Merge tag 'mmc-v3.17-1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "Me and Chris Ball decided to try out using my MMC tree as the primary
  one, to simplify handling of patches.

  This pull does thus contains all the MMC patches for 3.17 rc1, no pull
  from Chris this time.

  Details:

  MMC core:
   - forward compatibility for eMMC
   - fix some blacklisted cards with broken secure discard

  MMC host:
   - mmci: Add support for Qualcomm variant
   - mmci: Fix regression for arm_variant
   - sdhci: Various fixes and cleanups
   - sdhci: Improve external VDD regulator support
   - sdhci: Support for DDR50 1.8V mode for BayTrail
   - sdhci-st: Add driver for ST SDHCI controller
   - sh-mmcif: DMA fixes
   - omap_hsmmc: Add support for SDIO interrupts
   - sdhci-pci: Add support for Intel Quark X1000
   - dw_mmc: Update the reset sequence
   - s3cmci: port DMA code to dmaengine API"

* tag 'mmc-v3.17-1' of git://git.linaro.org/people/ulf.hansson/mmc: (67 commits)
  mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed
  mmc: dw_mmc: Slot quirk "disable-wp" is deprecated.
  mmc: mmci: Reverse IRQ handling for the arm_variant
  mmc: mmci: Move all CMD irq handling to mmci_cmd_irq()
  mmc: mmci: Remove redundant check of status for DATA irq
  mmc: dw_mmc: change to use recommended reset procedure
  mmc: sdhci-pxav3: Use devm_* managed helpers
  mmc: tmio: Configure DMA slave bus width
  mmc: sh_mmcif: Configure DMA slave bus width
  mmc: sh_mmcif: Fix DMA slave address configuration
  mmc: sh_mmcif: Document DT bindings
  mmc: sdhci-pci: remove PCI PM functions in suspend/resume callback
  mmc: Do not advertise secure discard if it is blacklisted
  mmc: sdhci-msm: Get COMPILE_TEST support
  mmc: sdhci-msm: Remove unnecessary header file inclusion
  mmc: sdhci-msm: Fix the binding example
  mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC Controller
  mmc: sdhci: Preset value not supported in Baytrail eMMC
  mmc: MMC_USDHI6ROL0 should depend on HAS_DMA
  mmc: MMC_SH_MMCIF should depend on HAS_DMA
  ...

28 files changed, 906 insertions, 436 deletions

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 452782bffebc..ede41f05c392 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -2028,8 +2028,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		/* complete ongoing async transfer before issuing discard */
 		if (card->host->areq)
 			mmc_blk_issue_rw_rq(mq, NULL);
-		if (req->cmd_flags & REQ_SECURE &&
-			!(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN))
+		if (req->cmd_flags & REQ_SECURE)
 			ret = mmc_blk_issue_secdiscard_rq(mq, req);
 		else
 			ret = mmc_blk_issue_discard_rq(mq, req);
@@ -2432,6 +2431,8 @@ static int mmc_blk_probe(struct mmc_card *card)
 	if (!(card->csd.cmdclass & CCC_BLOCK_READ))
 		return -ENODEV;
 
+	mmc_fixup_device(card, blk_fixups);
+
 	md = mmc_blk_alloc(card);
 	if (IS_ERR(md))
 		return PTR_ERR(md);
@@ -2446,7 +2447,6 @@ static int mmc_blk_probe(struct mmc_card *card)
 		goto out;
 
 	mmc_set_drvdata(card, md);
-	mmc_fixup_device(card, blk_fixups);
 
 	if (mmc_add_disk(md))
 		goto out;
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index d2dbf02022bd..8a1f1240e058 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -180,7 +180,6 @@ static int mmc_bus_resume(struct device *dev)
 #endif
 
 #ifdef CONFIG_PM_RUNTIME
-
 static int mmc_runtime_suspend(struct device *dev)
 {
 	struct mmc_card *card = mmc_dev_to_card(dev);
@@ -196,17 +195,10 @@ static int mmc_runtime_resume(struct device *dev)
 
 	return host->bus_ops->runtime_resume(host);
 }
-
-static int mmc_runtime_idle(struct device *dev)
-{
-	return 0;
-}
-
 #endif /* !CONFIG_PM_RUNTIME */
 
 static const struct dev_pm_ops mmc_bus_pm_ops = {
-	SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume,
-			mmc_runtime_idle)
+	SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume, NULL)
 	SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume)
 };
 
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 7dc0c85fdb60..d03a080fb9cd 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2102,7 +2102,8 @@ EXPORT_SYMBOL(mmc_can_sanitize);
 
 int mmc_can_secure_erase_trim(struct mmc_card *card)
 {
-	if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN)
+	if ((card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN) &&
+	    !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN))
 		return 1;
 	return 0;
 }
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 793c6f7ddb04..1eda8dd8c867 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -324,13 +324,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		}
 	}
 
+	/*
+	 * The EXT_CSD format is meant to be forward compatible. As long
+	 * as CSD_STRUCTURE does not change, all values for EXT_CSD_REV
+	 * are authorized, see JEDEC JESD84-B50 section B.8.
+	 */
 	card->ext_csd.rev = ext_csd[EXT_CSD_REV];
-	if (card->ext_csd.rev > 7) {
-		pr_err("%s: unrecognised EXT_CSD revision %d\n",
-			mmc_hostname(card->host), card->ext_csd.rev);
-		err = -EINVAL;
-		goto out;
-	}
 
 	card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0];
 	card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1];
diff --git a/drivers/mmc/core/quirks.c b/drivers/mmc/core/quirks.c
index 6c36fccaa1ec..dd1d1e0fe322 100644
--- a/drivers/mmc/core/quirks.c
+++ b/drivers/mmc/core/quirks.c
@@ -91,7 +91,7 @@ void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table)
 		    (f->cis_device == card->cis.device ||
 		     f->cis_device == (u16) SDIO_ANY_ID) &&
 		    rev >= f->rev_start && rev <= f->rev_end) {
-			dev_dbg(&card->dev, "calling %pF\n", f->vendor_fixup);
+			dev_dbg(&card->dev, "calling %pf\n", f->vendor_fixup);
 			f->vendor_fixup(card, f->data);
 		}
 	}
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index 274ef00b4463..48d0c93ba25a 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -184,6 +184,9 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 		mmc_delay(10);
 	}
 
+	if (!i)
+		pr_err("%s: card never left busy state\n", mmc_hostname(host));
+
 	if (rocr && !mmc_host_is_spi(host))
 		*rocr = cmd.resp[0];
 
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index a5652548230a..451135822464 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -290,6 +290,18 @@ config MMC_MOXART
 	  be found on some embedded hardware such as UC-7112-LX.
 	  If you have a controller with this interface, say Y here.
 
+config MMC_SDHCI_ST
+	tristate "SDHCI support on STMicroelectronics SoC"
+	depends on ARCH_STI
+	depends on MMC_SDHCI_PLTFM
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This selects the Secure Digital Host Controller Interface in
+	  STMicroelectronics SoCs.
+
+	  If you have a controller with this interface, say Y or M here.
+	  If unsure, say N.
+
 config MMC_OMAP
 	tristate "TI OMAP Multimedia Card Interface support"
 	depends on ARCH_OMAP
@@ -303,6 +315,7 @@ config MMC_OMAP
 
 config MMC_OMAP_HS
 	tristate "TI OMAP High Speed Multimedia Card Interface support"
+	depends on HAS_DMA
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	help
 	  This selects the TI OMAP High Speed Multimedia card Interface.
@@ -343,7 +356,7 @@ config MMC_ATMELMCI
 
 config MMC_SDHCI_MSM
 	tristate "Qualcomm SDHCI Controller Support"
-	depends on ARCH_QCOM
+	depends on ARCH_QCOM || (ARM && COMPILE_TEST)
 	depends on MMC_SDHCI_PLTFM
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
@@ -440,6 +453,7 @@ config MMC_SPI
 config MMC_S3C
 	tristate "Samsung S3C SD/MMC Card Interface support"
 	depends on ARCH_S3C24XX
+	depends on S3C24XX_DMAC
 	help
 	  This selects a driver for the MCI interface found in
           Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
@@ -477,15 +491,6 @@ config MMC_S3C_DMA
 	  working properly and needs to be debugged before this
 	  option is useful.
 
-config MMC_S3C_PIODMA
-	bool "Support for both PIO and DMA"
-	help
-	  Compile both the PIO and DMA transfer routines into the
-	  driver and let the platform select at run-time which one
-	  is best.
-
-	  See notes for the DMA option.
-
 endchoice
 
 config MMC_SDRICOH_CS
@@ -623,7 +628,7 @@ config MMC_DW_PCI
 
 config MMC_SH_MMCIF
 	tristate "SuperH Internal MMCIF support"
-	depends on MMC_BLOCK
+	depends on MMC_BLOCK && HAS_DMA
 	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
 	help
 	  This selects the MMC Host Interface controller (MMCIF).
@@ -697,6 +702,7 @@ config MMC_WMT
 
 config MMC_USDHI6ROL0
 	tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
+	depends on HAS_DMA
 	help
 	  This selects support for the Renesas USDHI6ROL0 SD/SDIO
 	  Host Controller
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 7f81ddf1dd2c..f211eede8db5 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
 obj-$(CONFIG_MMC_SDHCI_BCM_KONA)	+= sdhci-bcm-kona.o
 obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= sdhci-bcm2835.o
 obj-$(CONFIG_MMC_SDHCI_MSM)		+= sdhci-msm.o
+obj-$(CONFIG_MMC_SDHCI_ST)		+= sdhci-st.o
 
 ifeq ($(CONFIG_CB710_DEBUG),y)
 	CFLAGS-cb710-mmc	+= -DDEBUG
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 1ac227c603b7..8f216edbdf08 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -111,8 +111,7 @@ static const u8 tuning_blk_pattern_8bit[] = {
 	0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
 };
 
-static inline bool dw_mci_fifo_reset(struct dw_mci *host);
-static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host);
+static bool dw_mci_reset(struct dw_mci *host);
 
 #if defined(CONFIG_DEBUG_FS)
 static int dw_mci_req_show(struct seq_file *s, void *v)
@@ -997,7 +996,8 @@ static int dw_mci_get_ro(struct mmc_host *mmc)
 	int gpio_ro = mmc_gpio_get_ro(mmc);
 
 	/* Use platform get_ro function, else try on board write protect */
-	if (slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT)
+	if ((slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT) ||
+			(slot->host->quirks & DW_MCI_QUIRK_NO_WRITE_PROTECT))
 		read_only = 0;
 	else if (!IS_ERR_VALUE(gpio_ro))
 		read_only = gpio_ro;
@@ -1235,7 +1235,7 @@ static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
 		 * After an error, there may be data lingering
 		 * in the FIFO
 		 */
-		dw_mci_fifo_reset(host);
+		dw_mci_reset(host);
 	} else {
 		data->bytes_xfered = data->blocks * data->blksz;
 		data->error = 0;
@@ -1352,7 +1352,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
 
 			/* CMD error in data command */
 			if (mrq->cmd->error && mrq->data)
-				dw_mci_fifo_reset(host);
+				dw_mci_reset(host);
 
 			host->cmd = NULL;
 			host->data = NULL;
@@ -1963,14 +1963,8 @@ static void dw_mci_work_routine_card(struct work_struct *work)
 			}
 
 			/* Power down slot */
-			if (present == 0) {
-				/* Clear down the FIFO */
-				dw_mci_fifo_reset(host);
-#ifdef CONFIG_MMC_DW_IDMAC
-				dw_mci_idmac_reset(host);
-#endif
-
-			}
+			if (present == 0)
+				dw_mci_reset(host);
 
 			spin_unlock_bh(&host->lock);
 
@@ -2021,8 +2015,11 @@ static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
 
 	/* get quirks */
 	for (idx = 0; idx < ARRAY_SIZE(of_slot_quirks); idx++)
-		if (of_get_property(np, of_slot_quirks[idx].quirk, NULL))
+		if (of_get_property(np, of_slot_quirks[idx].quirk, NULL)) {
+			dev_warn(dev, "Slot quirk %s is deprecated\n",
+					of_slot_quirks[idx].quirk);
 			quirks |= of_slot_quirks[idx].id;
+		}
 
 	return quirks;
 }
@@ -2208,8 +2205,11 @@ static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
 	return false;
 }
 
-static inline bool dw_mci_fifo_reset(struct dw_mci *host)
+static bool dw_mci_reset(struct dw_mci *host)
 {
+	u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET;
+	bool ret = false;
+
 	/*
 	 * Reseting generates a block interrupt, hence setting
 	 * the scatter-gather pointer to NULL.
@@ -2219,15 +2219,60 @@ static inline bool dw_mci_fifo_reset(struct dw_mci *host)
 		host->sg = NULL;
 	}
 
-	return dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET);
-}
+	if (host->use_dma)
+		flags |= SDMMC_CTRL_DMA_RESET;
 
-static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host)
-{
-	return dw_mci_ctrl_reset(host,
-				 SDMMC_CTRL_FIFO_RESET |
-				 SDMMC_CTRL_RESET |
-				 SDMMC_CTRL_DMA_RESET);
+	if (dw_mci_ctrl_reset(host, flags)) {
+		/*
+		 * In all cases we clear the RAWINTS register to clear any
+		 * interrupts.
+		 */
+		mci_writel(host, RINTSTS, 0xFFFFFFFF);
+
+		/* if using dma we wait for dma_req to clear */
+		if (host->use_dma) {
+			unsigned long timeout = jiffies + msecs_to_jiffies(500);
+			u32 status;
+			do {
+				status = mci_readl(host, STATUS);
+				if (!(status & SDMMC_STATUS_DMA_REQ))
+					break;
+				cpu_relax();
+			} while (time_before(jiffies, timeout));
+
+			if (status & SDMMC_STATUS_DMA_REQ) {
+				dev_err(host->dev,
+					"%s: Timeout waiting for dma_req to "
+					"clear during reset\n", __func__);
+				goto ciu_out;
+			}
+
+			/* when using DMA next we reset the fifo again */
+			if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET))
+				goto ciu_out;
+		}
+	} else {
+		/* if the controller reset bit did clear, then set clock regs */
+		if (!(mci_readl(host, CTRL) & SDMMC_CTRL_RESET)) {
+			dev_err(host->dev, "%s: fifo/dma reset bits didn't "
+				"clear but ciu was reset, doing clock update\n",
+				__func__);
+			goto ciu_out;
+		}
+	}
+
+#if IS_ENABLED(CONFIG_MMC_DW_IDMAC)
+	/* It is also recommended that we reset and reprogram idmac */
+	dw_mci_idmac_reset(host);
+#endif
+
+	ret = true;
+
+ciu_out:
+	/* After a CTRL reset we need to have CIU set clock registers  */
+	mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0);
+
+	return ret;
 }
 
 #ifdef CONFIG_OF
@@ -2238,6 +2283,9 @@ static struct dw_mci_of_quirks {
 	{
 		.quirk	= "broken-cd",
 		.id	= DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
+	}, {
+		.quirk	= "disable-wp",
+		.id	= DW_MCI_QUIRK_NO_WRITE_PROTECT,
 	},
 };
 
@@ -2425,7 +2473,7 @@ int dw_mci_probe(struct dw_mci *host)
 	}
 
 	/* Reset all blocks */
-	if (!dw_mci_ctrl_all_reset(host))
+	if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS))
 		return -ENODEV;
 
 	host->dma_ops = host->pdata->dma_ops;
@@ -2612,7 +2660,7 @@ int dw_mci_resume(struct dw_mci *host)
 		}
 	}
 
-	if (!dw_mci_ctrl_all_reset(host)) {
+	if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) {
 		ret = -ENODEV;
 		return ret;
 	}
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 738fa241d058..08fd956d81f3 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -129,6 +129,7 @@
 #define SDMMC_CMD_INDX(n)		((n) & 0x1F)
 /* Status register defines */
 #define SDMMC_GET_FCNT(x)		(((x)>>17) & 0x1FFF)
+#define SDMMC_STATUS_DMA_REQ		BIT(31)
 /* FIFOTH register defines */
 #define SDMMC_SET_FIFOTH(m, r, t)	(((m) & 0x7) << 28 | \
 					 ((r) & 0xFFF) << 16 | \
@@ -150,6 +151,10 @@
 /* Card read threshold */
 #define SDMMC_SET_RD_THLD(v, x)		(((v) & 0x1FFF) << 16 | (x))
 
+/* All ctrl reset bits */
+#define SDMMC_CTRL_ALL_RESET_FLAGS \
+	(SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | SDMMC_CTRL_DMA_RESET)
+
 /* Register access macros */
 #define mci_readl(dev, reg)			\
 	__raw_readl((dev)->regs + SDMMC_##reg)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 7ad463e9741c..e4d470704150 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -52,34 +52,53 @@ static unsigned int fmax = 515633;
  * struct variant_data - MMCI variant-specific quirks
  * @clkreg: default value for MCICLOCK register
  * @clkreg_enable: enable value for MMCICLOCK register
+ * @clkreg_8bit_bus_enable: enable value for 8 bit bus
+ * @clkreg_neg_edge_enable: enable value for inverted data/cmd output
  * @datalength_bits: number of bits in the MMCIDATALENGTH register
  * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY
  *	      is asserted (likewise for RX)
  * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY
  *		  is asserted (likewise for RX)
+ * @data_cmd_enable: enable value for data commands.
  * @sdio: variant supports SDIO
  * @st_clkdiv: true if using a ST-specific clock divider algorithm
+ * @datactrl_mask_ddrmode: ddr mode mask in datactrl register.
  * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
+ * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl
+ *		     register
  * @pwrreg_powerup: power up value for MMCIPOWER register
+ * @f_max: maximum clk frequency supported by the controller.
  * @signal_direction: input/out direction of bus signals can be indicated
  * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
  * @busy_detect: true if busy detection on dat0 is supported
  * @pwrreg_nopower: bits in MMCIPOWER don't controls ext. power supply
+ * @explicit_mclk_control: enable explicit mclk control in driver.
+ * @qcom_fifo: enables qcom specific fifo pio read logic.
+ * @reversed_irq_handling: handle data irq before cmd irq.
  */
 struct variant_data {
 	unsigned int		clkreg;
 	unsigned int		clkreg_enable;
+	unsigned int		clkreg_8bit_bus_enable;
+	unsigned int		clkreg_neg_edge_enable;
 	unsigned int		datalength_bits;
 	unsigned int		fifosize;
 	unsigned int		fifohalfsize;
+	unsigned int		data_cmd_enable;
+	unsigned int		datactrl_mask_ddrmode;
 	bool			sdio;
 	bool			st_clkdiv;
 	bool			blksz_datactrl16;
+	bool			blksz_datactrl4;
 	u32			pwrreg_powerup;
+	u32			f_max;
 	bool			signal_direction;
 	bool			pwrreg_clkgate;
 	bool			busy_detect;
 	bool			pwrreg_nopower;
+	bool			explicit_mclk_control;
+	bool			qcom_fifo;
+	bool			reversed_irq_handling;
 };
 
 static struct variant_data variant_arm = {
@@ -87,6 +106,8 @@ static struct variant_data variant_arm = {
 	.fifohalfsize		= 8 * 4,
 	.datalength_bits	= 16,
 	.pwrreg_powerup		= MCI_PWR_UP,
+	.f_max			= 100000000,
+	.reversed_irq_handling	= true,
 };
 
 static struct variant_data variant_arm_extended_fifo = {
@@ -94,6 +115,7 @@ static struct variant_data variant_arm_extended_fifo = {
 	.fifohalfsize		= 64 * 4,
 	.datalength_bits	= 16,
 	.pwrreg_powerup		= MCI_PWR_UP,
+	.f_max			= 100000000,
 };
 
 static struct variant_data variant_arm_extended_fifo_hwfc = {
@@ -102,15 +124,18 @@ static struct variant_data variant_arm_extended_fifo_hwfc = {
 	.clkreg_enable		= MCI_ARM_HWFCEN,
 	.datalength_bits	= 16,
 	.pwrreg_powerup		= MCI_PWR_UP,
+	.f_max			= 100000000,
 };
 
 static struct variant_data variant_u300 = {
 	.fifosize		= 16 * 4,
 	.fifohalfsize		= 8 * 4,
 	.clkreg_enable		= MCI_ST_U300_HWFCEN,
+	.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
 	.datalength_bits	= 16,
 	.sdio			= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
+	.f_max			= 100000000,
 	.signal_direction	= true,
 	.pwrreg_clkgate		= true,
 	.pwrreg_nopower		= true,
@@ -124,6 +149,7 @@ static struct variant_data variant_nomadik = {
 	.sdio			= true,
 	.st_clkdiv		= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
+	.f_max			= 100000000,
 	.signal_direction	= true,
 	.pwrreg_clkgate		= true,
 	.pwrreg_nopower		= true,
@@ -134,10 +160,13 @@ static struct variant_data variant_ux500 = {
 	.fifohalfsize		= 8 * 4,
 	.clkreg			= MCI_CLK_ENABLE,
 	.clkreg_enable		= MCI_ST_UX500_HWFCEN,
+	.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
+	.clkreg_neg_edge_enable	= MCI_ST_UX500_NEG_EDGE,
 	.datalength_bits	= 24,
 	.sdio			= true,
 	.st_clkdiv		= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
+	.f_max			= 100000000,
 	.signal_direction	= true,
 	.pwrreg_clkgate		= true,
 	.busy_detect		= true,
@@ -149,17 +178,38 @@ static struct variant_data variant_ux500v2 = {
 	.fifohalfsize		= 8 * 4,
 	.clkreg			= MCI_CLK_ENABLE,
 	.clkreg_enable		= MCI_ST_UX500_HWFCEN,
+	.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
+	.clkreg_neg_edge_enable	= MCI_ST_UX500_NEG_EDGE,
+	.datactrl_mask_ddrmode	= MCI_ST_DPSM_DDRMODE,
 	.datalength_bits	= 24,
 	.sdio			= true,
 	.st_clkdiv		= true,
 	.blksz_datactrl16	= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
+	.f_max			= 100000000,
 	.signal_direction	= true,
 	.pwrreg_clkgate		= true,
 	.busy_detect		= true,
 	.pwrreg_nopower		= true,
 };
 
+static struct variant_data variant_qcom = {
+	.fifosize		= 16 * 4,
+	.fifohalfsize		= 8 * 4,
+	.clkreg			= MCI_CLK_ENABLE,
+	.clkreg_enable		= MCI_QCOM_CLK_FLOWENA |
+				  MCI_QCOM_CLK_SELECT_IN_FBCLK,
+	.clkreg_8bit_bus_enable = MCI_QCOM_CLK_WIDEBUS_8,
+	.datactrl_mask_ddrmode	= MCI_QCOM_CLK_SELECT_IN_DDR_MODE,
+	.data_cmd_enable	= MCI_QCOM_CSPM_DATCMD,
+	.blksz_datactrl4	= true,
+	.datalength_bits	= 24,
+	.pwrreg_powerup		= MCI_PWR_UP,
+	.f_max			= 208000000,
+	.explicit_mclk_control	= true,
+	.qcom_fifo		= true,
+};
+
 static int mmci_card_busy(struct mmc_host *mmc)
 {
 	struct mmci_host *host = mmc_priv(mmc);
@@ -260,7 +310,9 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 	host->cclk = 0;
 
 	if (desired) {
-		if (desired >= host->mclk) {
+		if (variant->explicit_mclk_control) {
+			host->cclk = host->mclk;
+		} else if (desired >= host->mclk) {
 			clk = MCI_CLK_BYPASS;
 			if (variant->st_clkdiv)
 				clk |= MCI_ST_UX500_NEG_EDGE;
@@ -299,11 +351,11 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 	if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4)
 		clk |= MCI_4BIT_BUS;
 	if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8)
-		clk |= MCI_ST_8BIT_BUS;
+		clk |= variant->clkreg_8bit_bus_enable;
 
 	if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 ||
 	    host->mmc->ios.timing == MMC_TIMING_MMC_DDR52)
-		clk |= MCI_ST_UX500_NEG_EDGE;
+		clk |= variant->clkreg_neg_edge_enable;
 
 	mmci_write_clkreg(host, clk);
 }
@@ -719,7 +771,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 	data->bytes_xfered = 0;
 
 	clks = (unsigned long long)data->timeout_ns * host->cclk;
-	do_div(clks, 1000000000UL);
+	do_div(clks, NSEC_PER_SEC);
 
 	timeout = data->timeout_clks + (unsigned int)clks;
 
@@ -732,6 +784,8 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 
 	if (variant->blksz_datactrl16)
 		datactrl = MCI_DPSM_ENABLE | (data->blksz << 16);
+	else if (variant->blksz_datactrl4)
+		datactrl = MCI_DPSM_ENABLE | (data->blksz << 4);
 	else
 		datactrl = MCI_DPSM_ENABLE | blksz_bits << 4;
 
@@ -767,7 +821,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 
 	if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 ||
 	    host->mmc->ios.timing == MMC_TIMING_MMC_DDR52)
-		datactrl |= MCI_ST_DPSM_DDRMODE;
+		datactrl |= variant->datactrl_mask_ddrmode;
 
 	/*
 	 * Attempt to use DMA operation mode, if this
@@ -812,7 +866,7 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
 
 	if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) {
 		writel(0, base + MMCICOMMAND);
-		udelay(1);
+		mmci_reg_delay(host);
 	}
 
 	c |= cmd->opcode | MCI_CPSM_ENABLE;
@@ -824,6 +878,9 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
 	if (/*interrupt*/0)
 		c |= MCI_CPSM_INTERRUPT;
 
+	if (mmc_cmd_type(cmd) == MMC_CMD_ADTC)
+		c |= host->variant->data_cmd_enable;
+
 	host->cmd = cmd;
 
 	writel(cmd->arg, base + MMCIARGUMENT);
@@ -834,6 +891,10 @@ static void
 mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 	      unsigned int status)
 {
+	/* Make sure we have data to handle */
+	if (!data)
+		return;
+
 	/* First check for errors */
 	if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR|
 		      MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
@@ -902,9 +963,17 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
 	     unsigned int status)
 {
 	void __iomem *base = host->base;
-	bool sbc = (cmd == host->mrq->sbc);
-	bool busy_resp = host->variant->busy_detect &&
-			(cmd->flags & MMC_RSP_BUSY);
+	bool sbc, busy_resp;
+
+	if (!cmd)
+		return;
+
+	sbc = (cmd == host->mrq->sbc);
+	busy_resp = host->variant->busy_detect && (cmd->flags & MMC_RSP_BUSY);
+
+	if (!((status|host->busy_status) & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|
+		MCI_CMDSENT|MCI_CMDRESPEND)))
+		return;
 
 	/* Check if we need to wait for busy completion. */
 	if (host->busy_status && (status & MCI_ST_CARDBUSY))
@@ -957,15 +1026,34 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
 	}
 }
 
+static int mmci_get_rx_fifocnt(struct mmci_host *host, u32 status, int remain)
+{
+	return remain - (readl(host->base + MMCIFIFOCNT) << 2);
+}
+
+static int mmci_qcom_get_rx_fifocnt(struct mmci_host *host, u32 status, int r)
+{
+	/*
+	 * on qcom SDCC4 only 8 words are used in each burst so only 8 addresses
+	 * from the fifo range should be used
+	 */
+	if (status & MCI_RXFIFOHALFFULL)
+		return host->variant->fifohalfsize;
+	else if (status & MCI_RXDATAAVLBL)
+		return 4;
+
+	return 0;
+}
+
 static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int remain)
 {
 	void __iomem *base = host->base;
 	char *ptr = buffer;
-	u32 status;
+	u32 status = readl(host->base + MMCISTATUS);
 	int host_remain = host->size;
 
 	do {
-		int count = host_remain - (readl(base + MMCIFIFOCNT) << 2);
+		int count = host->get_rx_fifocnt(host, status, host_remain);
 
 		if (count > remain)
 			count = remain;
@@ -1132,9 +1220,6 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
 	spin_lock(&host->lock);
 
 	do {
-		struct mmc_command *cmd;
-		struct mmc_data *data;
-
 		status = readl(host->base + MMCISTATUS);
 
 		if (host->singleirq) {
@@ -1154,16 +1239,13 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
 
 		dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
 
-		cmd = host->cmd;
-		if ((status|host->busy_status) & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|
-			MCI_CMDSENT|MCI_CMDRESPEND) && cmd)
-			mmci_cmd_irq(host, cmd, status);
-
-		data = host->data;
-		if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR|
-			      MCI_TXUNDERRUN|MCI_RXOVERRUN|MCI_DATAEND|
-			      MCI_DATABLOCKEND) && data)
-			mmci_data_irq(host, data, status);
+		if (host->variant->reversed_irq_handling) {
+			mmci_data_irq(host, host->data, status);
+			mmci_cmd_irq(host, host->cmd, status);
+		} else {
+			mmci_cmd_irq(host, host->cmd, status);
+			mmci_data_irq(host, host->data, status);
+		}
 
 		/* Don't poll for busy completion in irq context. */
 		if (host->busy_status)
@@ -1296,6 +1378,17 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (!ios->clock && variant->pwrreg_clkgate)
 		pwr &= ~MCI_PWR_ON;
 
+	if (host->variant->explicit_mclk_control &&
+	    ios->clock != host->clock_cache) {
+		ret = clk_set_rate(host->clk, ios->clock);
+		if (ret < 0)
+			dev_err(mmc_dev(host->mmc),
+				"Error setting clock rate (%d)\n", ret);
+		else
+			host->mclk = clk_get_rate(host->clk);
+	}
+	host->clock_cache = ios->clock;
+
 	spin_lock_irqsave(&host->lock, flags);
 
 	mmci_set_clkreg(host, ios->clock);
@@ -1443,6 +1536,11 @@ static int mmci_probe(struct amba_device *dev,
 	if (ret)
 		goto host_free;
 
+	if (variant->qcom_fifo)
+		host->get_rx_fifocnt = mmci_qcom_get_rx_fifocnt;<