diff options
author | John W. Linville <linville@tuxdriver.com> | 2012-07-10 16:27:28 -0400 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2012-07-11 15:40:22 -0400 |
commit | 5da7b2e05ec17d8a90ea1f463d3b7d46975ceef2 (patch) | |
tree | 07b65448a598def4b34ca59256835b875d932479 /drivers/net/wimax | |
parent | 650cef38263c0f4c8970265354432be154eef425 (diff) |
i2400m: remove SDIO device support
SDIO support in this driver was intended to support the iwmc3200
device. This hardware never became available to normal humans.
Leaving this driver imposes unwelcome maintenance costs for no clear
benefit.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Diffstat (limited to 'drivers/net/wimax')
-rw-r--r-- | drivers/net/wimax/i2400m/Kconfig | 22 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/Makefile | 8 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/driver.c | 3 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/fw.c | 3 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/i2400m-sdio.h | 157 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/i2400m.h | 13 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/sdio-debug-levels.h | 22 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/sdio-fw.c | 210 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/sdio-rx.c | 301 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/sdio-tx.c | 177 | ||||
-rw-r--r-- | drivers/net/wimax/i2400m/sdio.c | 602 |
11 files changed, 8 insertions, 1510 deletions
diff --git a/drivers/net/wimax/i2400m/Kconfig b/drivers/net/wimax/i2400m/Kconfig index 672de18a776c..71453db14258 100644 --- a/drivers/net/wimax/i2400m/Kconfig +++ b/drivers/net/wimax/i2400m/Kconfig @@ -7,9 +7,6 @@ config WIMAX_I2400M comment "Enable USB support to see WiMAX USB drivers" depends on USB = n -comment "Enable MMC support to see WiMAX SDIO drivers" - depends on MMC = n - config WIMAX_I2400M_USB tristate "Intel Wireless WiMAX Connection 2400 over USB (including 5x50)" depends on WIMAX && USB @@ -21,25 +18,6 @@ config WIMAX_I2400M_USB If unsure, it is safe to select M (module). -config WIMAX_I2400M_SDIO - tristate "Intel Wireless WiMAX Connection 2400 over SDIO" - depends on WIMAX && MMC - select WIMAX_I2400M - help - Select if you have a device based on the Intel WiMAX - Connection 2400 over SDIO. - - If unsure, it is safe to select M (module). - -config WIMAX_IWMC3200_SDIO - bool "Intel Wireless Multicom WiMAX Connection 3200 over SDIO (EXPERIMENTAL)" - depends on WIMAX_I2400M_SDIO - depends on EXPERIMENTAL - select IWMC3200TOP - help - Select if you have a device based on the Intel Multicom WiMAX - Connection 3200 over SDIO. - config WIMAX_I2400M_DEBUG_LEVEL int "WiMAX i2400m debug level" depends on WIMAX_I2400M diff --git a/drivers/net/wimax/i2400m/Makefile b/drivers/net/wimax/i2400m/Makefile index 5d9e018d31af..f6d19c348082 100644 --- a/drivers/net/wimax/i2400m/Makefile +++ b/drivers/net/wimax/i2400m/Makefile @@ -1,7 +1,6 @@ obj-$(CONFIG_WIMAX_I2400M) += i2400m.o obj-$(CONFIG_WIMAX_I2400M_USB) += i2400m-usb.o -obj-$(CONFIG_WIMAX_I2400M_SDIO) += i2400m-sdio.o i2400m-y := \ control.o \ @@ -21,10 +20,3 @@ i2400m-usb-y := \ usb-tx.o \ usb-rx.o \ usb.o - - -i2400m-sdio-y := \ - sdio.o \ - sdio-tx.o \ - sdio-fw.o \ - sdio-rx.o diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index 47cae7150bc1..850b8bc38bee 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -754,8 +754,7 @@ EXPORT_SYMBOL_GPL(i2400m_error_recovery); /* * Alloc the command and ack buffers for boot mode * - * Get the buffers needed to deal with boot mode messages. These - * buffers need to be allocated before the sdio receive irq is setup. + * Get the buffers needed to deal with boot mode messages. */ static int i2400m_bm_buf_alloc(struct i2400m *i2400m) diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index 7cbd7d231e11..7632f8cf09df 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -51,8 +51,7 @@ * firmware. Normal hardware takes only signed firmware. * * On boot mode, in USB, we write to the device using the bulk out - * endpoint and read from it in the notification endpoint. In SDIO we - * talk to it via the write address and read from the read address. + * endpoint and read from it in the notification endpoint. * * Upon entrance to boot mode, the device sends (preceded with a few * zero length packets (ZLPs) on the notification endpoint in USB) a diff --git a/drivers/net/wimax/i2400m/i2400m-sdio.h b/drivers/net/wimax/i2400m/i2400m-sdio.h deleted file mode 100644 index 1d63ffdedfde..000000000000 --- a/drivers/net/wimax/i2400m/i2400m-sdio.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Intel Wireless WiMAX Connection 2400m - * SDIO-specific i2400m driver definitions - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation <linux-wimax@intel.com> - * Brian Bian <brian.bian@intel.com> - * Dirk Brandewie <dirk.j.brandewie@intel.com> - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * Yanir Lubetkin <yanirx.lubetkin@intel.com> - * - Initial implementation - * - * - * This driver implements the bus-specific part of the i2400m for - * SDIO. Check i2400m.h for a generic driver description. - * - * ARCHITECTURE - * - * This driver sits under the bus-generic i2400m driver, providing the - * connection to the device. - * - * When probed, all the function pointers are setup and then the - * bus-generic code called. The generic driver will then use the - * provided pointers for uploading firmware (i2400ms_bus_bm*() in - * sdio-fw.c) and then setting up the device (i2400ms_dev_*() in - * sdio.c). - * - * Once firmware is uploaded, TX functions (sdio-tx.c) are called when - * data is ready for transmission in the TX fifo; then the SDIO IRQ is - * fired and data is available (sdio-rx.c), it is sent to the generic - * driver for processing with i2400m_rx. - */ - -#ifndef __I2400M_SDIO_H__ -#define __I2400M_SDIO_H__ - -#include "i2400m.h" - -/* Host-Device interface for SDIO */ -enum { - I2400M_SDIO_BOOT_RETRIES = 3, - I2400MS_BLK_SIZE = 256, - I2400MS_PL_SIZE_MAX = 0x3E00, - - I2400MS_DATA_ADDR = 0x0, - I2400MS_INTR_STATUS_ADDR = 0x13, - I2400MS_INTR_CLEAR_ADDR = 0x13, - I2400MS_INTR_ENABLE_ADDR = 0x14, - I2400MS_INTR_GET_SIZE_ADDR = 0x2C, - /* The number of ticks to wait for the device to signal that - * it is ready */ - I2400MS_INIT_SLEEP_INTERVAL = 100, - /* How long to wait for the device to settle after reset */ - I2400MS_SETTLE_TIME = 40, - /* The number of msec to wait for IOR after sending IOE */ - IWMC3200_IOR_TIMEOUT = 10, -}; - - -/** - * struct i2400ms - descriptor for a SDIO connected i2400m - * - * @i2400m: bus-generic i2400m implementation; has to be first (see - * it's documentation in i2400m.h). - * - * @func: pointer to our SDIO function - * - * @tx_worker: workqueue struct used to TX data when the bus-generic - * code signals packets are pending for transmission to the device. - * - * @tx_workqueue: workqeueue used for data TX; we don't use the - * system's workqueue as that might cause deadlocks with code in - * the bus-generic driver. The read/write operation to the queue - * is protected with spinlock (tx_lock in struct i2400m) to avoid - * the queue being destroyed in the middle of a the queue read/write - * operation. - * - * @debugfs_dentry: dentry for the SDIO specific debugfs files - * - * Note this value is set to NULL upon destruction; this is - * because some routinges use it to determine if we are inside the - * probe() path or some other path. When debugfs is disabled, - * creation sets the dentry to '(void*) -ENODEV', which is valid - * for the test. - */ -struct i2400ms { - struct i2400m i2400m; /* FIRST! See doc */ - struct sdio_func *func; - - struct work_struct tx_worker; - struct workqueue_struct *tx_workqueue; - char tx_wq_name[32]; - - struct dentry *debugfs_dentry; - - wait_queue_head_t bm_wfa_wq; - int bm_wait_result; - size_t bm_ack_size; - - /* Device is any of the iwmc3200 SKUs */ - unsigned iwmc3200:1; -}; - - -static inline -void i2400ms_init(struct i2400ms *i2400ms) -{ - i2400m_init(&i2400ms->i2400m); -} - - -extern int i2400ms_rx_setup(struct i2400ms *); -extern void i2400ms_rx_release(struct i2400ms *); - -extern int i2400ms_tx_setup(struct i2400ms *); -extern void i2400ms_tx_release(struct i2400ms *); -extern void i2400ms_bus_tx_kick(struct i2400m *); - -extern ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *, - const struct i2400m_bootrom_header *, - size_t, int); -extern ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *, - struct i2400m_bootrom_header *, - size_t); -extern void i2400ms_bus_bm_release(struct i2400m *); -extern int i2400ms_bus_bm_setup(struct i2400m *); - -#endif /* #ifndef __I2400M_SDIO_H__ */ diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index c806d4550212..79c6505b5c20 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -46,7 +46,7 @@ * - bus generic driver (this part) * * The bus specific driver sets up stuff specific to the bus the - * device is connected to (USB, SDIO, PCI, tam-tam...non-authoritative + * device is connected to (USB, PCI, tam-tam...non-authoritative * nor binding list) which is basically the device-model management * (probe/disconnect, etc), moving data from device to kernel and * back, doing the power saving details and reseting the device. @@ -238,14 +238,13 @@ struct i2400m_barker_db; * amount needed for loading firmware, where us dev_start/stop setup * the rest needed to do full data/control traffic. * - * @bus_tx_block_size: [fill] SDIO imposes a 256 block size, USB 16, - * so we have a tx_blk_size variable that the bus layer sets to - * tell the engine how much of that we need. + * @bus_tx_block_size: [fill] USB imposes a 16 block size, but other + * busses will differ. So we have a tx_blk_size variable that the + * bus layer sets to tell the engine how much of that we need. * * @bus_tx_room_min: [fill] Minimum room required while allocating - * TX queue's buffer space for message header. SDIO requires - * 224 bytes and USB 16 bytes. Refer bus specific driver code - * for details. + * TX queue's buffer space for message header. USB requires + * 16 bytes. Refer to bus specific driver code for details. * * @bus_pl_size_max: [fill] Maximum payload size. * diff --git a/drivers/net/wimax/i2400m/sdio-debug-levels.h b/drivers/net/wimax/i2400m/sdio-debug-levels.h deleted file mode 100644 index c51998741301..000000000000 --- a/drivers/net/wimax/i2400m/sdio-debug-levels.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * debug levels control file for the i2400m module's - */ -#ifndef __debug_levels__h__ -#define __debug_levels__h__ - -/* Maximum compile and run time debug level for all submodules */ -#define D_MODULENAME i2400m_sdio -#define D_MASTER CONFIG_WIMAX_I2400M_DEBUG_LEVEL - -#include <linux/wimax/debug.h> - -/* List of all the enabled modules */ -enum d_module { - D_SUBMODULE_DECLARE(main), - D_SUBMODULE_DECLARE(tx), - D_SUBMODULE_DECLARE(rx), - D_SUBMODULE_DECLARE(fw) -}; - - -#endif /* #ifndef __debug_levels__h__ */ diff --git a/drivers/net/wimax/i2400m/sdio-fw.c b/drivers/net/wimax/i2400m/sdio-fw.c deleted file mode 100644 index 8e025418f5be..000000000000 --- a/drivers/net/wimax/i2400m/sdio-fw.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Intel Wireless WiMAX Connection 2400m - * Firmware uploader's SDIO specifics - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation <linux-wimax@intel.com> - * Yanir Lubetkin <yanirx.lubetkin@intel.com> - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - Initial implementation - * - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - Bus generic/specific split for USB - * - * Dirk Brandewie <dirk.j.brandewie@intel.com> - * - Initial implementation for SDIO - * - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - SDIO rehash for changes in the bus-driver model - * - * Dirk Brandewie <dirk.j.brandewie@intel.com> - * - Make it IRQ based, not polling - * - * THE PROCEDURE - * - * See fw.c for the generic description of this procedure. - * - * This file implements only the SDIO specifics. It boils down to how - * to send a command and waiting for an acknowledgement from the - * device. - * - * All this code is sequential -- all i2400ms_bus_bm_*() functions are - * executed in the same thread, except i2400ms_bm_irq() [on its own by - * the SDIO driver]. This makes it possible to avoid locking. - * - * COMMAND EXECUTION - * - * The generic firmware upload code will call i2400m_bus_bm_cmd_send() - * to send commands. - * - * The SDIO devices expects things in 256 byte blocks, so it will pad - * it, compute the checksum (if needed) and pass it to SDIO. - * - * ACK RECEPTION - * - * This works in IRQ mode -- the fw loader says when to wait for data - * and for that it calls i2400ms_bus_bm_wait_for_ack(). - * - * This checks if there is any data available (RX size > 0); if not, - * waits for the IRQ handler to notify about it. Once there is data, - * it is read and passed to the caller. Doing it this way we don't - * need much coordination/locking, and it makes it much more difficult - * for an interrupt to be lost and the wait_for_ack() function getting - * stuck even when data is pending. - */ -#include <linux/mmc/sdio_func.h> -#include "i2400m-sdio.h" - - -#define D_SUBMODULE fw -#include "sdio-debug-levels.h" - - -/* - * Send a boot-mode command to the SDIO function - * - * We use a bounce buffer (i2400m->bm_cmd_buf) because we need to - * touch the header if the RAW flag is not set. - * - * @flags: pass thru from i2400m_bm_cmd() - * @return: cmd_size if ok, < 0 errno code on error. - * - * Note the command is padded to the SDIO block size for the device. - */ -ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *i2400m, - const struct i2400m_bootrom_header *_cmd, - size_t cmd_size, int flags) -{ - ssize_t result; - struct device *dev = i2400m_dev(i2400m); - struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m); - int opcode = _cmd == NULL ? -1 : i2400m_brh_get_opcode(_cmd); - struct i2400m_bootrom_header *cmd; - /* SDIO restriction */ - size_t cmd_size_a = ALIGN(cmd_size, I2400MS_BLK_SIZE); - - d_fnstart(5, dev, "(i2400m %p cmd %p size %zu)\n", - i2400m, _cmd, cmd_size); - result = -E2BIG; - if (cmd_size > I2400M_BM_CMD_BUF_SIZE) - goto error_too_big; - - if (_cmd != i2400m->bm_cmd_buf) - memmove(i2400m->bm_cmd_buf, _cmd, cmd_size); - cmd = i2400m->bm_cmd_buf; - if (cmd_size_a > cmd_size) /* Zero pad space */ - memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size); - if ((flags & I2400M_BM_CMD_RAW) == 0) { - if (WARN_ON(i2400m_brh_get_response_required(cmd) == 0)) - dev_warn(dev, "SW BUG: response_required == 0\n"); - i2400m_bm_cmd_prepare(cmd); - } - d_printf(4, dev, "BM cmd %d: %zu bytes (%zu padded)\n", - opcode, cmd_size, cmd_size_a); - d_dump(5, dev, cmd, cmd_size); - - sdio_claim_host(i2400ms->func); /* Send & check */ - result = sdio_memcpy_toio(i2400ms->func, I2400MS_DATA_ADDR, - i2400m->bm_cmd_buf, cmd_size_a); - sdio_release_host(i2400ms->func); - if (result < 0) { - dev_err(dev, "BM cmd %d: cannot send: %ld\n", - opcode, (long) result); - goto error_cmd_send; - } - result = cmd_size; -error_cmd_send: -error_too_big: - d_fnend(5, dev, "(i2400m %p cmd %p size %zu) = %d\n", - i2400m, _cmd, cmd_size, (int) result); - return result; -} - - -/* - * Read an ack from the device's boot-mode - * - * @i2400m: - * @_ack: pointer to where to store the read data - * @ack_size: how many bytes we should read - * - * Returns: < 0 errno code on error; otherwise, amount of received bytes. - * - * The ACK for a BM command is always at least sizeof(*ack) bytes, so - * check for that. We don't need to check for device reboots - * - */ -ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *i2400m, - struct i2400m_bootrom_header *ack, - size_t ack_size) -{ - ssize_t result; - struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m); - struct sdio_func *func = i2400ms->func; - struct device *dev = &func->dev; - int size; - - BUG_ON(sizeof(*ack) > ack_size); - - d_fnstart(5, dev, "(i2400m %p ack %p size %zu)\n", - i2400m, ack, ack_size); - - result = wait_event_timeout(i2400ms->bm_wfa_wq, - i2400ms->bm_ack_size != -EINPROGRESS, - 2 * HZ); - if (result == 0) { - result = -ETIMEDOUT; - dev_err(dev, "BM: error waiting for an ack\n"); - goto error_timeout; - } - - spin_lock(&i2400m->rx_lock); - result = i2400ms->bm_ack_size; - BUG_ON(result == -EINPROGRESS); - if (result < 0) /* so we exit when rx_release() is called */ - dev_err(dev, "BM: %s failed: %zd\n", __func__, result); - else { - size = min(ack_size, i2400ms->bm_ack_size); - memcpy(ack, i2400m->bm_ack_buf, size); - } - /* - * Remember always to clear the bm_ack_size to -EINPROGRESS - * after the RX data is processed - */ - i2400ms->bm_ack_size = -EINPROGRESS; - spin_unlock(&i2400m->rx_lock); - -error_timeout: - d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %zd\n", - i2400m, ack, ack_size, result); - return result; -} diff --git a/drivers/net/wimax/i2400m/sdio-rx.c b/drivers/net/wimax/i2400m/sdio-rx.c deleted file mode 100644 index fb6396dd115f..000000000000 --- a/drivers/net/wimax/i2400m/sdio-rx.c +++ /dev/null @@ -1,301 +0,0 @@ -/* - * Intel Wireless WiMAX Connection 2400m - * SDIO RX handling - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation <linux-wimax@intel.com> - * Dirk Brandewie <dirk.j.brandewie@intel.com> - * - Initial implementation - * - * - * This handles the RX path on SDIO. - * - * The SDIO bus driver calls the "irq" routine when data is available. - * This is not a traditional interrupt routine since the SDIO bus - * driver calls us from its irq thread context. Because of this - * sleeping in the SDIO RX IRQ routine is okay. - * - * From there on, we obtain the size of the data that is available, - * allocate an skb, copy it and then pass it to the generic driver's - * RX routine [i2400m_rx()]. - * - * ROADMAP - * - * i2400ms_irq() - * i2400ms_rx() - * __i2400ms_rx_get_size() - * i2400m_is_boot_barker() - * i2400m_rx() - * - * i2400ms_rx_setup() - * - * i2400ms_rx_release() - */ -#include <linux/workqueue.h> -#include <linux/wait.h> -#include <linux/skbuff.h> -#include <linux/mmc/sdio.h> -#include <linux/mmc/sdio_func.h> -#include <linux/slab.h> -#include "i2400m-sdio.h" - -#define D_SUBMODULE rx -#include "sdio-debug-levels.h" - -static const __le32 i2400m_ACK_BARKER[4] = { - __constant_cpu_to_le32(I2400M_ACK_BARKER), - __constant_cpu_to_le32(I2400M_ACK_BARKER), - __constant_cpu_to_le32(I2400M_ACK_BARKER), - __constant_cpu_to_le32(I2400M_ACK_BARKER) -}; - - -/* - * Read and return the amount of bytes available for RX - * - * The RX size has to be read like this: byte reads of three - * sequential locations; then glue'em together. - * - * sdio_readl() doesn't work. - */ -static ssize_t __i2400ms_rx_get_size(struct i2400ms *i2400ms) -{ - int ret, cnt, val; - ssize_t rx_size; - unsigned xfer_size_addr; - struct sdio_func *func = i2400ms->func; - struct device *dev = &i2400ms->func->dev; - - d_fnstart(7, dev, "(i2400ms %p)\n", i2400ms); - xfer_size_addr = I2400MS_INTR_GET_SIZE_ADDR; - rx_size = 0; - for (cnt = 0; cnt < 3; cnt++) { - val = sdio_readb(func, xfer_size_addr + cnt, &ret); - if (ret < 0) { - dev_err(dev, "RX: Can't read byte %d of RX size from " - "0x%08x: %d\n", cnt, xfer_size_addr + cnt, ret); - rx_size = ret; - goto error_read; - } - rx_size = rx_size << 8 | (val & 0xff); - } - d_printf(6, dev, "RX: rx_size is %ld\n", (long) rx_size); -error_read: - d_fnend(7, dev, "(i2400ms %p) = %ld\n", i2400ms, (long) rx_size); - return rx_size; -} - - -/* - * Read data from the device (when in normal) - * - * Allocate an SKB of the right size, read the data in and then - * deliver it to the generic layer. - * - * We also check for a reboot barker. That means the device died and - * we have to reboot it. - */ -static -void i2400ms_rx(struct i2400ms *i2400ms) -{ - int ret; - struct sdio_func *func = i2400ms->func; - struct device *dev = &func->dev; - struct i2400m *i2400m = &i2400ms->i2400m; - struct sk_buff *skb; - ssize_t rx_size; - - d_fnstart(7, dev, "(i2400ms %p)\n", i2400ms); - rx_size = __i2400ms_rx_get_size(i2400ms); - if (rx_size < 0) { - ret = rx_size; - goto error_get_size; - } - /* - * Hardware quirk: make sure to clear the INTR status register - * AFTER getting the data transfer size. - */ - sdio_writeb(func, 1, I2400MS_INTR_CLEAR_ADDR, &ret); - - ret = -ENOMEM; - skb = alloc_skb(rx_size, GFP_ATOMIC); - if (NULL == skb) { - dev_err(dev, "RX: unable to alloc skb\n"); - goto error_alloc_skb; - } - ret = sdio_memcpy_fromio(func, skb->data, - I2400MS_DATA_ADDR, rx_size); - if (ret < 0) { - dev_err(dev, "RX: SDIO data read failed: %d\n", ret); - goto error_memcpy_fromio; - } - - rmb(); /* make sure we get boot_mode from dev_reset_handle */ - if (unlikely(i2400m->boot_mode == 1)) { - spin_lock(&i2400m->rx_lock); - i2400ms->bm_ack_size = rx_size; - spin_unlock(&i2400m->rx_lock); - memcpy(i2400m->bm_ack_buf, skb->data, rx_size); - wake_up(&i2400ms->bm_wfa_wq); - d_printf(5, dev, "RX: SDIO boot mode message\n"); - kfree_skb(skb); - goto out; - } - ret = -EIO; - if (unlikely(rx_size < sizeof(__le32))) { - dev_err(dev, "HW BUG? only %zu bytes received\n", rx_size); - goto error_bad_size; - } - if (likely(i2400m_is_d2h_barker(skb->data))) { - skb_put(skb, rx_size); - i2400m_rx(i2400m, skb); - } else if (unlikely(i2400m_is_boot_barker(i2400m, - skb->data, rx_size))) { - ret = i2400m_dev_reset_handle(i2400m, "device rebooted"); - dev_err(dev, "RX: SDIO reboot barker\n"); - kfree_skb(skb); - } else { - i2400m_unknown_barker(i2400m, skb->data, rx_size); - kfree_skb(skb); - } -out: - d_fnend(7, dev, "(i2400ms %p) = void\n", i2400ms); - return; - -error_memcpy_fromio: - kfree_skb(skb); -error_alloc_skb: -error_get_size: -error_bad_size: - d_fnend(7, dev, "(i2400ms %p) = %d\n", i2400ms, ret); -} - - -/* - * Process an interrupt from the SDIO card - * - * FIXME: need to process other events that are not just ready-to-read - * - * Checks there is data ready and then proceeds to read it. - */ -static -void i2400ms_irq(struct sdio_func *func) -{ - int ret; - struct i2400ms *i2400ms = sdio_get_drvdata(func); - struct device *dev = &func->dev; - int val; - - d_fnstart(6, dev, "(i2400ms %p)\n", i2400ms); - val = sdio_readb(func, I2400MS_INTR_STATUS_ADDR, &ret); - if (ret < 0) { - dev_err(dev, "RX: Can't read interrupt status: %d\n", ret); - goto error_no_irq; - } - if (!val) { - dev_err(dev, "RX: BUG? got IRQ but no interrupt ready?\n"); - goto error_no_irq; - } - i2400ms_rx(i2400ms); -error_no_irq: - d_fnend(6, dev, "(i2400ms %p) = void\n", i2400ms); -} - - -/* - * Setup SDIO RX - * - * Hooks up the IRQ handler and then enables IRQs. - */ -int i2400ms_rx_setup(struct i2400ms *i2400ms) -{ - int result; - struct sdio_func *func = i2400ms->func; - struct device *dev = &func->dev; - struct i2400m *i2400m = &i2400ms->i2400m; - - d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms); - - init_waitqueue_head(&i2400ms->bm_wfa_wq); - spin_lock(&i2400m->rx_lock); - i2400ms->bm_wait_result = -EINPROGRESS; - /* - * Before we are about to enable the RX interrupt, make sure - * bm_ack_size is cleared to -EINPROGRESS which indicates - * no RX interrupt happened yet or the previous interrupt - * has been handled, we are ready to take the new interrupt - */ - i2400ms->bm_ack_size = -EINPROGRESS; - spin_unlock(&i2400m->rx_lock); - - sdio_claim_host(func); - result = sdio_claim_irq(func, i2400ms_irq); - if (result < 0) { - dev_err(dev, "Cannot claim IRQ: %d\n", result); - goto error_irq_claim; - } - result = 0; - sdio_writeb(func, 1, I2400MS_INTR_ENABLE_ADDR, &result); - if (result < 0) { - sdio_release_irq(func); - dev_err(dev, "Failed to enable interrupts %d\n", result); - } -error_irq_claim: - sdio_release_host(func); - d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result); - return result; -} - - -/* - * Tear down SDIO RX - * - * Disables IRQs in the device and removes the IRQ handler. - */ -void i2400ms_rx_release(struct i2400ms *i2400ms) -{ - int result; - struct sdio_func *func = i2400ms->func; - struct device *dev = &func->dev; - struct i2400m *i2400m = &i2400ms->i2400m; - - d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms); - spin_lock(&i2400m->rx_lock); - i2400ms->bm_ack_size = -EINTR; - spin_unlock(&i2400m->rx_lock); - wake_up_all(&i2400ms->bm_wfa_wq); - sdio_claim_host(func); - sdio_writeb(func, 0, I2400MS_INTR_ENABLE_ADDR, &result); - sdio_release_irq(func); - sdio_release_host(func); - d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result); -} diff --git a/drivers/net/wimax/i2400m/sdio-tx.c b/drivers/net/wimax/i2400m/sdio-tx.c deleted file mode 100644 index b53cd1c80e3e..000000000000 --- a/drivers/net/wimax/i2400m/sdio-tx.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Intel Wireless WiMAX Connection 2400m - * SDIO TX transaction backends - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation <linux-wimax@intel.com> - * Dirk Brandewie <dirk.j.brandewie@intel.com> - * - Initial implementation - * - * - * Takes the TX messages in the i2400m's driver TX FIFO and sends them - * to the device until there are no more. - * - * If we fail sending the message, we just drop it. There isn't much - * we can do at this point. Most of the traffic is network, which has - * recovery methods for dropped packets. - * - * The SDIO functions are not atomic, so we can't run from the context - * where i2400m->bus_tx_kick() [i2400ms_bus_tx_kick()] is being called - * (some times atomic). Thus, the actual TX work is deferred to a - * workqueue. - * - * ROADMAP - * - * i2400ms_bus_tx_kick() - * i2400ms_tx_submit() [through workqueue] - * - * i2400m_tx_setup() - * - * i2400m_tx_release() - */ -#include <linux/mmc/sdio_func.h> -#include "i2400m-sdio.h" - -#define D_SUBMODULE tx -#include "sdio-debug-levels.h" - - -/* - * Pull TX transations from the TX FIFO and send them to the device - * until there are no more. - */ -static -void i2400ms_tx_submit(struct work_struct *ws) -{ - int result; - struct i2400ms *i2400ms = container_of(ws, struct i2400ms, tx_worker); - struct i2400m *i2400m = &i2400ms->i2400m; - struct sdio_func *func = i2400ms->func; - struct device *dev = &func->dev; < |