diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-10-19 12:50:44 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-10-19 12:50:44 -0700 |
commit | 278f1d0730f4d0acdfc64256ad9b1066d0f3ab57 (patch) | |
tree | 27d983de59c4a857650d0472831969e2bf8c8706 /drivers | |
parent | d590c6cdd96c8a254e7935ad12f65e4058c95a1b (diff) | |
parent | 3e27a8445c21f8056517f188303827450590d868 (diff) |
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Highlights from the I2C subsystem for 3.18:
- new drivers for Axxia AM55xx, and Hisilicon hix5hd2 SoC.
- designware driver gained AMD support, exynos gained exynos7 support
The rest is usual driver stuff. Hopefully no lowlights this time"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Add Device IDs for Intel Sunrise Point PCH
i2c: hix5hd2: add i2c controller driver
i2c-imx: Disable the clock on probe failure
i2c: designware: Add support for AMD I2C controller
i2c: designware: Rework probe() to get clock a bit later
i2c: designware: Default to fast mode in case of ACPI
i2c: axxia: Add I2C driver for AXM55xx
i2c: exynos: add support for HSI2C module on Exynos7
i2c: mxs: detect No Slave Ack on SELECT in PIO mode
i2c: cros_ec: Remove EC_I2C_FLAG_10BIT
i2c: cros-ec-tunnel: Add of match table
i2c: rcar: remove sign-compare flaw
i2c: ismt: Use minimum descriptor size
i2c: imx: Add arbitration lost check
i2c: rk3x: Remove unlikely() annotations
i2c: rcar: check for no IRQ in rcar_i2c_irq()
i2c: rcar: make rcar_i2c_prepare_msg() *void*
i2c: rcar: simplify check for last message
i2c: designware: add support of platform data to set I2C mode
i2c: designware: add support of I2C standard mode
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/i2c/busses/Kconfig | 25 | ||||
-rw-r--r-- | drivers/i2c/busses/Makefile | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-axxia.c | 559 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-cros-ec-tunnel.c | 15 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-designware-platdrv.c | 96 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-exynos5.c | 71 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-hix5hd2.c | 557 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 3 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-imx.c | 16 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-ismt.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-mxs.c | 3 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-rcar.c | 21 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-rk3x.c | 4 |
13 files changed, 1326 insertions, 48 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 2e45ae3796f1..917c3585f45b 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -77,6 +77,16 @@ config I2C_AMD8111 This driver can also be built as a module. If so, the module will be called i2c-amd8111. +config I2C_HIX5HD2 + tristate "Hix5hd2 high-speed I2C driver" + depends on ARCH_HIX5HD2 + help + Say Y here to include support for high-speed I2C controller in the + Hisilicon based hix5hd2 SoCs. + + This driver can also be built as a module. If so, the module + will be called i2c-hix5hd2. + config I2C_I801 tristate "Intel 82801 (ICH/PCH)" depends on PCI @@ -112,6 +122,7 @@ config I2C_I801 Wildcat Point (PCH) Wildcat Point-LP (PCH) BayTrail (SOC) + Sunrise Point-H (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. @@ -337,6 +348,17 @@ config I2C_AU1550 This driver can also be built as a module. If so, the module will be called i2c-au1550. +config I2C_AXXIA + tristate "Axxia I2C controller" + depends on ARCH_AXXIA || COMPILE_TEST + default ARCH_AXXIA + help + Say yes if you want to support the I2C bus on Axxia platforms. + + Please note that this controller is limited to transfers of maximum + 255 bytes in length. Any attempt to to a larger transfer will return + an error. + config I2C_BCM2835 tristate "Broadcom BCM2835 I2C controller" depends on ARCH_BCM2835 @@ -423,6 +445,7 @@ config I2C_DESIGNWARE_CORE config I2C_DESIGNWARE_PLATFORM tristate "Synopsys DesignWare Platform" select I2C_DESIGNWARE_CORE + depends on (ACPI && COMMON_CLK) || !ACPI help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. @@ -465,7 +488,7 @@ config I2C_EG20T config I2C_EXYNOS5 tristate "Exynos5 high-speed I2C driver" - depends on ARCH_EXYNOS5 && OF + depends on ARCH_EXYNOS && OF default y help High-speed I2C controller on Exynos5 based Samsung SoCs. diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 49bf07e5ef4d..78d56c54ba2b 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o # Embedded system I2C/SMBus host controller drivers obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o +obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o @@ -47,6 +48,7 @@ obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o +obj-$(CONFIG_I2C_HIX5HD2) += i2c-hix5hd2.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IMX) += i2c-imx.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c new file mode 100644 index 000000000000..768a598d8d03 --- /dev/null +++ b/drivers/i2c/busses/i2c-axxia.c @@ -0,0 +1,559 @@ +/* + * This driver implements I2C master functionality using the LSI API2C + * controller. + * + * NOTE: The controller has a limitation in that it can only do transfers of + * maximum 255 bytes at a time. If a larger transfer is attempted, error code + * (-EINVAL) is returned. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + */ +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#define SCL_WAIT_TIMEOUT_NS 25000000 +#define I2C_XFER_TIMEOUT (msecs_to_jiffies(250)) +#define I2C_STOP_TIMEOUT (msecs_to_jiffies(100)) +#define FIFO_SIZE 8 + +#define GLOBAL_CONTROL 0x00 +#define GLOBAL_MST_EN BIT(0) +#define GLOBAL_SLV_EN BIT(1) +#define GLOBAL_IBML_EN BIT(2) +#define INTERRUPT_STATUS 0x04 +#define INTERRUPT_ENABLE 0x08 +#define INT_SLV BIT(1) +#define INT_MST BIT(0) +#define WAIT_TIMER_CONTROL 0x0c +#define WT_EN BIT(15) +#define WT_VALUE(_x) ((_x) & 0x7fff) +#define IBML_TIMEOUT 0x10 +#define IBML_LOW_MEXT 0x14 +#define IBML_LOW_SEXT 0x18 +#define TIMER_CLOCK_DIV 0x1c +#define I2C_BUS_MONITOR 0x20 +#define SOFT_RESET 0x24 +#define MST_COMMAND 0x28 +#define CMD_BUSY (1<<3) +#define CMD_MANUAL (0x00 | CMD_BUSY) +#define CMD_AUTO (0x01 | CMD_BUSY) +#define MST_RX_XFER 0x2c +#define MST_TX_XFER 0x30 +#define MST_ADDR_1 0x34 +#define MST_ADDR_2 0x38 +#define MST_DATA 0x3c +#define MST_TX_FIFO 0x40 +#define MST_RX_FIFO 0x44 +#define MST_INT_ENABLE 0x48 +#define MST_INT_STATUS 0x4c +#define MST_STATUS_RFL (1 << 13) /* RX FIFO serivce */ +#define MST_STATUS_TFL (1 << 12) /* TX FIFO service */ +#define MST_STATUS_SNS (1 << 11) /* Manual mode done */ +#define MST_STATUS_SS (1 << 10) /* Automatic mode done */ +#define MST_STATUS_SCC (1 << 9) /* Stop complete */ +#define MST_STATUS_IP (1 << 8) /* Invalid parameter */ +#define MST_STATUS_TSS (1 << 7) /* Timeout */ +#define MST_STATUS_AL (1 << 6) /* Arbitration lost */ +#define MST_STATUS_ND (1 << 5) /* NAK on data phase */ +#define MST_STATUS_NA (1 << 4) /* NAK on address phase */ +#define MST_STATUS_NAK (MST_STATUS_NA | \ + MST_STATUS_ND) +#define MST_STATUS_ERR (MST_STATUS_NAK | \ + MST_STATUS_AL | \ + MST_STATUS_IP | \ + MST_STATUS_TSS) +#define MST_TX_BYTES_XFRD 0x50 +#define MST_RX_BYTES_XFRD 0x54 +#define SCL_HIGH_PERIOD 0x80 +#define SCL_LOW_PERIOD 0x84 +#define SPIKE_FLTR_LEN 0x88 +#define SDA_SETUP_TIME 0x8c +#define SDA_HOLD_TIME 0x90 + +/** + * axxia_i2c_dev - I2C device context + * @base: pointer to register struct + * @msg: pointer to current message + * @msg_xfrd: number of bytes transferred in msg + * @msg_err: error code for completed message + * @msg_complete: xfer completion object + * @dev: device reference + * @adapter: core i2c abstraction + * @i2c_clk: clock reference for i2c input clock + * @bus_clk_rate: current i2c bus clock rate + */ +struct axxia_i2c_dev { + void __iomem *base; + struct i2c_msg *msg; + size_t msg_xfrd; + int msg_err; + struct completion msg_complete; + struct device *dev; + struct i2c_adapter adapter; + struct clk *i2c_clk; + u32 bus_clk_rate; +}; + +static void i2c_int_disable(struct axxia_i2c_dev *idev, u32 mask) +{ + u32 int_en; + + int_en = readl(idev->base + MST_INT_ENABLE); + writel(int_en & ~mask, idev->base + MST_INT_ENABLE); +} + +static void i2c_int_enable(struct axxia_i2c_dev *idev, u32 mask) +{ + u32 int_en; + + int_en = readl(idev->base + MST_INT_ENABLE); + writel(int_en | mask, idev->base + MST_INT_ENABLE); +} + +/** + * ns_to_clk - Convert time (ns) to clock cycles for the given clock frequency. + */ +static u32 ns_to_clk(u64 ns, u32 clk_mhz) +{ + return div_u64(ns * clk_mhz, 1000); +} + +static int axxia_i2c_init(struct axxia_i2c_dev *idev) +{ + u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate; + u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000; + u32 t_setup; + u32 t_high, t_low; + u32 tmo_clk; + u32 prescale; + unsigned long timeout; + + dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n", + idev->bus_clk_rate, clk_mhz, divisor); + + /* Reset controller */ + writel(0x01, idev->base + SOFT_RESET); + timeout = jiffies + msecs_to_jiffies(100); + while (readl(idev->base + SOFT_RESET) & 1) { + if (time_after(jiffies, timeout)) { + dev_warn(idev->dev, "Soft reset failed\n"); + break; + } + } + + /* Enable Master Mode */ + writel(0x1, idev->base + GLOBAL_CONTROL); + + if (idev->bus_clk_rate <= 100000) { + /* Standard mode SCL 50/50, tSU:DAT = 250 ns */ + t_high = divisor * 1 / 2; + t_low = divisor * 1 / 2; + t_setup = ns_to_clk(250, clk_mhz); + } else { + /* Fast mode SCL 33/66, tSU:DAT = 100 ns */ + t_high = divisor * 1 / 3; + t_low = divisor * 2 / 3; + t_setup = ns_to_clk(100, clk_mhz); + } + + /* SCL High Time */ + writel(t_high, idev->base + SCL_HIGH_PERIOD); + /* SCL Low Time */ + writel(t_low, idev->base + SCL_LOW_PERIOD); + /* SDA Setup Time */ + writel(t_setup, idev->base + SDA_SETUP_TIME); + /* SDA Hold Time, 300ns */ + writel(ns_to_clk(300, clk_mhz), idev->base + SDA_HOLD_TIME); + /* Filter <50ns spikes */ + writel(ns_to_clk(50, clk_mhz), idev->base + SPIKE_FLTR_LEN); + + /* Configure Time-Out Registers */ + tmo_clk = ns_to_clk(SCL_WAIT_TIMEOUT_NS, clk_mhz); + + /* Find prescaler value that makes tmo_clk fit in 15-bits counter. */ + for (prescale = 0; prescale < 15; ++prescale) { + if (tmo_clk <= 0x7fff) + break; + tmo_clk >>= 1; + } + if (tmo_clk > 0x7fff) + tmo_clk = 0x7fff; + + /* Prescale divider (log2) */ + writel(prescale, idev->base + TIMER_CLOCK_DIV); + /* Timeout in divided clocks */ + writel(WT_EN | WT_VALUE(tmo_clk), idev->base + WAIT_TIMER_CONTROL); + + /* Mask all master interrupt bits */ + i2c_int_disable(idev, ~0); + + /* Interrupt enable */ + writel(0x01, idev->base + INTERRUPT_ENABLE); + + return 0; +} + +static int i2c_m_rd(const struct i2c_msg *msg) +{ + return (msg->flags & I2C_M_RD) != 0; +} + +static int i2c_m_ten(const struct i2c_msg *msg) +{ + return (msg->flags & I2C_M_TEN) != 0; +} + +static int i2c_m_recv_len(const struct i2c_msg *msg) +{ + return (msg->flags & I2C_M_RECV_LEN) != 0; +} + +/** + * axxia_i2c_empty_rx_fifo - Fetch data from RX FIFO and update SMBus block + * transfer length if this is the first byte of such a transfer. + */ +static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev) +{ + struct i2c_msg *msg = idev->msg; + size_t rx_fifo_avail = readl(idev->base + MST_RX_FIFO); + int bytes_to_transfer = min(rx_fifo_avail, msg->len - idev->msg_xfrd); + + while (bytes_to_transfer-- > 0) { + int c = readl(idev->base + MST_DATA); + + if (idev->msg_xfrd == 0 && i2c_m_recv_len(msg)) { + /* + * Check length byte for SMBus block read + */ + if (c <= 0 || c > I2C_SMBUS_BLOCK_MAX) { + idev->msg_err = -EPROTO; + i2c_int_disable(idev, ~0); + complete(&idev->msg_complete); + break; + } + msg->len = 1 + c; + writel(msg->len, idev->base + MST_RX_XFER); + } + msg->buf[idev->msg_xfrd++] = c; + } + + return 0; +} + +/** + * axxia_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer. + * @return: Number of bytes left to transfer. + */ +static int axxia_i2c_fill_tx_fifo(struct axxia_i2c_dev *idev) +{ + struct i2c_msg *msg = idev->msg; + size_t tx_fifo_avail = FIFO_SIZE - readl(idev->base + MST_TX_FIFO); + int bytes_to_transfer = min(tx_fifo_avail, msg->len - idev->msg_xfrd); + int ret = msg->len - idev->msg_xfrd - bytes_to_transfer; + + while (bytes_to_transfer-- > 0) + writel(msg->buf[idev->msg_xfrd++], idev->base + MST_DATA); + + return ret; +} + +static irqreturn_t axxia_i2c_isr(int irq, void *_dev) +{ + struct axxia_i2c_dev *idev = _dev; + u32 status; + + if (!(readl(idev->base + INTERRUPT_STATUS) & INT_MST)) + return IRQ_NONE; + + /* Read interrupt status bits */ + status = readl(idev->base + MST_INT_STATUS); + + if (!idev->msg) { + dev_warn(idev->dev, "unexpected interrupt\n"); + goto out; + } + + /* RX FIFO needs service? */ + if (i2c_m_rd(idev->msg) && (status & MST_STATUS_RFL)) + axxia_i2c_empty_rx_fifo(idev); + + /* TX FIFO needs service? */ + if (!i2c_m_rd(idev->msg) && (status & MST_STATUS_TFL)) { + if (axxia_i2c_fill_tx_fifo(idev) == 0) + i2c_int_disable(idev, MST_STATUS_TFL); + } + + if (status & MST_STATUS_SCC) { + /* Stop completed */ + i2c_int_disable(idev, ~0); + complete(&idev->msg_complete); + } else if (status & MST_STATUS_SNS) { + /* Transfer done */ + i2c_int_disable(idev, ~0); + if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len) + axxia_i2c_empty_rx_fifo(idev); + complete(&idev->msg_complete); + } else if (unlikely(status & MST_STATUS_ERR)) { + /* Transfer error */ + i2c_int_disable(idev, ~0); + if (status & MST_STATUS_AL) + idev->msg_err = -EAGAIN; + else if (status & MST_STATUS_NAK) + idev->msg_err = -ENXIO; + else + idev->msg_err = -EIO; + dev_dbg(idev->dev, "error %#x, addr=%#x rx=%u/%u tx=%u/%u\n", + status, + idev->msg->addr, + readl(idev->base + MST_RX_BYTES_XFRD), + readl(idev->base + MST_RX_XFER), + readl(idev->base + MST_TX_BYTES_XFRD), + readl(idev->base + MST_TX_XFER)); + complete(&idev->msg_complete); + } + +out: + /* Clear interrupt */ + writel(INT_MST, idev->base + INTERRUPT_STATUS); + + return IRQ_HANDLED; +} + +static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg) +{ + u32 int_mask = MST_STATUS_ERR | MST_STATUS_SNS; + u32 rx_xfer, tx_xfer; + u32 addr_1, addr_2; + int ret; + + if (msg->len > 255) { + dev_warn(idev->dev, "unsupported length %u\n", msg->len); + return -EINVAL; + } + + idev->msg = msg; + idev->msg_xfrd = 0; + idev->msg_err = 0; + reinit_completion(&idev->msg_complete); + + if (i2c_m_ten(msg)) { + /* 10-bit address + * addr_1: 5'b11110 | addr[9:8] | (R/nW) + * addr_2: addr[7:0] + */ + addr_1 = 0xF0 | ((msg->addr >> 7) & 0x06); + addr_2 = msg->addr & 0xFF; + } else { + /* 7-bit address + * addr_1: addr[6:0] | (R/nW) + * addr_2: dont care + */ + addr_1 = (msg->addr << 1) & 0xFF; + addr_2 = 0; + } + + if (i2c_m_rd(msg)) { + /* I2C read transfer */ + rx_xfer = i2c_m_recv_len(msg) ? I2C_SMBUS_BLOCK_MAX : msg->len; + tx_xfer = 0; + addr_1 |= 1; /* Set the R/nW bit of the address */ + } else { + /* I2C write transfer */ + rx_xfer = 0; + tx_xfer = msg->len; + } + + writel(rx_xfer, idev->base + MST_RX_XFER); + writel(tx_xfer, idev->base + MST_TX_XFER); + writel(addr_1, idev->base + MST_ADDR_1); + writel(addr_2, idev->base + MST_ADDR_2); + + if (i2c_m_rd(msg)) + int_mask |= MST_STATUS_RFL; + else if (axxia_i2c_fill_tx_fifo(idev) != 0) + int_mask |= MST_STATUS_TFL; + + /* Start manual mode */ + writel(CMD_MANUAL, idev->base + MST_COMMAND); + + i2c_int_enable(idev, int_mask); + + ret = wait_for_completion_timeout(&idev->msg_complete, + I2C_XFER_TIMEOUT); + + i2c_int_disable(idev, int_mask); + + if (readl(idev->base + MST_COMMAND) & CMD_BUSY) + dev_warn(idev->dev, "busy after xfer\n"); + + if (ret == 0) + idev->msg_err = -ETIMEDOUT; + + if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO) + axxia_i2c_init(idev); + + return idev->msg_err; +} + +static int axxia_i2c_stop(struct axxia_i2c_dev *idev) +{ + u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC; + int ret; + + reinit_completion(&idev->msg_complete); + + /* Issue stop */ + writel(0xb, idev->base + MST_COMMAND); + i2c_int_enable(idev, int_mask); + ret = wait_for_completion_timeout(&idev->msg_complete, + I2C_STOP_TIMEOUT); + i2c_int_disable(idev, int_mask); + if (ret == 0) + return -ETIMEDOUT; + + if (readl(idev->base + MST_COMMAND) & CMD_BUSY) + dev_warn(idev->dev, "busy after stop\n"); + + return 0; +} + +static int +axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) +{ + struct axxia_i2c_dev *idev = i2c_get_adapdata(adap); + int i; + int ret = 0; + + for (i = 0; ret == 0 && i < num; ++i) + ret = axxia_i2c_xfer_msg(idev, &msgs[i]); + + axxia_i2c_stop(idev); + + return ret ? : i; +} + +static u32 axxia_i2c_func(struct i2c_adapter *adap) +{ + u32 caps = (I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | + I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA); + return caps; +} + +static const struct i2c_algorithm axxia_i2c_algo = { + .master_xfer = axxia_i2c_xfer, + .functionality = axxia_i2c_func, +}; + +static int axxia_i2c_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct axxia_i2c_dev *idev = NULL; + struct resource *res; + void __iomem *base; + int irq; + int ret = 0; + + idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL); + if (!idev) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "missing interrupt resource\n"); + return irq; + } + + idev->i2c_clk = devm_clk_get(&pdev->dev, "i2c"); + if (IS_ERR(idev->i2c_clk)) { + dev_err(&pdev->dev, "missing clock\n"); + return PTR_ERR(idev->i2c_clk); + } + + idev->base = base; + idev->dev = &pdev->dev; + init_completion(&idev->msg_complete); + + of_property_read_u32(np, "clock-frequency", &idev->bus_clk_rate); + if (idev->bus_clk_rate == 0) + idev->bus_clk_rate = 100000; /* default clock rate */ + + ret = axxia_i2c_init(idev); + if (ret) { + dev_err(&pdev->dev, "failed to initialize\n"); + return ret; + } + + ret = devm_request_irq(&pdev->dev, irq, axxia_i2c_isr, 0, + pdev->name, idev); + if (ret) { + dev_err(&pdev->dev, "failed to claim IRQ%d\n", irq); + return ret; + } + + clk_prepare_enable(idev->i2c_clk); + + i2c_set_adapdata(&idev->adapter, idev); + strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name)); + idev->adapter.owner = THIS_MODULE; + idev->adapter.algo = &axxia_i2c_algo; + idev->adapter.dev.parent = &pdev->dev; + idev->adapter.dev.of_node = pdev->dev.of_node; + + platform_set_drvdata(pdev, idev); + + ret = i2c_add_adapter(&idev->adapter); + if (ret) { + dev_err(&pdev->dev, "failed to add adapter\n"); + return ret; + } + + return 0; +} + +static int axxia_i2c_remove(struct platform_device *pdev) +{ + struct axxia_i2c_dev *idev = platform_get_drvdata(pdev); + + clk_disable_unprepare(idev->i2c_clk); + i2c_del_adapter(&idev->adapter); + + return 0; +} + +/* Match table for of_platform binding */ +static const struct of_device_id axxia_i2c_of_match[] = { + { .compatible = "lsi,api2c", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, axxia_i2c_of_match); + +static struct platform_driver axxia_i2c_driver = { + .probe = axxia_i2c_probe, + .remove = axxia_i2c_remove, + .driver = { + .name = "axxia-i2c", + .of_match_table = axxia_i2c_of_match, + }, +}; + +module_platform_driver(axxia_i2c_driver); + +MODULE_DESCRIPTION("Axxia I2C Bus driver"); +MODULE_AUTHOR("Anders Berg <anders.berg@lsi.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c index 8ca5cbbcec91..875c22ae5400 100644 --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c @@ -96,7 +96,7 @@ static int ec_i2c_construct_message(u8 *buf, const struct i2c_msg i2c_msgs[], msg->addr_flags = i2c_msg->addr; if (i2c_msg->flags & I2C_M_TEN) - msg->addr_flags |= EC_I2C_FLAG_10BIT; + return -EINVAL; if (i2c_msg->flags & I2C_M_RD) { msg->addr_flags |= EC_I2C_FLAG_READ; @@ -220,7 +220,9 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[], } } - ec_i2c_construct_message(request, i2c_msgs, num, bus_num); + result = ec_i2c_construct_message(request, i2c_msgs, num, bus_num); + if (result) + goto exit; msg.version = 0; msg.command = EC_CMD_I2C_PASSTHRU; @@ -313,11 +315,20 @@ static int ec_i2c_remove(struct platform_device *dev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id cros_ec_i2c_of_match[] = { + { .compatible = "google,cros-ec-i2c-tunnel" }, + {}, +}; +MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match); +#endif + static struct platform_driver ec_i2c_tunnel_driver = { .probe = ec_i2c_probe, .remove = ec_i2c_remove, .driver = { .name = "cros-ec-i2c-tunnel", + .of_match_table = of_match_ptr(cros_ec_i2c_of_match), }, }; diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index bc8773333155..a7431150acf7 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -30,6 +30,7 @@ #include <linux/delay.h> #include <linux/i2c.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/errno.h> #include <linux/sched.h> #include <linux/err.h> @@ -41,6 +42,7 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/acpi.h> +#include <linux/platform_data/i2c-designware.h> #include "i2c-designware-core.h" static struct i2c_algorithm i2c_dw_algo = { @@ -79,10 +81,7 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[], static int dw_i2c_acpi_configure(struct platform_device *pdev) { struct dw_i2c_dev *dev = platform_get_drvdata(pdev); - bool fs_mode = dev->master_cfg & DW_IC_CON_SPEED_FAST; - - if (!ACPI_HANDLE(&pdev->dev)) - return -ENODEV; + const struct acpi_device_id *id; dev->adapter.nr = -1; dev->tx_fifo_depth = 32; @@ -92,14 +91,33 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) * Try to get SDA hold time and *CNT values from an ACPI method if * it exists for both supported speed modes. */ - dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, - fs_mode ? NULL : &dev->sda_hold_time); + dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, NULL); dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, - fs_mode ? &dev->sda_hold_time : NULL); + &dev->sda_hold_time); + + /* + * Provide a way for Designware I2C host controllers that are not + * based on Intel LPSS to specify their input clock frequency via + * id->driver_data. + */ + id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev); + if (id && id->driver_data) + clk_register_fixed_rate(&pdev->dev, dev_name(&pdev->dev), NULL, + CLK_IS_ROOT, id->driver_data); return 0; } +static void dw_i2c_acpi_unconfigure(struct platform_device *pdev) +{ + struct dw_i2c_dev *dev = platform_get_drvdata(pdev); + const struct acpi_device_id *id; + + id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev); + if (id && id->driver_data) + clk_unregister(dev->clk); +} + static const struct acpi_device_id dw_i2c_acpi_match[] = { { "INT33C2", 0 }, { "INT33C3", 0 }, @@ -107,6 +125,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = { { "INT3433", 0 }, { "80860F41", 0 }, { "808622C1", 0 }, + { "AMD0010", 133 * 1000 * 1000 }, { } }; MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); @@ -115,6 +134,7 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev) { return -ENODEV; } +static inline void dw_i2c_acpi_unconfigure(struct platform_device *pdev) { } #endif static int dw_i2c_probe(struct platform_device *pdev) @@ -122,7 +142,9 @@ static int dw_i2c_probe(struct platform_device *pdev) struct dw_i2c_dev *dev; struct i2c_adapter *adap; struct resource *mem; + struct dw_i2c_platform_data *pdata; int irq, r; + u32 clk_freq, ht = 0; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -145,21 +167,14 @@ static int dw_i2c_probe(struct platform_device *pdev) dev->irq = irq; platform_set_drvdata(pdev, dev); - dev->clk = devm_clk_get(&pdev->dev, NULL); - dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; - - if (IS_ERR(dev->clk)) - return PTR_ERR(dev->clk); - clk_prepare_enable(dev->clk); - - if (pdev->dev.of_node) { - u32 ht = 0; - u32 ic_clk = dev->get_clk_rate_khz(dev); + /* fast mode by default because of legacy reasons */ + clk_freq = 400000; + if (ACPI_COMPANION(&pdev->dev)) { + dw_i2c_acpi_configure(pdev); + } else if (pdev->dev.of_node) { of_property_read_u32(pdev->dev.of_node, "i2c-sda-hold-time-ns", &ht); - dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000, - 1000000); of_property_read_u32(pdev->dev.of_node, "i2c-sda-falling-time-ns", @@ -167,6 +182,21 @@ static int dw_i2c_probe(struct platform_device *pdev) of_property_read_u32(pdev->dev.of_node, "i2c-scl-falling-time-ns", &dev->scl_falling_time); + + of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &clk_freq); + + /* Only standard mode at 100kHz and fast mode at 400kHz + * are supported. + */ + if (clk_freq != 100000 && clk_freq != 400000) { + dev_err(&pdev->dev, "Only 100kHz and 400kHz supported"); + return -EINVAL; + } + } else { + pdata = dev_get_platdata(&pdev->dev); + if (pdata) + clk_freq = pdata->i2c_scl_freq; } dev->functionality = @@ -176,12 +206,27 @@ static int dw_i2c_probe(struct platform_device *pdev) I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK; - dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | - DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; + if (clk_freq == 100000) + dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | + DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_STD; + else + dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | + DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; - /* Try first if we can configure the device from ACPI */ - r = dw_i2c_acpi_configure(pdev); - if (r) { + dev->clk = devm_clk_get(&pdev->dev, NULL); + dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; + if (IS_ERR(dev->clk)) + return PTR_ERR(dev->clk); + clk_prepare_enable(dev->clk); + + if (!dev->sda_hold_time && ht) { + u32 ic_clk = dev->get_clk_rate_khz(dev); + + dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000, + 1000000); + } + + if (!dev->tx_fifo_depth) { u32 param1 = i2c_dw_read_comp_param(dev); dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1; @@ -237,6 +282,9 @@ static int dw_i2c_remove(struct platform_device *pdev) pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); + if (ACPI_COMPANION(&pdev->dev)) + dw_i2c_acpi_unconfigure(pdev); + return 0; } diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index 28073f1d6d47..81e6263cd7da 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -83,7 +83,6 @@ #define HSI2C_INT_TX_ALMOSTEMPTY_EN (1u << 0) #define HSI2C_INT_RX_ALMOSTFULL_EN (1u << 1) #define HSI2C_INT_TRAILING_EN (1u << 6) -#define HSI2C_INT_I2C_EN (1u << 9) /* I2C_INT_STAT Register bits */ #define HSI2C_INT_TX_ALMOSTEMPTY (1u << 0) @@ -95,6 +94,17 @@ #define HSI2C_INT_TRAILING (1u << 6) #define HSI2C_INT_I2C (1u << 9) +#define HSI2C_INT_TRANS_DONE (1u << 7) +#define HSI2C_INT_TRANS_ABORT (1u << 8) +#define HSI2C_INT_NO_DEV_ACK (1u << 9) +#define HSI2C_INT_NO_DEV (1u << 10) +#define HSI2C_INT_TIMEOUT (1u << 11) +#define HSI2C_INT_I2C_TRANS (HSI2C_INT_TRANS_DONE | \ + HSI2C_INT_TRANS_ABORT | \ + HSI2C_INT_NO_DEV_ACK | \ + HSI2C_INT_NO_DEV | \ + HSI2C_INT_TIMEOUT) + /* I2C_FIFO_STAT Register bits */ #define HSI2C_RX_FIFO_EMPTY (1u << 24) #define HSI2C_RX_FIFO_FULL (1u << 23) @@ -143,6 +153,8 @@ #define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000)) +#define HSI2C_EXYNOS7 BIT(0) + struct exynos5_i2c { struct i2c_adapter adap; unsigned int suspended:1; @@ -192,6 +204,7 @@ struct exynos5_i2c { */ struct exynos_hsi2c_variant { unsigned int fifo_depth; + unsigned int hw; }; static const struct exynos_hsi2c_variant exynos5250_hsi2c_data = { @@ -202,6 +215,11 @@ static const struct exynos_hsi2c_variant exynos5260_hsi2c_data = { .fifo_depth = 16, }; +static const struct exynos_hsi2c_variant exynos7_hsi2c_data = { + .fifo_depth = 16, + .hw = HSI2C_EXYNOS7, +}; + static const struct of_device_id exynos5_i2c_match[] = { { .compatible = "samsung,exynos5-hsi2c", @@ -212,6 +230,9 @@ static const struct of_device_id exynos5_i2c_match[] = { }, { .compatible = "samsung,exynos5260-hsi2c", .data = &exynos5260_hsi2c_data + }, { + .compatible = "samsung,exynos7-hsi2c", + .data = &exynos7_hsi2c_data }, {}, }; MODULE_DEVICE_TABLE(of, exynos5_i2c_match); @@ -256,13 +277,24 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, int mode) i2c->hs_clock : i2c->fs_clock; /* + * In case of HSI2C controller in Exynos5 series * FPCLK / FI2C = * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE + * + * In case of HSI2C controllers in Exynos7 series + * FPCLK / FI2C = + * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + FLT_CYCLE + * |