diff options
author | Vinod Koul <vinod.koul@intel.com> | 2017-07-04 10:05:10 +0530 |
---|---|---|
committer | Vinod Koul <vinod.koul@intel.com> | 2017-07-04 10:05:10 +0530 |
commit | 98cd085ebb20acd3cb6304cd5bf4ef805efbbb87 (patch) | |
tree | e0fab0594c549677b6d0b912db5f9eac183b4240 /drivers | |
parent | 70ef9af76590c970c23f99561c89ec614b0d26aa (diff) | |
parent | fcc785417fba2dc81d2f6ba888caaff463f4f441 (diff) |
Merge branch 'topic/pl08x' into for-linus
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/dma/Kconfig | 6 | ||||
-rw-r--r-- | drivers/dma/amba-pl08x.c | 970 |
2 files changed, 759 insertions, 217 deletions
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index c022cc68b025..fa8f9c07ce73 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -62,8 +62,10 @@ config AMBA_PL08X select DMA_ENGINE select DMA_VIRTUAL_CHANNELS help - Platform has a PL08x DMAC device - which can provide DMA engine support + Say yes if your platform has a PL08x DMAC device which can + provide DMA engine support. This includes the original ARM + PL080 and PL081, Samsungs PL080 derivative and Faraday + Technology's FTDMAC020 PL080 derivative. config AMCC_PPC440SPE_ADMA tristate "AMCC PPC440SPe ADMA support" diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 6bb8813ca275..13cc95c0474c 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1,9 +1,10 @@ /* * Copyright (c) 2006 ARM Ltd. * Copyright (c) 2010 ST-Ericsson SA + * Copyirght (c) 2017 Linaro Ltd. * * Author: Peter Pearse <peter.pearse@arm.com> - * Author: Linus Walleij <linus.walleij@stericsson.com> + * Author: Linus Walleij <linus.walleij@linaro.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -110,11 +111,12 @@ struct pl08x_driver_data; * @channels: the number of channels available in this variant * @signals: the number of request signals available from the hardware * @dualmaster: whether this version supports dual AHB masters or not. - * @nomadik: whether the channels have Nomadik security extension bits - * that need to be checked for permission before use and some registers are - * missing - * @pl080s: whether this version is a PL080S, which has separate register and - * LLI word for transfer size. + * @nomadik: whether this variant is a ST Microelectronics Nomadik, where the + * channels have Nomadik security extension bits that need to be checked + * for permission before use and some registers are missing + * @pl080s: whether this variant is a Samsung PL080S, which has separate + * register and LLI word for transfer size. + * @ftdmac020: whether this variant is a Faraday Technology FTDMAC020 * @max_transfer_size: the maximum single element transfer size for this * PL08x variant. */ @@ -125,6 +127,7 @@ struct vendor_data { bool dualmaster; bool nomadik; bool pl080s; + bool ftdmac020; u32 max_transfer_size; }; @@ -148,19 +151,34 @@ struct pl08x_bus_data { * @id: physical index to this channel * @base: memory base address for this physical channel * @reg_config: configuration address for this physical channel + * @reg_control: control address for this physical channel + * @reg_src: transfer source address register + * @reg_dst: transfer destination address register + * @reg_lli: transfer LLI address register + * @reg_busy: if the variant has a special per-channel busy register, + * this contains a pointer to it * @lock: a lock to use when altering an instance of this struct * @serving: the virtual channel currently being served by this physical * channel * @locked: channel unavailable for the system, e.g. dedicated to secure * world + * @ftdmac020: channel is on a FTDMAC020 + * @pl080s: channel is on a PL08s */ struct pl08x_phy_chan { unsigned int id; void __iomem *base; void __iomem *reg_config; + void __iomem *reg_control; + void __iomem *reg_src; + void __iomem *reg_dst; + void __iomem *reg_lli; + void __iomem *reg_busy; spinlock_t lock; struct pl08x_dma_chan *serving; bool locked; + bool ftdmac020; + bool pl080s; }; /** @@ -253,8 +271,9 @@ struct pl08x_dma_chan { /** * struct pl08x_driver_data - the local state holder for the PL08x - * @slave: slave engine for this instance + * @slave: optional slave engine for this instance * @memcpy: memcpy engine for this instance + * @has_slave: the PL08x has a slave engine (routed signals) * @base: virtual memory base (remapped) for the PL08x * @adev: the corresponding AMBA (PrimeCell) bus entry * @vd: vendor data for this PL08x variant @@ -269,6 +288,7 @@ struct pl08x_dma_chan { struct pl08x_driver_data { struct dma_device slave; struct dma_device memcpy; + bool has_slave; void __iomem *base; struct amba_device *adev; const struct vendor_data *vd; @@ -360,10 +380,24 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) { unsigned int val; + /* If we have a special busy register, take a shortcut */ + if (ch->reg_busy) { + val = readl(ch->reg_busy); + return !!(val & BIT(ch->id)); + } val = readl(ch->reg_config); return val & PL080_CONFIG_ACTIVE; } +/* + * pl08x_write_lli() - Write an LLI into the DMA controller. + * + * The PL08x derivatives support linked lists, but the first item of the + * list containing the source, destination, control word and next LLI is + * ignored. Instead the driver has to write those values directly into the + * SRC, DST, LLI and control registers. On FTDMAC020 also the SIZE + * register need to be set up for the first transfer. + */ static void pl08x_write_lli(struct pl08x_driver_data *pl08x, struct pl08x_phy_chan *phychan, const u32 *lli, u32 ccfg) { @@ -381,11 +415,112 @@ static void pl08x_write_lli(struct pl08x_driver_data *pl08x, phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST], lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg); - writel_relaxed(lli[PL080_LLI_SRC], phychan->base + PL080_CH_SRC_ADDR); - writel_relaxed(lli[PL080_LLI_DST], phychan->base + PL080_CH_DST_ADDR); - writel_relaxed(lli[PL080_LLI_LLI], phychan->base + PL080_CH_LLI); - writel_relaxed(lli[PL080_LLI_CCTL], phychan->base + PL080_CH_CONTROL); + writel_relaxed(lli[PL080_LLI_SRC], phychan->reg_src); + writel_relaxed(lli[PL080_LLI_DST], phychan->reg_dst); + writel_relaxed(lli[PL080_LLI_LLI], phychan->reg_lli); + + /* + * The FTMAC020 has a different layout in the CCTL word of the LLI + * and the CCTL register which is split in CSR and SIZE registers. + * Convert the LLI item CCTL into the proper values to write into + * the CSR and SIZE registers. + */ + if (phychan->ftdmac020) { + u32 llictl = lli[PL080_LLI_CCTL]; + u32 val = 0; + + /* Write the transfer size (12 bits) to the size register */ + writel_relaxed(llictl & FTDMAC020_LLI_TRANSFER_SIZE_MASK, + phychan->base + FTDMAC020_CH_SIZE); + /* + * Then write the control bits 28..16 to the control register + * by shuffleing the bits around to where they are in the + * main register. The mapping is as follows: + * Bit 28: TC_MSK - mask on all except last LLI + * Bit 27..25: SRC_WIDTH + * Bit 24..22: DST_WIDTH + * Bit 21..20: SRCAD_CTRL + * Bit 19..17: DSTAD_CTRL + * Bit 17: SRC_SEL + * Bit 16: DST_SEL + */ + if (llictl & FTDMAC020_LLI_TC_MSK) + val |= FTDMAC020_CH_CSR_TC_MSK; + val |= ((llictl & FTDMAC020_LLI_SRC_WIDTH_MSK) >> + (FTDMAC020_LLI_SRC_WIDTH_SHIFT - + FTDMAC020_CH_CSR_SRC_WIDTH_SHIFT)); + val |= ((llictl & FTDMAC020_LLI_DST_WIDTH_MSK) >> + (FTDMAC020_LLI_DST_WIDTH_SHIFT - + FTDMAC020_CH_CSR_DST_WIDTH_SHIFT)); + val |= ((llictl & FTDMAC020_LLI_SRCAD_CTL_MSK) >> + (FTDMAC020_LLI_SRCAD_CTL_SHIFT - + FTDMAC020_CH_CSR_SRCAD_CTL_SHIFT)); + val |= ((llictl & FTDMAC020_LLI_DSTAD_CTL_MSK) >> + (FTDMAC020_LLI_DSTAD_CTL_SHIFT - + FTDMAC020_CH_CSR_DSTAD_CTL_SHIFT)); + if (llictl & FTDMAC020_LLI_SRC_SEL) + val |= FTDMAC020_CH_CSR_SRC_SEL; + if (llictl & FTDMAC020_LLI_DST_SEL) + val |= FTDMAC020_CH_CSR_DST_SEL; + + /* + * Set up the bits that exist in the CSR but are not + * part the LLI, i.e. only gets written to the control + * register right here. + * + * FIXME: do not just handle memcpy, also handle slave DMA. + */ + switch (pl08x->pd->memcpy_burst_size) { + default: + case PL08X_BURST_SZ_1: + val |= PL080_BSIZE_1 << + FTDMAC020_CH_CSR_SRC_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_4: + val |= PL080_BSIZE_4 << + FTDMAC020_CH_CSR_SRC_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_8: + val |= PL080_BSIZE_8 << + FTDMAC020_CH_CSR_SRC_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_16: + val |= PL080_BSIZE_16 << + FTDMAC020_CH_CSR_SRC_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_32: + val |= PL080_BSIZE_32 << + FTDMAC020_CH_CSR_SRC_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_64: + val |= PL080_BSIZE_64 << + FTDMAC020_CH_CSR_SRC_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_128: + val |= PL080_BSIZE_128 << + FTDMAC020_CH_CSR_SRC_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_256: + val |= PL080_BSIZE_256 << + FTDMAC020_CH_CSR_SRC_SIZE_SHIFT; + break; + } + + /* Protection flags */ + if (pl08x->pd->memcpy_prot_buff) + val |= FTDMAC020_CH_CSR_PROT2; + if (pl08x->pd->memcpy_prot_cache) + val |= FTDMAC020_CH_CSR_PROT3; + /* We are the kernel, so we are in privileged mode */ + val |= FTDMAC020_CH_CSR_PROT1; + + writel_relaxed(val, phychan->reg_control); + } else { + /* Bits are just identical */ + writel_relaxed(lli[PL080_LLI_CCTL], phychan->reg_control); + } + /* Second control word on the PL080s */ if (pl08x->vd->pl080s) writel_relaxed(lli[PL080S_LLI_CCTL2], phychan->base + PL080S_CH_CONTROL2); @@ -423,11 +558,25 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan) cpu_relax(); /* Do not access config register until channel shows as inactive */ - val = readl(phychan->reg_config); - while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE)) + if (phychan->ftdmac020) { + val = readl(phychan->reg_config); + while (val & FTDMAC020_CH_CFG_BUSY) + val = readl(phychan->reg_config); + + val = readl(phychan->reg_control); + while (val & FTDMAC020_CH_CSR_EN) + val = readl(phychan->reg_control); + + writel(val | FTDMAC020_CH_CSR_EN, + phychan->reg_control); + } else { val = readl(phychan->reg_config); + while ((val & PL080_CONFIG_ACTIVE) || + (val & PL080_CONFIG_ENABLE)) + val = readl(phychan->reg_config); - writel(val | PL080_CONFIG_ENABLE, phychan->reg_config); + writel(val | PL080_CONFIG_ENABLE, phychan->reg_config); + } } /* @@ -445,6 +594,14 @@ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch) u32 val; int timeout; + if (ch->ftdmac020) { + /* Use the enable bit on the FTDMAC020 */ + val = readl(ch->reg_control); + val &= ~FTDMAC020_CH_CSR_EN; + writel(val, ch->reg_control); + return; + } + /* Set the HALT bit and wait for the FIFO to drain */ val = readl(ch->reg_config); val |= PL080_CONFIG_HALT; @@ -464,6 +621,14 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) { u32 val; + /* Use the enable bit on the FTDMAC020 */ + if (ch->ftdmac020) { + val = readl(ch->reg_control); + val |= FTDMAC020_CH_CSR_EN; + writel(val, ch->reg_control); + return; + } + /* Clear the HALT bit */ val = readl(ch->reg_config); val &= ~PL080_CONFIG_HALT; @@ -479,25 +644,68 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x, struct pl08x_phy_chan *ch) { - u32 val = readl(ch->reg_config); + u32 val; + /* The layout for the FTDMAC020 is different */ + if (ch->ftdmac020) { + /* Disable all interrupts */ + val = readl(ch->reg_config); + val |= (FTDMAC020_CH_CFG_INT_ABT_MASK | + FTDMAC020_CH_CFG_INT_ERR_MASK | + FTDMAC020_CH_CFG_INT_TC_MASK); + writel(val, ch->reg_config); + + /* Abort and disable channel */ + val = readl(ch->reg_control); + val &= ~FTDMAC020_CH_CSR_EN; + val |= FTDMAC020_CH_CSR_ABT; + writel(val, ch->reg_control); + + /* Clear ABT and ERR interrupt flags */ + writel(BIT(ch->id) | BIT(ch->id + 16), + pl08x->base + PL080_ERR_CLEAR); + writel(BIT(ch->id), pl08x->base + PL080_TC_CLEAR); + + return; + } + + val = readl(ch->reg_config); val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK | PL080_CONFIG_TC_IRQ_MASK); - writel(val, ch->reg_config); writel(BIT(ch->id), pl08x->base + PL080_ERR_CLEAR); writel(BIT(ch->id), pl08x->base + PL080_TC_CLEAR); } -static inline u32 get_bytes_in_cctl(u32 cctl) +static u32 get_bytes_in_phy_channel(struct pl08x_phy_chan *ch) { - /* The source width defines the number of bytes */ - u32 bytes = cctl & PL080_CONTROL_TRANSFER_SIZE_MASK; + u32 val; + u32 bytes; + + if (ch->ftdmac020) { + bytes = readl(ch->base + FTDMAC020_CH_SIZE); - cctl &= PL080_CONTROL_SWIDTH_MASK; + val = readl(ch->reg_control); + val &= FTDMAC020_CH_CSR_SRC_WIDTH_MSK; + val >>= FTDMAC020_CH_CSR_SRC_WIDTH_SHIFT; + } else if (ch->pl080s) { + val = readl(ch->base + PL080S_CH_CONTROL2); + bytes = val & PL080S_CONTROL_TRANSFER_SIZE_MASK; - switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) { + val = readl(ch->reg_control); + val &= PL080_CONTROL_SWIDTH_MASK; + val >>= PL080_CONTROL_SWIDTH_SHIFT; + } else { + /* Plain PL08x */ + val = readl(ch->reg_control); + bytes = val & PL080_CONTROL_TRANSFER_SIZE_MASK; + + val &= PL080_CONTROL_SWIDTH_MASK; + val >>= PL080_CONTROL_SWIDTH_SHIFT; + } + + switch (val) { case PL080_WIDTH_8BIT: break; case PL080_WIDTH_16BIT: @@ -510,14 +718,35 @@ static inline u32 get_bytes_in_cctl(u32 cctl) return bytes; } -static inline u32 get_bytes_in_cctl_pl080s(u32 cctl, u32 cctl1) +static u32 get_bytes_in_lli(struct pl08x_phy_chan *ch, const u32 *llis_va) { - /* The source width defines the number of bytes */ - u32 bytes = cctl1 & PL080S_CONTROL_TRANSFER_SIZE_MASK; + u32 val; + u32 bytes; + + if (ch->ftdmac020) { + val = llis_va[PL080_LLI_CCTL]; + bytes = val & FTDMAC020_LLI_TRANSFER_SIZE_MASK; + + val = llis_va[PL080_LLI_CCTL]; + val &= FTDMAC020_LLI_SRC_WIDTH_MSK; + val >>= FTDMAC020_LLI_SRC_WIDTH_SHIFT; + } else if (ch->pl080s) { + val = llis_va[PL080S_LLI_CCTL2]; + bytes = val & PL080S_CONTROL_TRANSFER_SIZE_MASK; + + val = llis_va[PL080_LLI_CCTL]; + val &= PL080_CONTROL_SWIDTH_MASK; + val >>= PL080_CONTROL_SWIDTH_SHIFT; + } else { + /* Plain PL08x */ + val = llis_va[PL080_LLI_CCTL]; + bytes = val & PL080_CONTROL_TRANSFER_SIZE_MASK; - cctl &= PL080_CONTROL_SWIDTH_MASK; + val &= PL080_CONTROL_SWIDTH_MASK; + val >>= PL080_CONTROL_SWIDTH_SHIFT; + } - switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) { + switch (val) { case PL080_WIDTH_8BIT: break; case PL080_WIDTH_16BIT: @@ -552,15 +781,10 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) * Follow the LLIs to get the number of remaining * bytes in the currently active transaction. */ - clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2; + clli = readl(ch->reg_lli) & ~PL080_LLI_LM_AHB2; /* First get the remaining bytes in the active transfer */ - if (pl08x->vd->pl080s) - bytes = get_bytes_in_cctl_pl080s( - readl(ch->base + PL080_CH_CONTROL), - readl(ch->base + PL080S_CH_CONTROL2)); - else - bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL)); + bytes = get_bytes_in_phy_channel(ch); if (!clli) return bytes; @@ -581,12 +805,7 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) llis_va_limit = llis_va + llis_max_words; for (; llis_va < llis_va_limit; llis_va += pl08x->lli_words) { - if (pl08x->vd->pl080s) - bytes += get_bytes_in_cctl_pl080s( - llis_va[PL080_LLI_CCTL], - llis_va[PL080S_LLI_CCTL2]); - else - bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]); + bytes += get_bytes_in_lli(ch, llis_va); /* * A LLI pointer going backward terminates the LLI list @@ -705,7 +924,7 @@ static void pl08x_phy_free(struct pl08x_dma_chan *plchan) break; } - if (!next) { + if (!next && pl08x->has_slave) { list_for_each_entry(p, &pl08x->slave.channels, vc.chan.device_node) if (p->state == PL08X_CHAN_WAITING) { next = p; @@ -746,9 +965,30 @@ static void pl08x_phy_free(struct pl08x_dma_chan *plchan) * LLI handling */ -static inline unsigned int pl08x_get_bytes_for_cctl(unsigned int coded) +static inline unsigned int +pl08x_get_bytes_for_lli(struct pl08x_driver_data *pl08x, + u32 cctl, + bool source) { - switch (coded) { + u32 val; + + if (pl08x->vd->ftdmac020) { + if (source) + val = (cctl & FTDMAC020_LLI_SRC_WIDTH_MSK) >> + FTDMAC020_LLI_SRC_WIDTH_SHIFT; + else + val = (cctl & FTDMAC020_LLI_DST_WIDTH_MSK) >> + FTDMAC020_LLI_DST_WIDTH_SHIFT; + } else { + if (source) + val = (cctl & PL080_CONTROL_SWIDTH_MASK) >> + PL080_CONTROL_SWIDTH_SHIFT; + else + val = (cctl & PL080_CONTROL_DWIDTH_MASK) >> + PL080_CONTROL_DWIDTH_SHIFT; + } + + switch (val) { case PL080_WIDTH_8BIT: return 1; case PL080_WIDTH_16BIT: @@ -762,49 +1002,106 @@ static inline unsigned int pl08x_get_bytes_for_cctl(unsigned int coded) return 0; } -static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth, - size_t tsize) +static inline u32 pl08x_lli_control_bits(struct pl08x_driver_data *pl08x, + u32 cctl, + u8 srcwidth, u8 dstwidth, + size_t tsize) { u32 retbits = cctl; - /* Remove all src, dst and transfer size bits */ - retbits &= ~PL080_CONTROL_DWIDTH_MASK; - retbits &= ~PL080_CONTROL_SWIDTH_MASK; - retbits &= ~PL080_CONTROL_TRANSFER_SIZE_MASK; + /* + * Remove all src, dst and transfer size bits, then set the + * width and size according to the parameters. The bit offsets + * are different in the FTDMAC020 so we need to accound for this. + */ + if (pl08x->vd->ftdmac020) { + retbits &= ~FTDMAC020_LLI_DST_WIDTH_MSK; + retbits &= ~FTDMAC020_LLI_SRC_WIDTH_MSK; + retbits &= ~FTDMAC020_LLI_TRANSFER_SIZE_MASK; + + switch (srcwidth) { + case 1: + retbits |= PL080_WIDTH_8BIT << + FTDMAC020_LLI_SRC_WIDTH_SHIFT; + break; + case 2: + retbits |= PL080_WIDTH_16BIT << + FTDMAC020_LLI_SRC_WIDTH_SHIFT; + break; + case 4: + retbits |= PL080_WIDTH_32BIT << + FTDMAC020_LLI_SRC_WIDTH_SHIFT; + break; + default: + BUG(); + break; + } - /* Then set the bits according to the parameters */ - switch (srcwidth) { - case 1: - retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT; - break; - case 2: - retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT; - break; - case 4: - retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT; - break; - default: - BUG(); - break; - } + switch (dstwidth) { + case 1: + retbits |= PL080_WIDTH_8BIT << + FTDMAC020_LLI_DST_WIDTH_SHIFT; + break; + case 2: + retbits |= PL080_WIDTH_16BIT << + FTDMAC020_LLI_DST_WIDTH_SHIFT; + break; + case 4: + retbits |= PL080_WIDTH_32BIT << + FTDMAC020_LLI_DST_WIDTH_SHIFT; + break; + default: + BUG(); + break; + } - switch (dstwidth) { - case 1: - retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT; - break; - case 2: - retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT; - break; - case 4: - retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT; - break; - default: - BUG(); - break; + tsize &= FTDMAC020_LLI_TRANSFER_SIZE_MASK; + retbits |= tsize << FTDMAC020_LLI_TRANSFER_SIZE_SHIFT; + } else { + retbits &= ~PL080_CONTROL_DWIDTH_MASK; + retbits &= ~PL080_CONTROL_SWIDTH_MASK; + retbits &= ~PL080_CONTROL_TRANSFER_SIZE_MASK; + + switch (srcwidth) { + case 1: + retbits |= PL080_WIDTH_8BIT << + PL080_CONTROL_SWIDTH_SHIFT; + break; + case 2: + retbits |= PL080_WIDTH_16BIT << + PL080_CONTROL_SWIDTH_SHIFT; + break; + case 4: + retbits |= PL080_WIDTH_32BIT << + PL080_CONTROL_SWIDTH_SHIFT; + break; + default: + BUG(); + break; + } + + switch (dstwidth) { + case 1: + retbits |= PL080_WIDTH_8BIT << + PL080_CONTROL_DWIDTH_SHIFT; + break; + case 2: + retbits |= PL080_WIDTH_16BIT << + PL080_CONTROL_DWIDTH_SHIFT; + break; + case 4: + retbits |= PL080_WIDTH_32BIT << + PL080_CONTROL_DWIDTH_SHIFT; + break; + default: + BUG(); + break; + } + + tsize &= PL080_CONTROL_TRANSFER_SIZE_MASK; + retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT; } - tsize &= PL080_CONTROL_TRANSFER_SIZE_MASK; - retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT; return retbits; } @@ -825,13 +1122,35 @@ struct pl08x_lli_build_data { * - prefers the destination bus if both available * - prefers bus with fixed address (i.e. peripheral) */ -static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, - struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl) +static void pl08x_choose_master_bus(struct pl08x_driver_data *pl08x, + struct pl08x_lli_build_data *bd, + struct pl08x_bus_data **mbus, + struct pl08x_bus_data **sbus, + u32 cctl) { - if (!(cctl & PL080_CONTROL_DST_INCR)) { + bool dst_incr; + bool src_incr; + + /* + * The FTDMAC020 only supports memory-to-memory transfer, so + * source and destination always increase. + */ + if (pl08x->vd->ftdmac020) { + dst_incr = true; + src_incr = true; + } else { + dst_incr = !!(cctl & PL080_CONTROL_DST_INCR); + src_incr = !!(cctl & PL080_CONTROL_SRC_INCR); + } + + /* + * If either bus is not advancing, i.e. it is a peripheral, that + * one becomes master + */ + if (!dst_incr) { *mbus = &bd->dstbus; *sbus = &bd->srcbus; - } else if (!(cctl & PL080_CONTROL_SRC_INCR)) { + } else if (!src_incr) { *mbus = &bd->srcbus; *sbus = &bd->dstbus; } else { @@ -869,10 +1188,16 @@ static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, if (pl08x->vd->pl080s) llis_va[PL080S_LLI_CCTL2] = cctl2; - if (cctl & PL080_CONTROL_SRC_INCR) + if (pl08x->vd->ftdmac020) { + /* FIXME: only memcpy so far so both increase */ bd->srcbus.addr += len; - if (cctl & PL080_CONTROL_DST_INCR) bd->dstbus.addr += len; + } else { + if (cctl & PL080_CONTROL_SRC_INCR) + bd->srcbus.addr += len; + if (cctl & PL080_CONTROL_DST_INCR) + bd->dstbus.addr += len; + } BUG_ON(bd->remainder < len); @@ -883,12 +1208,12 @@ static inline void prep_byte_width_lli(struct pl08x_driver_data *pl08x, struct pl08x_lli_build_data *bd, u32 *cctl, u32 len, int num_llis, size_t *total_bytes) { - *cctl = pl08x_cctl_bits(*cctl, 1, 1, len); + *cctl = pl08x_lli_control_bits(pl08x, *cctl, 1, 1, len); pl08x_fill_lli_for_desc(pl08x, bd, num_llis, len, *cctl, len); (*total_bytes) += len; } -#ifdef VERBOSE_DEBUG +#if 1 static void pl08x_dump_lli(struct pl08x_driver_data *pl08x, const u32 *llis_va, int num_llis) { @@ -953,14 +1278,10 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, cctl = txd->cctl; /* Find maximum width of the source bus */ - bd.srcbus.maxwidth = - pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >> - PL080_CONTROL_SWIDTH_SHIFT); + bd.srcbus.maxwidth = pl08x_get_bytes_for_lli(pl08x, cctl, true); /* Find maximum width of the destination bus */ - bd.dstbus.maxwidth = - pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >> - PL080_CONTROL_DWIDTH_SHIFT); + bd.dstbus.maxwidth = pl08x_get_bytes_for_lli(pl08x, cctl, false); list_for_each_entry(dsg, &txd->dsg_list, node) { total_bytes = 0; @@ -972,7 +1293,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, bd.srcbus.buswidth = bd.srcbus.maxwidth; bd.dstbus.buswidth = bd.dstbus.maxwidth; - pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); + pl08x_choose_master_bus(pl08x, &bd, &mbus, &sbus, cctl); dev_vdbg(&pl08x->adev->dev, "src=0x%08llx%s/%u dst=0x%08llx%s/%u len=%zu\n", @@ -1009,8 +1330,14 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * supported. Thus, we can't have scattered addresses. */ if (!bd.remainder) { - u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >> - PL080_CONFIG_FLOW_CONTROL_SHIFT; + u32 fc; + + /* FTDMAC020 only does memory-to-memory */ + if (pl08x->vd->ftdmac020) + fc = PL080_FLOW_MEM2MEM; + else + fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >> + PL080_CONFIG_FLOW_CONTROL_SHIFT; if (!((fc >= PL080_FLOW_SRC2DST_DST) && (fc <= PL080_FLOW_SRC2DST_SRC))) { dev_err(&pl08x->adev->dev, "%s sg len can't be zero", @@ -1027,8 +1354,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, return 0; } - cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, - bd.dstbus.buswidth, 0); + cctl = pl08x_lli_control_bits(pl08x, cctl, + bd.srcbus.buswidth, bd.dstbus.buswidth, + 0); pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++, 0, cctl, 0); break; @@ -1107,8 +1435,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, "size 0x%08zx (remainder 0x%08zx)\n", __func__, lli_len, bd.remainder); - cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, - bd.dstbus.buswidth, tsize); + cctl = pl08x_lli_control_bits(pl08x, cctl, + bd.srcbus.buswidth, bd.dstbus.buswidth, + tsize); pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++, lli_len, cctl, tsize); total_bytes += lli_len; @@ -1151,7 +1480,10 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* The final LLI terminates the LLI. */ last_lli[PL080_LLI_LLI] = 0; /* The final LLI element shall also fire an interrupt. */ - last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN; + if (pl08x->vd->ftdmac020) + last_lli[PL080_LLI_CCTL] &= ~FTDMAC020_LLI_TC_MSK; + else + last_lli[PL080_LLI_CCTL] |= PL080_CONTROL_TC_IRQ_EN; } pl08x_dump_lli(pl08x, llis_va, num_llis); @@ -1317,14 +1649,25 @@ static const struct burst_table burst_sizes[] = { * will be routed to each port. We try to have source and destination * on separate ports, but always respect the allowable settings. */ -static u32 pl08x_select_bus(u8 src, u8 dst) +static u32 pl08x_select_bus(bool ftdmac020, u8 src, u8 dst) { u32 cctl = 0; + u32 dst_ahb2; + u32 src_ahb2; + + /* The FTDMAC020 use different bits to indicate src/dst bus */ + if (ftdmac020) { + dst_ahb2 = FTDMAC020_LLI_DST_SEL; + src_ahb2 = FTDMAC020_LLI_SRC_SEL; + } else { + dst_ahb2 = PL080_CONTROL_DST_AHB2; + src_ahb2 = PL080_CONTROL_SRC_AHB2; + } if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1))) - cctl |= PL080_CONTROL_DST_AHB2; + cctl |= dst_ahb2; if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2))) - cctl |= PL080_CONTROL_SRC_AHB2; + cctl |= src_ahb2; return cctl; } @@ -1412,14 +1755,134 @@ static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) { struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT); - if (txd) { + if (txd) INIT_LIST_HEAD(&txd->dsg_list); + return txd; +} - /* Always enable error and terminal interrupts */ - txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK | - PL080_CONFIG_TC_IRQ_MASK; +static u32 pl08x_memcpy_cctl(struct pl08x_driver_data *pl08x) +{ + u32 cctl = 0; + + /* Conjure cctl */ + switch (pl08x->pd->memcpy_burst_size) { + default: + dev_err(&pl08x->adev->dev, + "illegal burst size for memcpy, set to 1\n"); + /* Fall through */ + case PL08X_BURST_SZ_1: + cctl |= PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_4: + cctl |= PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_8: + cctl |= PL080_BSIZE_8 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_8 << PL080_CONTROL_DB_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_16: + cctl |= PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_32: + cctl |= PL080_BSIZE_32 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_32 << PL080_CONTROL_DB_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_64: + cctl |= PL080_BSIZE_64 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_64 << PL080_CONTROL_DB_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_128: + cctl |= PL080_BSIZE_128 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_128 << PL080_CONTROL_DB_SIZE_SHIFT; + break; + case PL08X_BURST_SZ_256: + cctl |= PL080_BSIZE_256 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_256 << PL080_CONTROL_DB_SIZE_SHIFT; + break; } - return txd; + + switch (pl08x->pd->memcpy_bus_width) { + default: + dev_err(&pl08x->adev->dev, + "illegal bus width for memcpy, set to 8 bits\n"); + /* Fall through */ + case PL08X_BUS_WIDTH_8_BITS: + cctl |= PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT | + PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT; + break; + case PL08X_BUS_WIDTH_16_BITS: + cctl |= PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT | + PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT; + break; + case PL08X_BUS_WIDTH_32_BITS: + cctl |= PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT; + break; + } + + /* Protection flags */ + if (pl08x->pd->memcpy_prot_buff) + cctl |= PL080_CONTROL_PROT_BUFF; + if (pl08x->pd->memcpy_prot_cache) + cctl |= PL080_CONTROL_PROT_CACHE; + + /* We are the kernel, so we are in privileged mode */ + cctl |= PL080_CONTROL_PROT_SYS; + + /* Both to be incremented or the code will break */ + cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; + + if (pl08x->vd->dualmaster) + cctl |= pl08x_select_bus(false, + pl08x->mem_buses, + pl08x->mem_buses); + + return cctl; +} + +static u32 pl08x_ftdmac020_memcpy_cctl(struct pl08x_driver_data *pl08x) +{ + u32 cctl = 0; + + /* Conjure cctl */ + switch (pl08x->pd->memcpy_bus_width) { + default: + dev_err(&pl08x->adev->dev, + "illegal bus width for memcpy, set to 8 bits\n"); + /* Fall through */ + case PL08X_BUS_WIDTH_8_BITS: + cctl |= PL080_WIDTH_8BIT << FTDMAC020_LLI_SRC_WIDTH_SHIFT | + PL080_WIDTH_8BIT << FTDMAC020_LLI_DST_WIDTH_SHIFT; + break; + case PL08X_BUS_WIDTH_16_BITS: + cctl |= PL080_WIDTH_16BIT << FTDMAC020_LLI_SRC_WIDTH_SHIFT | + PL080_WIDTH_16BIT << FTDMAC020_LLI_DST_WIDTH_SHIFT; + break; + case PL08X_BUS_WIDTH_32_BITS: + cctl |= PL080_WIDTH_32BIT << FTDMAC020_LLI_SRC_WIDTH_SHIFT | + PL080_WIDTH_32BIT << FTDMAC020_LLI_DST_WIDTH_SHIFT; + break; + } + + /* + * By default mask the TC IRQ on all LLIs, it will be unmasked on + * the last LLI item by other code. + */ + cctl |= FTDMAC020_LLI_TC_MSK; + + /* + * Both to be incremented so leave bits FTDMAC020_LLI_SRCAD_CTL + * and FTDMAC020_LLI_DSTAD_CTL as zero + */ + if (pl08x->vd->dualmaster) + cctl |= pl08x_select_bus(true, + pl08x->mem_buses, + pl08x->mem_buses); + + return cctl; } /* @@ -1452,18 +1915,16 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( dsg->src_addr = src; dsg->dst_addr = dest; dsg->len = len; - - /* Set platform data for m2m */ - txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; - txd->cctl = pl08x->pd->memcpy_channel.cctl_memcpy & - ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2); - - /* Both to be incremented or the code will break */ - txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; - - if (pl08x->vd->dualmaster) - txd->cctl |= pl08x_select_bus(pl08x->mem_buses, - pl08x->mem_buses); + if (pl08x->vd->ftdmac020) { + /* Writing CCFG zero ENABLES all interrupts */ + txd->ccfg = 0; + txd->cctl = pl08x_ftdmac020_memcpy_cctl(pl08x); + } else { + txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK | + PL080_CONFIG_TC_IRQ_MASK | + PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; + txd->cctl = pl08x_memcpy_cctl(pl08x); + } ret = pl08x_fill_llis_for_desc(plchan->host, txd); if (!ret) { @@ -1527,7 +1988,7 @@ static struct pl08x_txd *pl08x_init_txd( return NULL; } - txd->cctl = cctl | pl08x_select_bus(src_buses, dst_buses); + txd->cctl = cctl | pl08x_select_bus(false, src_buses, dst_buses); if (plchan->cfg.device_fc) tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER : @@ -1536,7 +1997,9 @@ static struct pl08x_txd *pl08x_init_txd( tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER : PL080_FLOW_PER2MEM; - txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT; + txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK | + PL080_CONFIG_TC_IRQ_MASK | + tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT; ret = pl08x_request_mux(plchan); if (ret < 0) { @@ -1813,6 +2276,11 @@ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) /* The Nomadik variant does not have the config register */ if (pl08x->vd->nomadik) return; + /* The FTDMAC020 variant does this in another register */ + if (pl08x->vd->ftdmac020) { + writel(PL080_CONFIG_ENABLE, pl08x->base + FTDMAC020_CSR); + return; + } writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG); } @@ -1925,9 +2393,16 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, chan->signal = i; pl08x_dma_slave_init(chan); } else { - chan->cd = &pl08x->pd->memcpy_channel; + chan->cd = kzalloc(sizeof(*chan->cd), GFP_KERNEL); + if (!chan->cd) { + kfree(chan); + return -ENOMEM; + } + chan->cd->bus_id = "memcpy"; + chan->cd->periph_buses = pl08x->pd->mem_buses; chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i); if (!chan->name) { + kfree(chan->cd); kfree(chan); return -ENOMEM; } @@ -2009,12 +2484,15 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data) pl08x_state_str(chan->state)); } - seq_printf(s, "\nPL08x virtua |