Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS update from Ralf Baechle:
 "This is the MIPS update for 3.7.

  A fair chunk of them are platform updates to the Cavium Octeon SOC
  (which involves machine generated header files of considerable size),
  Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx
  platforms.

  Support for the commercial MIPS simulator MIPSsim has been removed as
  MIPS Technologies is shifting away from this product and Qemu is
  offering various more powerful platforms.  The generic MIPS code can
  now also probe for no-execute / write-only TLB features implemented
  without the full SmartMIPS extension as permitted by the latest MIPS
  processor architecture.  Lots of small changes to generic code."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits)
  MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs
  MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
  MIPS: BCM63XX: Properly handle mac address octet overflow
  MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user.
  MIPS: Replace `-' in defconfig filename wth `_' for consistency.
  MIPS: Wire kcmp syscall.
  MIPS: MIPSsim: Remove the MIPSsim platform.
  MIPS: NOTIFY_RESUME is not needed in TIF masks
  MIPS: Merge the identical "return from syscall" per-ABI code
  MIPS: Unobfuscate _TIF..._MASK
  MIPS: Prevent hitting do_notify_resume() with !user_mode(regs).
  MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'.
  MIPS: Add base architecture support for RI and XI.
  MIPS: Optimise TLB handlers for MIPS32/64 R2 cores.
  MIPS: uasm: Add INS and EXT instructions.
  MIPS: Avoid pipeline stalls on some MIPS32R2 cores.
  MIPS: Make VPE count to be one-based.
  MIPS: Add new end of interrupt functionality for GIC.
  MIPS: Add EIC support for GIC.
  MIPS: Code clean-ups for the GIC.
  ...

6 files changed, 1804 insertions, 0 deletions

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 33e3df9e39ca..7bf914df6e91 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -68,10 +68,21 @@ config PINCTRL_IMX6Q
 	help
 	  Say Y here to enable the imx6q pinctrl driver
 
+config PINCTRL_LANTIQ
+	bool
+	depends on LANTIQ
+	select PINMUX
+	select PINCONF
+
 config PINCTRL_PXA3xx
 	bool
 	select PINMUX
 
+config PINCTRL_FALCON
+	bool
+	depends on SOC_FALCON
+	depends on PINCTRL_LANTIQ
+
 config PINCTRL_MMP2
 	bool "MMP2 pin controller driver"
 	depends on ARCH_MMP
@@ -199,6 +210,11 @@ config PINCTRL_ARMADA_XP
 
 source "drivers/pinctrl/spear/Kconfig"
 
+config PINCTRL_XWAY
+	bool
+	depends on SOC_TYPE_XWAY
+	depends on PINCTRL_LANTIQ
+
 endmenu
 
 endif
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f162e0196300..f395ba5cec25 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_PINCTRL_IMX51)	+= pinctrl-imx51.o
 obj-$(CONFIG_PINCTRL_IMX53)	+= pinctrl-imx53.o
 obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6q.o
 obj-$(CONFIG_PINCTRL_PXA3xx)	+= pinctrl-pxa3xx.o
+obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
 obj-$(CONFIG_PINCTRL_MMP2)	+= pinctrl-mmp2.o
 obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o
@@ -40,5 +41,7 @@ obj-$(CONFIG_PINCTRL_DOVE)	+= pinctrl-dove.o
 obj-$(CONFIG_PINCTRL_KIRKWOOD)	+= pinctrl-kirkwood.o
 obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o
 obj-$(CONFIG_PINCTRL_ARMADA_XP)  += pinctrl-armada-xp.o
+obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
+obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
new file mode 100644
index 000000000000..ee7305903470
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-falcon.c
@@ -0,0 +1,468 @@
+/*
+ *  linux/drivers/pinctrl/pinmux-falcon.c
+ *  based on linux/drivers/pinctrl/pinmux-pxa910.c
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-lantiq.h"
+
+#include <lantiq_soc.h>
+
+/* Multiplexer Control Register */
+#define LTQ_PADC_MUX(x)         (x * 0x4)
+/* Pull Up Enable Register */
+#define LTQ_PADC_PUEN		0x80
+/* Pull Down Enable Register */
+#define LTQ_PADC_PDEN		0x84
+/* Slew Rate Control Register */
+#define LTQ_PADC_SRC		0x88
+/* Drive Current Control Register */
+#define LTQ_PADC_DCC		0x8C
+/* Pad Control Availability Register */
+#define LTQ_PADC_AVAIL          0xF0
+
+#define pad_r32(p, reg)		ltq_r32(p + reg)
+#define pad_w32(p, val, reg)	ltq_w32(val, p + reg)
+#define pad_w32_mask(c, clear, set, reg) \
+		pad_w32(c, (pad_r32(c, reg) & ~(clear)) | (set), reg)
+
+#define pad_getbit(m, r, p)	(!!(ltq_r32(m + r) & (1 << p)))
+
+#define PORTS			5
+#define PINS			32
+#define PORT(x)                 (x / PINS)
+#define PORT_PIN(x)             (x % PINS)
+
+#define MFP_FALCON(a, f0, f1, f2, f3)		\
+{						\
+	.name = #a,				\
+	.pin = a,				\
+	.func = {				\
+		FALCON_MUX_##f0,		\
+		FALCON_MUX_##f1,		\
+		FALCON_MUX_##f2,		\
+		FALCON_MUX_##f3,		\
+	},					\
+}
+
+#define GRP_MUX(a, m, p)	\
+{				\
+	.name = a,		\
+	.mux = FALCON_MUX_##m,	\
+	.pins = p,		\
+	.npins = ARRAY_SIZE(p),	\
+}
+
+enum falcon_mux {
+	FALCON_MUX_GPIO = 0,
+	FALCON_MUX_RST,
+	FALCON_MUX_NTR,
+	FALCON_MUX_MDIO,
+	FALCON_MUX_LED,
+	FALCON_MUX_SPI,
+	FALCON_MUX_ASC,
+	FALCON_MUX_I2C,
+	FALCON_MUX_HOSTIF,
+	FALCON_MUX_SLIC,
+	FALCON_MUX_JTAG,
+	FALCON_MUX_PCM,
+	FALCON_MUX_MII,
+	FALCON_MUX_PHY,
+	FALCON_MUX_NONE = 0xffff,
+};
+
+static struct pinctrl_pin_desc falcon_pads[PORTS * PINS];
+static int pad_count[PORTS];
+
+static void lantiq_load_pin_desc(struct pinctrl_pin_desc *d, int bank, int len)
+{
+	int base = bank * PINS;
+	int i;
+
+	for (i = 0; i < len; i++) {
+		/* strlen("ioXYZ") + 1 = 6 */
+		char *name = kzalloc(6, GFP_KERNEL);
+		snprintf(name, 6, "io%d", base + i);
+		d[i].number = base + i;
+		d[i].name = name;
+	}
+	pad_count[bank] = len;
+}
+
+static struct ltq_mfp_pin falcon_mfp[] = {
+	/*	pin		f0	f1	f2	f3 */
+	MFP_FALCON(GPIO0,	RST,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO1,	GPIO,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO2,	GPIO,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO3,	GPIO,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO4,	NTR,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO5,	NTR,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO6,	RST,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO7,	MDIO,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO8,	MDIO,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO9,	LED,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO10,	LED,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO11,	LED,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO12,	LED,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO13,	LED,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO14,	LED,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO32,	ASC,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO33,	ASC,	GPIO,   NONE,   NONE),
+	MFP_FALCON(GPIO34,	SPI,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO35,	SPI,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO36,	SPI,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO37,	SPI,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO38,	SPI,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO39,	I2C,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO40,	I2C,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO41,	HOSTIF,	GPIO,	HOSTIF,	JTAG),
+	MFP_FALCON(GPIO42,	HOSTIF,	GPIO,	HOSTIF,	NONE),
+	MFP_FALCON(GPIO43,	SLIC,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO44,	SLIC,	GPIO,	PCM,	ASC),
+	MFP_FALCON(GPIO45,	SLIC,	GPIO,	PCM,	ASC),
+	MFP_FALCON(GPIO64,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO65,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO66,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO67,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO68,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO69,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO70,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO71,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO72,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO73,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO74,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO75,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO76,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO77,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO78,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO79,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO80,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO81,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO82,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO83,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO84,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO85,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO86,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO87,	MII,	GPIO,	NONE,	NONE),
+	MFP_FALCON(GPIO88,	PHY,	GPIO,	NONE,	NONE),
+};
+
+static const unsigned pins_por[] = {GPIO0};
+static const unsigned pins_ntr[] = {GPIO4};
+static const unsigned pins_ntr8k[] = {GPIO5};
+static const unsigned pins_hrst[] = {GPIO6};
+static const unsigned pins_mdio[] = {GPIO7, GPIO8};
+static const unsigned pins_bled[] = {GPIO7, GPIO10, GPIO11,
+					GPIO12, GPIO13, GPIO14};
+static const unsigned pins_asc0[] = {GPIO32, GPIO33};
+static const unsigned pins_spi[] = {GPIO34, GPIO35, GPIO36};
+static const unsigned pins_spi_cs0[] = {GPIO37};
+static const unsigned pins_spi_cs1[] = {GPIO38};
+static const unsigned pins_i2c[] = {GPIO39, GPIO40};
+static const unsigned pins_jtag[] = {GPIO41};
+static const unsigned pins_slic[] = {GPIO43, GPIO44, GPIO45};
+static const unsigned pins_pcm[] = {GPIO44, GPIO45};
+static const unsigned pins_asc1[] = {GPIO44, GPIO45};
+
+static struct ltq_pin_group falcon_grps[] = {
+	GRP_MUX("por", RST, pins_por),
+	GRP_MUX("ntr", NTR, pins_ntr),
+	GRP_MUX("ntr8k", NTR, pins_ntr8k),
+	GRP_MUX("hrst", RST, pins_hrst),
+	GRP_MUX("mdio", MDIO, pins_mdio),
+	GRP_MUX("bootled", LED, pins_bled),
+	GRP_MUX("asc0", ASC, pins_asc0),
+	GRP_MUX("spi", SPI, pins_spi),
+	GRP_MUX("spi cs0", SPI, pins_spi_cs0),
+	GRP_MUX("spi cs1", SPI, pins_spi_cs1),
+	GRP_MUX("i2c", I2C, pins_i2c),
+	GRP_MUX("jtag", JTAG, pins_jtag),
+	GRP_MUX("slic", SLIC, pins_slic),
+	GRP_MUX("pcm", PCM, pins_pcm),
+	GRP_MUX("asc1", ASC, pins_asc1),
+};
+
+static const char * const ltq_rst_grps[] = {"por", "hrst"};
+static const char * const ltq_ntr_grps[] = {"ntr", "ntr8k"};
+static const char * const ltq_mdio_grps[] = {"mdio"};
+static const char * const ltq_bled_grps[] = {"bootled"};
+static const char * const ltq_asc_grps[] = {"asc0", "asc1"};
+static const char * const ltq_spi_grps[] = {"spi", "spi cs0", "spi cs1"};
+static const char * const ltq_i2c_grps[] = {"i2c"};
+static const char * const ltq_jtag_grps[] = {"jtag"};
+static const char * const ltq_slic_grps[] = {"slic"};
+static const char * const ltq_pcm_grps[] = {"pcm"};
+
+static struct ltq_pmx_func falcon_funcs[] = {
+	{"rst",		ARRAY_AND_SIZE(ltq_rst_grps)},
+	{"ntr",		ARRAY_AND_SIZE(ltq_ntr_grps)},
+	{"mdio",	ARRAY_AND_SIZE(ltq_mdio_grps)},
+	{"led",		ARRAY_AND_SIZE(ltq_bled_grps)},
+	{"asc",		ARRAY_AND_SIZE(ltq_asc_grps)},
+	{"spi",		ARRAY_AND_SIZE(ltq_spi_grps)},
+	{"i2c",		ARRAY_AND_SIZE(ltq_i2c_grps)},
+	{"jtag",	ARRAY_AND_SIZE(ltq_jtag_grps)},
+	{"slic",	ARRAY_AND_SIZE(ltq_slic_grps)},
+	{"pcm",		ARRAY_AND_SIZE(ltq_pcm_grps)},
+};
+
+
+
+
+/* ---------  pinconf related code --------- */
+static int falcon_pinconf_group_get(struct pinctrl_dev *pctrldev,
+				unsigned group, unsigned long *config)
+{
+	return -ENOTSUPP;
+}
+
+static int falcon_pinconf_group_set(struct pinctrl_dev *pctrldev,
+				unsigned group, unsigned long config)
+{
+	return -ENOTSUPP;
+}
+
+static int falcon_pinconf_get(struct pinctrl_dev *pctrldev,
+				unsigned pin, unsigned long *config)
+{
+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+	enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(*config);
+	void __iomem *mem = info->membase[PORT(pin)];
+
+	switch (param) {
+	case LTQ_PINCONF_PARAM_DRIVE_CURRENT:
+		*config = LTQ_PINCONF_PACK(param,
+			!!pad_getbit(mem, LTQ_PADC_DCC, PORT_PIN(pin)));
+		break;
+
+	case LTQ_PINCONF_PARAM_SLEW_RATE:
+		*config = LTQ_PINCONF_PACK(param,
+			!!pad_getbit(mem, LTQ_PADC_SRC, PORT_PIN(pin)));
+		break;
+
+	case LTQ_PINCONF_PARAM_PULL:
+		if (pad_getbit(mem, LTQ_PADC_PDEN, PORT_PIN(pin)))
+			*config = LTQ_PINCONF_PACK(param, 1);
+		else if (pad_getbit(mem, LTQ_PADC_PUEN, PORT_PIN(pin)))
+			*config = LTQ_PINCONF_PACK(param, 2);
+		else
+			*config = LTQ_PINCONF_PACK(param, 0);
+
+		break;
+
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static int falcon_pinconf_set(struct pinctrl_dev *pctrldev,
+			unsigned pin, unsigned long config)
+{
+	enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config);
+	int arg = LTQ_PINCONF_UNPACK_ARG(config);
+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+	void __iomem *mem = info->membase[PORT(pin)];
+	u32 reg;
+
+	switch (param) {
+	case LTQ_PINCONF_PARAM_DRIVE_CURRENT:
+		reg = LTQ_PADC_DCC;
+		break;
+
+	case LTQ_PINCONF_PARAM_SLEW_RATE:
+		reg = LTQ_PADC_SRC;
+		break;
+
+	case LTQ_PINCONF_PARAM_PULL:
+		if (arg == 1)
+			reg = LTQ_PADC_PDEN;
+		else
+			reg = LTQ_PADC_PUEN;
+		break;
+
+	default:
+		pr_err("%s: Invalid config param %04x\n",
+		pinctrl_dev_get_name(pctrldev), param);
+		return -ENOTSUPP;
+	}
+
+	pad_w32(mem, BIT(PORT_PIN(pin)), reg);
+	if (!(pad_r32(mem, reg) & BIT(PORT_PIN(pin))))
+		return -ENOTSUPP;
+	return 0;
+}
+
+static void falcon_pinconf_dbg_show(struct pinctrl_dev *pctrldev,
+			struct seq_file *s, unsigned offset)
+{
+}
+
+static void falcon_pinconf_group_dbg_show(struct pinctrl_dev *pctrldev,
+			struct seq_file *s, unsigned selector)
+{
+}
+
+struct pinconf_ops falcon_pinconf_ops = {
+	.pin_config_get			= falcon_pinconf_get,
+	.pin_config_set			= falcon_pinconf_set,
+	.pin_config_group_get		= falcon_pinconf_group_get,
+	.pin_config_group_set		= falcon_pinconf_group_set,
+	.pin_config_dbg_show		= falcon_pinconf_dbg_show,
+	.pin_config_group_dbg_show	= falcon_pinconf_group_dbg_show,
+};
+
+static struct pinctrl_desc falcon_pctrl_desc = {
+	.owner		= THIS_MODULE,
+	.pins		= falcon_pads,
+	.confops	= &falcon_pinconf_ops,
+};
+
+static inline int falcon_mux_apply(struct pinctrl_dev *pctrldev,
+			int mfp, int mux)
+{
+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+	int port = PORT(info->mfp[mfp].pin);
+
+	if ((port >= PORTS) || (!info->membase[port]))
+		return -ENODEV;
+
+	pad_w32(info->membase[port], mux,
+		LTQ_PADC_MUX(PORT_PIN(info->mfp[mfp].pin)));
+	return 0;
+}
+
+static const struct ltq_cfg_param falcon_cfg_params[] = {
+	{"lantiq,pull",			LTQ_PINCONF_PARAM_PULL},
+	{"lantiq,drive-current",	LTQ_PINCONF_PARAM_DRIVE_CURRENT},
+	{"lantiq,slew-rate",		LTQ_PINCONF_PARAM_SLEW_RATE},
+};
+
+static struct ltq_pinmux_info falcon_info = {
+	.desc		= &falcon_pctrl_desc,
+	.apply_mux	= falcon_mux_apply,
+};
+
+
+
+
+/* --------- register the pinctrl layer --------- */
+
+int pinctrl_falcon_get_range_size(int id)
+{
+	u32 avail;
+
+	if ((id >= PORTS) || (!falcon_info.membase[id]))
+		return -EINVAL;
+
+	avail = pad_r32(falcon_info.membase[id], LTQ_PADC_AVAIL);
+
+	return fls(avail);
+}
+
+void pinctrl_falcon_add_gpio_range(struct pinctrl_gpio_range *range)
+{
+	pinctrl_add_gpio_range(falcon_info.pctrl, range);
+}
+
+static int pinctrl_falcon_probe(struct platform_device *pdev)
+{
+	struct device_node *np;
+	int pad_count = 0;
+	int ret = 0;
+
+	/* load and remap the pad resources of the different banks */
+	for_each_compatible_node(np, NULL, "lantiq,pad-falcon") {
+		struct platform_device *ppdev = of_find_device_by_node(np);
+		const __be32 *bank = of_get_property(np, "lantiq,bank", NULL);
+		struct resource res;
+		u32 avail;
+		int pins;
+
+		if (!ppdev) {
+			dev_err(&pdev->dev, "failed to find pad pdev\n");
+			continue;
+		}
+		if (!bank || *bank >= PORTS)
+			continue;
+		if (of_address_to_resource(np, 0, &res))
+			continue;
+		falcon_info.clk[*bank] = clk_get(&ppdev->dev, NULL);
+		if (IS_ERR(falcon_info.clk[*bank])) {
+			dev_err(&ppdev->dev, "failed to get clock\n");
+			return PTR_ERR(falcon_info.clk[*bank]);
+		}
+		falcon_info.membase[*bank] =
+				devm_request_and_ioremap(&pdev->dev, &res);
+		if (!falcon_info.membase[*bank]) {
+			dev_err(&pdev->dev,
+				"Failed to remap memory for bank %d\n",
+				*bank);
+			return -ENOMEM;
+		}
+		avail = pad_r32(falcon_info.membase[*bank],
+					LTQ_PADC_AVAIL);
+		pins = fls(avail);
+		lantiq_load_pin_desc(&falcon_pads[pad_count], *bank, pins);
+		pad_count += pins;
+		clk_enable(falcon_info.clk[*bank]);
+		dev_dbg(&pdev->dev, "found %s with %d pads\n",
+				res.name, pins);
+	}
+	dev_dbg(&pdev->dev, "found a total of %d pads\n", pad_count);
+	falcon_pctrl_desc.name	= dev_name(&pdev->dev);
+	falcon_pctrl_desc.npins	= pad_count;
+
+	falcon_info.mfp		= falcon_mfp;
+	falcon_info.num_mfp	= ARRAY_SIZE(falcon_mfp);
+	falcon_info.grps	= falcon_grps;
+	falcon_info.num_grps	= ARRAY_SIZE(falcon_grps);
+	falcon_info.funcs	= falcon_funcs;
+	falcon_info.num_funcs	= ARRAY_SIZE(falcon_funcs);
+
+	ret = ltq_pinctrl_register(pdev, &falcon_info);
+	if (!ret)
+		dev_info(&pdev->dev, "Init done\n");
+	return ret;
+}
+
+static const struct of_device_id falcon_match[] = {
+	{ .compatible = "lantiq,pinctrl-falcon" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, falcon_match);
+
+static struct platform_driver pinctrl_falcon_driver = {
+	.probe = pinctrl_falcon_probe,
+	.driver = {
+		.name = "pinctrl-falcon",
+		.owner = THIS_MODULE,
+		.of_match_table = falcon_match,
+	},
+};
+
+int __init pinctrl_falcon_init(void)
+{
+	return platform_driver_register(&pinctrl_falcon_driver);
+}
+
+core_initcall_sync(pinctrl_falcon_init);
diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c
new file mode 100644
index 000000000000..07ba7682cf22
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-lantiq.c
@@ -0,0 +1,342 @@
+/*
+ *  linux/drivers/pinctrl/pinctrl-lantiq.c
+ *  based on linux/drivers/pinctrl/pinctrl-pxa3xx.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ *
+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include "pinctrl-lantiq.h"
+
+static int ltq_get_group_count(struct pinctrl_dev *pctrldev)
+{
+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+	return info->num_grps;
+}
+
+static const char *ltq_get_group_name(struct pinctrl_dev *pctrldev,
+					 unsigned selector)
+{
+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+	if (selector >= info->num_grps)
+		return NULL;
+	return info->grps[selector].name;
+}
+
+static int ltq_get_group_pins(struct pinctrl_dev *pctrldev,
+				 unsigned selector,
+				 const unsigned **pins,
+				 unsigned *num_pins)
+{
+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+	if (selector >= info->num_grps)
+		return -EINVAL;
+	*pins = info->grps[selector].pins;
+	*num_pins = info->grps[selector].npins;
+	return 0;
+}
+
+void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+				struct pinctrl_map *map, unsigned num_maps)
+{
+	int i;
+
+	for (i = 0; i < num_maps; i++)
+		if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
+			kfree(map[i].data.configs.configs);
+	kfree(map);
+}
+
+static void ltq_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
+					struct seq_file *s,
+					unsigned offset)
+{
+	seq_printf(s, " %s", dev_name(pctldev->dev));
+}
+
+static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+				struct device_node *np,
+				struct pinctrl_map **map)
+{
+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
+	unsigned long configs[3];
+	unsigned num_configs = 0;
+	struct property *prop;
+	const char *group, *pin;
+	const char *function;
+	int ret, i;
+
+	ret = of_property_read_string(np, "lantiq,function", &function);
+	if (!ret) {
+		of_property_for_each_string(np, "lantiq,groups", prop, group) {
+			(*map)->type = PIN_MAP_TYPE_MUX_GROUP;
+			(*map)->name = function;
+			(*map)->data.mux.group = group;
+			(*map)->data.mux.function = function;
+			(*map)++;
+		}
+		if (of_find_property(np, "lantiq,pins", NULL))
+			dev_err(pctldev->dev,
+				"%s mixes pins and groups settings\n",
+				np->name);
+		return 0;
+	}
+
+	for (i = 0; i < info->num_params; i++) {
+		u32 val;
+		int ret = of_property_read_u32(np,
+				info->params[i].property, &val);
+		if (!ret)
+			configs[num_configs++] =
+				LTQ_PINCONF_PACK(info->params[i].param,
+				val);
+	}
+
+	if (!num_configs)
+		return -EINVAL;
+
+	of_property_for_each_string(np, "lantiq,pins", prop, pin) {
+		(*map)->data.configs.configs = kmemdup(configs,
+					num_configs * sizeof(unsigned long),
+					GFP_KERNEL);
+		(*map)->type = PIN_MAP_TYPE_CONFIGS_PIN;
+		(*map)->name = pin;
+		(*map)->data.configs.group_or_pin = pin;
+		(*map)->data.configs.num_configs = num_configs;
+		(*map)++;
+	}
+	return 0;
+}
+
+static int ltq_pinctrl_dt_subnode_size(struct device_node *np)
+{
+	int ret;
+
+	ret = of_property_count_strings(np, "lantiq,groups");
+	if (ret < 0)
+		ret = of_property_count_strings(np, "lantiq,pins");
+	return ret;
+}
+
+int ltq_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+				struct device_node *np_config,
+				struct pinctrl_map **map,
+				unsigned *num_maps)
+{
+	struct pinctrl_map *tmp;
+	struct device_node *np;
+	int ret;
+
+	*num_maps = 0;
+	for_each_child_of_node(np_config, np)
+		*num_maps += ltq_pinctrl_dt_subnode_size(np);
+	*map = kzalloc(*num_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
+	if (!*map)
+		return -ENOMEM;
+	tmp = *map;
+
+	for_each_child_of_node(np_config, np) {
+		ret = ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp);
+		if (ret < 0) {
+			ltq_pinctrl_dt_free_map(pctldev, *map, *num_maps);
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static struct pinctrl_ops ltq_pctrl_ops = {
+	.get_groups_count	= ltq_get_group_count,
+	.get_group_name		= ltq_get_group_name,
+	.get_group_pins		= ltq_get_group_pins,
+	.pin_dbg_show		= ltq_pinctrl_pin_dbg_show,
+	.dt_node_to_map		= ltq_pinctrl_dt_node_to_map,
+	.dt_free_map		= ltq_pinctrl_dt_free_map,
+};
+
+static int ltq_pmx_func_count(struct pinctrl_dev *pctrldev)
+{
+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+
+	return info->num_funcs;
+}
+
+static const char *ltq_pmx_func_name(struct pinctrl_dev *pctrldev,
+					 unsigned selector)
+{
+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+
+	if (selector >= info->num_funcs)
+		return NULL;
+
+	return info->funcs[selector].name;
+}
+
+static int ltq_pmx_get_groups(struct pinctrl_dev *pctrldev,
+				unsigned func,
+				const char * const **groups,
+				unsigned * const num_groups)
+{
+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+
+	*groups = info->funcs[func].groups;
+	*num_groups = info->funcs[func].num_groups;
+
+	return 0;
+}
+
+/* Return function number. If failure, return negative value. */
+static int match_mux(const struct ltq_mfp_pin *mfp, unsigned mux)
+{
+	int i;
+	for (i = 0; i < LTQ_MAX_MUX; i++) {
+		if (mfp->func[i] == mux)
+			break;
+	}
+	if (i >= LTQ_MAX_MUX)
+		return -EINVAL;
+	return i;
+}
+
+/* dont assume .mfp is linearly mapped. find the mfp with the correct .pin */
+static int match_mfp(const struct ltq_pinmux_info *info, int pin)
+{
+	int i;
+	for (i = 0; i < info->num_mfp; i++) {
+		if (info->mfp[i].pin == pin)
+			return i;
+	}
+	return -1;
+}
+
+/* check whether current pin configuration is valid. Negative for failure */
+static int match_group_mux(const struct ltq_pin_group *grp,
+			   const struct ltq_pinmux_info *info,
+			   unsigned mux)
+{
+	int i, pin, ret = 0;
+	for (i = 0; i < grp->npins; i++) {
+		pin = match_mfp(info, grp->pins[i]);
+		if (pin < 0) {
+			dev_err(info->dev, "could not find mfp for pin %d\n",
+				grp->pins[i]);
+			return -EINVAL;
+		}
+		ret = match_mux(&info->mfp[pin], mux);
+		if (ret < 0) {
+			dev_err(info->dev, "Can't find mux %d on pin%d\n",
+				mux, pin);
+			break;
+		}
+	}
+	return ret;
+}
+
+static int ltq_pmx_enable(struct pinctrl_dev *pctrldev,
+				unsigned func,
+				unsigned group)
+{
+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+	const struct ltq_pin_group *pin_grp = &info->grps[group];
+	int i, pin, pin_func, ret;
+
+	if (!pin_grp->npins ||
+		(match_group_mux(pin_grp, info, pin_grp->mux) < 0)) {
+		dev_err(info->dev, "Failed to set the pin group: %s\n",
+			info->grps[group].name);
+		return -EINVAL;
+	}
+	for (i = 0; i < pin_grp->npins; i++) {
+		pin = match_mfp(info, pin_grp->pins[i]);
+		if (pin < 0) {
+			dev_err(info->dev, "could not find mfp for pin %d\n",
+				pin_grp->pins[i]);
+			return -EINVAL;
+		}
+		pin_func = match_mux(&info->mfp[pin], pin_grp->mux);
+		ret = info->apply_mux(pctrldev, pin, pin_func);
+		if (ret) {
+			dev_err(info->dev,
+				"failed to apply mux %d for pin %d\n",
+				pin_func, pin);
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static void ltq_pmx_disable(struct pinctrl_dev *pctrldev,
+				unsigned func,
+				unsigned group)
+{
+	/*
+	 * Nothing to do here. However, pinconf_check_ops() requires this
+	 * callback to be defined.
+	 */
+}
+
+static int ltq_pmx_gpio_request_enable(struct pinctrl_dev *pctrldev,
+				struct pinctrl_gpio_range *range,
+				unsigned pin)
+{
+	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+	int mfp = match_mfp(info, pin + (range->id * 32));
+	int pin_func;
+
+	if (mfp < 0) {
+		dev_err(info->dev, "could not find mfp for pin %d\n", pin);
+		return -EINVAL;
+	}
+
+	pin_func = match_mux(&info->mfp[mfp], 0);
+	if (pin_func < 0) {
+		dev_err(info->dev, "No GPIO function on pin%d\n", mfp);
+		return -EINVAL;
+	}
+
+	return info->apply_mux(pctrldev, mfp, pin_func);
+}
+
+static struct pinmux_ops ltq_pmx_ops = {
+	.get_functions_count	= ltq_pmx_func_count,
+	.get_function_name	= ltq_pmx_func_name,
+	.get_function_groups	= ltq_pmx_get_groups,
+	.enable			= ltq_pmx_enable,
+	.disable		= ltq_pmx_disable,
+	.gpio_request_enable	= ltq_pmx_gpio_request_enable,
+};
+
+/*
+ * allow different socs to register with the generic part of the lanti
+ * pinctrl code
+ */
+int ltq_pinctrl_register(struct platform_device *pdev,
+				struct ltq_pinmux_info *info)
+{
+	struct pinctrl_desc *desc;
+
+	if (!info)
+		return -EINVAL;
+	desc = info->desc;
+	desc->pctlops = &ltq_pctrl_ops;
+	desc->pmxops = &ltq_pmx_ops;
+	info->dev = &pdev->dev;
+
+	info->pctrl = pinctrl_register(desc, &pdev->dev, info);
+	if (!info->pctrl) {
+		dev_err(&pdev->dev, "failed to register LTQ pinmux driver\n");
+		return -EINVAL;
+	}
+	platform_set_drvdata(pdev, info);
+	return 0;
+}
diff --git a/drivers/pinctrl/pinctrl-lantiq.h b/drivers/pinctrl/pinctrl-lantiq.h
new file mode 100644
index 000000000000..4419d32a0ade
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-lantiq.h
@@ -0,0 +1,194 @@
+/*
+ *  linux/drivers/pinctrl/pinctrl-lantiq.h
+ *  based on linux/drivers/pinctrl/pinctrl-pxa3xx.h
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ *
+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef __PINCTRL_LANTIQ_H
+
+#include <linux/clkdev.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+
+#include "core.h"
+
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+
+#define LTQ_MAX_MUX		4
+#define MFPR_FUNC_MASK		0x3
+
+#define LTQ_PINCONF_PACK(param, arg)		((param) << 16 | (arg))
+#define LTQ_PINCONF_UNPACK_PARAM(conf)		((conf) >> 16)
+#define LTQ_PINCONF_UNPACK_ARG(conf)		((conf) & 0xffff)
+
+enum ltq_pinconf_param {
+	LTQ_PINCONF_PARAM_PULL,
+	LTQ_PINCONF_PARAM_OPEN_DRAIN,
+	LTQ_PINCONF_PARAM_DRIVE_CURRENT,
+	LTQ_PINCONF_PARAM_SLEW_RATE,
+};
+
+struct ltq_cfg_param {
+	const char *property;
+	enum ltq_pinconf_param param;
+};
+
+struct ltq_mfp_pin {
+	const char *name;
+	const unsigned int pin;
+	const unsigned short func[LTQ_MAX_MUX];
+};
+
+struct ltq_pin_group {
+	const char *name;
+	const unsigned mux;
+	const unsigned *pins;
+	const unsigned npins;
+};
+
+struct ltq_pmx_func {
+	const char *name;
+	const char * const *groups;
+	const unsigned num_groups;
+};
+
+struct ltq_pinmux_info {
+	struct device *dev;
+	struct pinctrl_dev *pctrl;
+
+	/* we need to manage up to 5 pad controllers */
+	void __iomem *membase[5];
+
+	/* the descriptor for the subsystem */
+	struct pinctrl_desc *desc;
+
+	/* we expose our pads to the subsystem */
+	struct pinctrl_pin_desc *pads;
+
+	/* the number of pads. this varies between socs */
+	unsigned int num_pads;
+
+	/* these are our multifunction pins */
+	const struct ltq_mfp_pin *mfp;
+	unsigned int num_mfp;
+
+	/* a number of multifunction pins can be grouped together */
+	const struct ltq_pin_group *grps;
+	unsigned int num_grps;
+
+	/* a mapping between function string and id */
+	const struct ltq_pmx_func *funcs;
+	unsigned int num_funcs;
+
+	/* the pinconf options that we are able to read from the DT */
+	const struct ltq_cfg_param *params;
+	unsigned int num_params;
+
+	/* the pad controller can have a irq mapping  */
+	const unsigned *exin;
+	unsigned int num_exin;
+
+	/* we need 5 clocks max */
+	struct clk *clk[5];
+
+	/* soc specific callback used to apply muxing */
+	int (*apply_mux)(struct pinctrl_dev *pctrldev, int pin, int mux);
+};
+
+enum ltq_pin {
+	GPIO0 = 0,
+	GPIO1,
+	GPIO2,
+	GPIO3,
+	GPIO4,
+	GPIO5,
+	GPIO6,
+	GPIO7,
+	GPIO8,
+	GPIO9,
+	GPIO10, /* 10 */
+	GPIO11,
+	GPIO12,
+	GPIO13,
+	GPIO14,
+	GPIO15,
+	GPIO16,
+	GPIO17,
+	GPIO18,
+	GPIO19,
+	GPIO20, /* 20 */
+	GPIO21,
+	GPIO22,
+	GPIO23,
+	GPIO24,
+	GPIO25,
+	GPIO26,
+	GPIO27,
+	GPIO28,
+	GPIO29,
+	GPIO30, /* 30 */
+	GPIO31,
+	GPIO32,
+	GPIO33,
+	GPIO34,
+	GPIO35,
+	GPIO36,
+	GPIO37,
+	GPIO38,
+	GPIO39,
+	GPIO40, /* 40 */
+	GPIO41,
+	GPIO42,
+	GPIO43,
+	GPIO44,
+	GPIO45,
+	GPIO46,
+	GPIO47,
+	GPIO48,
+	GPIO49,
+	GPIO50, /* 50 */
+	GPIO51,
+	GPIO52,
+	GPIO53,
+	GPIO54,
+	GPIO55,
+
+	GPIO64,
+	GPIO65,
+	GPIO66,
+	GPIO67,
+	GPIO68,
+	GPIO69,
+	GPIO70,
+	GPIO71,
+	GPIO72,
+	GPIO73,
+	GPIO74,
+	GPIO75,
+	GPIO76,
+	GPIO77,
+	GPIO78,
+	GPIO79,
+	GPIO80,
+	GPIO81,
+	GPIO82,
+	GPIO83,
+	GPIO84,
+	GPIO85,
+	GPIO86,
+	GPIO87,
+	GPIO88,
+};
+
+extern int ltq_pinctrl_register(struct platform_device *pdev,
+				   struct ltq_pinmux_info *info);
+extern int ltq_pinctrl_unregister(struct platform_device *pdev);
+#endif	/* __PINCTRL_PXA3XX_H */
diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
new file mode 100644
index 000000000000..f8d917d40c92
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-xway.c
@@ -0,0 +1,781 @@
+/*
+ *  linux/drivers/pinctrl/pinmux-xway.c
+ *  based on linux/drivers/pinctrl/pinmux-pxa910.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ *
+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/slab.h></