isdn: remove hisax driver

With the decline of ISDN, this seems to have become almost completely
obsolete, and even in the past years before that, almost all remaining
users appear to have used mISDN instead.

Birger Harzenetter noted that he is still using i4l/hisax to take
advantage of the 'divert' driver for call diversion, but otherwise uses
mISDN on the same hardware. This is a rare edge case as far as I
can tell, but we are still breaking an actively used work flow
(see https://xkcd.com/1172/).

We debated moving i4l/hisax to staging as an intermediate step, but as
he is not likely to change the setup, and that would just delay breaking
this use case.  The alternatives here are to stay on stable kernels
< 5.2, to create an external driver repository for isdn4linux, or to
add divert functionality to mISDN.

Cc: Birger Harzenetter <WIMPy@yeti.dk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

102 files changed, 0 insertions, 55481 deletions

diff --git a/drivers/isdn/Makefile b/drivers/isdn/Makefile
index e7d3d8f2ad5a..7487f0bbe855 100644
--- a/drivers/isdn/Makefile
+++ b/drivers/isdn/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_ISDN_CAPI)			+= capi/
 obj-$(CONFIG_MISDN)			+= mISDN/
 obj-$(CONFIG_ISDN)			+= hardware/
 obj-$(CONFIG_ISDN_DIVERSION)		+= divert/
-obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax/
 obj-$(CONFIG_ISDN_DRV_LOOP)		+= isdnloop/
 obj-$(CONFIG_HYSDN)			+= hysdn/
 obj-$(CONFIG_ISDN_DRV_GIGASET)		+= gigaset/
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
deleted file mode 100644
index 43d98ccf5ff6..000000000000
--- a/drivers/isdn/hisax/Kconfig
+++ /dev/null
@@ -1,423 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-menu "Passive cards"
-
-config ISDN_DRV_HISAX
-	tristate "HiSax SiemensChipSet driver support"
-	select CRC_CCITT
-	---help---
-	  This is a driver supporting the Siemens chipset on various
-	  ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
-	  S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
-	  compatibles).
-
-	  HiSax is just the name of this driver, not the name of any hardware.
-
-	  If you have a card with such a chipset, you should say Y here and
-	  also to the configuration option of the driver for your particular
-	  card, below.
-
-if ISDN_DRV_HISAX
-
-comment "D-channel protocol features"
-
-config HISAX_EURO
-	bool "HiSax Support for EURO/DSS1"
-	help
-	  Say Y or N according to the D-channel protocol which your local
-	  telephone service company provides.
-
-	  The call control protocol E-DSS1 is used in most European countries.
-	  If unsure, say Y.
-
-config DE_AOC
-	bool "Support for german chargeinfo"
-	depends on HISAX_EURO
-	help
-	  If you want that the HiSax hardware driver sends messages to the
-	  upper level of the isdn code on each AOCD (Advice Of Charge, During
-	  the call -- transmission of the fee information during a call) and
-	  on each AOCE (Advice Of Charge, at the End of the call --
-	  transmission of fee information at the end of the call), say Y here.
-	  This works only in Germany.
-
-config HISAX_NO_SENDCOMPLETE
-	bool "Disable sending complete"
-	depends on HISAX_EURO
-	help
-	  If you have trouble with some ugly exchanges or you live in
-	  Australia select this option.
-
-config HISAX_NO_LLC
-	bool "Disable sending low layer compatibility"
-	depends on HISAX_EURO
-	help
-	  If you have trouble with some ugly exchanges try to select this
-	  option.
-
-config HISAX_NO_KEYPAD
-	bool "Disable keypad protocol option"
-	depends on HISAX_EURO
-	help
-	  If you like to send special dial strings including * or # without
-	  using the keypad protocol, select this option.
-
-config HISAX_1TR6
-	bool "HiSax Support for german 1TR6"
-	help
-	  Say Y or N according to the D-channel protocol which your local
-	  telephone service company provides.
-
-	  1TR6 is an old call control protocol which was used in Germany
-	  before E-DSS1 was established. Nowadays, all new lines in Germany
-	  use E-DSS1.
-
-config HISAX_NI1
-	bool "HiSax Support for US NI1"
-	help
-	  Enable this if you like to use ISDN in US on a NI1 basic rate
-	  interface.
-
-config HISAX_MAX_CARDS
-	int "Maximum number of cards supported by HiSax"
-	default "8"
-	help
-	  This option allows you to specify the maximum number of cards which
-	  the HiSax driver will be able to handle.  
-
-comment "HiSax supported cards"
-
-config HISAX_16_0
-	bool "Teles 16.0/8.0"
-	depends on ISA
-	help
-	  This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
-	  and many compatibles.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port/shmem settings.
-
-config HISAX_16_3
-	bool "Teles 16.3 or PNP or PCMCIA"
-	help
-	  This enables HiSax support for the Teles ISDN-cards S0-16.3 the
-	  Teles/Creatix PnP and the Teles PCMCIA.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_TELESPCI
-	bool "Teles PCI"
-	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN)))
-	help
-	  This enables HiSax support for the Teles PCI.
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
-
-config HISAX_S0BOX
-	bool "Teles S0Box"
-	help
-	  This enables HiSax support for the Teles/Creatix parallel port
-	  S0BOX.  See <file:Documentation/isdn/README.HiSax> on how to
-	  configure it.
-
-config HISAX_AVM_A1
-	bool "AVM A1 (Fritz)"
-	depends on ISA
-	help
-	  This enables HiSax support for the AVM A1 (aka "Fritz").
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_FRITZPCI
-	bool "AVM PnP/PCI (Fritz!PnP/PCI)"
-	depends on BROKEN || !PPC64
-	help
-	  This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
-
-config HISAX_AVM_A1_PCMCIA
-	bool "AVM A1 PCMCIA (Fritz)"
-	help
-	  This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
-
-config HISAX_ELSA
-	bool "Elsa cards"
-	help
-	  This enables HiSax support for the Elsa Mircolink ISA cards, for the
-	  Elsa Quickstep series cards and Elsa PCMCIA.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_IX1MICROR2
-	bool "ITK ix1-micro Revision 2"
-	depends on ISA
-	help
-	  This enables HiSax support for the ITK ix1-micro Revision 2 card.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_DIEHLDIVA
-	bool "Eicon.Diehl Diva cards"
-	help
-	  This enables HiSax support for the Eicon.Diehl Diva none PRO
-	  versions passive ISDN cards.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_ASUSCOM
-	bool "ASUSCOM ISA cards"
-	depends on ISA
-	help
-	  This enables HiSax support for the AsusCom and their OEM versions
-	  passive ISDN ISA cards.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_TELEINT
-	bool "TELEINT cards"
-	depends on ISA
-	help
-	  This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_HFCS
-	bool "HFC-S based cards"
-	depends on ISA
-	help
-	  This enables HiSax support for the HFC-S 2BDS0 based cards, like
-	  teles 16.3c.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_SEDLBAUER
-	bool "Sedlbauer cards"
-	help
-	  This enables HiSax support for the Sedlbauer passive ISDN cards.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using the different cards, a different D-channel protocol, or
-	  non-standard IRQ/port settings.
-
-config HISAX_SPORTSTER
-	bool "USR Sportster internal TA"
-	depends on ISA
-	help
-	  This enables HiSax support for the USR Sportster internal TA card.
-
-	  See <file:Documentation/isdn/README.HiSax> on how to configure it
-	  using a different D-channel protocol, or non-standard IRQ/port
-	  settings.
-
-config HISAX_MIC
-	bool "MIC card"