diff options
author | Alexandre Bounine <alexandre.bounine@idt.com> | 2011-11-02 13:39:09 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-11-02 16:07:01 -0700 |
commit | 48618fb4e522d9d02e217ac05f52749545c1af20 (patch) | |
tree | 4699179c3eacc0ec63d03ac631fae6822fa10969 /drivers | |
parent | e80dd9a7bca4057d5a09d1ba94a7ba0791e7426a (diff) |
RapidIO: add mport driver for Tsi721 bridge
Add RapidIO mport driver for IDT TSI721 PCI Express-to-SRIO bridge device.
The driver provides full set of callback functions defined for mport
devices in RapidIO subsystem. It also is compatible with current version
of RIONET driver (Ethernet over RapidIO messaging services).
This patch is applicable to kernel versions starting from 2.6.39.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Chul Kim <chul.kim@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/rapidio/Kconfig | 6 | ||||
-rw-r--r-- | drivers/rapidio/Makefile | 1 | ||||
-rw-r--r-- | drivers/rapidio/devices/Kconfig | 10 | ||||
-rw-r--r-- | drivers/rapidio/devices/Makefile | 5 | ||||
-rw-r--r-- | drivers/rapidio/devices/tsi721.c | 2360 | ||||
-rw-r--r-- | drivers/rapidio/devices/tsi721.h | 766 |
6 files changed, 3146 insertions, 2 deletions
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index 070211a5955c..bc8719238793 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -1,6 +1,8 @@ # # RapidIO configuration # +source "drivers/rapidio/devices/Kconfig" + config RAPIDIO_DISC_TIMEOUT int "Discovery timeout duration (seconds)" depends on RAPIDIO @@ -20,8 +22,6 @@ config RAPIDIO_ENABLE_RX_TX_PORTS ports for Input/Output direction to allow other traffic than Maintenance transfers. -source "drivers/rapidio/switches/Kconfig" - config RAPIDIO_DEBUG bool "RapidIO subsystem debug messages" depends on RAPIDIO @@ -32,3 +32,5 @@ config RAPIDIO_DEBUG going on. If you are unsure about this, say N here. + +source "drivers/rapidio/switches/Kconfig" diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile index 89b8eca825b5..ec3fb8121004 100644 --- a/drivers/rapidio/Makefile +++ b/drivers/rapidio/Makefile @@ -4,5 +4,6 @@ obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o obj-$(CONFIG_RAPIDIO) += switches/ +obj-$(CONFIG_RAPIDIO) += devices/ subdir-ccflags-$(CONFIG_RAPIDIO_DEBUG) := -DDEBUG diff --git a/drivers/rapidio/devices/Kconfig b/drivers/rapidio/devices/Kconfig new file mode 100644 index 000000000000..12a9d7f7040b --- /dev/null +++ b/drivers/rapidio/devices/Kconfig @@ -0,0 +1,10 @@ +# +# RapidIO master port configuration +# + +config RAPIDIO_TSI721 + bool "IDT Tsi721 PCI Express SRIO Controller support" + depends on RAPIDIO && PCIEPORTBUS + default "n" + ---help--- + Include support for IDT Tsi721 PCI Express Serial RapidIO controller. diff --git a/drivers/rapidio/devices/Makefile b/drivers/rapidio/devices/Makefile new file mode 100644 index 000000000000..3b7b4e2dff7c --- /dev/null +++ b/drivers/rapidio/devices/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for RapidIO devices +# + +obj-$(CONFIG_RAPIDIO_TSI721) += tsi721.o diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c new file mode 100644 index 000000000000..5225930a10cd --- /dev/null +++ b/drivers/rapidio/devices/tsi721.c @@ -0,0 +1,2360 @@ +/* + * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge + * + * Copyright 2011 Integrated Device Technology, Inc. + * Alexandre Bounine <alexandre.bounine@idt.com> + * Chul Kim <chul.kim@idt.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/rio.h> +#include <linux/rio_drv.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/kfifo.h> +#include <linux/delay.h> + +#include "tsi721.h" + +#define DEBUG_PW /* Inbound Port-Write debugging */ + +static void tsi721_omsg_handler(struct tsi721_device *priv, int ch); +static void tsi721_imsg_handler(struct tsi721_device *priv, int ch); + +/** + * tsi721_lcread - read from local SREP config space + * @mport: RapidIO master port info + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be read into + * + * Generates a local SREP space read. Returns %0 on + * success or %-EINVAL on failure. + */ +static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset, + int len, u32 *data) +{ + struct tsi721_device *priv = mport->priv; + + if (len != sizeof(u32)) + return -EINVAL; /* only 32-bit access is supported */ + + *data = ioread32(priv->regs + offset); + + return 0; +} + +/** + * tsi721_lcwrite - write into local SREP config space + * @mport: RapidIO master port info + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be written + * + * Generates a local write into SREP configuration space. Returns %0 on + * success or %-EINVAL on failure. + */ +static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset, + int len, u32 data) +{ + struct tsi721_device *priv = mport->priv; + + if (len != sizeof(u32)) + return -EINVAL; /* only 32-bit access is supported */ + + iowrite32(data, priv->regs + offset); + + return 0; +} + +/** + * tsi721_maint_dma - Helper function to generate RapidIO maintenance + * transactions using designated Tsi721 DMA channel. + * @priv: pointer to tsi721 private data + * @sys_size: RapdiIO transport system size + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Location to be read from or write into + * @do_wr: Operation flag (1 == MAINT_WR) + * + * Generates a RapidIO maintenance transaction (Read or Write). + * Returns %0 on success and %-EINVAL or %-EFAULT on failure. + */ +static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size, + u16 destid, u8 hopcount, u32 offset, int len, + u32 *data, int do_wr) +{ + struct tsi721_dma_desc *bd_ptr; + u32 rd_count, swr_ptr, ch_stat; + int i, err = 0; + u32 op = do_wr ? MAINT_WR : MAINT_RD; + + if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32))) + return -EINVAL; + + bd_ptr = priv->bdma[TSI721_DMACH_MAINT].bd_base; + + rd_count = ioread32( + priv->regs + TSI721_DMAC_DRDCNT(TSI721_DMACH_MAINT)); + + /* Initialize DMA descriptor */ + bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid); + bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04); + bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset); + bd_ptr[0].raddr_hi = 0; + if (do_wr) + bd_ptr[0].data[0] = cpu_to_be32p(data); + else + bd_ptr[0].data[0] = 0xffffffff; + + mb(); + + /* Start DMA operation */ + iowrite32(rd_count + 2, + priv->regs + TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT)); + ioread32(priv->regs + TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT)); + i = 0; + + /* Wait until DMA transfer is finished */ + while ((ch_stat = ioread32(priv->regs + + TSI721_DMAC_STS(TSI721_DMACH_MAINT))) & TSI721_DMAC_STS_RUN) { + udelay(1); + if (++i >= 5000000) { + dev_dbg(&priv->pdev->dev, + "%s : DMA[%d] read timeout ch_status=%x\n", + __func__, TSI721_DMACH_MAINT, ch_stat); + if (!do_wr) + *data = 0xffffffff; + err = -EIO; + goto err_out; + } + } + + if (ch_stat & TSI721_DMAC_STS_ABORT) { + /* If DMA operation aborted due to error, + * reinitialize DMA channel + */ + dev_dbg(&priv->pdev->dev, "%s : DMA ABORT ch_stat=%x\n", + __func__, ch_stat); + dev_dbg(&priv->pdev->dev, "OP=%d : destid=%x hc=%x off=%x\n", + do_wr ? MAINT_WR : MAINT_RD, destid, hopcount, offset); + iowrite32(TSI721_DMAC_INT_ALL, + priv->regs + TSI721_DMAC_INT(TSI721_DMACH_MAINT)); + iowrite32(TSI721_DMAC_CTL_INIT, + priv->regs + TSI721_DMAC_CTL(TSI721_DMACH_MAINT)); + udelay(10); + iowrite32(0, priv->regs + + TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT)); + udelay(1); + if (!do_wr) + *data = 0xffffffff; + err = -EIO; + goto err_out; + } + + if (!do_wr) + *data = be32_to_cpu(bd_ptr[0].data[0]); + + /* + * Update descriptor status FIFO RD pointer. + * NOTE: Skipping check and clear FIFO entries because we are waiting + * for transfer to be completed. + */ + swr_ptr = ioread32(priv->regs + TSI721_DMAC_DSWP(TSI721_DMACH_MAINT)); + iowrite32(swr_ptr, priv->regs + TSI721_DMAC_DSRP(TSI721_DMACH_MAINT)); +err_out: + + return err; +} + +/** + * tsi721_cread_dma - Generate a RapidIO maintenance read transaction + * using Tsi721 BDMA engine. + * @mport: RapidIO master port control structure + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Location to be read into + * + * Generates a RapidIO maintenance read transaction. + * Returns %0 on success and %-EINVAL or %-EFAULT on failure. + */ +static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid, + u8 hopcount, u32 offset, int len, u32 *data) +{ + struct tsi721_device *priv = mport->priv; + + return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount, + offset, len, data, 0); +} + +/** + * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction + * using Tsi721 BDMA engine + * @mport: RapidIO master port control structure + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Value to be written + * + * Generates a RapidIO maintenance write transaction. + * Returns %0 on success and %-EINVAL or %-EFAULT on failure. + */ +static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid, + u8 hopcount, u32 offset, int len, u32 data) +{ + struct tsi721_device *priv = mport->priv; + u32 temp = data; + + return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount, + offset, len, &temp, 1); +} + +/** + * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler + * @mport: RapidIO master port structure + * + * Handles inbound port-write interrupts. Copies PW message from an internal + * buffer into PW message FIFO and schedules deferred routine to process + * queued messages. + */ +static int +tsi721_pw_handler(struct rio_mport *mport) +{ + struct tsi721_device *priv = mport->priv; + u32 pw_stat; + u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)]; + + + pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT); + + if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) { + pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0)); + pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1)); + pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2)); + pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3)); + + /* Queue PW message (if there is room in FIFO), + * otherwise discard it. + */ + spin_lock(&priv->pw_fifo_lock); + if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE) + kfifo_in(&priv->pw_fifo, pw_buf, + TSI721_RIO_PW_MSG_SIZE); + else + priv->pw_discard_count++; + spin_unlock(&priv->pw_fifo_lock); + } + + /* Clear pending PW interrupts */ + iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL, + priv->regs + TSI721_RIO_PW_RX_STAT); + + schedule_work(&priv->pw_work); + + return 0; +} + +static void tsi721_pw_dpc(struct work_struct *work) +{ + struct tsi721_device *priv = container_of(work, struct tsi721_device, + pw_work); + u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)]; /* Use full size PW message + buffer for RIO layer */ + + /* + * Process port-write messages + */ + while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)msg_buffer, + TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) { + /* Process one message */ +#ifdef DEBUG_PW + { + u32 i; + pr_debug("%s : Port-Write Message:", __func__); + for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); ) { + pr_debug("0x%02x: %08x %08x %08x %08x", i*4, + msg_buffer[i], msg_buffer[i + 1], + msg_buffer[i + 2], msg_buffer[i + 3]); + i += 4; + } + pr_debug("\n"); + } +#endif + /* Pass the port-write message to RIO core for processing */ + rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer); + } +} + +/** + * tsi721_pw_enable - enable/disable port-write interface init + * @mport: Master port implementing the port write unit + * @enable: 1=enable; 0=disable port-write message handling + */ +static int tsi721_pw_enable(struct rio_mport *mport, int enable) +{ + struct tsi721_device *priv = mport->priv; + u32 rval; + + rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE); + + if (enable) + rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX; + else + rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX; + + /* Clear pending PW interrupts */ + iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL, + priv->regs + TSI721_RIO_PW_RX_STAT); + /* Update enable bits */ + iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE); + + return 0; +} + +/** + * tsi721_dsend - Send a RapidIO doorbell + * @mport: RapidIO master port info + * @index: ID of RapidIO interface + * @destid: Destination ID of target device + * @data: 16-bit info field of RapidIO doorbell + * + * Sends a RapidIO doorbell message. Always returns %0. + */ +static int tsi721_dsend(struct rio_mport *mport, int index, + u16 destid, u16 data) +{ + struct tsi721_device *priv = mport->priv; + u32 offset; + + offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) | + (destid << 2); + + dev_dbg(&priv->pdev->dev, + "Send Doorbell 0x%04x to destID 0x%x\n", data, destid); + iowrite16be(data, priv->odb_base + offset); + + return 0; +} + +/** + * tsi721_dbell_handler - Tsi721 doorbell interrupt handler + * @mport: RapidIO master port structure + * + * Handles inbound doorbell interrupts. Copies doorbell entry from an internal + * buffer into DB message FIFO and schedules deferred routine to process + * queued DBs. + */ +static int +tsi721_dbell_handler(struct rio_mport *mport) +{ + struct tsi721_device *priv = mport->priv; + u32 regval; + + /* Disable IDB interrupts */ + regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + regval &= ~TSI721_SR_CHINT_IDBQRCV; + iowrite32(regval, + priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + + schedule_work(&priv->idb_work); + + return 0; +} + +static void tsi721_db_dpc(struct work_struct *work) +{ + struct tsi721_device *priv = container_of(work, struct tsi721_device, + idb_work); + struct rio_mport *mport; + struct rio_dbell *dbell; + int found = 0; + u32 wr_ptr, rd_ptr; + u64 *idb_entry; + u32 regval; + union { + u64 msg; + u8 bytes[8]; + } idb; + + /* + * Process queued inbound doorbells + */ + mport = priv->mport; + + wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)); + rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); + + while (wr_ptr != rd_ptr) { + idb_entry = (u64 *)(priv->idb_base + + (TSI721_IDB_ENTRY_SIZE * rd_ptr)); + rd_ptr++; + idb.msg = *idb_entry; + *idb_entry = 0; + + /* Process one doorbell */ + list_for_each_entry(dbell, &mport->dbells, node) { + if ((dbell->res->start <= DBELL_INF(idb.bytes)) && + (dbell->res->end >= DBELL_INF(idb.bytes))) { + found = 1; + break; + } + } + + if (found) { + dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes), + DBELL_TID(idb.bytes), DBELL_INF(idb.bytes)); + } else { + dev_dbg(&priv->pdev->dev, + "spurious inb doorbell, sid %2.2x tid %2.2x" + " info %4.4x\n", DBELL_SID(idb.bytes), + DBELL_TID(idb.bytes), DBELL_INF(idb.bytes)); + } + } + + iowrite32(rd_ptr & (IDB_QSIZE - 1), + priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); + + /* Re-enable IDB interrupts */ + regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + regval |= TSI721_SR_CHINT_IDBQRCV; + iowrite32(regval, + priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); +} + +/** + * tsi721_irqhandler - Tsi721 interrupt handler + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported + * interrupt events and calls an event-specific handler(s). + */ +static irqreturn_t tsi721_irqhandler(int irq, void *ptr) +{ + struct rio_mport *mport = (struct rio_mport *)ptr; + struct tsi721_device *priv = mport->priv; + u32 dev_int; + u32 dev_ch_int; + u32 intval; + u32 ch_inte; + + dev_int = ioread32(priv->regs + TSI721_DEV_INT); + if (!dev_int) + return IRQ_NONE; + + dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT); + + if (dev_int & TSI721_DEV_INT_SR2PC_CH) { + /* Service SR2PC Channel interrupts */ + if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) { + /* Service Inbound Doorbell interrupt */ + intval = ioread32(priv->regs + + TSI721_SR_CHINT(IDB_QUEUE)); + if (intval & TSI721_SR_CHINT_IDBQRCV) + tsi721_dbell_handler(mport); + else + dev_info(&priv->pdev->dev, + "Unsupported SR_CH_INT %x\n", intval); + + /* Clear interrupts */ + iowrite32(intval, + priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + } + } + + if (dev_int & TSI721_DEV_INT_SMSG_CH) { + int ch; + + /* + * Service channel interrupts from Messaging Engine + */ + + if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */ + /* Disable signaled OB MSG Channel interrupts */ + ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M); + iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); + + /* + * Process Inbound Message interrupt for each MBOX + */ + for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) { + if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch))) + continue; + tsi721_imsg_handler(priv, ch); + } + } + + if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */ + /* Disable signaled OB MSG Channel interrupts */ + ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE); + ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M); + iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE); + + /* + * Process Outbound Message interrupts for each MBOX + */ + + for (ch = 0; ch < RIO_MAX_MBOX; ch++) { + if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch))) + continue; + tsi721_omsg_handler(priv, ch); + } + } + } + + if (dev_int & TSI721_DEV_INT_SRIO) { + /* Service SRIO MAC interrupts */ + intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT); + if (intval & TSI721_RIO_EM_INT_STAT_PW_RX) + tsi721_pw_handler(mport); + } + + return IRQ_HANDLED; +} + +static void tsi721_interrupts_init(struct tsi721_device *priv) +{ + u32 intr; + + /* Enable IDB interrupts */ + iowrite32(TSI721_SR_CHINT_ALL, + priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + iowrite32(TSI721_SR_CHINT_IDBQRCV, + priv->regs + TSI721_SR_CHINTE(IDB_QUEUE)); + iowrite32(TSI721_INT_SR2PC_CHAN(IDB_QUEUE), + priv->regs + TSI721_DEV_CHAN_INTE); + + /* Enable SRIO MAC interrupts */ + iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT, + priv->regs + TSI721_RIO_EM_DEV_INT_EN); + + if (priv->flags & TSI721_USING_MSIX) + intr = TSI721_DEV_INT_SRIO; + else + intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO | + TSI721_DEV_INT_SMSG_CH; + + iowrite32(intr, priv->regs + TSI721_DEV_INTE); + ioread32(priv->regs + TSI721_DEV_INTE); +} + +#ifdef CONFIG_PCI_MSI +/** + * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles outbound messaging interrupts signaled using MSI-X. + */ +static irqreturn_t tsi721_omsg_msix(int irq, void *ptr) +{ + struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; + int mbox; + + mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX; + tsi721_omsg_handler(priv, mbox); + return IRQ_HANDLED; +} + +/** + * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles inbound messaging interrupts signaled using MSI-X. + */ +static irqreturn_t tsi721_imsg_msix(int irq, void *ptr) +{ + struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; + int mbox; + + mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX; + tsi721_imsg_handler(priv, mbox + 4); + return IRQ_HANDLED; +} + +/** + * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles Tsi721 interrupts from SRIO MAC. + */ +static irqreturn_t tsi721_srio_msix(int irq, void *ptr) +{ + struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; + u32 srio_int; + + /* Service SRIO MAC interrupts */ + srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT); + if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX) + tsi721_pw_handler((struct rio_mport *)ptr); + + return IRQ_HANDLED; +} + +/** + * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler + * @irq: Linux interrupt number + * @ptr: Pointer to interrupt-specific data (mport structure) + * + * Handles Tsi721 interrupts from SR2PC Channel. + * NOTE: At this moment services only one SR2PC channel associated with inbound + * doorbells. + */ +static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr) +{ + struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv; + u32 sr_ch_int; + + /* Service Inbound DB interrupt from SR2PC channel */ + sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV) + tsi721_dbell_handler((struct rio_mport *)ptr); + + /* Clear interrupts */ + iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + /* Read back to ensure that interrupt was cleared */ + sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE)); + + return IRQ_HANDLED; +} + +/** + * tsi721_request_msix - register interrupt service for MSI-X mode. + * @mport: RapidIO master port structure + * + * Registers MSI-X interrupt service routines for interrupts that are active + * immediately after mport initialization. Messaging interrupt service routines + * should be registered during corresponding open requests. + */ +static int tsi721_request_msix(struct rio_mport *mport) +{ + struct tsi721_device *priv = mport->priv; + int err = 0; + + err = request_irq(priv->msix[TSI721_VECT_IDB].vector, + tsi721_sr2pc_ch_msix, 0, + priv->msix[TSI721_VECT_IDB].irq_name, (void *)mport); + if (err) + goto out; + + err = request_irq(priv->msix[TSI721_VECT_PWRX].vector, + tsi721_srio_msix, 0, + priv->msix[TSI721_VECT_PWRX].irq_name, (void *)mport); + if (err) + free_irq( + priv->msix[TSI721_VECT_IDB].vector, + (void *)mport); +out: + return err; +} + +/** + * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721. + * @priv: pointer to tsi721 private data + * + * Configures MSI-X support for Tsi721. Supports only an exact number + * of requested vectors. + */ +static int tsi721_enable_msix(struct tsi721_device *priv) +{ + struct msix_entry entries[TSI721_VECT_MAX]; + int err; + int i; + + entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE); + entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT; + + /* + * Initialize MSI-X entries for Messaging Engine: + * this driver supports four RIO mailboxes (inbound and outbound) + * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore + * offset +4 is added to IB MBOX number. + */ + for (i = 0; i < RIO_MAX_MBOX; i++) { + entries[TSI721_VECT_IMB0_RCV + i].entry = + TSI721_MSIX_IMSG_DQ_RCV(i + 4); + entries[TSI721_VECT_IMB0_INT + i].entry = + TSI721_MSIX_IMSG_INT(i + 4); + entries[TSI721_VECT_OMB0_DONE + i].entry = + TSI721_MSIX_OMSG_DONE(i); + entries[TSI721_VECT_OMB0_INT + i].entry = + TSI721_MSIX_OMSG_INT(i); + } + + err = pci_enable_msix(priv->pdev, entries, ARRAY_SIZE(entries)); + if (err) { + if (err > 0) + dev_info(&priv->pdev->dev, + "Only %d MSI-X vectors available, " + "not using MSI-X\n", err); + return err; + } + + /* + * Copy MSI-X vector information into tsi721 private structure + */ + priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector; + snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX, + DRV_NAME "-idb@pci:%s", pci_name(priv->pdev)); + priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector; + snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX, + DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev)); + + for (i = 0; i < RIO_MAX_MBOX; i++) { + priv->msix[TSI721_VECT_IMB0_RCV + i].vector = + entries[TSI721_VECT_IMB0_RCV + i].vector; + snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s", + i, pci_name(priv->pdev)); + + priv->msix[TSI721_VECT_IMB0_INT + i].vector = + entries[TSI721_VECT_IMB0_INT + i].vector; + snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s", + i, pci_name(priv->pdev)); + + priv->msix[TSI721_VECT_OMB0_DONE + i].vector = + entries[TSI721_VECT_OMB0_DONE + i].vector; + snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s", + i, pci_name(priv->pdev)); + + priv->msix[TSI721_VECT_OMB0_INT + i].vector = + entries[TSI721_VECT_OMB0_INT + i].vector; + snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name, + IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s", + i, pci_name(priv->pdev)); + } + + return 0; +} +#endif /* CONFIG_PCI_MSI */ + +static int tsi721_request_irq(struct rio_mport *mport) +{ + struct tsi721_device *priv = mport->priv; + int err; + +#ifdef CONFIG_PCI_MSI + if (priv->flags & TSI721_USING_MSIX) + err = tsi721_request_msix(mport); + else +#endif + err = request_irq(priv->pdev->irq, tsi721_irqhandler, + (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED, + DRV_NAME, (void *)mport); + + if (err) + dev_err(&priv->pdev->dev, + "Unable to allocate interrupt, Error: %d\n", err); + + return err; +} + +/** + * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO) + * translation regions. + * @priv: pointer to tsi721 private data + * + * Disables SREP translation regions. + */ +static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv) +{ + int i; + + /* Disable all PC2SR translation windows */ + for (i = 0; i < TSI721_OBWIN_NUM; i++) + iowrite32(0, priv->regs + TSI721_OBWINLB(i)); +} + +/** + * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe) + * translation regions. + * @priv: pointer to tsi721 private data + * + * Disables inbound windows. + */ +static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv) +{ + int i; + + /* Disable all SR2PC inbound windows */ + for (i = 0; i < TSI721_IBWIN_NUM; i++) + iowrite32(0, priv->regs + TSI721_IBWINLB(i)); +} + +/** + * tsi721_port_write_init - Inbound port write interface init + * @priv: pointer to tsi721 private data + * + * Initializes inbound port write handler. + * Returns %0 on success or %-ENOMEM on failure. + */ +static int tsi721_port_write_init(struct tsi721_device *priv) +{ + priv->pw_discard_count = 0; + INIT_WORK(&priv->pw_work, tsi721_pw_dpc); + spin_lock_init(&priv->pw_fifo_lock); + if (kfifo_alloc(&priv->pw_fifo, + TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) { + dev_err(&priv->pdev->dev, "PW FIFO allocation failed\n"); + return -ENOMEM; + } + + /* Use reliable port-write capture mode */ + iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL); + return 0; +} + +static int tsi721_doorbell_init(struct tsi721_device *priv) +{ + /* Outbound Doorbells do not require any setup. + * Tsi721 uses dedicated PCI BAR1 to generate doorbells. + * That BAR1 was mapped during the probe routine. + */ + + /* Initialize Inbound Doorbell processing DPC and queue */ + priv->db_discard_count = 0; + INIT_WORK(&priv->idb_work, tsi721_db_dpc); + + /* Allocate buffer for inbound doorbells queue */ + priv->idb_base = dma_alloc_coherent(&priv->pdev->dev, + IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, + &priv->idb_dma, GFP_KERNEL); + if (!priv->idb_base) + return -ENOMEM; + + memset(priv->idb_base, 0, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE); + + dev_dbg(&priv->pdev->dev, "Allocated IDB buffer @ %p (phys = %llx)\n", + priv->idb_base, (unsigned long long)priv->idb_dma); + + iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE), + priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE)); + iowrite32(((u64)priv->idb_dma >> 32), + priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE)); + iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR), + priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE)); + /* Enable accepting all inbound doorbells */ + iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE)); + + iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE)); + + iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE)); + + return 0; +} + +static void tsi721_doorbell_free(struct tsi721_device *priv) +{ + if (priv->idb_base == NULL) + return; + + /* Free buffer allocated for inbound doorbell queue */ + dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, + priv->idb_base, priv->idb_dma); + priv->idb_base = NULL; +} + +static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) +{ + struct tsi721_dma_desc *bd_ptr; + u64 *sts_ptr; + dma_addr_t bd_phys, sts_phys; + int sts_size; + int bd_num = priv->bdma[chnum].bd_num; + + dev_dbg(&priv->pdev->dev, "Init Block DMA Engine, CH%d\n", chnum); + + /* + * Initialize DMA channel for maintenance requests + */ + + /* Allocate space for DMA descriptors */ + bd_ptr = dma_alloc_coherent(&priv->pdev->dev, + bd_num * sizeof(struct tsi721_dma_desc), + &bd_phys, GFP_KERNEL); + if (!bd_ptr) + return -ENOMEM; + + priv->bdma[chnum].bd_phys = bd_phys; + priv->bdma[chnum].bd_base = bd_ptr; + + memset(bd_ptr, 0, bd_num * sizeof(struct tsi721_dma_desc)); + + dev_dbg(&priv->pdev->dev, "DMA descriptors @ %p (phys = %llx)\n", + bd_ptr, (unsigned long long)bd_phys); + + /* Allocate space for descriptor status FIFO */ + sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ? + bd_num : TSI721_DMA_MINSTSSZ; + sts_size = roundup_pow_of_two(sts_size); + sts_ptr = dma_alloc_coherent(&priv->pdev->dev, + sts_size * sizeof(struct tsi721_dma_sts), + &sts_phys, GFP_KERNEL); + if (!sts_ptr) { + /* Free space allocated for DMA descriptors */ + dma_free_coherent(&priv->pdev->dev, + bd_num * sizeof(struct tsi721_dma_desc), + bd_ptr, bd_phys); + priv->bdma[chnum].bd_base = NULL; + return -ENOMEM; + } + + priv->bdma[chnum].sts_phys = sts_phys; + priv->bdma[chnum].sts_base = sts_ptr; + priv->bdma[chnum].sts_size = sts_size; + + memset(sts_ptr, 0, sts_size); + + dev_dbg(&priv->pdev->dev, + "desc status FIFO @ %p (phys = %llx) size=0x%x\n", + sts_ptr, (unsigned long long)sts_phys, sts_size); + + /* Initialize DMA descriptors ring */ + bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29); + bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys & + TSI721_DMAC_DPTRL_MASK); + bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32); + + /* Setup DMA descriptor pointers */ + iowrite32(((u64)bd_phys >> 32), + priv->regs + TSI721_DMAC_DPTRH(chnum)); + iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK), + priv->regs + TSI721_DMAC_DPTRL(chnum)); + + /* Setup descriptor status FIFO */ + iowrite32(((u64)sts_phys >> 32), + priv->regs + TSI721_DMAC_DSBH(chnum)); + iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK), + priv->regs + TSI721_DMAC_DSBL(chnum)); + iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size), + priv->regs + TSI721_DMAC_DSSZ(chnum)); + + /* Clear interrupt bits */ |