides a mechanism for inter-processor communication between SCP's + * Cortex M3 and AP. + * + * SCP offers control and management of the core/cluster power states, + * various power domain DVFS including the core/cluster, certain system + * clocks configuration, thermal sensors and many others. + * + * Copyright (C) 2015 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/bitmap.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/mailbox_client.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/printk.h> +#include <linux/scpi_protocol.h> +#include <linux/slab.h> +#include <linux/sort.h> +#include <linux/spinlock.h> + +#define CMD_ID_SHIFT 0 +#define CMD_ID_MASK 0x7f +#define CMD_TOKEN_ID_SHIFT 8 +#define CMD_TOKEN_ID_MASK 0xff +#define CMD_DATA_SIZE_SHIFT 16 +#define CMD_DATA_SIZE_MASK 0x1ff +#define PACK_SCPI_CMD(cmd_id, tx_sz) \ + ((((cmd_id) & CMD_ID_MASK) << CMD_ID_SHIFT) | \ + (((tx_sz) & CMD_DATA_SIZE_MASK) << CMD_DATA_SIZE_SHIFT)) +#define ADD_SCPI_TOKEN(cmd, token) \ + ((cmd) |= (((token) & CMD_TOKEN_ID_MASK) << CMD_TOKEN_ID_SHIFT)) + +#define CMD_SIZE(cmd) (((cmd) >> CMD_DATA_SIZE_SHIFT) & CMD_DATA_SIZE_MASK) +#define CMD_UNIQ_MASK (CMD_TOKEN_ID_MASK << CMD_TOKEN_ID_SHIFT | CMD_ID_MASK) +#define CMD_XTRACT_UNIQ(cmd) ((cmd) & CMD_UNIQ_MASK) + +#define SCPI_SLOT 0 + +#define MAX_DVFS_DOMAINS 8 +#define MAX_DVFS_OPPS 8 +#define DVFS_LATENCY(hdr) (le32_to_cpu(hdr) >> 16) +#define DVFS_OPP_COUNT(hdr) ((le32_to_cpu(hdr) >> 8) & 0xff) + +#define PROTOCOL_REV_MINOR_BITS 16 +#define PROTOCOL_REV_MINOR_MASK ((1U << PROTOCOL_REV_MINOR_BITS) - 1) +#define PROTOCOL_REV_MAJOR(x) ((x) >> PROTOCOL_REV_MINOR_BITS) +#define PROTOCOL_REV_MINOR(x) ((x) & PROTOCOL_REV_MINOR_MASK) + +#define FW_REV_MAJOR_BITS 24 +#define FW_REV_MINOR_BITS 16 +#define FW_REV_PATCH_MASK ((1U << FW_REV_MINOR_BITS) - 1) +#define FW_REV_MINOR_MASK ((1U << FW_REV_MAJOR_BITS) - 1) +#define FW_REV_MAJOR(x) ((x) >> FW_REV_MAJOR_BITS) +#define FW_REV_MINOR(x) (((x) & FW_REV_MINOR_MASK) >> FW_REV_MINOR_BITS) +#define FW_REV_PATCH(x) ((x) & FW_REV_PATCH_MASK) + +#define MAX_RX_TIMEOUT (msecs_to_jiffies(20)) + +enum scpi_error_codes { + SCPI_SUCCESS = 0, /* Success */ + SCPI_ERR_PARAM = 1, /* Invalid parameter(s) */ + SCPI_ERR_ALIGN = 2, /* Invalid alignment */ + SCPI_ERR_SIZE = 3, /* Invalid size */ + SCPI_ERR_HANDLER = 4, /* Invalid handler/callback */ + SCPI_ERR_ACCESS = 5, /* Invalid access/permission denied */ + SCPI_ERR_RANGE = 6, /* Value out of range */ + SCPI_ERR_TIMEOUT = 7, /* Timeout has occurred */ + SCPI_ERR_NOMEM = 8, /* Invalid memory area or pointer */ + SCPI_ERR_PWRSTATE = 9, /* Invalid power state */ + SCPI_ERR_SUPPORT = 10, /* Not supported or disabled */ + SCPI_ERR_DEVICE = 11, /* Device error */ + SCPI_ERR_BUSY = 12, /* Device busy */ + SCPI_ERR_MAX +}; + +enum scpi_std_cmd { + SCPI_CMD_INVALID = 0x00, + SCPI_CMD_SCPI_READY = 0x01, + SCPI_CMD_SCPI_CAPABILITIES = 0x02, + SCPI_CMD_SET_CSS_PWR_STATE = 0x03, + SCPI_CMD_GET_CSS_PWR_STATE = 0x04, + SCPI_CMD_SET_SYS_PWR_STATE = 0x05, + SCPI_CMD_SET_CPU_TIMER = 0x06, + SCPI_CMD_CANCEL_CPU_TIMER = 0x07, + SCPI_CMD_DVFS_CAPABILITIES = 0x08, + SCPI_CMD_GET_DVFS_INFO = 0x09, + SCPI_CMD_SET_DVFS = 0x0a, + SCPI_CMD_GET_DVFS = 0x0b, + SCPI_CMD_GET_DVFS_STAT = 0x0c, + SCPI_CMD_CLOCK_CAPABILITIES = 0x0d, + SCPI_CMD_GET_CLOCK_INFO = 0x0e, + SCPI_CMD_SET_CLOCK_VALUE = 0x0f, + SCPI_CMD_GET_CLOCK_VALUE = 0x10, + SCPI_CMD_PSU_CAPABILITIES = 0x11, + SCPI_CMD_GET_PSU_INFO = 0x12, + SCPI_CMD_SET_PSU = 0x13, + SCPI_CMD_GET_PSU = 0x14, + SCPI_CMD_SENSOR_CAPABILITIES = 0x15, + SCPI_CMD_SENSOR_INFO = 0x16, + SCPI_CMD_SENSOR_VALUE = 0x17, + SCPI_CMD_SENSOR_CFG_PERIODIC = 0x18, + SCPI_CMD_SENSOR_CFG_BOUNDS = 0x19, + SCPI_CMD_SENSOR_ASYNC_VALUE = 0x1a, + SCPI_CMD_SET_DEVICE_PWR_STATE = 0x1b, + SCPI_CMD_GET_DEVICE_PWR_STATE = 0x1c, + SCPI_CMD_COUNT +}; + +struct scpi_xfer { + u32 slot; /* has to be first element */ + u32 cmd; + u32 status; + const void *tx_buf; + void *rx_buf; + unsigned int tx_len; + unsigned int rx_len; + struct list_head node; + struct completion done; +}; + +struct scpi_chan { + struct mbox_client cl; + struct mbox_chan *chan; + void __iomem *tx_payload; + void __iomem *rx_payload; + struct list_head rx_pending; + struct list_head xfers_list; + struct scpi_xfer *xfers; + spinlock_t rx_lock; /* locking for the rx pending list */ + struct mutex xfers_lock; + u8 token; +}; + +struct scpi_drvinfo { + u32 protocol_version; + u32 firmware_version; + int num_chans; + atomic_t next_chan; + struct scpi_ops *scpi_ops; + struct scpi_chan *channels; + struct scpi_dvfs_info *dvfs[MAX_DVFS_DOMAINS]; +}; + +/* + * The SCP firmware only executes in little-endian mode, so any buffers + * shared through SCPI should have their contents converted to little-endian + */ +struct scpi_shared_mem { + __le32 command; + __le32 status; + u8 payload[0]; +} __packed; + +struct scp_capabilities { + __le32 protocol_version; + __le32 event_version; + __le32 platform_version; + __le32 commands[4]; +} __packed; + +struct clk_get_info { + __le16 id; + __le16 flags; + __le32 min_rate; + __le32 max_rate; + u8 name[20]; +} __packed; + +struct clk_get_value { + __le32 rate; +} __packed; + +struct clk_set_value { + __le16 id; + __le16 reserved; + __le32 rate; +} __packed; + +struct dvfs_info { + __le32 header; + struct { + __le32 freq; + __le32 m_volt; + } opps[MAX_DVFS_OPPS]; +} __packed; + +struct dvfs_get { + u8 index; +} __packed; + +struct dvfs_set { + u8 domain; + u8 index; +} __packed; + +struct sensor_capabilities { + __le16 sensors; +} __packed; + +struct _scpi_sensor_info { + __le16 sensor_id; + u8 class; + u8 trigger_type; + char name[20]; +}; + +struct sensor_value { + __le32 val; +} __packed; + +static struct scpi_drvinfo *scpi_info; + +static int scpi_linux_errmap[SCPI_ERR_MAX] = { + /* better than switch case as long as return value is continuous */ + 0, /* SCPI_SUCCESS */ + -EINVAL, /* SCPI_ERR_PARAM */ + -ENOEXEC, /* SCPI_ERR_ALIGN */ + -EMSGSIZE, /* SCPI_ERR_SIZE */ + -EINVAL, /* SCPI_ERR_HANDLER */ + -EACCES, /* SCPI_ERR_ACCESS */ + -ERANGE, /* SCPI_ERR_RANGE */ + -ETIMEDOUT, /* SCPI_ERR_TIMEOUT */ + -ENOMEM, /* SCPI_ERR_NOMEM */ + -EINVAL, /* SCPI_ERR_PWRSTATE */ + -EOPNOTSUPP, /* SCPI_ERR_SUPPORT */ + -EIO, /* SCPI_ERR_DEVICE */ + -EBUSY, /* SCPI_ERR_BUSY */ +}; + +static inline int scpi_to_linux_errno(int errno) +{ + if (errno >= SCPI_SUCCESS && errno < SCPI_ERR_MAX) + return scpi_linux_errmap[errno]; + return -EIO; +} + +static void scpi_process_cmd(struct scpi_chan *ch, u32 cmd) +{ + unsigned long flags; + struct scpi_xfer *t, *match = NULL; + + spin_lock_irqsave(&ch->rx_lock, flags); + if (list_empty(&ch->rx_pending)) { + spin_unlock_irqrestore(&ch->rx_lock, flags); + return; + } + + list_for_each_entry(t, &ch->rx_pending, node) + if (CMD_XTRACT_UNIQ(t->cmd) == CMD_XTRACT_UNIQ(cmd)) { + list_del(&t->node); + match = t; + break; + } + /* check if wait_for_completion is in progress or timed-out */ + if (match && !completion_done(&match->done)) { + struct scpi_shared_mem *mem = ch->rx_payload; + unsigned int len = min(match->rx_len, CMD_SIZE(cmd)); + + match->status = le32_to_cpu(mem->status); + memcpy_fromio(match->rx_buf, mem->payload, len); + if (match->rx_len > len) + memset(match->rx_buf + len, 0, match->rx_len - len); + complete(&match->done); + } + spin_unlock_irqrestore(&ch->rx_lock, flags); +} + +static void scpi_handle_remote_msg(struct mbox_client *c, void *msg) +{ + struct scpi_chan *ch = container_of(c, struct scpi_chan, cl); + struct scpi_shared_mem *mem = ch->rx_payload; + u32 cmd = le32_to_cpu(mem->command); + + scpi_process_cmd(ch, cmd); +} + +static void scpi_tx_prepare(struct mbox_client *c, void *msg) +{ + unsigned long flags; + struct scpi_xfer *t = msg; + struct scpi_chan *ch = container_of(c, struct scpi_chan, cl); + struct scpi_shared_mem *mem = (struct scpi_shared_mem *)ch->tx_payload; + + if (t->tx_buf) + memcpy_toio(mem->payload, t->tx_buf, t->tx_len); + if (t->rx_buf) { + if (!(++ch->token)) + ++ch->token; + ADD_SCPI_TOKEN(t->cmd, ch->token); + spin_lock_irqsave(&ch->rx_lock, flags); + list_add_tail(&t->node, &ch->rx_pending); + spin_unlock_irqrestore(&ch->rx_lock, flags); + } + mem->command = cpu_to_le32(t->cmd); +} + +static struct scpi_xfer *get_scpi_xfer(struct scpi_chan *ch) +{ + struct scpi_xfer *t; + + mutex_lock(&ch->xfers_lock); + if (list_empty(&ch->xfers_list)) { + mutex_unlock(&ch->xfers_lock); + return NULL; + } + t = list_first_entry(&ch->xfers_list, struct scpi_xfer, node); + list_del(&t->node); + mutex_unlock(&ch->xfers_lock); + return t; +} + +static void put_scpi_xfer(struct scpi_xfer *t, struct scpi_chan *ch) +{ + mutex_lock(&ch->xfers_lock); + list_add_tail(&t->node, &ch->xfers_list); + mutex_unlock(&ch->xfers_lock); +} + +static int scpi_send_message(u8 cmd, void *tx_buf, unsigned int tx_len, + void *rx_buf, unsigned int rx_len) +{ + int ret; + u8 chan; + struct scpi_xfer *msg; + struct scpi_chan *scpi_chan; + + chan = atomic_inc_return(&scpi_info->next_chan) % scpi_info->num_chans; + scpi_chan = scpi_info->channels + chan; + + msg = get_scpi_xfer(scpi_chan); + if (!msg) + return -ENOMEM; + + msg->slot = BIT(SCPI_SLOT); + msg->cmd = PACK_SCPI_CMD(cmd, tx_len); + msg->tx_buf = tx_buf; + msg->tx_len = tx_len; + msg->rx_buf = rx_buf; + msg->rx_len = rx_len; + init_completion(&msg->done); + + ret = mbox_send_message(scpi_chan->chan, msg); + if (ret < 0 || !rx_buf) + goto out; + + if (!wait_for_completion_timeout(&msg->done, MAX_RX_TIMEOUT)) + ret = -ETIMEDOUT; + else + /* first status word */ + ret = le32_to_cpu(msg->status); +out: + if (ret < 0 && rx_buf) /* remove entry from the list if timed-out */ + scpi_process_cmd(scpi_chan, msg->cmd); + + put_scpi_xfer(msg, scpi_chan); + /* SCPI error codes > 0, translate them to Linux scale*/ + return ret > 0 ? scpi_to_linux_errno(ret) : ret; +} + +static u32 scpi_get_version(void) +{ + return scpi_info->protocol_version; +} + +static int +scpi_clk_get_range(u16 clk_id, unsigned long *min, unsigned long *max) +{ + int ret; + struct clk_get_info clk; + __le16 le_clk_id = cpu_to_le16(clk_id); + + ret = scpi_send_message(SCPI_CMD_GET_CLOCK_INFO, &le_clk_id, + sizeof(le_clk_id), &clk, sizeof(clk)); + if (!ret) { + *min = le32_to_cpu(clk.min_rate); + *max = le32_to_cpu(clk.max_rate); + } + return ret; +} + +static unsigned long scpi_clk_get_val(u16 clk_id) +{ + int ret; + struct clk_get_value clk; + __le16 le_clk_id = cpu_to_le16(clk_id); + + ret = scpi_send_message(SCPI_CMD_GET_CLOCK_VALUE, &le_clk_id, + sizeof(le_clk_id), &clk, sizeof(clk)); + return ret ? ret : le32_to_cpu(clk.rate); +} + +static int scpi_clk_set_val(u16 clk_id, unsigned long rate) +{ + int stat; + struct clk_set_value clk = { + .id = cpu_to_le16(clk_id), + .rate = cpu_to_le32(rate) + }; + + return scpi_send_message(SCPI_CMD_SET_CLOCK_VALUE, &clk, sizeof(clk), + &stat, sizeof(stat)); |