diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-01-13 11:14:05 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-01-13 11:14:05 -0800 |
commit | 1c5ff2ab7bba6757e7663302c5905e6404de324a (patch) | |
tree | 7f72452032fa5134ba6c6761556f0de04dfec6e7 /drivers/input/touchscreen | |
parent | d6a322774cb7096ca683fc46ddc9482e02ee6133 (diff) | |
parent | 009f773836513960d3982e80c86e266d25528563 (diff) |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- new driver for eGalaxTouch serial touchscreen
- new driver for TS-4800 touchscreen
- an update for Goodix touchscreen driver
- PS/2 mouse module was reworked to limit number of protocols we try on
pass-through ports to speed up their detection time
- wacom_w8001 touchscreen driver now reports pen and touch via separate
instances of input devices
- other driver changes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits)
Input: elantech - mark protocols v2 and v3 as semi-mt
Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE
Input: gpio-keys - fix check for disabling unsupported keys
Input: omap-keypad - remove dead check
Input: ti_am335x_tsc - fix HWPEN interrupt handling
Input: omap-keypad - set tasklet data earlier
Input: rohm_bu21023 - fix handling of retrying firmware update
Input: ALPS - report v3 pinnacle trackstick device only if is present
Input: ALPS - detect trackstick presence for v7 protocol
Input: pcap_ts - use to_delayed_work
Input: bma150 - constify bma150_cfg structure
Input: i8042 - add Fujitsu Lifebook U745 to the nomux list
Input: egalax_ts_serial - fix potential NULL dereference on error
Input: uinput - sanity check on ff_effects_max and EV_FF
Input: uinput - rework ABS validation
Input: uinput - add new UINPUT_DEV_SETUP and UI_ABS_SETUP ioctl
Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen"
Input: goodix - add axis swapping and axis inversion support
Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_send
Input: goodix - add power management support
...
Diffstat (limited to 'drivers/input/touchscreen')
-rw-r--r-- | drivers/input/touchscreen/Kconfig | 27 | ||||
-rw-r--r-- | drivers/input/touchscreen/Makefile | 2 | ||||
-rw-r--r-- | drivers/input/touchscreen/egalax_ts_serial.c | 194 | ||||
-rw-r--r-- | drivers/input/touchscreen/goodix.c | 513 | ||||
-rw-r--r-- | drivers/input/touchscreen/pcap_ts.c | 2 | ||||
-rw-r--r-- | drivers/input/touchscreen/pixcir_i2c_ts.c | 41 | ||||
-rw-r--r-- | drivers/input/touchscreen/rohm_bu21023.c | 2 | ||||
-rw-r--r-- | drivers/input/touchscreen/ti_am335x_tsc.c | 2 | ||||
-rw-r--r-- | drivers/input/touchscreen/ts4800-ts.c | 216 | ||||
-rw-r--r-- | drivers/input/touchscreen/wacom_w8001.c | 325 |
10 files changed, 1162 insertions, 162 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index ae33da7ab51f..53a97b379c9f 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -295,6 +295,16 @@ config TOUCHSCREEN_EGALAX To compile this driver as a module, choose M here: the module will be called egalax_ts. +config TOUCHSCREEN_EGALAX_SERIAL + tristate "EETI eGalax serial touchscreen" + select SERIO + help + Say Y here to enable support for serial connected EETI + eGalax touch panels. + + To compile this driver as a module, choose M here: the + module will be called egalax_ts_serial. + config TOUCHSCREEN_FT6236 tristate "FT6236 I2C touchscreen" depends on I2C @@ -324,6 +334,7 @@ config TOUCHSCREEN_FUJITSU config TOUCHSCREEN_GOODIX tristate "Goodix I2C touchscreen" depends on I2C + depends on GPIOLIB help Say Y here if you have the Goodix touchscreen (such as one installed in Onda v975w tablets) connected to your @@ -927,6 +938,22 @@ config TOUCHSCREEN_TOUCHIT213 To compile this driver as a module, choose M here: the module will be called touchit213. +config TOUCHSCREEN_TS4800 + tristate "TS-4800 touchscreen" + depends on HAS_IOMEM && OF + select MFD_SYSCON + select INPUT_POLLDEV + help + Say Y here if you have a touchscreen on a TS-4800 board. + + On TS-4800, the touchscreen is not handled directly by Linux but by + a companion FPGA. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ts4800_ts. + config TOUCHSCREEN_TSC_SERIO tristate "TSC-10/25/40 serial touchscreen support" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index cbaa6abb08da..968ff12e3132 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELAN) += elants_i2c.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o +obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o obj-$(CONFIG_TOUCHSCREEN_FT6236) += ft6236.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o @@ -68,6 +69,7 @@ obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o +obj-$(CONFIG_TOUCHSCREEN_TS4800) += ts4800-ts.o obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE) += tsc200x-core.o obj-$(CONFIG_TOUCHSCREEN_TSC2004) += tsc2004.o diff --git a/drivers/input/touchscreen/egalax_ts_serial.c b/drivers/input/touchscreen/egalax_ts_serial.c new file mode 100644 index 000000000000..657bbae608c8 --- /dev/null +++ b/drivers/input/touchscreen/egalax_ts_serial.c @@ -0,0 +1,194 @@ +/* + * EETI Egalax serial touchscreen driver + * + * Copyright (c) 2015 Zoltán Böszörményi <zboszor@pr.hu> + * + * based on the + * + * Hampshire serial touchscreen driver (Copyright (c) 2010 Adam Bennett) + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> + +#define DRIVER_DESC "EETI Egalax serial touchscreen driver" + +/* + * Definitions & global arrays. + */ + +#define EGALAX_FORMAT_MAX_LENGTH 6 +#define EGALAX_FORMAT_START_BIT BIT(7) +#define EGALAX_FORMAT_PRESSURE_BIT BIT(6) +#define EGALAX_FORMAT_TOUCH_BIT BIT(0) +#define EGALAX_FORMAT_RESOLUTION_MASK 0x06 + +#define EGALAX_MIN_XC 0 +#define EGALAX_MAX_XC 0x4000 +#define EGALAX_MIN_YC 0 +#define EGALAX_MAX_YC 0x4000 + +/* + * Per-touchscreen data. + */ +struct egalax { + struct input_dev *input; + struct serio *serio; + int idx; + u8 data[EGALAX_FORMAT_MAX_LENGTH]; + char phys[32]; +}; + +static void egalax_process_data(struct egalax *egalax) +{ + struct input_dev *dev = egalax->input; + u8 *data = egalax->data; + u16 x, y; + u8 shift; + u8 mask; + + shift = 3 - ((data[0] & EGALAX_FORMAT_RESOLUTION_MASK) >> 1); + mask = 0xff >> (shift + 1); + + x = (((u16)(data[1] & mask) << 7) | (data[2] & 0x7f)) << shift; + y = (((u16)(data[3] & mask) << 7) | (data[4] & 0x7f)) << shift; + + input_report_key(dev, BTN_TOUCH, data[0] & EGALAX_FORMAT_TOUCH_BIT); + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + input_sync(dev); +} + +static irqreturn_t egalax_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct egalax *egalax = serio_get_drvdata(serio); + int pkt_len; + + egalax->data[egalax->idx++] = data; + + if (likely(egalax->data[0] & EGALAX_FORMAT_START_BIT)) { + pkt_len = egalax->data[0] & EGALAX_FORMAT_PRESSURE_BIT ? 6 : 5; + if (pkt_len == egalax->idx) { + egalax_process_data(egalax); + egalax->idx = 0; + } + } else { + dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n", + egalax->data[0]); + egalax->idx = 0; + } + + return IRQ_HANDLED; +} + +/* + * egalax_connect() is the routine that is called when someone adds a + * new serio device that supports egalax protocol and registers it as + * an input device. This is usually accomplished using inputattach. + */ +static int egalax_connect(struct serio *serio, struct serio_driver *drv) +{ + struct egalax *egalax; + struct input_dev *input_dev; + int error; + + egalax = kzalloc(sizeof(struct egalax), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!egalax || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + egalax->serio = serio; + egalax->input = input_dev; + snprintf(egalax->phys, sizeof(egalax->phys), + "%s/input0", serio->phys); + + input_dev->name = "EETI eGalaxTouch Serial TouchScreen"; + input_dev->phys = egalax->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_EGALAX; + input_dev->id.product = 0; + input_dev->id.version = 0x0001; + input_dev->dev.parent = &serio->dev; + + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, + EGALAX_MIN_XC, EGALAX_MAX_XC, 0, 0); + input_set_abs_params(input_dev, ABS_Y, + EGALAX_MIN_YC, EGALAX_MAX_YC, 0, 0); + + serio_set_drvdata(serio, egalax); + + error = serio_open(serio, drv); + if (error) + goto err_reset_drvdata; + + error = input_register_device(input_dev); + if (error) + goto err_close_serio; + + return 0; + +err_close_serio: + serio_close(serio); +err_reset_drvdata: + serio_set_drvdata(serio, NULL); +err_free_mem: + input_free_device(input_dev); + kfree(egalax); + return error; +} + +static void egalax_disconnect(struct serio *serio) +{ + struct egalax *egalax = serio_get_drvdata(serio); + + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_unregister_device(egalax->input); + kfree(egalax); +} + +/* + * The serio driver structure. + */ + +static const struct serio_device_id egalax_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_EGALAX, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, egalax_serio_ids); + +static struct serio_driver egalax_drv = { + .driver = { + .name = "egalax", + }, + .description = DRIVER_DESC, + .id_table = egalax_serio_ids, + .interrupt = egalax_interrupt, + .connect = egalax_connect, + .disconnect = egalax_disconnect, +}; +module_serio_driver(egalax_drv); + +MODULE_AUTHOR("Zoltán Böszörményi <zboszor@pr.hu>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 4d113c9e4b77..240b16f3ee97 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -2,6 +2,7 @@ * Driver for Goodix Touchscreens * * Copyright (c) 2014 Red Hat Inc. + * Copyright (c) 2015 K. Merker <merker@debian.org> * * This code is based on gt9xx.c authored by andrew@goodix.com: * @@ -16,6 +17,8 @@ #include <linux/kernel.h> #include <linux/dmi.h> +#include <linux/firmware.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/input/mt.h> @@ -33,11 +36,24 @@ struct goodix_ts_data { struct input_dev *input_dev; int abs_x_max; int abs_y_max; + bool swapped_x_y; + bool inverted_x; + bool inverted_y; unsigned int max_touch_num; unsigned int int_trigger_type; - bool rotated_screen; + int cfg_len; + struct gpio_desc *gpiod_int; + struct gpio_desc *gpiod_rst; + u16 id; + u16 version; + const char *cfg_name; + struct completion firmware_loading_complete; + unsigned long irq_flags; }; +#define GOODIX_GPIO_INT_NAME "irq" +#define GOODIX_GPIO_RST_NAME "reset" + #define GOODIX_MAX_HEIGHT 4096 #define GOODIX_MAX_WIDTH 4096 #define GOODIX_INT_TRIGGER 1 @@ -45,8 +61,13 @@ struct goodix_ts_data { #define GOODIX_MAX_CONTACTS 10 #define GOODIX_CONFIG_MAX_LENGTH 240 +#define GOODIX_CONFIG_911_LENGTH 186 +#define GOODIX_CONFIG_967_LENGTH 228 /* Register defines */ +#define GOODIX_REG_COMMAND 0x8040 +#define GOODIX_CMD_SCREEN_OFF 0x05 + #define GOODIX_READ_COOR_ADDR 0x814E #define GOODIX_REG_CONFIG_DATA 0x8047 #define GOODIX_REG_ID 0x8140 @@ -115,6 +136,63 @@ static int goodix_i2c_read(struct i2c_client *client, return ret < 0 ? ret : (ret != ARRAY_SIZE(msgs) ? -EIO : 0); } +/** + * goodix_i2c_write - write data to a register of the i2c slave device. + * + * @client: i2c device. + * @reg: the register to write to. + * @buf: raw data buffer to write. + * @len: length of the buffer to write + */ +static int goodix_i2c_write(struct i2c_client *client, u16 reg, const u8 *buf, + unsigned len) +{ + u8 *addr_buf; + struct i2c_msg msg; + int ret; + + addr_buf = kmalloc(len + 2, GFP_KERNEL); + if (!addr_buf) + return -ENOMEM; + + addr_buf[0] = reg >> 8; + addr_buf[1] = reg & 0xFF; + memcpy(&addr_buf[2], buf, len); + + msg.flags = 0; + msg.addr = client->addr; + msg.buf = addr_buf; + msg.len = len + 2; + + ret = i2c_transfer(client->adapter, &msg, 1); + kfree(addr_buf); + return ret < 0 ? ret : (ret != 1 ? -EIO : 0); +} + +static int goodix_i2c_write_u8(struct i2c_client *client, u16 reg, u8 value) +{ + return goodix_i2c_write(client, reg, &value, sizeof(value)); +} + +static int goodix_get_cfg_len(u16 id) +{ + switch (id) { + case 911: + case 9271: + case 9110: + case 927: + case 928: + return GOODIX_CONFIG_911_LENGTH; + + case 912: + case 967: + return GOODIX_CONFIG_967_LENGTH; + + default: + return GOODIX_CONFIG_MAX_LENGTH; + } +} + static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) { int touch_num; @@ -155,10 +233,13 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data) int input_y = get_unaligned_le16(&coor_data[3]); int input_w = get_unaligned_le16(&coor_data[5]); - if (ts->rotated_screen) { + /* Inversions have to happen before axis swapping */ + if (ts->inverted_x) input_x = ts->abs_x_max - input_x; + if (ts->inverted_y) input_y = ts->abs_y_max - input_y; - } + if (ts->swapped_x_y) + swap(input_x, input_y); input_mt_slot(ts->input_dev, id); input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true); @@ -202,21 +283,195 @@ static void goodix_process_events(struct goodix_ts_data *ts) */ static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id) { - static const u8 end_cmd[] = { - GOODIX_READ_COOR_ADDR >> 8, - GOODIX_READ_COOR_ADDR & 0xff, - 0 - }; struct goodix_ts_data *ts = dev_id; goodix_process_events(ts); - if (i2c_master_send(ts->client, end_cmd, sizeof(end_cmd)) < 0) + if (goodix_i2c_write_u8(ts->client, GOODIX_READ_COOR_ADDR, 0) < 0) dev_err(&ts->client->dev, "I2C write end_cmd error\n"); return IRQ_HANDLED; } +static void goodix_free_irq(struct goodix_ts_data *ts) +{ + devm_free_irq(&ts->client->dev, ts->client->irq, ts); +} + +static int goodix_request_irq(struct goodix_ts_data *ts) +{ + return devm_request_threaded_irq(&ts->client->dev, ts->client->irq, + NULL, goodix_ts_irq_handler, + ts->irq_flags, ts->client->name, ts); +} + +/** + * goodix_check_cfg - Checks if config fw is valid + * + * @ts: goodix_ts_data pointer + * @cfg: firmware config data + */ +static int goodix_check_cfg(struct goodix_ts_data *ts, + const struct firmware *cfg) +{ + int i, raw_cfg_len; + u8 check_sum = 0; + + if (cfg->size > GOODIX_CONFIG_MAX_LENGTH) { + dev_err(&ts->client->dev, + "The length of the config fw is not correct"); + return -EINVAL; + } + + raw_cfg_len = cfg->size - 2; + for (i = 0; i < raw_cfg_len; i++) + check_sum += cfg->data[i]; + check_sum = (~check_sum) + 1; + if (check_sum != cfg->data[raw_cfg_len]) { + dev_err(&ts->client->dev, + "The checksum of the config fw is not correct"); + return -EINVAL; + } + + if (cfg->data[raw_cfg_len + 1] != 1) { + dev_err(&ts->client->dev, + "Config fw must have Config_Fresh register set"); + return -EINVAL; + } + + return 0; +} + +/** + * goodix_send_cfg - Write fw config to device + * + * @ts: goodix_ts_data pointer + * @cfg: config firmware to write to device + */ +static int goodix_send_cfg(struct goodix_ts_data *ts, + const struct firmware *cfg) +{ + int error; + + error = goodix_check_cfg(ts, cfg); + if (error) + return error; + + error = goodix_i2c_write(ts->client, GOODIX_REG_CONFIG_DATA, cfg->data, + cfg->size); + if (error) { + dev_err(&ts->client->dev, "Failed to write config data: %d", + error); + return error; + } + dev_dbg(&ts->client->dev, "Config sent successfully."); + + /* Let the firmware reconfigure itself, so sleep for 10ms */ + usleep_range(10000, 11000); + + return 0; +} + +static int goodix_int_sync(struct goodix_ts_data *ts) +{ + int error; + + error = gpiod_direction_output(ts->gpiod_int, 0); + if (error) + return error; + + msleep(50); /* T5: 50ms */ + + error = gpiod_direction_input(ts->gpiod_int); + if (error) + return error; + + return 0; +} + +/** + * goodix_reset - Reset device during power on + * + * @ts: goodix_ts_data pointer + */ +static int goodix_reset(struct goodix_ts_data *ts) +{ + int error; + + /* begin select I2C slave addr */ + error = gpiod_direction_output(ts->gpiod_rst, 0); + if (error) + return error; + + msleep(20); /* T2: > 10ms */ + + /* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */ + error = gpiod_direction_output(ts->gpiod_int, ts->client->addr == 0x14); + if (error) + return error; + + usleep_range(100, 2000); /* T3: > 100us */ + + error = gpiod_direction_output(ts->gpiod_rst, 1); + if (error) + return error; + + usleep_range(6000, 10000); /* T4: > 5ms */ + + /* end select I2C slave addr */ + error = gpiod_direction_input(ts->gpiod_rst); + if (error) + return error; + + error = goodix_int_sync(ts); + if (error) + return error; + + return 0; +} + +/** + * goodix_get_gpio_config - Get GPIO config from ACPI/DT + * + * @ts: goodix_ts_data pointer + */ +static int goodix_get_gpio_config(struct goodix_ts_data *ts) +{ + int error; + struct device *dev; + struct gpio_desc *gpiod; + + if (!ts->client) + return -EINVAL; + dev = &ts->client->dev; + + /* Get the interrupt GPIO pin number */ + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN); + if (IS_ERR(gpiod)) { + error = PTR_ERR(gpiod); + if (error != -EPROBE_DEFER) + dev_dbg(dev, "Failed to get %s GPIO: %d\n", + GOODIX_GPIO_INT_NAME, error); + return error; + } + + ts->gpiod_int = gpiod; + + /* Get the reset line GPIO pin number */ + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_IN); + if (IS_ERR(gpiod)) { + error = PTR_ERR(gpiod); + if (error != -EPROBE_DEFER) + dev_dbg(dev, "Failed to get %s GPIO: %d\n", + GOODIX_GPIO_RST_NAME, error); + return error; + } + + ts->gpiod_rst = gpiod; + + return 0; +} + /** * goodix_read_config - Read the embedded configuration of the panel * @@ -230,14 +485,15 @@ static void goodix_read_config(struct goodix_ts_data *ts) int error; error = goodix_i2c_read(ts->client, GOODIX_REG_CONFIG_DATA, - config, - GOODIX_CONFIG_MAX_LENGTH); + config, ts->cfg_len); if (error) { dev_warn(&ts->client->dev, "Error reading config (%d), using defaults\n", error); ts->abs_x_max = GOODIX_MAX_WIDTH; ts->abs_y_max = GOODIX_MAX_HEIGHT; + if (ts->swapped_x_y) + swap(ts->abs_x_max, ts->abs_y_max); ts->int_trigger_type = GOODIX_INT_TRIGGER; ts->max_touch_num = GOODIX_MAX_CONTACTS; return; @@ -245,6 +501,8 @@ static void goodix_read_config(struct goodix_ts_data *ts) ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]); ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]); + if (ts->swapped_x_y) + swap(ts->abs_x_max, ts->abs_y_max); ts->int_trigger_type = config[TRIGGER_LOC] & 0x03; ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f; if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) { @@ -252,42 +510,45 @@ static void goodix_read_config(struct goodix_ts_data *ts) "Invalid config, using defaults\n"); ts->abs_x_max = GOODIX_MAX_WIDTH; ts->abs_y_max = GOODIX_MAX_HEIGHT; + if (ts->swapped_x_y) + swap(ts->abs_x_max, ts->abs_y_max); ts->max_touch_num = GOODIX_MAX_CONTACTS; } - ts->rotated_screen = dmi_check_system(rotated_screen); - if (ts->rotated_screen) + if (dmi_check_system(rotated_screen)) { + ts->inverted_x = true; + ts->inverted_y = true; dev_dbg(&ts->client->dev, "Applying '180 degrees rotated screen' quirk\n"); + } } /** * goodix_read_version - Read goodix touchscreen version * - * @client: the i2c client - * @version: output buffer containing the version on success - * @id: output buffer containing the id on success + * @ts: our goodix_ts_data pointer */ -static int goodix_read_version(struct i2c_client *client, u16 *version, u16 *id) +static int goodix_read_version(struct goodix_ts_data *ts) { int error; u8 buf[6]; char id_str[5]; - error = goodix_i2c_read(client, GOODIX_REG_ID, buf, sizeof(buf)); + error = goodix_i2c_read(ts->client, GOODIX_REG_ID, buf, sizeof(buf)); if (error) { - dev_err(&client->dev, "read version failed: %d\n", error); + dev_err(&ts->client->dev, "read version failed: %d\n", error); return error; } memcpy(id_str, buf, 4); id_str[4] = 0; - if (kstrtou16(id_str, 10, id)) - *id = 0x1001; + if (kstrtou16(id_str, 10, &ts->id)) + ts->id = 0x1001; - *version = get_unaligned_le16(&buf[4]); + ts->version = get_unaligned_le16(&buf[4]); - dev_info(&client->dev, "ID %d, version: %04x\n", *id, *version); + dev_info(&ts->client->dev, "ID %d, version: %04x\n", ts->id, + ts->version); return 0; } @@ -321,13 +582,10 @@ static int goodix_i2c_test(struct i2c_client *client) * goodix_request_input_dev - Allocate, populate and register the input device * * @ts: our goodix_ts_data pointer - * @version: device firmware version - * @id: device ID * * Must be called during probe */ -static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version, - u16 id) +static int goodix_request_input_dev(struct goodix_ts_data *ts) { int error; @@ -351,8 +609,8 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version, ts->input_dev->phys = "input/ts"; ts->input_dev->id.bustype = BUS_I2C; ts->input_dev->id.vendor = 0x0416; - ts->input_dev->id.product = id; - ts->input_dev->id.version = version; + ts->input_dev->id.product = ts->id; + ts->input_dev->id.version = ts->version; error = input_register_device(ts->input_dev); if (error) { @@ -364,13 +622,75 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version, return 0; } +/** + * goodix_configure_dev - Finish device initialization + * + * @ts: our goodix_ts_data pointer + * + * Must be called from probe to finish initialization of the device. + * Contains the common initialization code for both devices that + * declare gpio pins and devices that do not. It is either called + * directly from probe or from request_firmware_wait callback. + */ +static int goodix_configure_dev(struct goodix_ts_data *ts) +{ + int error; + + ts->swapped_x_y = device_property_read_bool(&ts->client->dev, + "touchscreen-swapped-x-y"); + ts->inverted_x = device_property_read_bool(&ts->client->dev, + "touchscreen-inverted-x"); + ts->inverted_y = device_property_read_bool(&ts->client->dev, + "touchscreen-inverted-y"); + + goodix_read_config(ts); + + error = goodix_request_input_dev(ts); + if (error) + return error; + + ts->irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT; + error = goodix_request_irq(ts); + if (error) { + dev_err(&ts->client->dev, "request IRQ failed: %d\n", error); + return error; + } + + return 0; +} + +/** + * goodix_config_cb - Callback to finish device init + * + * @ts: our goodix_ts_data pointer + * + * request_firmware_wait callback that finishes + * initialization of the device. + */ +static void goodix_config_cb(const struct firmware *cfg, void *ctx) +{ + struct goodix_ts_data *ts = ctx; + int error; + + if (cfg) { + /* send device configuration to the firmware */ + error = goodix_send_cfg(ts, cfg); + if (error) + goto err_release_cfg; + } + + goodix_configure_dev(ts); + +err_release_cfg: + release_firmware(cfg); + complete_all(&ts->firmware_loading_complete); +} + static int goodix_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct goodix_ts_data *ts; - unsigned long irq_flags; int error; - u16 version_info, id_info; dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); @@ -385,6 +705,20 @@ static int goodix_ts_probe(struct i2c_client *client, ts->client = client; i2c_set_clientdata(client, ts); + init_completion(&ts->firmware_loading_complete); + + error = goodix_get_gpio_config(ts); + if (error) + return error; + + if (ts->gpiod_int && ts->gpiod_rst) { + /* reset the controller */ + error = goodix_reset(ts); + if (error) { + dev_err(&client->dev, "Controller reset failed.\n"); + return error; + } + } error = goodix_i2c_test(client); if (error) { @@ -392,30 +726,125 @@ static int goodix_ts_probe(struct i2c_client *client, return error; } - error = goodix_read_version(client, &version_info, &id_info); + error = goodix_read_version(ts); if (error) { dev_err(&client->dev, "Read version failed.\n"); return error; } - goodix_read_config(ts); + ts->cfg_len = goodix_get_cfg_len(ts->id); + + if (ts->gpiod_int && ts->gpiod_rst) { + /* update device config */ + ts->cfg_name = devm_kasprintf(&client->dev, GFP_KERNEL, + "goodix_%d_cfg.bin", ts->id); + if (!ts->cfg_name) + return -ENOMEM; + + error = request_firmware_nowait(THIS_MODULE, true, ts->cfg_name, + &client->dev, GFP_KERNEL, ts, + goodix_config_cb); + if (error) { + dev_err(&client->dev, + "Failed to invoke firmware loader: %d\n", + error); + return error; + } - error = goodix_request_input_dev(ts, version_info, id_info); - if (error) - return error; + return 0; + } else { + error = goodix_configure_dev(ts); + if (error) + return error; + } + + return 0; +} + +static int goodix_ts_remove(struct i2c_client *client) +{ + struct goodix_ts_data *ts = i2c_get_clientdata(client); + + if (ts->gpiod_int && ts->gpiod_rst) + wait_for_completion(&ts->firmware_loading_complete); + + return 0; +} + +static int __maybe_unused goodix_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct goodix_ts_data *ts = i2c_get_clientdata(client); + int error; - irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT; - error = devm_request_threaded_irq(&ts->client->dev, client->irq, - NULL, goodix_ts_irq_handler, - irq_flags, client->name, ts); + /* We need gpio pins to suspend/resume */ + if (!ts->gpiod_int || !ts->gpiod_rst) + return 0; + + wait_for_completion(&ts->firmware_loading_complete); + + /* Free IRQ as IRQ pin is used as output in the suspend sequence */ + goodix_free_irq(ts); + + /* Output LOW on the INT pin for 5 ms */ + error = gpiod_direction_output(ts->gpiod_int, 0); if (error) { - dev_err(&client->dev, "request IRQ failed: %d\n", error); + goodix_request_irq(ts); return error; } + usleep_range(5000, 6000); + + error = goodix_i2c_write_u8(ts->client, GOODIX_REG_COMMAND, + GOODIX_CMD_SCREEN_OFF); + if (error) { + dev_err(&ts->client->dev, "Screen off command failed\n"); + gpiod_direction_input(ts->gpiod_int); + goodix_request_irq(ts); + return -EAGAIN; + } + + /* + * The datasheet specifies that the interval between sending screen-off + * command and wake-up should be longer than 58 ms. To avoid waking up + * sooner, delay 58ms here. + */ + msleep(58); + return 0; +} + +static int __maybe_unused goodix_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct goodix_ts_data *ts = i2c_get_clientdata(client); + int error; + + if (!ts->gpiod_int || !ts->gpiod_rst) + return 0; + + /* + * Exit sleep mode by outputting HIGH level to INT pin + * for 2ms~5ms. + */ + error = gpiod_direction_output(ts->gpiod_int, 1); + if (error) + return error; + + usleep_range(2000, 5000); + + error = goodix_int_sync(ts); + if (error) + return error; + + error = goodix_request_irq(ts); + if (error) + return error; + return 0; } +static SIMPLE_DEV_PM_OPS(goodix_pm_ops, goodix_suspend, goodix_resume); + static const struct i2c_device_id goodix_ts_id[] = { { "GDIX1001:00", 0 }, { } @@ -446,11 +875,13 @@ MODULE_DEVICE_TABLE(of, goodix_of_match); static struct i2c_driver goodix_ts_driver = { .probe = goodix_ts_probe, + .remove = goodix_ts_remove, .id_table = goodix_ts_id, .driver = { .name = "Goodix-TS", .acpi_match_table = ACPI_PTR(goodix_acpi_match), .of_match_table = of_match_ptr(goodix_of_match), + .pm = &goodix_pm_ops, }, }; module_i2c_driver(goodix_ts_driver); diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c index 23a354a392ae..0e3fc419a3cf 100644 --- a/drivers/input/touchscreen/pcap_ts.c +++ b/drivers/input/touchscreen/pcap_ts.c @@ -87,7 +87,7 @@ static void pcap_ts_read_xy(void *data, u16 res[2]) static void pcap_ts_work(struct work_struct *work) { - struct delayed_work *dw = container_of(work, struct delayed_work, work); + struct delayed_work *dw = to_delayed_work(work); struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work); u8 ch[2]; diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index 4b961ad9f0b5..09523a3d3f23 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -38,6 +38,8 @@ struct pixcir_i2c_ts_data { struct input_dev *input; struct gpio_desc *gpio_attb; struct gpio_desc *gpio_reset; + struct gpio_desc *gpio_enable; + struct gpio_desc *gpio_wake; const struct pixcir_i2c_chip_data *chip; int max_fingers; /* Max fingers supported in this instance */ bool running; @@ -208,6 +210,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts, struct device *dev = &ts->client->dev; int ret; + if (mode == PIXCIR_POWER_ACTIVE || mode == PIXCIR_POWER_IDLE) { + if (ts->gpio_wake) + gpiod_set_value_cansleep(ts->gpio_wake, 1); + } + ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE); if (ret < 0) { dev_err(dev, "%s: can't read reg 0x%x : %d\n", @@ -228,6 +235,11 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts, return ret; |