net: phy: mdio: add IPQ4019 MDIO driver

This patch adds the driver for the MDIO interface
inside of Qualcomm IPQ40xx series SoC-s.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 168 insertions, 0 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index bacfee41b564..2a32f26ead0b 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -157,6 +157,13 @@ config MDIO_I2C
 
 	  This is library mode.
 
+config MDIO_IPQ4019
+	tristate "Qualcomm IPQ4019 MDIO interface support"
+	depends on HAS_IOMEM && OF_MDIO
+	help
+	  This driver supports the MDIO interface found in Qualcomm
+	  IPQ40xx series Soc-s.
+
 config MDIO_IPQ8064
 	tristate "Qualcomm IPQ8064 MDIO interface support"
 	depends on HAS_IOMEM && OF_MDIO
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index cd345b75d127..dc9e53b511d6 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-cavium.o
 obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
 obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o
 obj-$(CONFIG_MDIO_I2C)		+= mdio-i2c.o
+obj-$(CONFIG_MDIO_IPQ4019)	+= mdio-ipq4019.o
 obj-$(CONFIG_MDIO_IPQ8064)	+= mdio-ipq8064.o
 obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o
 obj-$(CONFIG_MDIO_MSCC_MIIM)	+= mdio-mscc-miim.o
diff --git a/drivers/net/phy/mdio-ipq4019.c b/drivers/net/phy/mdio-ipq4019.c
new file mode 100644
index 000000000000..1ce81ff2f41d
--- /dev/null
+++ b/drivers/net/phy/mdio-ipq4019.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved. */
+/* Copyright (c) 2020 Sartura Ltd. */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#define MDIO_ADDR_REG				0x44
+#define MDIO_DATA_WRITE_REG			0x48
+#define MDIO_DATA_READ_REG			0x4c
+#define MDIO_CMD_REG				0x50
+#define MDIO_CMD_ACCESS_BUSY		BIT(16)
+#define MDIO_CMD_ACCESS_START		BIT(8)
+#define MDIO_CMD_ACCESS_CODE_READ	0
+#define MDIO_CMD_ACCESS_CODE_WRITE	1
+
+#define ipq4019_MDIO_TIMEOUT	10000
+#define ipq4019_MDIO_SLEEP		10
+
+struct ipq4019_mdio_data {
+	void __iomem	*membase;
+};
+
+static int ipq4019_mdio_wait_busy(struct mii_bus *bus)
+{
+	struct ipq4019_mdio_data *priv = bus->priv;
+	unsigned int busy;
+
+	return readl_poll_timeout(priv->membase + MDIO_CMD_REG, busy,
+				  (busy & MDIO_CMD_ACCESS_BUSY) == 0,
+				  ipq4019_MDIO_SLEEP, ipq4019_MDIO_TIMEOUT);
+}
+
+static int ipq4019_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+	struct ipq4019_mdio_data *priv = bus->priv;
+	unsigned int cmd;
+
+	/* Reject clause 45 */
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	if (ipq4019_mdio_wait_busy(bus))
+		return -ETIMEDOUT;
+
+	/* issue the phy address and reg */
+	writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG);
+
+	cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_READ;
+
+	/* issue read command */
+	writel(cmd, priv->membase + MDIO_CMD_REG);
+
+	/* Wait read complete */
+	if (ipq4019_mdio_wait_busy(bus))
+		return -ETIMEDOUT;
+
+	/* Read and return data */
+	return readl(priv->membase + MDIO_DATA_READ_REG);
+}
+
+static int ipq4019_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+							 u16 value)
+{
+	struct ipq4019_mdio_data *priv = bus->priv;
+	unsigned int cmd;
+
+	/* Reject clause 45 */
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	if (ipq4019_mdio_wait_busy(bus))
+		return -ETIMEDOUT;
+
+	/* issue the phy address and reg */
+	writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG);
+
+	/* issue write data */
+	writel(value, priv->membase + MDIO_DATA_WRITE_REG);
+
+	cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_WRITE;
+	/* issue write command */
+	writel(cmd, priv->membase + MDIO_CMD_REG);
+
+	/* Wait write complete */
+	if (ipq4019_mdio_wait_busy(bus))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int ipq4019_mdio_probe(struct platform_device *pdev)
+{
+	struct ipq4019_mdio_data *priv;
+	struct mii_bus *bus;
+	int ret;
+
+	bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv));
+	if (!bus)
+		return -ENOMEM;
+
+	priv = bus->priv;
+
+	priv->membase = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->membase))
+		return PTR_ERR(priv->membase);
+
+	bus->name = "ipq4019_mdio";
+	bus->read = ipq4019_mdio_read;
+	bus->write = ipq4019_mdio_write;
+	bus->parent = &pdev->dev;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id);
+
+	ret = of_mdiobus_register(bus, pdev->dev.of_node);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, bus);
+
+	return 0;
+}
+
+static int ipq4019_mdio_remove(struct platform_device *pdev)
+{
+	struct mii_bus *bus = platform_get_drvdata(pdev);
+
+	mdiobus_unregister(bus);
+
+	return 0;
+}
+
+static const struct of_device_id ipq4019_mdio_dt_ids[] = {
+	{ .compatible = "qcom,ipq4019-mdio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ipq4019_mdio_dt_ids);
+
+static struct platform_driver ipq4019_mdio_driver = {
+	.probe = ipq4019_mdio_probe,
+	.remove = ipq4019_mdio_remove,
+	.driver = {
+		.name = "ipq4019-mdio",
+		.of_match_table = ipq4019_mdio_dt_ids,
+	},
+};
+
+module_platform_driver(ipq4019_mdio_driver);
+
+MODULE_DESCRIPTION("ipq4019 MDIO interface driver");
+MODULE_AUTHOR("Qualcomm Atheros");
+MODULE_LICENSE("Dual BSD/GPL");